1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TV101WUM_NL6 71 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 77 45NA WUXGA PANEL DSI Video Mode panel 78 79config DRM_PANEL_DSI_CM 80 tristate "Generic DSI command mode panels" 81 depends on OF 82 depends on DRM_MIPI_DSI 83 depends on BACKLIGHT_CLASS_DEVICE 84 help 85 DRM panel driver for DSI command mode panels with support for 86 embedded and external backlights. 87 88config DRM_PANEL_LVDS 89 tristate "Generic LVDS panel driver" 90 depends on OF 91 depends on BACKLIGHT_CLASS_DEVICE 92 select VIDEOMODE_HELPERS 93 help 94 This driver supports LVDS panels that don't require device-specific 95 handling of power supplies or control signals. It implements automatic 96 backlight handling if the panel is attached to a backlight controller. 97 98config DRM_PANEL_SIMPLE 99 tristate "support for simple panels (other than eDP ones)" 100 depends on OF 101 depends on BACKLIGHT_CLASS_DEVICE 102 depends on PM 103 select VIDEOMODE_HELPERS 104 help 105 DRM panel driver for dumb non-eDP panels that need at most a regulator 106 and a GPIO to be powered up. Optionally a backlight can be attached so 107 that it can be automatically turned off when the panel goes into a 108 low power state. 109 110config DRM_PANEL_EDP 111 tristate "support for simple Embedded DisplayPort panels" 112 depends on OF 113 depends on BACKLIGHT_CLASS_DEVICE 114 depends on PM 115 select VIDEOMODE_HELPERS 116 select DRM_DISPLAY_DP_HELPER 117 select DRM_DISPLAY_HELPER 118 select DRM_DP_AUX_BUS 119 select DRM_KMS_HELPER 120 help 121 DRM panel driver for dumb eDP panels that need at most a regulator and 122 a GPIO to be powered up. Optionally a backlight can be attached so 123 that it can be automatically turned off when the panel goes into a 124 low power state. 125 126config DRM_PANEL_EBBG_FT8719 127 tristate "EBBG FT8719 panel driver" 128 depends on OF 129 depends on DRM_MIPI_DSI 130 depends on BACKLIGHT_CLASS_DEVICE 131 help 132 Say Y here if you want to enable support for the EBBG FT8719 133 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 134 The panel has a resolution of 1080x2246. It provides a MIPI DSI 135 interface to the host. 136 137config DRM_PANEL_ELIDA_KD35T133 138 tristate "Elida KD35T133 panel driver" 139 depends on OF 140 depends on DRM_MIPI_DSI 141 depends on BACKLIGHT_CLASS_DEVICE 142 help 143 Say Y here if you want to enable support for the Elida 144 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 145 system interfaces. 146 147config DRM_PANEL_FEIXIN_K101_IM2BA02 148 tristate "Feixin K101 IM2BA02 panel" 149 depends on OF 150 depends on DRM_MIPI_DSI 151 depends on BACKLIGHT_CLASS_DEVICE 152 help 153 Say Y here if you want to enable support for the Feixin K101 IM2BA02 154 4-lane 800x1280 MIPI DSI panel. 155 156config DRM_PANEL_FEIYANG_FY07024DI26A30D 157 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 158 depends on OF 159 depends on DRM_MIPI_DSI 160 depends on BACKLIGHT_CLASS_DEVICE 161 help 162 Say Y if you want to enable support for panels based on the 163 Feiyang FY07024DI26A30-D MIPI-DSI interface. 164 165config DRM_PANEL_HIMAX_HX8394 166 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 167 depends on OF 168 depends on DRM_MIPI_DSI 169 depends on BACKLIGHT_CLASS_DEVICE 170 help 171 Say Y if you want to enable support for panels based on the 172 Himax HX8394 controller, such as the HannStar HSD060BHW4 173 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 174 175 If M is selected the module will be called panel-himax-hx8394. 