1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ARM_VERSATILE 12 tristate "ARM Versatile panel driver" 13 depends on OF 14 depends on MFD_SYSCON 15 select VIDEOMODE_HELPERS 16 help 17 This driver supports the ARM Versatile panels connected to ARM 18 reference designs. The panel is detected using special registers 19 in the Versatile family syscon registers. 20 21config DRM_PANEL_LVDS 22 tristate "Generic LVDS panel driver" 23 depends on OF 24 depends on BACKLIGHT_CLASS_DEVICE 25 select VIDEOMODE_HELPERS 26 help 27 This driver supports LVDS panels that don't require device-specific 28 handling of power supplies or control signals. It implements automatic 29 backlight handling if the panel is attached to a backlight controller. 30 31config DRM_PANEL_SIMPLE 32 tristate "support for simple panels" 33 depends on OF 34 depends on BACKLIGHT_CLASS_DEVICE 35 select VIDEOMODE_HELPERS 36 help 37 DRM panel driver for dumb panels that need at most a regulator and 38 a GPIO to be powered up. Optionally a backlight can be attached so 39 that it can be automatically turned off when the panel goes into a 40 low power state. 41 42config DRM_PANEL_FEIYANG_FY07024DI26A30D 43 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 44 depends on OF 45 depends on DRM_MIPI_DSI 46 depends on BACKLIGHT_CLASS_DEVICE 47 help 48 Say Y if you want to enable support for panels based on the 49 Feiyang FY07024DI26A30-D MIPI-DSI interface. 50 51config DRM_PANEL_ILITEK_IL9322 52 tristate "Ilitek ILI9322 320x240 QVGA panels" 53 depends on OF && SPI 54 select REGMAP 55 help 56 Say Y here if you want to enable support for Ilitek IL9322 57 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 58 59config DRM_PANEL_ILITEK_ILI9881C 60 tristate "Ilitek ILI9881C-based panels" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y if you want to enable support for panels based on the 66 Ilitek ILI9881c controller. 67 68config DRM_PANEL_INNOLUX_P079ZCA 69 tristate "Innolux P079ZCA panel" 70 depends on OF 71 depends on DRM_MIPI_DSI 72 depends on BACKLIGHT_CLASS_DEVICE 73 help 74 Say Y here if you want to enable support for Innolux P079ZCA 75 TFT-LCD modules. The panel has a 1024x768 resolution and uses 76 24 bit RGB per pixel. It provides a MIPI DSI interface to 77 the host and has a built-in LED backlight. 78 79config DRM_PANEL_JDI_LT070ME05000 80 tristate "JDI LT070ME05000 WUXGA DSI panel" 81 depends on OF 82 depends on DRM_MIPI_DSI 83 depends on BACKLIGHT_CLASS_DEVICE 84 help 85 Say Y here if you want to enable support for JDI DSI video mode 86 panel as found in Google Nexus 7 (2013) devices. 87 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 88 24 bit per pixel. 89 90config DRM_PANEL_KINGDISPLAY_KD097D04 91 tristate "Kingdisplay kd097d04 panel" 92 depends on OF 93 depends on DRM_MIPI_DSI 94 depends on BACKLIGHT_CLASS_DEVICE 95 help 96 Say Y here if you want to enable support for Kingdisplay kd097d04 97 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 98 24 bit RGB per pixel. It provides a MIPI DSI interface to 99 the host and has a built-in LED backlight. 100 101config DRM_PANEL_SAMSUNG_LD9040 102 tristate "Samsung LD9040 RGB/SPI panel" 103 depends on OF && SPI 104 select VIDEOMODE_HELPERS 105 106config DRM_PANEL_LG_LB035Q02 107 tristate "LG LB035Q024573 RGB panel" 108 depends on GPIOLIB && OF && SPI 109 help 110 Say Y here if you want to enable support for the LB035Q02 RGB panel 111 (found on the Gumstix Overo Palo35 board). To compile this driver as 112 a module, choose M here. 113 114config DRM_PANEL_LG_LG4573 115 tristate "LG4573 RGB/SPI panel" 116 depends on OF && SPI 117 select VIDEOMODE_HELPERS 118 help 119 Say Y here if you want to enable support for LG4573 RGB panel. 