1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TH101MB31UIG002_28A 71 tristate "Boe TH101MB31UIG002-28A panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to enable support for Boe 77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280 78 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI 79 interface to the host and has a built-in LED backlight. 80 81config DRM_PANEL_BOE_TV101WUM_NL6 82 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 83 depends on OF 84 depends on DRM_MIPI_DSI 85 depends on BACKLIGHT_CLASS_DEVICE 86 help 87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 88 45NA WUXGA PANEL DSI Video Mode panel 89 90config DRM_PANEL_BOE_TV101WUM_LL2 91 tristate "BOE TV101WUM LL2 1200x1920 panel" 92 depends on OF 93 depends on DRM_MIPI_DSI 94 depends on BACKLIGHT_CLASS_DEVICE 95 help 96 Say Y here if you want to support for BOE TV101WUM-LL2 97 WUXGA PANEL DSI Video Mode panel 98 99config DRM_PANEL_EBBG_FT8719 100 tristate "EBBG FT8719 panel driver" 101 depends on OF 102 depends on DRM_MIPI_DSI 103 depends on BACKLIGHT_CLASS_DEVICE 104 help 105 Say Y here if you want to enable support for the EBBG FT8719 106 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 107 The panel has a resolution of 1080x2246. It provides a MIPI DSI 108 interface to the host. 109 110config DRM_PANEL_ELIDA_KD35T133 111 tristate "Elida KD35T133 panel driver" 112 depends on OF 113 depends on DRM_MIPI_DSI 114 depends on BACKLIGHT_CLASS_DEVICE 115 help 116 Say Y here if you want to enable support for the Elida 117 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 118 system interfaces. 119 120config DRM_PANEL_FEIXIN_K101_IM2BA02 121 tristate "Feixin K101 IM2BA02 panel" 122 depends on OF 123 depends on DRM_MIPI_DSI 124 depends on BACKLIGHT_CLASS_DEVICE 125 help 126 Say Y here if you want to enable support for the Feixin K101 IM2BA02 127 4-lane 800x1280 MIPI DSI panel. 128 129config DRM_PANEL_FEIYANG_FY07024DI26A30D 130 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 131 depends on OF 132 depends on DRM_MIPI_DSI 133 depends on BACKLIGHT_CLASS_DEVICE 134 help 135 Say Y if you want to enable support for panels based on the 136 Feiyang FY07024DI26A30-D MIPI-DSI interface. 137 138config DRM_PANEL_DSI_CM 139 tristate "Generic DSI command mode panels" 140 depends on OF 141 depends on DRM_MIPI_DSI 142 depends on BACKLIGHT_CLASS_DEVICE 143 help 144 DRM panel driver for DSI command mode panels with support for 145 embedded and external backlights. 146 147config DRM_PANEL_LVDS 148 tristate "Generic LVDS panel driver" 149 depends on OF 150 depends on BACKLIGHT_CLASS_DEVICE 151 select VIDEOMODE_HELPERS 152 help 153 This driver supports LVDS panels that don't require device-specific 154 handling of power supplies or control signals. It implements automatic 155 backlight handling if the panel is attached to a backlight controller. 156 157config DRM_PANEL_HIMAX_HX83102 158 tristate "Himax HX83102-based panels" 159 depends on OF 160 depends on DRM_MIPI_DSI 161 depends on BACKLIGHT_CLASS_DEVICE 162 help 163 Say Y if you want to enable support for panels based on the 164 Himax HX83102 controller. 165 166config DRM_PANEL_HIMAX_HX83112A 167 tristate "Himax HX83112A-based DSI panel" 168 depends on OF 169 depends on DRM_MIPI_DSI 170 depends on BACKLIGHT_CLASS_DEVICE 171 select DRM_KMS_HELPER 172 help 173 Say Y here if you want to enable support for Himax HX83112A-based 174 display panels, such as the one found in the Fairphone 4 smartphone. 175 176config DRM_PANEL_HIMAX_HX8394 177 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 178 depends on OF 179 depends on DRM_MIPI_DSI 180 depends on BACKLIGHT_CLASS_DEVICE 181 help 182 Say Y if you want to enable support for panels based on the 183 Himax HX8394 controller, such as the HannStar HSD060BHW4 184 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 185 186 If M is selected the module will be called panel-himax-hx8394. 