1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TV101WUM_NL6 71 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 77 45NA WUXGA PANEL DSI Video Mode panel 78 79config DRM_PANEL_DSI_CM 80 tristate "Generic DSI command mode panels" 81 depends on OF 82 depends on DRM_MIPI_DSI 83 depends on BACKLIGHT_CLASS_DEVICE 84 help 85 DRM panel driver for DSI command mode panels with support for 86 embedded and external backlights. 87 88config DRM_PANEL_LVDS 89 tristate "Generic LVDS panel driver" 90 depends on OF 91 depends on BACKLIGHT_CLASS_DEVICE 92 select VIDEOMODE_HELPERS 93 help 94 This driver supports LVDS panels that don't require device-specific 95 handling of power supplies or control signals. It implements automatic 96 backlight handling if the panel is attached to a backlight controller. 97 98config DRM_PANEL_SIMPLE 99 tristate "support for simple panels (other than eDP ones)" 100 depends on OF 101 depends on BACKLIGHT_CLASS_DEVICE 102 depends on PM 103 select VIDEOMODE_HELPERS 104 help 105 DRM panel driver for dumb non-eDP panels that need at most a regulator 106 and a GPIO to be powered up. Optionally a backlight can be attached so 107 that it can be automatically turned off when the panel goes into a 108 low power state. 109 110config DRM_PANEL_EDP 111 tristate "support for simple Embedded DisplayPort panels" 112 depends on OF 113 depends on BACKLIGHT_CLASS_DEVICE 114 depends on PM 115 select VIDEOMODE_HELPERS 116 select DRM_DISPLAY_DP_HELPER 117 select DRM_DISPLAY_HELPER 118 select DRM_DP_AUX_BUS 119 select DRM_KMS_HELPER 120 help 121 DRM panel driver for dumb eDP panels that need at most a regulator and 122 a GPIO to be powered up. Optionally a backlight can be attached so 123 that it can be automatically turned off when the panel goes into a 124 low power state. 125 126config DRM_PANEL_EBBG_FT8719 127 tristate "EBBG FT8719 panel driver" 128 depends on OF 129 depends on DRM_MIPI_DSI 130 depends on BACKLIGHT_CLASS_DEVICE 131 help 132 Say Y here if you want to enable support for the EBBG FT8719 133 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 134 The panel has a resolution of 1080x2246. It provides a MIPI DSI 135 interface to the host. 136 137config DRM_PANEL_ELIDA_KD35T133 138 tristate "Elida KD35T133 panel driver" 139 depends on OF 140 depends on DRM_MIPI_DSI 141 depends on BACKLIGHT_CLASS_DEVICE 142 help 143 Say Y here if you want to enable support for the Elida 144 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 145 system interfaces. 146 147config DRM_PANEL_FEIXIN_K101_IM2BA02 148 tristate "Feixin K101 IM2BA02 panel" 149 depends on OF 150 depends on DRM_MIPI_DSI 151 depends on BACKLIGHT_CLASS_DEVICE 152 help 153 Say Y here if you want to enable support for the Feixin K101 IM2BA02 154 4-lane 800x1280 MIPI DSI panel. 155 156config DRM_PANEL_FEIYANG_FY07024DI26A30D 157 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 158 depends on OF 159 depends on DRM_MIPI_DSI 160 depends on BACKLIGHT_CLASS_DEVICE 161 help 162 Say Y if you want to enable support for panels based on the 163 Feiyang FY07024DI26A30-D MIPI-DSI interface. 164 165config DRM_PANEL_HIMAX_HX8394 166 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 167 depends on OF 168 depends on DRM_MIPI_DSI 169 depends on BACKLIGHT_CLASS_DEVICE 170 help 171 Say Y if you want to enable support for panels based on the 172 Himax HX8394 controller, such as the HannStar HSD060BHW4 173 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 174 175 If M is selected the module will be called panel-himax-hx8394. 