120 To compile this driver as a module, choose M here. 121 122config DRM_PANEL_NEC_NL8048HL11 123 tristate "NEC NL8048HL11 RGB panel" 124 depends on GPIOLIB && OF && SPI 125 help 126 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 127 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 128 as a module, choose M here. 129 130config DRM_PANEL_NOVATEK_NT39016 131 tristate "Novatek NT39016 RGB/SPI panel" 132 depends on OF && SPI 133 depends on BACKLIGHT_CLASS_DEVICE 134 select REGMAP_SPI 135 help 136 Say Y here if you want to enable support for the panels built 137 around the Novatek NT39016 display controller. 138 139config DRM_PANEL_OLIMEX_LCD_OLINUXINO 140 tristate "Olimex LCD-OLinuXino panel" 141 depends on OF 142 depends on I2C 143 depends on BACKLIGHT_CLASS_DEVICE 144 help 145 The panel is used with different sizes LCDs, from 480x272 to 146 1280x800, and 24 bit per pixel. 147 148 Say Y here if you want to enable support for Olimex Ltd. 149 LCD-OLinuXino panel. 150 151config DRM_PANEL_ORISETECH_OTM8009A 152 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 153 depends on OF 154 depends on DRM_MIPI_DSI 155 depends on BACKLIGHT_CLASS_DEVICE 156 help 157 Say Y here if you want to enable support for Orise Technology 158 otm8009a 480x800 dsi 2dl panel. 159 160config DRM_PANEL_OSD_OSD101T2587_53TS 161 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 162 depends on OF 163 depends on DRM_MIPI_DSI 164 depends on BACKLIGHT_CLASS_DEVICE 165 help 166 Say Y here if you want to enable support for One Stop Displays 167 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 168 169config DRM_PANEL_PANASONIC_VVX10F034N00 170 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 171 depends on OF 172 depends on DRM_MIPI_DSI 173 depends on BACKLIGHT_CLASS_DEVICE 174 help 175 Say Y here if you want to enable support for Panasonic VVX10F034N00 176 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 177 Xperia Z2 tablets 178 179config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 180 tristate "Raspberry Pi 7-inch touchscreen panel" 181 depends on DRM_MIPI_DSI 182 help 183 Say Y here if you want to enable support for the Raspberry 184 Pi 7" Touchscreen. To compile this driver as a module, 185 choose M here. 186 187config DRM_PANEL_RAYDIUM_RM67191 188 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 189 depends on OF 190 depends on DRM_MIPI_DSI 191 depends on BACKLIGHT_CLASS_DEVICE 192 help 193 Say Y here if you want to enable support for Raydium RM67191 FHD 194 (1080x1920) DSI panel. 195 196config DRM_PANEL_RAYDIUM_RM68200 197 tristate "Raydium RM68200 720x1280 DSI video mode panel" 198 depends on OF 199 depends on DRM_MIPI_DSI 200 depends on BACKLIGHT_CLASS_DEVICE 201 help 202 Say Y here if you want to enable support for Raydium RM68200 203 720x1280 DSI video mode panel. 204 205config DRM_PANEL_ROCKTECH_JH057N00900 206 tristate "Rocktech JH057N00900 MIPI touchscreen panel" 207 depends on OF 208 depends on DRM_MIPI_DSI 209 depends on BACKLIGHT_CLASS_DEVICE 210 help 211 Say Y here if you want to enable support for Rocktech JH057N00900 212 MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a 213 resolution of 720x1440 pixels, a built in backlight and touch 214 controller. 215 Touch input support is provided by the goodix driver and needs to be 216 selected separately. 217 218config DRM_PANEL_RONBO_RB070D30 219 tristate "Ronbo Electronics RB070D30 panel" 220 depends on OF 221 depends on DRM_MIPI_DSI 222 depends on BACKLIGHT_CLASS_DEVICE 223 help 224 Say Y here if you want to enable support for Ronbo Electronics 225 RB070D30 1024x600 DSI panel. 