187 188config DRM_PANEL_ILITEK_IL9322 189 tristate "Ilitek ILI9322 320x240 QVGA panels" 190 depends on OF && SPI 191 select REGMAP 192 help 193 Say Y here if you want to enable support for Ilitek IL9322 194 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 195 196config DRM_PANEL_ILITEK_ILI9341 197 tristate "Ilitek ILI9341 240x320 QVGA panels" 198 depends on SPI 199 select DRM_KMS_HELPER 200 select DRM_GEM_DMA_HELPER 201 depends on BACKLIGHT_CLASS_DEVICE 202 select DRM_MIPI_DBI 203 help 204 Say Y here if you want to enable support for Ilitek IL9341 205 QVGA (240x320) RGB panels. support serial & parallel rgb 206 interface. 207 208config DRM_PANEL_ILITEK_ILI9805 209 tristate "Ilitek ILI9805-based panels" 210 depends on OF 211 depends on DRM_MIPI_DSI 212 depends on BACKLIGHT_CLASS_DEVICE 213 help 214 Say Y if you want to enable support for panels based on the 215 Ilitek ILI9805 controller. 216 217config DRM_PANEL_ILITEK_ILI9806E 218 tristate "Ilitek ILI9806E-based panels" 219 depends on OF 220 depends on DRM_MIPI_DSI 221 depends on BACKLIGHT_CLASS_DEVICE 222 help 223 Say Y if you want to enable support for panels based on the 224 Ilitek ILI9806E controller. 225 226config DRM_PANEL_ILITEK_ILI9881C 227 tristate "Ilitek ILI9881C-based panels" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y if you want to enable support for panels based on the 233 Ilitek ILI9881c controller. 234 235config DRM_PANEL_ILITEK_ILI9882T 236 tristate "Ilitek ILI9882t-based panels" 237 depends on OF 238 depends on DRM_MIPI_DSI 239 depends on BACKLIGHT_CLASS_DEVICE 240 help 241 Say Y if you want to enable support for panels based on the 242 Ilitek ILI9882t controller. 243 244config DRM_PANEL_INNOLUX_EJ030NA 245 tristate "Innolux EJ030NA 320x480 LCD panel" 246 depends on OF && SPI 247 select REGMAP_SPI 248 help 249 Say Y here to enable support for the Innolux/Chimei EJ030NA 250 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 251 and LDK handheld gaming consoles. 252 253config DRM_PANEL_INNOLUX_P079ZCA 254 tristate "Innolux P079ZCA panel" 255 depends on OF 256 depends on DRM_MIPI_DSI 257 depends on BACKLIGHT_CLASS_DEVICE 258 help 259 Say Y here if you want to enable support for Innolux P079ZCA 260 TFT-LCD modules. The panel has a 1024x768 resolution and uses 261 24 bit RGB per pixel. It provides a MIPI DSI interface to 262 the host and has a built-in LED backlight. 263 264config DRM_PANEL_JADARD_JD9365DA_H3 265 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 266 depends on OF 267 depends on DRM_MIPI_DSI 268 depends on BACKLIGHT_CLASS_DEVICE 269 help 270 Say Y here if you want to enable support for Jadard JD9365DA-H3 271 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 272 800RGBx1280 dots at maximum. 273 274config DRM_PANEL_JDI_LPM102A188A 275 tristate "JDI LPM102A188A DSI panel" 276 depends on OF && GPIOLIB 277 depends on DRM_MIPI_DSI 278 depends on BACKLIGHT_CLASS_DEVICE 279 help 280 Say Y here if you want to enable support for JDI LPM102A188A DSI 281 command mode panel as found in Google Pixel C devices. 282 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface 283 to the host. 284 285config DRM_PANEL_JDI_LT070ME05000 286 tristate "JDI LT070ME05000 WUXGA DSI panel" 287 depends on OF 288 depends on DRM_MIPI_DSI 289 depends on BACKLIGHT_CLASS_DEVICE 290 help 291 Say Y here if you want to enable support for JDI DSI video mode 292 panel as found in Google Nexus 7 (2013) devices. 293 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 294 24 bit per pixel. 295 296config DRM_PANEL_JDI_R63452 297 tristate "JDI R63452 Full HD DSI panel" 298 depends on OF 299 depends on DRM_MIPI_DSI 300 depends on BACKLIGHT_CLASS_DEVICE 301 help 302 Say Y here if you want to enable support for the JDI R63452 303 DSI command mode panel as found in Xiaomi Mi 5 Devices. 