176 177config DRM_PANEL_ILITEK_IL9322 178 tristate "Ilitek ILI9322 320x240 QVGA panels" 179 depends on OF && SPI 180 select REGMAP 181 help 182 Say Y here if you want to enable support for Ilitek IL9322 183 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 184 185config DRM_PANEL_ILITEK_ILI9341 186 tristate "Ilitek ILI9341 240x320 QVGA panels" 187 depends on OF && SPI 188 select DRM_KMS_HELPER 189 select DRM_GEM_DMA_HELPER 190 depends on BACKLIGHT_CLASS_DEVICE 191 select DRM_MIPI_DBI 192 help 193 Say Y here if you want to enable support for Ilitek IL9341 194 QVGA (240x320) RGB panels. support serial & parallel rgb 195 interface. 196 197config DRM_PANEL_ILITEK_ILI9881C 198 tristate "Ilitek ILI9881C-based panels" 199 depends on OF 200 depends on DRM_MIPI_DSI 201 depends on BACKLIGHT_CLASS_DEVICE 202 help 203 Say Y if you want to enable support for panels based on the 204 Ilitek ILI9881c controller. 205 206config DRM_PANEL_INNOLUX_EJ030NA 207 tristate "Innolux EJ030NA 320x480 LCD panel" 208 depends on OF && SPI 209 select REGMAP_SPI 210 help 211 Say Y here to enable support for the Innolux/Chimei EJ030NA 212 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 213 and LDK handheld gaming consoles. 214 215config DRM_PANEL_INNOLUX_P079ZCA 216 tristate "Innolux P079ZCA panel" 217 depends on OF 218 depends on DRM_MIPI_DSI 219 depends on BACKLIGHT_CLASS_DEVICE 220 help 221 Say Y here if you want to enable support for Innolux P079ZCA 222 TFT-LCD modules. The panel has a 1024x768 resolution and uses 223 24 bit RGB per pixel. It provides a MIPI DSI interface to 224 the host and has a built-in LED backlight. 225 226config DRM_PANEL_JADARD_JD9365DA_H3 227 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y here if you want to enable support for Jadard JD9365DA-H3 233 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 234 800RGBx1280 dots at maximum. 235 236config DRM_PANEL_JDI_LT070ME05000 237 tristate "JDI LT070ME05000 WUXGA DSI panel" 238 depends on OF 239 depends on DRM_MIPI_DSI 240 depends on BACKLIGHT_CLASS_DEVICE 241 help 242 Say Y here if you want to enable support for JDI DSI video mode 243 panel as found in Google Nexus 7 (2013) devices. 244 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 245 24 bit per pixel. 246 247config DRM_PANEL_JDI_LPM102A188A 248 tristate "JDI LPM102A188A DSI panel" 249 depends on OF && GPIOLIB 250 depends on DRM_MIPI_DSI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for JDI LPM102A188A DSI 254 command mode panel as found in Google Pixel C devices. 255 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface 256 to the host. 257 258config DRM_PANEL_JDI_R63452 259 tristate "JDI R63452 Full HD DSI panel" 260 depends on OF 261 depends on DRM_MIPI_DSI 262 depends on BACKLIGHT_CLASS_DEVICE 263 help 264 Say Y here if you want to enable support for the JDI R63452 265 DSI command mode panel as found in Xiaomi Mi 5 Devices. 266 267config DRM_PANEL_KHADAS_TS050 268 tristate "Khadas TS050 panel" 269 depends on OF 270 depends on DRM_MIPI_DSI 271 depends on BACKLIGHT_CLASS_DEVICE 272 help 273 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 274 panel module. The panel has a 1080x1920 resolution and uses 275 24 bit RGB per pixel. It provides a MIPI DSI interface to 276 the host, a built-in LED backlight and touch controller. 277 278config DRM_PANEL_KINGDISPLAY_KD097D04 279 tristate "Kingdisplay kd097d04 panel" 280 depends on OF 281 depends on DRM_MIPI_DSI 282 depends on BACKLIGHT_CLASS_DEVICE 283 help 284 Say Y here if you want to enable support for Kingdisplay kd097d04 285 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 286 24 bit RGB per pixel. It provides a MIPI DSI interface to 287 the host and has a built-in LED backlight. 