176 177config DRM_PANEL_ILITEK_IL9322 178 tristate "Ilitek ILI9322 320x240 QVGA panels" 179 depends on OF && SPI 180 select REGMAP 181 help 182 Say Y here if you want to enable support for Ilitek IL9322 183 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 184 185config DRM_PANEL_ILITEK_ILI9341 186 tristate "Ilitek ILI9341 240x320 QVGA panels" 187 depends on OF && SPI 188 select DRM_KMS_HELPER 189 select DRM_GEM_DMA_HELPER 190 depends on BACKLIGHT_CLASS_DEVICE 191 select DRM_MIPI_DBI 192 help 193 Say Y here if you want to enable support for Ilitek IL9341 194 QVGA (240x320) RGB panels. support serial & parallel rgb 195 interface. 196 197config DRM_PANEL_ILITEK_ILI9881C 198 tristate "Ilitek ILI9881C-based panels" 199 depends on OF 200 depends on DRM_MIPI_DSI 201 depends on BACKLIGHT_CLASS_DEVICE 202 help 203 Say Y if you want to enable support for panels based on the 204 Ilitek ILI9881c controller. 205 206config DRM_PANEL_ILITEK_ILI9882T 207 tristate "Ilitek ILI9882t-based panels" 208 depends on OF 209 depends on DRM_MIPI_DSI 210 depends on BACKLIGHT_CLASS_DEVICE 211 help 212 Say Y if you want to enable support for panels based on the 213 Ilitek ILI9882t controller. 214 215config DRM_PANEL_INNOLUX_EJ030NA 216 tristate "Innolux EJ030NA 320x480 LCD panel" 217 depends on OF && SPI 218 select REGMAP_SPI 219 help 220 Say Y here to enable support for the Innolux/Chimei EJ030NA 221 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 222 and LDK handheld gaming consoles. 223 224config DRM_PANEL_INNOLUX_P079ZCA 225 tristate "Innolux P079ZCA panel" 226 depends on OF 227 depends on DRM_MIPI_DSI 228 depends on BACKLIGHT_CLASS_DEVICE 229 help 230 Say Y here if you want to enable support for Innolux P079ZCA 231 TFT-LCD modules. The panel has a 1024x768 resolution and uses 232 24 bit RGB per pixel. It provides a MIPI DSI interface to 233 the host and has a built-in LED backlight. 234 235config DRM_PANEL_JADARD_JD9365DA_H3 236 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 237 depends on OF 238 depends on DRM_MIPI_DSI 239 depends on BACKLIGHT_CLASS_DEVICE 240 help 241 Say Y here if you want to enable support for Jadard JD9365DA-H3 242 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 243 800RGBx1280 dots at maximum. 244 245config DRM_PANEL_JDI_LT070ME05000 246 tristate "JDI LT070ME05000 WUXGA DSI panel" 247 depends on OF 248 depends on DRM_MIPI_DSI 249 depends on BACKLIGHT_CLASS_DEVICE 250 help 251 Say Y here if you want to enable support for JDI DSI video mode 252 panel as found in Google Nexus 7 (2013) devices. 253 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 254 24 bit per pixel. 255 256config DRM_PANEL_JDI_LPM102A188A 257 tristate "JDI LPM102A188A DSI panel" 258 depends on OF && GPIOLIB 259 depends on DRM_MIPI_DSI 260 depends on BACKLIGHT_CLASS_DEVICE 261 help 262 Say Y here if you want to enable support for JDI LPM102A188A DSI 263 command mode panel as found in Google Pixel C devices. 264 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface 265 to the host. 266 267config DRM_PANEL_JDI_R63452 268 tristate "JDI R63452 Full HD DSI panel" 269 depends on OF 270 depends on DRM_MIPI_DSI 271 depends on BACKLIGHT_CLASS_DEVICE 272 help 273 Say Y here if you want to enable support for the JDI R63452 274 DSI command mode panel as found in Xiaomi Mi 5 Devices. 