304 305config DRM_PANEL_KHADAS_TS050 306 tristate "Khadas TS050 panel" 307 depends on OF 308 depends on DRM_MIPI_DSI 309 depends on BACKLIGHT_CLASS_DEVICE 310 help 311 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 312 panel module. The panel has a 1080x1920 resolution and uses 313 24 bit RGB per pixel. It provides a MIPI DSI interface to 314 the host, a built-in LED backlight and touch controller. 315 316config DRM_PANEL_KINGDISPLAY_KD097D04 317 tristate "Kingdisplay kd097d04 panel" 318 depends on OF 319 depends on DRM_MIPI_DSI 320 depends on BACKLIGHT_CLASS_DEVICE 321 help 322 Say Y here if you want to enable support for Kingdisplay kd097d04 323 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 324 24 bit RGB per pixel. It provides a MIPI DSI interface to 325 the host and has a built-in LED backlight. 326 327config DRM_PANEL_LEADTEK_LTK050H3146W 328 tristate "Leadtek LTK050H3146W panel" 329 depends on OF 330 depends on DRM_MIPI_DSI 331 depends on BACKLIGHT_CLASS_DEVICE 332 help 333 Say Y here if you want to enable support for Leadtek LTK050H3146W 334 TFT-LCD modules. The panel has a 720x1280 resolution and uses 335 24 bit RGB per pixel. It provides a MIPI DSI interface to 336 the host and has a built-in LED backlight. 337 338config DRM_PANEL_LEADTEK_LTK500HD1829 339 tristate "Leadtek LTK500HD1829 panel" 340 depends on OF 341 depends on DRM_MIPI_DSI 342 depends on BACKLIGHT_CLASS_DEVICE 343 help 344 Say Y here if you want to enable support for Kingdisplay kd097d04 345 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 346 24 bit RGB per pixel. It provides a MIPI DSI interface to 347 the host and has a built-in LED backlight. 348 349config DRM_PANEL_LINCOLNTECH_LCD197 350 tristate "Lincoln Technologies lcd197 panel" 351 depends on OF 352 depends on DRM_MIPI_DSI 353 depends on BACKLIGHT_CLASS_DEVICE 354 help 355 Say Y here if you want to enable support for lincolntech lcd197 356 TFT-LCD modules. The panel has a 1080x1920 resolution and uses 357 24 bit RGB per pixel. It provides a MIPI DSI interface to 358 the host. 359 360config DRM_PANEL_LG_LB035Q02 361 tristate "LG LB035Q024573 RGB panel" 362 depends on GPIOLIB && OF && SPI 363 help 364 Say Y here if you want to enable support for the LB035Q02 RGB panel 365 (found on the Gumstix Overo Palo35 board). To compile this driver as 366 a module, choose M here. 367 368config DRM_PANEL_LG_LG4573 369 tristate "LG4573 RGB/SPI panel" 370 depends on OF && SPI 371 select VIDEOMODE_HELPERS 372 help 373 Say Y here if you want to enable support for LG4573 RGB panel. 374 To compile this driver as a module, choose M here. 375 376config DRM_PANEL_LG_SW43408 377 tristate "LG SW43408 panel" 378 depends on OF 379 depends on DRM_MIPI_DSI 380 depends on BACKLIGHT_CLASS_DEVICE 381 select DRM_DISPLAY_DP_HELPER 382 select DRM_DISPLAY_HELPER 383 help 384 Say Y here if you want to enable support for LG sw43408 panel. 385 The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per 386 pixel. It provides a MIPI DSI interface to the host and has a 387 built-in LED backlight. 388 389config DRM_PANEL_MAGNACHIP_D53E6EA8966 390 tristate "Magnachip D53E6EA8966 DSI panel" 391 depends on OF && SPI 392 depends on DRM_MIPI_DSI 393 depends on BACKLIGHT_CLASS_DEVICE 394 select DRM_MIPI_DBI 395 help 396 DRM panel driver for the Samsung AMS495QA01 panel controlled 397 with the Magnachip D53E6EA8966 panel IC. This panel receives 398 video data via DSI but commands via 9-bit SPI using DBI. 399 400config DRM_PANEL_MANTIX_MLAF057WE51 401 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 402 depends on OF 403 depends on DRM_MIPI_DSI 404 depends on BACKLIGHT_CLASS_DEVICE 405 help 406 Say Y here if you want to enable support for the Mantix 407 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 408 has a resolution of 720x1440 pixels, a built in backlight and touch 409 controller. 