226 227config DRM_PANEL_SAMSUNG_S6D16D0 228 tristate "Samsung S6D16D0 DSI video mode panel" 229 depends on OF 230 depends on DRM_MIPI_DSI 231 select VIDEOMODE_HELPERS 232 233config DRM_PANEL_SAMSUNG_S6E3HA2 234 tristate "Samsung S6E3HA2 DSI video mode panel" 235 depends on OF 236 depends on DRM_MIPI_DSI 237 depends on BACKLIGHT_CLASS_DEVICE 238 select VIDEOMODE_HELPERS 239 240config DRM_PANEL_SAMSUNG_S6E63J0X03 241 tristate "Samsung S6E63J0X03 DSI command mode panel" 242 depends on OF 243 depends on DRM_MIPI_DSI 244 depends on BACKLIGHT_CLASS_DEVICE 245 select VIDEOMODE_HELPERS 246 247config DRM_PANEL_SAMSUNG_S6E63M0 248 tristate "Samsung S6E63M0 RGB/SPI panel" 249 depends on OF 250 depends on SPI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for Samsung S6E63M0 254 AMOLED LCD panel. 255 256config DRM_PANEL_SAMSUNG_S6E8AA0 257 tristate "Samsung S6E8AA0 DSI video mode panel" 258 depends on OF 259 select DRM_MIPI_DSI 260 select VIDEOMODE_HELPERS 261 262config DRM_PANEL_SEIKO_43WVF1G 263 tristate "Seiko 43WVF1G panel" 264 depends on OF 265 depends on BACKLIGHT_CLASS_DEVICE 266 select VIDEOMODE_HELPERS 267 help 268 Say Y here if you want to enable support for the Seiko 269 43WVF1G controller for 800x480 LCD panels 270 271config DRM_PANEL_SHARP_LQ101R1SX01 272 tristate "Sharp LQ101R1SX01 panel" 273 depends on OF 274 depends on DRM_MIPI_DSI 275 depends on BACKLIGHT_CLASS_DEVICE 276 help 277 Say Y here if you want to enable support for Sharp LQ101R1SX01 278 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 279 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 280 the host and has a built-in LED backlight. 281 282 To compile this driver as a module, choose M here: the module 283 will be called panel-sharp-lq101r1sx01. 284 285config DRM_PANEL_SHARP_LS037V7DW01 286 tristate "Sharp LS037V7DW01 VGA LCD panel" 287 depends on GPIOLIB && OF && REGULATOR 288 help 289 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 290 (480x640) LCD panel (found on the TI SDP3430 board). 291 292config DRM_PANEL_SHARP_LS043T1LE01 293 tristate "Sharp LS043T1LE01 qHD video mode panel" 294 depends on OF 295 depends on DRM_MIPI_DSI 296 depends on BACKLIGHT_CLASS_DEVICE 297 help 298 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 299 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 300 301config DRM_PANEL_SITRONIX_ST7701 302 tristate "Sitronix ST7701 panel driver" 303 depends on OF 304 depends on DRM_MIPI_DSI 305 depends on BACKLIGHT_CLASS_DEVICE 306 help 307 Say Y here if you want to enable support for the Sitronix 308 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 309 system interfaces. 310 311config DRM_PANEL_SITRONIX_ST7789V 312 tristate "Sitronix ST7789V panel" 313 depends on OF && SPI 314 depends on BACKLIGHT_CLASS_DEVICE 315 help 316 Say Y here if you want to enable support for the Sitronix 317 ST7789V controller for 240x320 LCD panels 318 319config DRM_PANEL_SONY_ACX565AKM 320 tristate "Sony ACX565AKM panel" 321 depends on GPIOLIB && OF && SPI 322 depends on BACKLIGHT_CLASS_DEVICE 323 help 324 Say Y here if you want to enable support for the Sony ACX565AKM 325 800x600 3.5" panel (found on the Nokia N900). 326 327config DRM_PANEL_TPO_TD028TTEC1 328 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 329 depends on OF && SPI 330 depends on BACKLIGHT_CLASS_DEVICE 331 help 332 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 333 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 334 335config DRM_PANEL_TPO_TD043MTEA1 336 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 337 depends on GPIOLIB && OF && REGULATOR && SPI 338 help 339 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 340 4.3" panel (found on the OMAP3 Pandora board). 341 342config DRM_PANEL_TPO_TPG110 343 tristate "TPO TPG 800x400 panel" 344 depends on OF && SPI && GPIOLIB 345 depends on BACKLIGHT_CLASS_DEVICE 346 help 347 Say Y here if you want to enable support for TPO TPG110 348 400CH LTPS TFT LCD Single Chip Digital Driver for up to 349 800x400 LCD panels. 350 351config DRM_PANEL_TRULY_NT35597_WQXGA 352 tristate "Truly WQXGA" 353 depends on OF 354 depends on DRM_MIPI_DSI 355 help 356 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 357 Video Mode panel 358endmenu 359