275 276config DRM_PANEL_KHADAS_TS050 277 tristate "Khadas TS050 panel" 278 depends on OF 279 depends on DRM_MIPI_DSI 280 depends on BACKLIGHT_CLASS_DEVICE 281 help 282 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 283 panel module. The panel has a 1080x1920 resolution and uses 284 24 bit RGB per pixel. It provides a MIPI DSI interface to 285 the host, a built-in LED backlight and touch controller. 286 287config DRM_PANEL_KINGDISPLAY_KD097D04 288 tristate "Kingdisplay kd097d04 panel" 289 depends on OF 290 depends on DRM_MIPI_DSI 291 depends on BACKLIGHT_CLASS_DEVICE 292 help 293 Say Y here if you want to enable support for Kingdisplay kd097d04 294 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 295 24 bit RGB per pixel. It provides a MIPI DSI interface to 296 the host and has a built-in LED backlight. 297 298config DRM_PANEL_LEADTEK_LTK050H3146W 299 tristate "Leadtek LTK050H3146W panel" 300 depends on OF 301 depends on DRM_MIPI_DSI 302 depends on BACKLIGHT_CLASS_DEVICE 303 help 304 Say Y here if you want to enable support for Leadtek LTK050H3146W 305 TFT-LCD modules. The panel has a 720x1280 resolution and uses 306 24 bit RGB per pixel. It provides a MIPI DSI interface to 307 the host and has a built-in LED backlight. 308 309config DRM_PANEL_LEADTEK_LTK500HD1829 310 tristate "Leadtek LTK500HD1829 panel" 311 depends on OF 312 depends on DRM_MIPI_DSI 313 depends on BACKLIGHT_CLASS_DEVICE 314 help 315 Say Y here if you want to enable support for Kingdisplay kd097d04 316 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 317 24 bit RGB per pixel. It provides a MIPI DSI interface to 318 the host and has a built-in LED backlight. 319 320config DRM_PANEL_SAMSUNG_LD9040 321 tristate "Samsung LD9040 RGB/SPI panel" 322 depends on OF && SPI 323 depends on BACKLIGHT_CLASS_DEVICE 324 select VIDEOMODE_HELPERS 325 326config DRM_PANEL_LG_LB035Q02 327 tristate "LG LB035Q024573 RGB panel" 328 depends on GPIOLIB && OF && SPI 329 help 330 Say Y here if you want to enable support for the LB035Q02 RGB panel 331 (found on the Gumstix Overo Palo35 board). To compile this driver as 332 a module, choose M here. 333 334config DRM_PANEL_LG_LG4573 335 tristate "LG4573 RGB/SPI panel" 336 depends on OF && SPI 337 select VIDEOMODE_HELPERS 338 help 339 Say Y here if you want to enable support for LG4573 RGB panel. 340 To compile this driver as a module, choose M here. 341 342config DRM_PANEL_MAGNACHIP_D53E6EA8966 343 tristate "Magnachip D53E6EA8966 DSI panel" 344 depends on OF && SPI 345 depends on DRM_MIPI_DSI 346 depends on BACKLIGHT_CLASS_DEVICE 347 select DRM_MIPI_DBI 348 help 349 DRM panel driver for the Samsung AMS495QA01 panel controlled 350 with the Magnachip D53E6EA8966 panel IC. This panel receives 351 video data via DSI but commands via 9-bit SPI using DBI. 352 353config DRM_PANEL_NEC_NL8048HL11 354 tristate "NEC NL8048HL11 RGB panel" 355 depends on GPIOLIB && OF && SPI 356 help 357 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 358 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 359 as a module, choose M here. 360 361config DRM_PANEL_NEWVISION_NV3051D 362 tristate "NewVision NV3051D DSI panel" 363 depends on OF 364 depends on DRM_MIPI_DSI 365 depends on BACKLIGHT_CLASS_DEVICE 366 help 367 This driver supports the NV3051D based panel found on the Anbernic 368 RG353P and RG353V. 369 370config DRM_PANEL_NEWVISION_NV3052C 371 tristate "NewVision NV3052C RGB/SPI panel" 372 depends on OF && SPI 373 depends on BACKLIGHT_CLASS_DEVICE 374 select DRM_MIPI_DBI 375 help 376 Say Y here if you want to enable support for the panels built 377 around the NewVision NV3052C display controller. 