410 411config DRM_PANEL_NEC_NL8048HL11 412 tristate "NEC NL8048HL11 RGB panel" 413 depends on GPIOLIB && OF && SPI 414 help 415 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 416 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 417 as a module, choose M here. 418 419config DRM_PANEL_NEWVISION_NV3051D 420 tristate "NewVision NV3051D DSI panel" 421 depends on OF 422 depends on DRM_MIPI_DSI 423 depends on BACKLIGHT_CLASS_DEVICE 424 help 425 This driver supports the NV3051D based panel found on the Anbernic 426 RG353P and RG353V. 427 428config DRM_PANEL_NEWVISION_NV3052C 429 tristate "NewVision NV3052C RGB/SPI panel" 430 depends on OF && SPI 431 depends on BACKLIGHT_CLASS_DEVICE 432 select DRM_MIPI_DBI 433 help 434 Say Y here if you want to enable support for the panels built 435 around the NewVision NV3052C display controller. 436 437config DRM_PANEL_NOVATEK_NT35510 438 tristate "Novatek NT35510 RGB panel driver" 439 depends on OF 440 depends on DRM_MIPI_DSI 441 depends on BACKLIGHT_CLASS_DEVICE 442 help 443 Say Y here if you want to enable support for the panels built 444 around the Novatek NT35510 display controller, such as some 445 Hydis panels. 446 447config DRM_PANEL_NOVATEK_NT35560 448 tristate "Novatek NT35560 DSI command mode panel" 449 depends on OF 450 depends on DRM_MIPI_DSI 451 depends on BACKLIGHT_CLASS_DEVICE 452 select VIDEOMODE_HELPERS 453 help 454 Say Y here if you want to enable the Novatek NT35560 display 455 controller. This panel supports DSI in both command and video 456 mode. This supports several panels such as Sony ACX424AKM and 457 ACX424AKP. 458 459config DRM_PANEL_NOVATEK_NT35950 460 tristate "Novatek NT35950 DSI panel" 461 depends on OF 462 depends on DRM_MIPI_DSI 463 depends on BACKLIGHT_CLASS_DEVICE 464 help 465 Say Y here if you want to enable support for the panels built 466 around the Novatek NT35950 display controller, such as some 467 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 468 mobile phones. 469 470config DRM_PANEL_NOVATEK_NT36523 471 tristate "Novatek NT36523 panel driver" 472 depends on OF 473 depends on DRM_MIPI_DSI 474 depends on BACKLIGHT_CLASS_DEVICE 475 help 476 Say Y here if you want to enable support for the panels built 477 around the Novatek NT36523 display controller, such as some 478 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. 479 480config DRM_PANEL_NOVATEK_NT36672A 481 tristate "Novatek NT36672A DSI panel" 482 depends on OF 483 depends on DRM_MIPI_DSI 484 depends on BACKLIGHT_CLASS_DEVICE 485 help 486 Say Y here if you want to enable support for the panels built 487 around the Novatek NT36672A display controller, such as some 488 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 489 490config DRM_PANEL_NOVATEK_NT36672E 491 tristate "Novatek NT36672E DSI panel" 492 depends on OF 493 depends on DRM_MIPI_DSI 494 depends on BACKLIGHT_CLASS_DEVICE 495 help 496 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode 497 LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit 498 RGB per pixel. 499 500config DRM_PANEL_NOVATEK_NT39016 501 tristate "Novatek NT39016 RGB/SPI panel" 502 depends on OF && SPI 503 depends on BACKLIGHT_CLASS_DEVICE 504 select REGMAP_SPI 505 help 506 Say Y here if you want to enable support for the panels built 507 around the Novatek NT39016 display controller. 508 509config DRM_PANEL_OLIMEX_LCD_OLINUXINO 510 tristate "Olimex LCD-OLinuXino panel" 511 depends on OF 512 depends on I2C 513 depends on BACKLIGHT_CLASS_DEVICE 514 select CRC32 515 help 516 The panel is used with different sizes LCDs, from 480x272 to 517 1280x800, and 24 bit per pixel. 518 519 Say Y here if you want to enable support for Olimex Ltd. 520 LCD-OLinuXino panel. 521 522config DRM_PANEL_ORISETECH_OTA5601A 523 tristate "Orise Technology ota5601a RGB/SPI panel" 524 depends on SPI 525 depends on BACKLIGHT_CLASS_DEVICE 526 select REGMAP_SPI 527 help 528 Say Y here if you want to enable support for the panels built 529 around the Orise Technology OTA9601A display controller. 