288 289config DRM_PANEL_LEADTEK_LTK050H3146W 290 tristate "Leadtek LTK050H3146W panel" 291 depends on OF 292 depends on DRM_MIPI_DSI 293 depends on BACKLIGHT_CLASS_DEVICE 294 help 295 Say Y here if you want to enable support for Leadtek LTK050H3146W 296 TFT-LCD modules. The panel has a 720x1280 resolution and uses 297 24 bit RGB per pixel. It provides a MIPI DSI interface to 298 the host and has a built-in LED backlight. 299 300config DRM_PANEL_LEADTEK_LTK500HD1829 301 tristate "Leadtek LTK500HD1829 panel" 302 depends on OF 303 depends on DRM_MIPI_DSI 304 depends on BACKLIGHT_CLASS_DEVICE 305 help 306 Say Y here if you want to enable support for Kingdisplay kd097d04 307 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 308 24 bit RGB per pixel. It provides a MIPI DSI interface to 309 the host and has a built-in LED backlight. 310 311config DRM_PANEL_SAMSUNG_LD9040 312 tristate "Samsung LD9040 RGB/SPI panel" 313 depends on OF && SPI 314 depends on BACKLIGHT_CLASS_DEVICE 315 select VIDEOMODE_HELPERS 316 317config DRM_PANEL_LG_LB035Q02 318 tristate "LG LB035Q024573 RGB panel" 319 depends on GPIOLIB && OF && SPI 320 help 321 Say Y here if you want to enable support for the LB035Q02 RGB panel 322 (found on the Gumstix Overo Palo35 board). To compile this driver as 323 a module, choose M here. 324 325config DRM_PANEL_LG_LG4573 326 tristate "LG4573 RGB/SPI panel" 327 depends on OF && SPI 328 select VIDEOMODE_HELPERS 329 help 330 Say Y here if you want to enable support for LG4573 RGB panel. 331 To compile this driver as a module, choose M here. 332 333config DRM_PANEL_MAGNACHIP_D53E6EA8966 334 tristate "Magnachip D53E6EA8966 DSI panel" 335 depends on OF && SPI 336 depends on DRM_MIPI_DSI 337 depends on BACKLIGHT_CLASS_DEVICE 338 select DRM_MIPI_DBI 339 help 340 DRM panel driver for the Samsung AMS495QA01 panel controlled 341 with the Magnachip D53E6EA8966 panel IC. This panel receives 342 video data via DSI but commands via 9-bit SPI using DBI. 343 344config DRM_PANEL_NEC_NL8048HL11 345 tristate "NEC NL8048HL11 RGB panel" 346 depends on GPIOLIB && OF && SPI 347 help 348 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 349 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 350 as a module, choose M here. 351 352config DRM_PANEL_NEWVISION_NV3051D 353 tristate "NewVision NV3051D DSI panel" 354 depends on OF 355 depends on DRM_MIPI_DSI 356 depends on BACKLIGHT_CLASS_DEVICE 357 help 358 This driver supports the NV3051D based panel found on the Anbernic 359 RG353P and RG353V. 360 361config DRM_PANEL_NEWVISION_NV3052C 362 tristate "NewVision NV3052C RGB/SPI panel" 363 depends on OF && SPI 364 depends on BACKLIGHT_CLASS_DEVICE 365 select DRM_MIPI_DBI 366 help 367 Say Y here if you want to enable support for the panels built 368 around the NewVision NV3052C display controller. 369 370config DRM_PANEL_NOVATEK_NT35510 371 tristate "Novatek NT35510 RGB panel driver" 372 depends on OF 373 depends on DRM_MIPI_DSI 374 depends on BACKLIGHT_CLASS_DEVICE 375 help 376 Say Y here if you want to enable support for the panels built 377 around the Novatek NT35510 display controller, such as some 378 Hydis panels. 379 380config DRM_PANEL_NOVATEK_NT35560 381 tristate "Novatek NT35560 DSI command mode panel" 382 depends on OF 383 depends on DRM_MIPI_DSI 384 depends on BACKLIGHT_CLASS_DEVICE 385 select VIDEOMODE_HELPERS 386 help 387 Say Y here if you want to enable the Novatek NT35560 display 388 controller. This panel supports DSI in both command and video 389 mode. This supports several panels such as Sony ACX424AKM and 390 ACX424AKP. 391 392config DRM_PANEL_NOVATEK_NT35950 393 tristate "Novatek NT35950 DSI panel" 394 depends on OF 395 depends on DRM_MIPI_DSI 396 depends on BACKLIGHT_CLASS_DEVICE 397 help 398 Say Y here if you want to enable support for the panels built 399 around the Novatek NT35950 display controller, such as some 400 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 401 mobile phones. 