378 379config DRM_PANEL_NOVATEK_NT35510 380 tristate "Novatek NT35510 RGB panel driver" 381 depends on OF 382 depends on DRM_MIPI_DSI 383 depends on BACKLIGHT_CLASS_DEVICE 384 help 385 Say Y here if you want to enable support for the panels built 386 around the Novatek NT35510 display controller, such as some 387 Hydis panels. 388 389config DRM_PANEL_NOVATEK_NT35560 390 tristate "Novatek NT35560 DSI command mode panel" 391 depends on OF 392 depends on DRM_MIPI_DSI 393 depends on BACKLIGHT_CLASS_DEVICE 394 select VIDEOMODE_HELPERS 395 help 396 Say Y here if you want to enable the Novatek NT35560 display 397 controller. This panel supports DSI in both command and video 398 mode. This supports several panels such as Sony ACX424AKM and 399 ACX424AKP. 400 401config DRM_PANEL_NOVATEK_NT35950 402 tristate "Novatek NT35950 DSI panel" 403 depends on OF 404 depends on DRM_MIPI_DSI 405 depends on BACKLIGHT_CLASS_DEVICE 406 help 407 Say Y here if you want to enable support for the panels built 408 around the Novatek NT35950 display controller, such as some 409 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 410 mobile phones. 411 412config DRM_PANEL_NOVATEK_NT36523 413 tristate "Novatek NT36523 panel driver" 414 depends on OF 415 depends on DRM_MIPI_DSI 416 depends on BACKLIGHT_CLASS_DEVICE 417 help 418 Say Y here if you want to enable support for the panels built 419 around the Novatek NT36523 display controller, such as some 420 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. 421 422config DRM_PANEL_NOVATEK_NT36672A 423 tristate "Novatek NT36672A DSI panel" 424 depends on OF 425 depends on DRM_MIPI_DSI 426 depends on BACKLIGHT_CLASS_DEVICE 427 help 428 Say Y here if you want to enable support for the panels built 429 around the Novatek NT36672A display controller, such as some 430 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 431 432config DRM_PANEL_NOVATEK_NT39016 433 tristate "Novatek NT39016 RGB/SPI panel" 434 depends on OF && SPI 435 depends on BACKLIGHT_CLASS_DEVICE 436 select REGMAP_SPI 437 help 438 Say Y here if you want to enable support for the panels built 439 around the Novatek NT39016 display controller. 440 441config DRM_PANEL_MANTIX_MLAF057WE51 442 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 443 depends on OF 444 depends on DRM_MIPI_DSI 445 depends on BACKLIGHT_CLASS_DEVICE 446 help 447 Say Y here if you want to enable support for the Mantix 448 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 449 has a resolution of 720x1440 pixels, a built in backlight and touch 450 controller. 451 452config DRM_PANEL_OLIMEX_LCD_OLINUXINO 453 tristate "Olimex LCD-OLinuXino panel" 454 depends on OF 455 depends on I2C 456 depends on BACKLIGHT_CLASS_DEVICE 457 select CRC32 458 help 459 The panel is used with different sizes LCDs, from 480x272 to 460 1280x800, and 24 bit per pixel. 461 462 Say Y here if you want to enable support for Olimex Ltd. 463 LCD-OLinuXino panel. 