1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TH101MB31UIG002_28A 71 tristate "Boe TH101MB31UIG002-28A panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to enable support for Boe 77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280 78 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI 79 interface to the host and has a built-in LED backlight. 80 81config DRM_PANEL_BOE_TV101WUM_NL6 82 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 83 depends on OF 84 depends on DRM_MIPI_DSI 85 depends on BACKLIGHT_CLASS_DEVICE 86 help 87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 88 45NA WUXGA PANEL DSI Video Mode panel 89 90config DRM_PANEL_EBBG_FT8719 91 tristate "EBBG FT8719 panel driver" 92 depends on OF 93 depends on DRM_MIPI_DSI 94 depends on BACKLIGHT_CLASS_DEVICE 95 help 96 Say Y here if you want to enable support for the EBBG FT8719 97 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 98 The panel has a resolution of 1080x2246. It provides a MIPI DSI 99 interface to the host. 100 101config DRM_PANEL_ELIDA_KD35T133 102 tristate "Elida KD35T133 panel driver" 103 depends on OF 104 depends on DRM_MIPI_DSI 105 depends on BACKLIGHT_CLASS_DEVICE 106 help 107 Say Y here if you want to enable support for the Elida 108 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 109 system interfaces. 110 111config DRM_PANEL_FEIXIN_K101_IM2BA02 112 tristate "Feixin K101 IM2BA02 panel" 113 depends on OF 114 depends on DRM_MIPI_DSI 115 depends on BACKLIGHT_CLASS_DEVICE 116 help 117 Say Y here if you want to enable support for the Feixin K101 IM2BA02 118 4-lane 800x1280 MIPI DSI panel. 119 120config DRM_PANEL_FEIYANG_FY07024DI26A30D 121 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 122 depends on OF 123 depends on DRM_MIPI_DSI 124 depends on BACKLIGHT_CLASS_DEVICE 125 help 126 Say Y if you want to enable support for panels based on the 127 Feiyang FY07024DI26A30-D MIPI-DSI interface. 128 129config DRM_PANEL_DSI_CM 130 tristate "Generic DSI command mode panels" 131 depends on OF 132 depends on DRM_MIPI_DSI 133 depends on BACKLIGHT_CLASS_DEVICE 134 help 135 DRM panel driver for DSI command mode panels with support for 136 embedded and external backlights. 137 138config DRM_PANEL_LVDS 139 tristate "Generic LVDS panel driver" 140 depends on OF 141 depends on BACKLIGHT_CLASS_DEVICE 142 select VIDEOMODE_HELPERS 143 help 144 This driver supports LVDS panels that don't require device-specific 145 handling of power supplies or control signals. It implements automatic 146 backlight handling if the panel is attached to a backlight controller. 147 148config DRM_PANEL_HIMAX_HX83112A 149 tristate "Himax HX83112A-based DSI panel" 150 depends on OF 151 depends on DRM_MIPI_DSI 152 depends on BACKLIGHT_CLASS_DEVICE 153 select DRM_KMS_HELPER 154 help 155 Say Y here if you want to enable support for Himax HX83112A-based 156 display panels, such as the one found in the Fairphone 4 smartphone. 157 158config DRM_PANEL_HIMAX_HX8394 159 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 160 depends on OF 161 depends on DRM_MIPI_DSI 162 depends on BACKLIGHT_CLASS_DEVICE 163 help 164 Say Y if you want to enable support for panels based on the 165 Himax HX8394 controller, such as the HannStar HSD060BHW4 166 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 167 168 If M is selected the module will be called panel-himax-hx8394. 169 170config DRM_PANEL_ILITEK_IL9322 171 tristate "Ilitek ILI9322 320x240 QVGA panels" 172 depends on OF && SPI 173 select REGMAP 174 help 175 Say Y here if you want to enable support for Ilitek IL9322 176 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 177 178config DRM_PANEL_ILITEK_ILI9341 179 tristate "Ilitek ILI9341 240x320 QVGA panels" 180 depends on OF && SPI 181 select DRM_KMS_HELPER 182 select DRM_GEM_DMA_HELPER 183 depends on BACKLIGHT_CLASS_DEVICE 184 select DRM_MIPI_DBI 185 help 186 Say Y here if you want to enable support for Ilitek IL9341 187 QVGA (240x320) RGB panels. support serial & parallel rgb 188 interface. 