402 403config DRM_PANEL_NOVATEK_NT36523 404 tristate "Novatek NT36523 panel driver" 405 depends on OF 406 depends on DRM_MIPI_DSI 407 depends on BACKLIGHT_CLASS_DEVICE 408 help 409 Say Y here if you want to enable support for the panels built 410 around the Novatek NT36523 display controller, such as some 411 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. 412 413config DRM_PANEL_NOVATEK_NT36672A 414 tristate "Novatek NT36672A DSI panel" 415 depends on OF 416 depends on DRM_MIPI_DSI 417 depends on BACKLIGHT_CLASS_DEVICE 418 help 419 Say Y here if you want to enable support for the panels built 420 around the Novatek NT36672A display controller, such as some 421 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 422 423config DRM_PANEL_NOVATEK_NT39016 424 tristate "Novatek NT39016 RGB/SPI panel" 425 depends on OF && SPI 426 depends on BACKLIGHT_CLASS_DEVICE 427 select REGMAP_SPI 428 help 429 Say Y here if you want to enable support for the panels built 430 around the Novatek NT39016 display controller. 431 432config DRM_PANEL_MANTIX_MLAF057WE51 433 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 434 depends on OF 435 depends on DRM_MIPI_DSI 436 depends on BACKLIGHT_CLASS_DEVICE 437 help 438 Say Y here if you want to enable support for the Mantix 439 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 440 has a resolution of 720x1440 pixels, a built in backlight and touch 441 controller. 442 443config DRM_PANEL_OLIMEX_LCD_OLINUXINO 444 tristate "Olimex LCD-OLinuXino panel" 445 depends on OF 446 depends on I2C 447 depends on BACKLIGHT_CLASS_DEVICE 448 select CRC32 449 help 450 The panel is used with different sizes LCDs, from 480x272 to 451 1280x800, and 24 bit per pixel. 452 453 Say Y here if you want to enable support for Olimex Ltd. 454 LCD-OLinuXino panel. 455 456config DRM_PANEL_ORISETECH_OTA5601A 457 tristate "Orise Technology ota5601a RGB/SPI panel" 458 depends on SPI 459 depends on BACKLIGHT_CLASS_DEVICE 460 select REGMAP_SPI 461 help 462 Say Y here if you want to enable support for the panels built 463 around the Orise Technology OTA9601A display controller. 464 465config DRM_PANEL_ORISETECH_OTM8009A 466 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 467 depends on OF 468 depends on DRM_MIPI_DSI 469 depends on BACKLIGHT_CLASS_DEVICE 470 help 471 Say Y here if you want to enable support for Orise Technology 472 otm8009a 480x800 dsi 2dl panel. 473 474config DRM_PANEL_OSD_OSD101T2587_53TS 475 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 476 depends on OF 477 depends on DRM_MIPI_DSI 478 depends on BACKLIGHT_CLASS_DEVICE 479 help 480 Say Y here if you want to enable support for One Stop Displays 481 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 482 483config DRM_PANEL_PANASONIC_VVX10F034N00 484 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 485 depends on OF 486 depends on DRM_MIPI_DSI 487 depends on BACKLIGHT_CLASS_DEVICE 488 help 489 Say Y here if you want to enable support for Panasonic VVX10F034N00 490 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 491 Xperia Z2 tablets 492 493config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 494 tristate "Raspberry Pi 7-inch touchscreen panel" 495 depends on DRM_MIPI_DSI 496 help 497 Say Y here if you want to enable support for the Raspberry 498 Pi 7" Touchscreen. To compile this driver as a module, 499 choose M here. 500 501config DRM_PANEL_RAYDIUM_RM67191 502 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 503 depends on OF 504 depends on DRM_MIPI_DSI 505 depends on BACKLIGHT_CLASS_DEVICE 506 help 507 Say Y here if you want to enable support for Raydium RM67191 FHD 508 (1080x1920) DSI panel. 