464 465config DRM_PANEL_ORISETECH_OTA5601A 466 tristate "Orise Technology ota5601a RGB/SPI panel" 467 depends on SPI 468 depends on BACKLIGHT_CLASS_DEVICE 469 select REGMAP_SPI 470 help 471 Say Y here if you want to enable support for the panels built 472 around the Orise Technology OTA9601A display controller. 473 474config DRM_PANEL_ORISETECH_OTM8009A 475 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 476 depends on OF 477 depends on DRM_MIPI_DSI 478 depends on BACKLIGHT_CLASS_DEVICE 479 help 480 Say Y here if you want to enable support for Orise Technology 481 otm8009a 480x800 dsi 2dl panel. 482 483config DRM_PANEL_OSD_OSD101T2587_53TS 484 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 485 depends on OF 486 depends on DRM_MIPI_DSI 487 depends on BACKLIGHT_CLASS_DEVICE 488 help 489 Say Y here if you want to enable support for One Stop Displays 490 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 491 492config DRM_PANEL_PANASONIC_VVX10F034N00 493 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 494 depends on OF 495 depends on DRM_MIPI_DSI 496 depends on BACKLIGHT_CLASS_DEVICE 497 help 498 Say Y here if you want to enable support for Panasonic VVX10F034N00 499 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 500 Xperia Z2 tablets 501 502config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 503 tristate "Raspberry Pi 7-inch touchscreen panel" 504 depends on DRM_MIPI_DSI 505 help 506 Say Y here if you want to enable support for the Raspberry 507 Pi 7" Touchscreen. To compile this driver as a module, 508 choose M here. 509 510config DRM_PANEL_RAYDIUM_RM67191 511 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 512 depends on OF 513 depends on DRM_MIPI_DSI 514 depends on BACKLIGHT_CLASS_DEVICE 515 help 516 Say Y here if you want to enable support for Raydium RM67191 FHD 517 (1080x1920) DSI panel. 518 519config DRM_PANEL_RAYDIUM_RM68200 520 tristate "Raydium RM68200 720x1280 DSI video mode panel" 521 depends on OF 522 depends on DRM_MIPI_DSI 523 depends on BACKLIGHT_CLASS_DEVICE 524 help 525 Say Y here if you want to enable support for Raydium RM68200 526 720x1280 DSI video mode panel. 527 528config DRM_PANEL_RAYDIUM_RM692E5 529 tristate "Raydium RM692E5-based DSI panel" 530 depends on OF 531 depends on DRM_MIPI_DSI 532 depends on BACKLIGHT_CLASS_DEVICE 533 help 534 Say Y here if you want to enable support for Raydium RM692E5-based 535 display panels, such as the one found in the Fairphone 5 smartphone. 536 537config DRM_PANEL_RONBO_RB070D30 538 tristate "Ronbo Electronics RB070D30 panel" 539 depends on OF 540 depends on DRM_MIPI_DSI 541 depends on BACKLIGHT_CLASS_DEVICE 542 help 543 Say Y here if you want to enable support for Ronbo Electronics 544 RB070D30 1024x600 DSI panel. 545 546config DRM_PANEL_SAMSUNG_ATNA33XC20 547 tristate "Samsung ATNA33XC20 eDP panel" 548 depends on OF 549 depends on BACKLIGHT_CLASS_DEVICE 550 depends on PM 551 select DRM_DISPLAY_DP_HELPER 552 select DRM_DISPLAY_HELPER 553 select DRM_DP_AUX_BUS 554 help 555 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 556 be handled by the DRM_PANEL_SIMPLE driver because its power 557 sequencing is non-standard. 558 559config DRM_PANEL_SAMSUNG_DB7430 560 tristate "Samsung DB7430-based DPI panels" 561 depends on OF && SPI && GPIOLIB 562 depends on BACKLIGHT_CLASS_DEVICE 563 select DRM_MIPI_DBI 564 help 565 Say Y here if you want to enable support for the Samsung 566 DB7430 DPI display controller used in such devices as the 567 LMS397KF04 480x800 DPI panel. 