189 190config DRM_PANEL_ILITEK_ILI9805 191 tristate "Ilitek ILI9805-based panels" 192 depends on OF 193 depends on DRM_MIPI_DSI 194 depends on BACKLIGHT_CLASS_DEVICE 195 help 196 Say Y if you want to enable support for panels based on the 197 Ilitek ILI9805 controller. 198 199config DRM_PANEL_ILITEK_ILI9881C 200 tristate "Ilitek ILI9881C-based panels" 201 depends on OF 202 depends on DRM_MIPI_DSI 203 depends on BACKLIGHT_CLASS_DEVICE 204 help 205 Say Y if you want to enable support for panels based on the 206 Ilitek ILI9881c controller. 207 208config DRM_PANEL_ILITEK_ILI9882T 209 tristate "Ilitek ILI9882t-based panels" 210 depends on OF 211 depends on DRM_MIPI_DSI 212 depends on BACKLIGHT_CLASS_DEVICE 213 help 214 Say Y if you want to enable support for panels based on the 215 Ilitek ILI9882t controller. 216 217config DRM_PANEL_INNOLUX_EJ030NA 218 tristate "Innolux EJ030NA 320x480 LCD panel" 219 depends on OF && SPI 220 select REGMAP_SPI 221 help 222 Say Y here to enable support for the Innolux/Chimei EJ030NA 223 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 224 and LDK handheld gaming consoles. 225 226config DRM_PANEL_INNOLUX_P079ZCA 227 tristate "Innolux P079ZCA panel" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y here if you want to enable support for Innolux P079ZCA 233 TFT-LCD modules. The panel has a 1024x768 resolution and uses 234 24 bit RGB per pixel. It provides a MIPI DSI interface to 235 the host and has a built-in LED backlight. 236 237config DRM_PANEL_JADARD_JD9365DA_H3 238 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 239 depends on OF 240 depends on DRM_MIPI_DSI 241 depends on BACKLIGHT_CLASS_DEVICE 242 help 243 Say Y here if you want to enable support for Jadard JD9365DA-H3 244 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 245 800RGBx1280 dots at maximum. 246 247config DRM_PANEL_JDI_LPM102A188A 248 tristate "JDI LPM102A188A DSI panel" 249 depends on OF && GPIOLIB 250 depends on DRM_MIPI_DSI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for JDI LPM102A188A DSI 254 command mode panel as found in Google Pixel C devices. 255 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface 256 to the host. 257 258config DRM_PANEL_JDI_LT070ME05000 259 tristate "JDI LT070ME05000 WUXGA DSI panel" 260 depends on OF 261 depends on DRM_MIPI_DSI 262 depends on BACKLIGHT_CLASS_DEVICE 263 help 264 Say Y here if you want to enable support for JDI DSI video mode 265 panel as found in Google Nexus 7 (2013) devices. 266 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 267 24 bit per pixel. 268 269config DRM_PANEL_JDI_R63452 270 tristate "JDI R63452 Full HD DSI panel" 271 depends on OF 272 depends on DRM_MIPI_DSI 273 depends on BACKLIGHT_CLASS_DEVICE 274 help 275 Say Y here if you want to enable support for the JDI R63452 276 DSI command mode panel as found in Xiaomi Mi 5 Devices. 277 278config DRM_PANEL_KHADAS_TS050 279 tristate "Khadas TS050 panel" 280 depends on OF 281 depends on DRM_MIPI_DSI 282 depends on BACKLIGHT_CLASS_DEVICE 283 help 284 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 285 panel module. The panel has a 1080x1920 resolution and uses 286 24 bit RGB per pixel. It provides a MIPI DSI interface to 287 the host, a built-in LED backlight and touch controller. 288 289config DRM_PANEL_KINGDISPLAY_KD097D04 290 tristate "Kingdisplay kd097d04 panel" 291 depends on OF 292 depends on DRM_MIPI_DSI 293 depends on BACKLIGHT_CLASS_DEVICE 294 help 295 Say Y here if you want to enable support for Kingdisplay kd097d04 296 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 297 24 bit RGB per pixel. It provides a MIPI DSI interface to 298 the host and has a built-in LED backlight. 