530 531config DRM_PANEL_ORISETECH_OTM8009A 532 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 533 depends on OF 534 depends on DRM_MIPI_DSI 535 depends on BACKLIGHT_CLASS_DEVICE 536 help 537 Say Y here if you want to enable support for Orise Technology 538 otm8009a 480x800 dsi 2dl panel. 539 540config DRM_PANEL_OSD_OSD101T2587_53TS 541 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 542 depends on OF 543 depends on DRM_MIPI_DSI 544 depends on BACKLIGHT_CLASS_DEVICE 545 help 546 Say Y here if you want to enable support for One Stop Displays 547 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 548 549config DRM_PANEL_PANASONIC_VVX10F034N00 550 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 551 depends on OF 552 depends on DRM_MIPI_DSI 553 depends on BACKLIGHT_CLASS_DEVICE 554 help 555 Say Y here if you want to enable support for Panasonic VVX10F034N00 556 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 557 Xperia Z2 tablets 558 559config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 560 tristate "Raspberry Pi 7-inch touchscreen panel" 561 depends on DRM_MIPI_DSI 562 help 563 Say Y here if you want to enable support for the Raspberry 564 Pi 7" Touchscreen. To compile this driver as a module, 565 choose M here. 566 567config DRM_PANEL_RAYDIUM_RM67191 568 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 569 depends on OF 570 depends on DRM_MIPI_DSI 571 depends on BACKLIGHT_CLASS_DEVICE 572 help 573 Say Y here if you want to enable support for Raydium RM67191 FHD 574 (1080x1920) DSI panel. 575 576config DRM_PANEL_RAYDIUM_RM68200 577 tristate "Raydium RM68200 720x1280 DSI video mode panel" 578 depends on OF 579 depends on DRM_MIPI_DSI 580 depends on BACKLIGHT_CLASS_DEVICE 581 help 582 Say Y here if you want to enable support for Raydium RM68200 583 720x1280 DSI video mode panel. 584 585config DRM_PANEL_RAYDIUM_RM692E5 586 tristate "Raydium RM692E5-based DSI panel" 587 depends on OF 588 depends on DRM_MIPI_DSI 589 depends on BACKLIGHT_CLASS_DEVICE 590 select DRM_DISPLAY_DP_HELPER 591 select DRM_DISPLAY_HELPER 592 help 593 Say Y here if you want to enable support for Raydium RM692E5-based 594 display panels, such as the one found in the Fairphone 5 smartphone. 595 596config DRM_PANEL_RAYDIUM_RM69380 597 tristate "Raydium RM69380-based DSI panel" 598 depends on OF && GPIOLIB 599 depends on DRM_MIPI_DSI 600 depends on BACKLIGHT_CLASS_DEVICE 601 help 602 Say Y here if you want to enable support for Raydium RM69380-based 603 display panels. 604 605 This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021 606 in combination with an EDO OLED panel. 607 608config DRM_PANEL_RONBO_RB070D30 609 tristate "Ronbo Electronics RB070D30 panel" 610 depends on OF 611 depends on DRM_MIPI_DSI 612 depends on BACKLIGHT_CLASS_DEVICE 613 help 614 Say Y here if you want to enable support for Ronbo Electronics 615 RB070D30 1024x600 DSI panel. 616 617config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 618 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 619 depends on OF 620 select DRM_MIPI_DSI 621 select VIDEOMODE_HELPERS 622 623config DRM_PANEL_SAMSUNG_ATNA33XC20 624 tristate "Samsung ATNA33XC20 eDP panel" 625 depends on OF 626 depends on BACKLIGHT_CLASS_DEVICE 627 depends on PM 628 select DRM_DISPLAY_DP_HELPER 629 select DRM_DISPLAY_HELPER 630 select DRM_DISPLAY_DP_AUX_BUS 631 help 632 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 633 be handled by the DRM_PANEL_SIMPLE driver because its power 634 sequencing is non-standard. 635 636config DRM_PANEL_SAMSUNG_DB7430 637 tristate "Samsung DB7430-based DPI panels" 638 depends on OF && SPI && GPIOLIB 639 depends on BACKLIGHT_CLASS_DEVICE 640 select DRM_MIPI_DBI 641 help 642 Say Y here if you want to enable support for the Samsung 643 DB7430 DPI display controller used in such devices as the 644 LMS397KF04 480x800 DPI panel. 