568 569config DRM_PANEL_SAMSUNG_S6D16D0 570 tristate "Samsung S6D16D0 DSI video mode panel" 571 depends on OF 572 depends on DRM_MIPI_DSI 573 select VIDEOMODE_HELPERS 574 575config DRM_PANEL_SAMSUNG_S6D27A1 576 tristate "Samsung S6D27A1 DPI panel driver" 577 depends on OF && SPI && GPIOLIB 578 select DRM_MIPI_DBI 579 help 580 Say Y here if you want to enable support for the Samsung 581 S6D27A1 DPI 480x800 panel. 582 583 This panel can be found in Samsung Galaxy Ace 2 584 GT-I8160 mobile phone. 585 586config DRM_PANEL_SAMSUNG_S6D7AA0 587 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller" 588 depends on OF 589 depends on BACKLIGHT_CLASS_DEVICE 590 select DRM_MIPI_DSI 591 select VIDEOMODE_HELPERS 592 593config DRM_PANEL_SAMSUNG_S6E3HA2 594 tristate "Samsung S6E3HA2 DSI video mode panel" 595 depends on OF 596 depends on DRM_MIPI_DSI 597 depends on BACKLIGHT_CLASS_DEVICE 598 select VIDEOMODE_HELPERS 599 600config DRM_PANEL_SAMSUNG_S6E63J0X03 601 tristate "Samsung S6E63J0X03 DSI command mode panel" 602 depends on OF 603 depends on DRM_MIPI_DSI 604 depends on BACKLIGHT_CLASS_DEVICE 605 select VIDEOMODE_HELPERS 606 607config DRM_PANEL_SAMSUNG_S6E63M0 608 tristate "Samsung S6E63M0 RGB panel" 609 depends on OF 610 depends on BACKLIGHT_CLASS_DEVICE 611 help 612 Say Y here if you want to enable support for Samsung S6E63M0 613 AMOLED LCD panel. This panel can be accessed using SPI or 614 DSI. 615 616config DRM_PANEL_SAMSUNG_S6E63M0_SPI 617 tristate "Samsung S6E63M0 RGB SPI interface" 618 depends on SPI 619 depends on DRM_PANEL_SAMSUNG_S6E63M0 620 default DRM_PANEL_SAMSUNG_S6E63M0 621 select DRM_MIPI_DBI 622 help 623 Say Y here if you want to be able to access the Samsung 624 S6E63M0 panel using SPI. 625 626config DRM_PANEL_SAMSUNG_S6E63M0_DSI 627 tristate "Samsung S6E63M0 RGB DSI interface" 628 depends on DRM_MIPI_DSI 629 depends on DRM_PANEL_SAMSUNG_S6E63M0 630 help 631 Say Y here if you want to be able to access the Samsung 632 S6E63M0 panel using DSI. 633 634config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 635 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 636 depends on OF 637 select DRM_MIPI_DSI 638 select VIDEOMODE_HELPERS 639 640config DRM_PANEL_SAMSUNG_S6E8AA0 641 tristate "Samsung S6E8AA0 DSI video mode panel" 642 depends on OF 643 select DRM_MIPI_DSI 644 select VIDEOMODE_HELPERS 645 646config DRM_PANEL_SAMSUNG_SOFEF00 647 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 648 depends on OF 649 depends on DRM_MIPI_DSI 650 depends on BACKLIGHT_CLASS_DEVICE 651 select VIDEOMODE_HELPERS 652 help 653 Say Y or M here if you want to enable support for the Samsung AMOLED 654 command mode panels found in the OnePlus 6/6T smartphones. 655 656 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 657 658config DRM_PANEL_SEIKO_43WVF1G 659 tristate "Seiko 43WVF1G panel" 660 depends on OF 661 depends on BACKLIGHT_CLASS_DEVICE 662 select VIDEOMODE_HELPERS 663 help 664 Say Y here if you want to enable support for the Seiko 665 43WVF1G controller for 800x480 LCD panels 666 667config DRM_PANEL_SHARP_LQ101R1SX01 668 tristate "Sharp LQ101R1SX01 panel" 669 depends on OF 670 depends on DRM_MIPI_DSI 671 depends on BACKLIGHT_CLASS_DEVICE 672 help 673 Say Y here if you want to enable support for Sharp LQ101R1SX01 674 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 675 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 676 the host and has a built-in LED backlight. 