299 300config DRM_PANEL_LEADTEK_LTK050H3146W 301 tristate "Leadtek LTK050H3146W panel" 302 depends on OF 303 depends on DRM_MIPI_DSI 304 depends on BACKLIGHT_CLASS_DEVICE 305 help 306 Say Y here if you want to enable support for Leadtek LTK050H3146W 307 TFT-LCD modules. The panel has a 720x1280 resolution and uses 308 24 bit RGB per pixel. It provides a MIPI DSI interface to 309 the host and has a built-in LED backlight. 310 311config DRM_PANEL_LEADTEK_LTK500HD1829 312 tristate "Leadtek LTK500HD1829 panel" 313 depends on OF 314 depends on DRM_MIPI_DSI 315 depends on BACKLIGHT_CLASS_DEVICE 316 help 317 Say Y here if you want to enable support for Kingdisplay kd097d04 318 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 319 24 bit RGB per pixel. It provides a MIPI DSI interface to 320 the host and has a built-in LED backlight. 321 322config DRM_PANEL_LG_LB035Q02 323 tristate "LG LB035Q024573 RGB panel" 324 depends on GPIOLIB && OF && SPI 325 help 326 Say Y here if you want to enable support for the LB035Q02 RGB panel 327 (found on the Gumstix Overo Palo35 board). To compile this driver as 328 a module, choose M here. 329 330config DRM_PANEL_LG_LG4573 331 tristate "LG4573 RGB/SPI panel" 332 depends on OF && SPI 333 select VIDEOMODE_HELPERS 334 help 335 Say Y here if you want to enable support for LG4573 RGB panel. 336 To compile this driver as a module, choose M here. 337 338config DRM_PANEL_MAGNACHIP_D53E6EA8966 339 tristate "Magnachip D53E6EA8966 DSI panel" 340 depends on OF && SPI 341 depends on DRM_MIPI_DSI 342 depends on BACKLIGHT_CLASS_DEVICE 343 select DRM_MIPI_DBI 344 help 345 DRM panel driver for the Samsung AMS495QA01 panel controlled 346 with the Magnachip D53E6EA8966 panel IC. This panel receives 347 video data via DSI but commands via 9-bit SPI using DBI. 348 349config DRM_PANEL_MANTIX_MLAF057WE51 350 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 351 depends on OF 352 depends on DRM_MIPI_DSI 353 depends on BACKLIGHT_CLASS_DEVICE 354 help 355 Say Y here if you want to enable support for the Mantix 356 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 357 has a resolution of 720x1440 pixels, a built in backlight and touch 358 controller. 359 360config DRM_PANEL_NEC_NL8048HL11 361 tristate "NEC NL8048HL11 RGB panel" 362 depends on GPIOLIB && OF && SPI 363 help 364 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 365 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 366 as a module, choose M here. 367 368config DRM_PANEL_NEWVISION_NV3051D 369 tristate "NewVision NV3051D DSI panel" 370 depends on OF 371 depends on DRM_MIPI_DSI 372 depends on BACKLIGHT_CLASS_DEVICE 373 help 374 This driver supports the NV3051D based panel found on the Anbernic 375 RG353P and RG353V. 376 377config DRM_PANEL_NEWVISION_NV3052C 378 tristate "NewVision NV3052C RGB/SPI panel" 379 depends on OF && SPI 380 depends on BACKLIGHT_CLASS_DEVICE 381 select DRM_MIPI_DBI 382 help 383 Say Y here if you want to enable support for the panels built 384 around the NewVision NV3052C display controller. 385 386config DRM_PANEL_NOVATEK_NT35510 387 tristate "Novatek NT35510 RGB panel driver" 388 depends on OF 389 depends on DRM_MIPI_DSI 390 depends on BACKLIGHT_CLASS_DEVICE 391 help 392 Say Y here if you want to enable support for the panels built 393 around the Novatek NT35510 display controller, such as some 394 Hydis panels. 395 396config DRM_PANEL_NOVATEK_NT35560 397 tristate "Novatek NT35560 DSI command mode panel" 398 depends on OF 399 depends on DRM_MIPI_DSI 400 depends on BACKLIGHT_CLASS_DEVICE 401 select VIDEOMODE_HELPERS 402 help 403 Say Y here if you want to enable the Novatek NT35560 display 404 controller. This panel supports DSI in both command and video 405 mode. This supports several panels such as Sony ACX424AKM and 406 ACX424AKP. 407 408config DRM_PANEL_NOVATEK_NT35950 409 tristate "Novatek NT35950 DSI panel" 410 depends on OF 411 depends on DRM_MIPI_DSI 412 depends on BACKLIGHT_CLASS_DEVICE 413 help 414 Say Y here if you want to enable support for the panels built 415 around the Novatek NT35950 display controller, such as some 416 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 417 mobile phones. 