509 510config DRM_PANEL_RAYDIUM_RM68200 511 tristate "Raydium RM68200 720x1280 DSI video mode panel" 512 depends on OF 513 depends on DRM_MIPI_DSI 514 depends on BACKLIGHT_CLASS_DEVICE 515 help 516 Say Y here if you want to enable support for Raydium RM68200 517 720x1280 DSI video mode panel. 518 519config DRM_PANEL_RONBO_RB070D30 520 tristate "Ronbo Electronics RB070D30 panel" 521 depends on OF 522 depends on DRM_MIPI_DSI 523 depends on BACKLIGHT_CLASS_DEVICE 524 help 525 Say Y here if you want to enable support for Ronbo Electronics 526 RB070D30 1024x600 DSI panel. 527 528config DRM_PANEL_SAMSUNG_ATNA33XC20 529 tristate "Samsung ATNA33XC20 eDP panel" 530 depends on OF 531 depends on BACKLIGHT_CLASS_DEVICE 532 depends on PM 533 select DRM_DISPLAY_DP_HELPER 534 select DRM_DISPLAY_HELPER 535 select DRM_DP_AUX_BUS 536 help 537 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 538 be handled by the DRM_PANEL_SIMPLE driver because its power 539 sequencing is non-standard. 540 541config DRM_PANEL_SAMSUNG_DB7430 542 tristate "Samsung DB7430-based DPI panels" 543 depends on OF && SPI && GPIOLIB 544 depends on BACKLIGHT_CLASS_DEVICE 545 select DRM_MIPI_DBI 546 help 547 Say Y here if you want to enable support for the Samsung 548 DB7430 DPI display controller used in such devices as the 549 LMS397KF04 480x800 DPI panel. 550 551config DRM_PANEL_SAMSUNG_S6D16D0 552 tristate "Samsung S6D16D0 DSI video mode panel" 553 depends on OF 554 depends on DRM_MIPI_DSI 555 select VIDEOMODE_HELPERS 556 557config DRM_PANEL_SAMSUNG_S6D27A1 558 tristate "Samsung S6D27A1 DPI panel driver" 559 depends on OF && SPI && GPIOLIB 560 select DRM_MIPI_DBI 561 help 562 Say Y here if you want to enable support for the Samsung 563 S6D27A1 DPI 480x800 panel. 564 565 This panel can be found in Samsung Galaxy Ace 2 566 GT-I8160 mobile phone. 567 568config DRM_PANEL_SAMSUNG_S6D7AA0 569 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller" 570 depends on OF 571 depends on BACKLIGHT_CLASS_DEVICE 572 select DRM_MIPI_DSI 573 select VIDEOMODE_HELPERS 574 575config DRM_PANEL_SAMSUNG_S6E3HA2 576 tristate "Samsung S6E3HA2 DSI video mode panel" 577 depends on OF 578 depends on DRM_MIPI_DSI 579 depends on BACKLIGHT_CLASS_DEVICE 580 select VIDEOMODE_HELPERS 581 582config DRM_PANEL_SAMSUNG_S6E63J0X03 583 tristate "Samsung S6E63J0X03 DSI command mode panel" 584 depends on OF 585 depends on DRM_MIPI_DSI 586 depends on BACKLIGHT_CLASS_DEVICE 587 select VIDEOMODE_HELPERS 588 589config DRM_PANEL_SAMSUNG_S6E63M0 590 tristate "Samsung S6E63M0 RGB panel" 591 depends on OF 592 depends on BACKLIGHT_CLASS_DEVICE 593 help 594 Say Y here if you want to enable support for Samsung S6E63M0 595 AMOLED LCD panel. This panel can be accessed using SPI or 596 DSI. 597 598config DRM_PANEL_SAMSUNG_S6E63M0_SPI 599 tristate "Samsung S6E63M0 RGB SPI interface" 600 depends on SPI 601 depends on DRM_PANEL_SAMSUNG_S6E63M0 602 default DRM_PANEL_SAMSUNG_S6E63M0 603 select DRM_MIPI_DBI 604 help 605 Say Y here if you want to be able to access the Samsung 606 S6E63M0 panel using SPI. 607 608config DRM_PANEL_SAMSUNG_S6E63M0_DSI 609 tristate "Samsung S6E63M0 RGB DSI interface" 610 depends on DRM_MIPI_DSI 611 depends on DRM_PANEL_SAMSUNG_S6E63M0 612 help 613 Say Y here if you want to be able to access the Samsung 614 S6E63M0 panel using DSI. 615 616config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 617 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 618 depends on OF 619 select DRM_MIPI_DSI 620 select VIDEOMODE_HELPERS 621 622config DRM_PANEL_SAMSUNG_S6E8AA0 623 tristate "Samsung S6E8AA0 DSI video mode panel" 624 depends on OF 625 select DRM_MIPI_DSI 626 select VIDEOMODE_HELPERS 627 628config DRM_PANEL_SAMSUNG_SOFEF00 629 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 630 depends on OF 631 depends on DRM_MIPI_DSI 632 depends on BACKLIGHT_CLASS_DEVICE 633 select VIDEOMODE_HELPERS 634 help 635 Say Y or M here if you want to enable support for the Samsung AMOLED 636 command mode panels found in the OnePlus 6/6T smartphones. 