677 678 To compile this driver as a module, choose M here: the module 679 will be called panel-sharp-lq101r1sx01. 680 681config DRM_PANEL_SHARP_LS037V7DW01 682 tristate "Sharp LS037V7DW01 VGA LCD panel" 683 depends on GPIOLIB && OF && REGULATOR 684 help 685 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 686 (480x640) LCD panel (found on the TI SDP3430 board). 687 688config DRM_PANEL_SHARP_LS043T1LE01 689 tristate "Sharp LS043T1LE01 qHD video mode panel" 690 depends on OF 691 depends on DRM_MIPI_DSI 692 depends on BACKLIGHT_CLASS_DEVICE 693 help 694 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 695 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 696 697config DRM_PANEL_SHARP_LS060T1SX01 698 tristate "Sharp LS060T1SX01 FullHD video mode panel" 699 depends on OF 700 depends on DRM_MIPI_DSI 701 depends on BACKLIGHT_CLASS_DEVICE 702 help 703 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 704 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 705 Bundle. 706 707config DRM_PANEL_SITRONIX_ST7701 708 tristate "Sitronix ST7701 panel driver" 709 depends on OF 710 depends on DRM_MIPI_DSI 711 depends on BACKLIGHT_CLASS_DEVICE 712 help 713 Say Y here if you want to enable support for the Sitronix 714 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 715 system interfaces. 716 717config DRM_PANEL_SITRONIX_ST7703 718 tristate "Sitronix ST7703 based MIPI touchscreen panels" 719 depends on OF 720 depends on DRM_MIPI_DSI 721 depends on BACKLIGHT_CLASS_DEVICE 722 help 723 Say Y here if you want to enable support for Sitronix ST7703 based 724 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 725 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 726 in backlight and touch controller. 727 Touch input support is provided by the goodix driver and needs to be 728 selected separately. 729 730config DRM_PANEL_SITRONIX_ST7789V 731 tristate "Sitronix ST7789V panel" 732 depends on OF && SPI 733 depends on BACKLIGHT_CLASS_DEVICE 734 help 735 Say Y here if you want to enable support for the Sitronix 736 ST7789V controller for 240x320 LCD panels 737 738config DRM_PANEL_SONY_ACX565AKM 739 tristate "Sony ACX565AKM panel" 740 depends on GPIOLIB && OF && SPI 741 depends on BACKLIGHT_CLASS_DEVICE 742 help 743 Say Y here if you want to enable support for the Sony ACX565AKM 744 800x600 3.5" panel (found on the Nokia N900). 745 746config DRM_PANEL_SONY_TD4353_JDI 747 tristate "Sony TD4353 JDI panel" 748 depends on GPIOLIB && OF 749 depends on DRM_MIPI_DSI 750 depends on BACKLIGHT_CLASS_DEVICE 751 help 752 Say Y here if you want to enable support for the Sony Tama 753 TD4353 JDI command mode panel as found on some Sony Xperia 754 XZ2 and XZ2 Compact smartphones. 755 756config DRM_PANEL_SONY_TULIP_TRULY_NT35521 757 tristate "Sony Tulip Truly NT35521 panel" 758 depends on GPIOLIB && OF 759 depends on DRM_MIPI_DSI 760 depends on BACKLIGHT_CLASS_DEVICE 761 help 762 Say Y here if you want to enable support for the Sony Tulip 763 NT35521 1280x720 video mode panel as found on Sony Xperia M4 764 Aqua phone. 