645 646config DRM_PANEL_SAMSUNG_LD9040 647 tristate "Samsung LD9040 RGB/SPI panel" 648 depends on OF && SPI 649 depends on BACKLIGHT_CLASS_DEVICE 650 select VIDEOMODE_HELPERS 651 652config DRM_PANEL_SAMSUNG_S6E3FA7 653 tristate "Samsung S6E3FA7 panel driver" 654 depends on OF 655 depends on DRM_MIPI_DSI 656 depends on BACKLIGHT_CLASS_DEVICE 657 help 658 Say Y here if you want to enable support for the Samsung S6E3FA7 659 1920x2220 panel. 660 661config DRM_PANEL_SAMSUNG_S6D16D0 662 tristate "Samsung S6D16D0 DSI video mode panel" 663 depends on OF 664 depends on DRM_MIPI_DSI 665 select VIDEOMODE_HELPERS 666 667config DRM_PANEL_SAMSUNG_S6D27A1 668 tristate "Samsung S6D27A1 DPI panel driver" 669 depends on OF && SPI && GPIOLIB 670 select DRM_MIPI_DBI 671 help 672 Say Y here if you want to enable support for the Samsung 673 S6D27A1 DPI 480x800 panel. 674 675 This panel can be found in Samsung Galaxy Ace 2 676 GT-I8160 mobile phone. 677 678config DRM_PANEL_SAMSUNG_S6D7AA0 679 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller" 680 depends on OF 681 depends on BACKLIGHT_CLASS_DEVICE 682 select DRM_MIPI_DSI 683 select VIDEOMODE_HELPERS 684 685config DRM_PANEL_SAMSUNG_S6E3HA2 686 tristate "Samsung S6E3HA2 DSI video mode panel" 687 depends on OF 688 depends on DRM_MIPI_DSI 689 depends on BACKLIGHT_CLASS_DEVICE 690 select VIDEOMODE_HELPERS 691 692config DRM_PANEL_SAMSUNG_S6E63J0X03 693 tristate "Samsung S6E63J0X03 DSI command mode panel" 694 depends on OF 695 depends on DRM_MIPI_DSI 696 depends on BACKLIGHT_CLASS_DEVICE 697 select VIDEOMODE_HELPERS 698 699config DRM_PANEL_SAMSUNG_S6E63M0 700 tristate "Samsung S6E63M0 RGB panel" 701 depends on OF 702 depends on BACKLIGHT_CLASS_DEVICE 703 help 704 Say Y here if you want to enable support for Samsung S6E63M0 705 AMOLED LCD panel. This panel can be accessed using SPI or 706 DSI. 707 708config DRM_PANEL_SAMSUNG_S6E63M0_SPI 709 tristate "Samsung S6E63M0 RGB SPI interface" 710 depends on SPI 711 depends on DRM_PANEL_SAMSUNG_S6E63M0 712 default DRM_PANEL_SAMSUNG_S6E63M0 713 select DRM_MIPI_DBI 714 help 715 Say Y here if you want to be able to access the Samsung 716 S6E63M0 panel using SPI. 717 718config DRM_PANEL_SAMSUNG_S6E63M0_DSI 719 tristate "Samsung S6E63M0 RGB DSI interface" 720 depends on DRM_MIPI_DSI 721 depends on DRM_PANEL_SAMSUNG_S6E63M0 722 help 723 Say Y here if you want to be able to access the Samsung 724 S6E63M0 panel using DSI. 725 726config DRM_PANEL_SAMSUNG_S6E8AA0 727 tristate "Samsung S6E8AA0 DSI video mode panel" 728 depends on OF 729 select DRM_MIPI_DSI 730 select VIDEOMODE_HELPERS 731 732config DRM_PANEL_SAMSUNG_SOFEF00 733 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 734 depends on OF 735 depends on DRM_MIPI_DSI 736 depends on BACKLIGHT_CLASS_DEVICE 737 select VIDEOMODE_HELPERS 738 help 739 Say Y or M here if you want to enable support for the Samsung AMOLED 740 command mode panels found in the OnePlus 6/6T smartphones. 741 742 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 743 744config DRM_PANEL_SEIKO_43WVF1G 745 tristate "Seiko 43WVF1G panel" 746 depends on OF 747 depends on BACKLIGHT_CLASS_DEVICE 748 select VIDEOMODE_HELPERS 749 help 750 Say Y here if you want to enable support for the Seiko 751 43WVF1G controller for 800x480 LCD panels 752 753config DRM_PANEL_SHARP_LQ101R1SX01 754 tristate "Sharp LQ101R1SX01 panel" 755 depends on OF 756 depends on DRM_MIPI_DSI 757 depends on BACKLIGHT_CLASS_DEVICE 758 help 759 Say Y here if you want to enable support for Sharp LQ101R1SX01 760 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 761 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 762 the host and has a built-in LED backlight. 763 764 To compile this driver as a module, choose M here: the module 765 will be called panel-sharp-lq101r1sx01. 