637 638 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 639 640config DRM_PANEL_SEIKO_43WVF1G 641 tristate "Seiko 43WVF1G panel" 642 depends on OF 643 depends on BACKLIGHT_CLASS_DEVICE 644 select VIDEOMODE_HELPERS 645 help 646 Say Y here if you want to enable support for the Seiko 647 43WVF1G controller for 800x480 LCD panels 648 649config DRM_PANEL_SHARP_LQ101R1SX01 650 tristate "Sharp LQ101R1SX01 panel" 651 depends on OF 652 depends on DRM_MIPI_DSI 653 depends on BACKLIGHT_CLASS_DEVICE 654 help 655 Say Y here if you want to enable support for Sharp LQ101R1SX01 656 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 657 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 658 the host and has a built-in LED backlight. 659 660 To compile this driver as a module, choose M here: the module 661 will be called panel-sharp-lq101r1sx01. 662 663config DRM_PANEL_SHARP_LS037V7DW01 664 tristate "Sharp LS037V7DW01 VGA LCD panel" 665 depends on GPIOLIB && OF && REGULATOR 666 help 667 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 668 (480x640) LCD panel (found on the TI SDP3430 board). 669 670config DRM_PANEL_SHARP_LS043T1LE01 671 tristate "Sharp LS043T1LE01 qHD video mode panel" 672 depends on OF 673 depends on DRM_MIPI_DSI 674 depends on BACKLIGHT_CLASS_DEVICE 675 help 676 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 677 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 678 679config DRM_PANEL_SHARP_LS060T1SX01 680 tristate "Sharp LS060T1SX01 FullHD video mode panel" 681 depends on OF 682 depends on DRM_MIPI_DSI 683 depends on BACKLIGHT_CLASS_DEVICE 684 help 685 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 686 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 687 Bundle. 688 689config DRM_PANEL_SITRONIX_ST7701 690 tristate "Sitronix ST7701 panel driver" 691 depends on OF 692 depends on DRM_MIPI_DSI 693 depends on BACKLIGHT_CLASS_DEVICE 694 help 695 Say Y here if you want to enable support for the Sitronix 696 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 697 system interfaces. 698 699config DRM_PANEL_SITRONIX_ST7703 700 tristate "Sitronix ST7703 based MIPI touchscreen panels" 701 depends on OF 702 depends on DRM_MIPI_DSI 703 depends on BACKLIGHT_CLASS_DEVICE 704 help 705 Say Y here if you want to enable support for Sitronix ST7703 based 706 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 707 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 708 in backlight and touch controller. 709 Touch input support is provided by the goodix driver and needs to be 710 selected separately. 711 712config DRM_PANEL_SITRONIX_ST7789V 713 tristate "Sitronix ST7789V panel" 714 depends on OF && SPI 715 depends on BACKLIGHT_CLASS_DEVICE 716 help 717 Say Y here if you want to enable support for the Sitronix 718 ST7789V controller for 240x320 LCD panels 719 720config DRM_PANEL_SONY_ACX565AKM 721 tristate "Sony ACX565AKM panel" 722 depends on GPIOLIB && OF && SPI 723 depends on BACKLIGHT_CLASS_DEVICE 724 help 725 Say Y here if you want to enable support for the Sony ACX565AKM 726 800x600 3.5" panel (found on the Nokia N900). 727 728config DRM_PANEL_SONY_TD4353_JDI 729 tristate "Sony TD4353 JDI panel" 730 depends on GPIOLIB && OF 731 depends on DRM_MIPI_DSI 732 depends on BACKLIGHT_CLASS_DEVICE 733 help 734 Say Y here if you want to enable support for the Sony Tama 735 TD4353 JDI command mode panel as found on some Sony Xperia 736 XZ2 and XZ2 Compact smartphones. 