765 766config DRM_PANEL_STARTEK_KD070FHFID015 767 tristate "STARTEK KD070FHFID015 panel" 768 depends on OF 769 depends on DRM_MIPI_DSI 770 depends on BACKLIGHT_CLASS_DEVICE 771 help 772 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel 773 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display 774 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to 775 the host, a built-in LED backlight and touch controller. 776 777config DRM_PANEL_TDO_TL070WSH30 778 tristate "TDO TL070WSH30 DSI panel" 779 depends on OF 780 depends on DRM_MIPI_DSI 781 depends on BACKLIGHT_CLASS_DEVICE 782 help 783 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 784 panel module. The panel has a 1024×600 resolution and uses 785 24 bit RGB per pixel. It provides a MIPI DSI interface to 786 the host, a built-in LED backlight and touch controller. 787 788config DRM_PANEL_TPO_TD028TTEC1 789 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 790 depends on OF && SPI 791 depends on BACKLIGHT_CLASS_DEVICE 792 help 793 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 794 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 795 796config DRM_PANEL_TPO_TD043MTEA1 797 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 798 depends on GPIOLIB && OF && REGULATOR && SPI 799 help 800 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 801 4.3" panel (found on the OMAP3 Pandora board). 802 803config DRM_PANEL_TPO_TPG110 804 tristate "TPO TPG 800x400 panel" 805 depends on OF && SPI && GPIOLIB 806 depends on BACKLIGHT_CLASS_DEVICE 807 help 808 Say Y here if you want to enable support for TPO TPG110 809 400CH LTPS TFT LCD Single Chip Digital Driver for up to 810 800x400 LCD panels. 811 812config DRM_PANEL_TRULY_NT35597_WQXGA 813 tristate "Truly WQXGA" 814 depends on OF 815 depends on DRM_MIPI_DSI 816 help 817 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 818 Video Mode panel 819 820config DRM_PANEL_VISIONOX_RM69299 821 tristate "Visionox RM69299" 822 depends on OF 823 depends on DRM_MIPI_DSI 824 help 825 Say Y here if you want to enable support for Visionox 826 RM69299 DSI Video Mode panel. 827 828config DRM_PANEL_VISIONOX_VTDR6130 829 tristate "Visionox VTDR6130" 830 depends on OF 831 depends on DRM_MIPI_DSI 832 depends on BACKLIGHT_CLASS_DEVICE 833 help 834 Say Y here if you want to enable support for Visionox 835 VTDR6130 1080x2400 AMOLED DSI panel. 836 837config DRM_PANEL_VISIONOX_R66451 838 tristate "Visionox R66451" 839 depends on OF 840 depends on DRM_MIPI_DSI 841 depends on BACKLIGHT_CLASS_DEVICE 842 select DRM_DISPLAY_DP_HELPER 843 select DRM_DISPLAY_HELPER 844 help 845 Say Y here if you want to enable support for Visionox 846 R66451 1080x2340 AMOLED DSI panel. 847 848config DRM_PANEL_WIDECHIPS_WS2401 849 tristate "Widechips WS2401 DPI panel driver" 850 depends on SPI && GPIOLIB 851 depends on BACKLIGHT_CLASS_DEVICE 852 select DRM_MIPI_DBI 853 help 854 Say Y here if you want to enable support for the Widechips WS2401 DPI 855 480x800 display controller used in panels such as Samsung LMS380KF01. 856 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 857 858config DRM_PANEL_XINPENG_XPP055C272 859 tristate "Xinpeng XPP055C272 panel driver" 860 depends on OF 861 depends on DRM_MIPI_DSI 862 depends on BACKLIGHT_CLASS_DEVICE 863 help 864 Say Y here if you want to enable support for the Xinpeng 865 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 866 system interfaces. 867endmenu 868