766 767config DRM_PANEL_SHARP_LS037V7DW01 768 tristate "Sharp LS037V7DW01 VGA LCD panel" 769 depends on GPIOLIB && OF && REGULATOR 770 help 771 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 772 (480x640) LCD panel (found on the TI SDP3430 board). 773 774config DRM_PANEL_SHARP_LS043T1LE01 775 tristate "Sharp LS043T1LE01 qHD video mode panel" 776 depends on OF 777 depends on DRM_MIPI_DSI 778 depends on BACKLIGHT_CLASS_DEVICE 779 help 780 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 781 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 782 783config DRM_PANEL_SHARP_LS060T1SX01 784 tristate "Sharp LS060T1SX01 FullHD video mode panel" 785 depends on OF 786 depends on DRM_MIPI_DSI 787 depends on BACKLIGHT_CLASS_DEVICE 788 help 789 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 790 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 791 Bundle. 792 793config DRM_PANEL_SITRONIX_ST7701 794 tristate "Sitronix ST7701 panel driver" 795 depends on OF 796 depends on SPI || DRM_MIPI_DSI 797 select DRM_MIPI_DBI if SPI 798 depends on BACKLIGHT_CLASS_DEVICE 799 help 800 Say Y here if you want to enable support for the Sitronix 801 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 802 system interfaces. 803 804config DRM_PANEL_SITRONIX_ST7703 805 tristate "Sitronix ST7703 based MIPI touchscreen panels" 806 depends on OF 807 depends on DRM_MIPI_DSI 808 depends on BACKLIGHT_CLASS_DEVICE 809 help 810 Say Y here if you want to enable support for Sitronix ST7703 based 811 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 812 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 813 in backlight and touch controller. 814 Touch input support is provided by the goodix driver and needs to be 815 selected separately. 816 817config DRM_PANEL_SITRONIX_ST7789V 818 tristate "Sitronix ST7789V panel" 819 depends on OF && SPI 820 depends on BACKLIGHT_CLASS_DEVICE 821 help 822 Say Y here if you want to enable support for the Sitronix 823 ST7789V controller for 240x320 LCD panels 824 825config DRM_PANEL_SONY_ACX565AKM 826 tristate "Sony ACX565AKM panel" 827 depends on GPIOLIB && OF && SPI 828 depends on BACKLIGHT_CLASS_DEVICE 829 help 830 Say Y here if you want to enable support for the Sony ACX565AKM 831 800x600 3.5" panel (found on the Nokia N900). 832 833config DRM_PANEL_SONY_TD4353_JDI 834 tristate "Sony TD4353 JDI panel" 835 depends on GPIOLIB && OF 836 depends on DRM_MIPI_DSI 837 depends on BACKLIGHT_CLASS_DEVICE 838 help 839 Say Y here if you want to enable support for the Sony Tama 840 TD4353 JDI command mode panel as found on some Sony Xperia 841 XZ2 and XZ2 Compact smartphones. 842 843config DRM_PANEL_SONY_TULIP_TRULY_NT35521 844 tristate "Sony Tulip Truly NT35521 panel" 845 depends on GPIOLIB && OF 846 depends on DRM_MIPI_DSI 847 depends on BACKLIGHT_CLASS_DEVICE 848 help 849 Say Y here if you want to enable support for the Sony Tulip 850 NT35521 1280x720 video mode panel as found on Sony Xperia M4 851 Aqua phone. 852 853config DRM_PANEL_STARTEK_KD070FHFID015 854 tristate "STARTEK KD070FHFID015 panel" 855 depends on OF 856 depends on DRM_MIPI_DSI 857 depends on BACKLIGHT_CLASS_DEVICE 858 help 859 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel 860 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display 861 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to 862 the host, a built-in LED backlight and touch controller. 863 864config DRM_PANEL_EDP 865 tristate "support for simple Embedded DisplayPort panels" 866 depends on OF 867 depends on BACKLIGHT_CLASS_DEVICE 868 depends on PM 869 select VIDEOMODE_HELPERS 870 select DRM_DISPLAY_DP_HELPER 871 select DRM_DISPLAY_HELPER 872 select DRM_DISPLAY_DP_AUX_BUS 873 select DRM_KMS_HELPER 874 help 875 DRM panel driver for dumb eDP panels that need at most a regulator and 876 a GPIO to be powered up. Optionally a backlight can be attached so 877 that it can be automatically turned off when the panel goes into a 878 low power state. 