737 738config DRM_PANEL_SONY_TULIP_TRULY_NT35521 739 tristate "Sony Tulip Truly NT35521 panel" 740 depends on GPIOLIB && OF 741 depends on DRM_MIPI_DSI 742 depends on BACKLIGHT_CLASS_DEVICE 743 help 744 Say Y here if you want to enable support for the Sony Tulip 745 NT35521 1280x720 video mode panel as found on Sony Xperia M4 746 Aqua phone. 747 748config DRM_PANEL_STARTEK_KD070FHFID015 749 tristate "STARTEK KD070FHFID015 panel" 750 depends on OF 751 depends on DRM_MIPI_DSI 752 depends on BACKLIGHT_CLASS_DEVICE 753 help 754 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel 755 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display 756 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to 757 the host, a built-in LED backlight and touch controller. 758 759config DRM_PANEL_TDO_TL070WSH30 760 tristate "TDO TL070WSH30 DSI panel" 761 depends on OF 762 depends on DRM_MIPI_DSI 763 depends on BACKLIGHT_CLASS_DEVICE 764 help 765 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 766 panel module. The panel has a 1024×600 resolution and uses 767 24 bit RGB per pixel. It provides a MIPI DSI interface to 768 the host, a built-in LED backlight and touch controller. 769 770config DRM_PANEL_TPO_TD028TTEC1 771 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 772 depends on OF && SPI 773 depends on BACKLIGHT_CLASS_DEVICE 774 help 775 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 776 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 777 778config DRM_PANEL_TPO_TD043MTEA1 779 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 780 depends on GPIOLIB && OF && REGULATOR && SPI 781 help 782 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 783 4.3" panel (found on the OMAP3 Pandora board). 784 785config DRM_PANEL_TPO_TPG110 786 tristate "TPO TPG 800x400 panel" 787 depends on OF && SPI && GPIOLIB 788 depends on BACKLIGHT_CLASS_DEVICE 789 help 790 Say Y here if you want to enable support for TPO TPG110 791 400CH LTPS TFT LCD Single Chip Digital Driver for up to 792 800x400 LCD panels. 793 794config DRM_PANEL_TRULY_NT35597_WQXGA 795 tristate "Truly WQXGA" 796 depends on OF 797 depends on DRM_MIPI_DSI 798 help 799 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 800 Video Mode panel 801 802config DRM_PANEL_VISIONOX_RM69299 803 tristate "Visionox RM69299" 804 depends on OF 805 depends on DRM_MIPI_DSI 806 help 807 Say Y here if you want to enable support for Visionox 808 RM69299 DSI Video Mode panel. 809 810config DRM_PANEL_VISIONOX_VTDR6130 811 tristate "Visionox VTDR6130" 812 depends on OF 813 depends on DRM_MIPI_DSI 814 depends on BACKLIGHT_CLASS_DEVICE 815 help 816 Say Y here if you want to enable support for Visionox 817 VTDR6130 1080x2400 AMOLED DSI panel. 818 819config DRM_PANEL_VISIONOX_R66451 820 tristate "Visionox R66451" 821 depends on OF 822 depends on DRM_MIPI_DSI 823 depends on BACKLIGHT_CLASS_DEVICE 824 select DRM_DISPLAY_DP_HELPER 825 select DRM_DISPLAY_HELPER 826 help 827 Say Y here if you want to enable support for Visionox 828 R66451 1080x2340 AMOLED DSI panel. 829 830config DRM_PANEL_WIDECHIPS_WS2401 831 tristate "Widechips WS2401 DPI panel driver" 832 depends on SPI && GPIOLIB 833 depends on BACKLIGHT_CLASS_DEVICE 834 select DRM_MIPI_DBI 835 help 836 Say Y here if you want to enable support for the Widechips WS2401 DPI 837 480x800 display controller used in panels such as Samsung LMS380KF01. 838 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 839 840config DRM_PANEL_XINPENG_XPP055C272 841 tristate "Xinpeng XPP055C272 panel driver" 842 depends on OF 843 depends on DRM_MIPI_DSI 844 depends on BACKLIGHT_CLASS_DEVICE 845 help 846 Say Y here if you want to enable support for the Xinpeng 847 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 848 system interfaces. 849endmenu 850