879 880config DRM_PANEL_SIMPLE 881 tristate "support for simple panels (other than eDP ones)" 882 depends on OF 883 depends on BACKLIGHT_CLASS_DEVICE 884 depends on PM 885 select VIDEOMODE_HELPERS 886 help 887 DRM panel driver for dumb non-eDP panels that need at most a regulator 888 and a GPIO to be powered up. Optionally a backlight can be attached so 889 that it can be automatically turned off when the panel goes into a 890 low power state. 891 892config DRM_PANEL_SYNAPTICS_R63353 893 tristate "Synaptics R63353-based panels" 894 depends on OF 895 depends on DRM_MIPI_DSI 896 depends on BACKLIGHT_CLASS_DEVICE 897 help 898 Say Y if you want to enable support for panels based on the 899 Synaptics R63353 controller. 900 901config DRM_PANEL_TDO_TL070WSH30 902 tristate "TDO TL070WSH30 DSI panel" 903 depends on OF 904 depends on DRM_MIPI_DSI 905 depends on BACKLIGHT_CLASS_DEVICE 906 help 907 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 908 panel module. The panel has a 1024×600 resolution and uses 909 24 bit RGB per pixel. It provides a MIPI DSI interface to 910 the host, a built-in LED backlight and touch controller. 911 912config DRM_PANEL_TPO_TD028TTEC1 913 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 914 depends on OF && SPI 915 depends on BACKLIGHT_CLASS_DEVICE 916 help 917 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 918 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 919 920config DRM_PANEL_TPO_TD043MTEA1 921 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 922 depends on GPIOLIB && OF && REGULATOR && SPI 923 help 924 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 925 4.3" panel (found on the OMAP3 Pandora board). 926 927config DRM_PANEL_TPO_TPG110 928 tristate "TPO TPG 800x400 panel" 929 depends on OF && SPI && GPIOLIB 930 depends on BACKLIGHT_CLASS_DEVICE 931 help 932 Say Y here if you want to enable support for TPO TPG110 933 400CH LTPS TFT LCD Single Chip Digital Driver for up to 934 800x400 LCD panels. 935 936config DRM_PANEL_TRULY_NT35597_WQXGA 937 tristate "Truly WQXGA" 938 depends on OF 939 depends on DRM_MIPI_DSI 940 help 941 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 942 Video Mode panel 943 944config DRM_PANEL_VISIONOX_R66451 945 tristate "Visionox R66451" 946 depends on OF 947 depends on DRM_MIPI_DSI 948 depends on BACKLIGHT_CLASS_DEVICE 949 select DRM_DISPLAY_DP_HELPER 950 select DRM_DISPLAY_HELPER 951 help 952 Say Y here if you want to enable support for Visionox 953 R66451 1080x2340 AMOLED DSI panel. 954 955config DRM_PANEL_VISIONOX_RM69299 956 tristate "Visionox RM69299" 957 depends on OF 958 depends on DRM_MIPI_DSI 959 help 960 Say Y here if you want to enable support for Visionox 961 RM69299 DSI Video Mode panel. 962 963config DRM_PANEL_VISIONOX_VTDR6130 964 tristate "Visionox VTDR6130" 965 depends on OF 966 depends on DRM_MIPI_DSI 967 depends on BACKLIGHT_CLASS_DEVICE 968 help 969 Say Y here if you want to enable support for Visionox 970 VTDR6130 1080x2400 AMOLED DSI panel. 971 972config DRM_PANEL_WIDECHIPS_WS2401 973 tristate "Widechips WS2401 DPI panel driver" 974 depends on SPI && GPIOLIB 975 depends on BACKLIGHT_CLASS_DEVICE 976 select DRM_MIPI_DBI 977 help 978 Say Y here if you want to enable support for the Widechips WS2401 DPI 979 480x800 display controller used in panels such as Samsung LMS380KF01. 980 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 981 982config DRM_PANEL_XINPENG_XPP055C272 983 tristate "Xinpeng XPP055C272 panel driver" 984 depends on OF 985 depends on DRM_MIPI_DSI 986 depends on BACKLIGHT_CLASS_DEVICE 987 help 988 Say Y here if you want to enable support for the Xinpeng 989 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 990 system interfaces. 991endmenu 992