418 419config DRM_PANEL_NOVATEK_NT36523 420 tristate "Novatek NT36523 panel driver" 421 depends on OF 422 depends on DRM_MIPI_DSI 423 depends on BACKLIGHT_CLASS_DEVICE 424 help 425 Say Y here if you want to enable support for the panels built 426 around the Novatek NT36523 display controller, such as some 427 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. 428 429config DRM_PANEL_NOVATEK_NT36672A 430 tristate "Novatek NT36672A DSI panel" 431 depends on OF 432 depends on DRM_MIPI_DSI 433 depends on BACKLIGHT_CLASS_DEVICE 434 help 435 Say Y here if you want to enable support for the panels built 436 around the Novatek NT36672A display controller, such as some 437 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 438 439config DRM_PANEL_NOVATEK_NT36672E 440 tristate "Novatek NT36672E DSI panel" 441 depends on OF 442 depends on DRM_MIPI_DSI 443 depends on BACKLIGHT_CLASS_DEVICE 444 help 445 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode 446 LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit 447 RGB per pixel. 448 449config DRM_PANEL_NOVATEK_NT39016 450 tristate "Novatek NT39016 RGB/SPI panel" 451 depends on OF && SPI 452 depends on BACKLIGHT_CLASS_DEVICE 453 select REGMAP_SPI 454 help 455 Say Y here if you want to enable support for the panels built 456 around the Novatek NT39016 display controller. 457 458config DRM_PANEL_OLIMEX_LCD_OLINUXINO 459 tristate "Olimex LCD-OLinuXino panel" 460 depends on OF 461 depends on I2C 462 depends on BACKLIGHT_CLASS_DEVICE 463 select CRC32 464 help 465 The panel is used with different sizes LCDs, from 480x272 to 466 1280x800, and 24 bit per pixel. 467 468 Say Y here if you want to enable support for Olimex Ltd. 469 LCD-OLinuXino panel. 470 471config DRM_PANEL_ORISETECH_OTA5601A 472 tristate "Orise Technology ota5601a RGB/SPI panel" 473 depends on SPI 474 depends on BACKLIGHT_CLASS_DEVICE 475 select REGMAP_SPI 476 help 477 Say Y here if you want to enable support for the panels built 478 around the Orise Technology OTA9601A display controller. 479 480config DRM_PANEL_ORISETECH_OTM8009A 481 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 482 depends on OF 483 depends on DRM_MIPI_DSI 484 depends on BACKLIGHT_CLASS_DEVICE 485 help 486 Say Y here if you want to enable support for Orise Technology 487 otm8009a 480x800 dsi 2dl panel. 488 489config DRM_PANEL_OSD_OSD101T2587_53TS 490 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 491 depends on OF 492 depends on DRM_MIPI_DSI 493 depends on BACKLIGHT_CLASS_DEVICE 494 help 495 Say Y here if you want to enable support for One Stop Displays 496 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 497 498config DRM_PANEL_PANASONIC_VVX10F034N00 499 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 500 depends on OF 501 depends on DRM_MIPI_DSI 502 depends on BACKLIGHT_CLASS_DEVICE 503 help 504 Say Y here if you want to enable support for Panasonic VVX10F034N00 505 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 506 Xperia Z2 tablets 507 508config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 509 tristate "Raspberry Pi 7-inch touchscreen panel" 510 depends on DRM_MIPI_DSI 511 help 512 Say Y here if you want to enable support for the Raspberry 513 Pi 7" Touchscreen. To compile this driver as a module, 514 choose M here. 515 516config DRM_PANEL_RAYDIUM_RM67191 517 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 518 depends on OF 519 depends on DRM_MIPI_DSI 520 depends on BACKLIGHT_CLASS_DEVICE 521 help 522 Say Y here if you want to enable support for Raydium RM67191 FHD 523 (1080x1920) DSI panel. 524 525config DRM_PANEL_RAYDIUM_RM68200 526 tristate "Raydium RM68200 720x1280 DSI video mode panel" 527 depends on OF 528 depends on DRM_MIPI_DSI 529 depends on BACKLIGHT_CLASS_DEVICE 530 help 531 Say Y here if you want to enable support for Raydium RM68200 532 720x1280 DSI video mode panel. 533 534config DRM_PANEL_RAYDIUM_RM692E5 535 tristate "Raydium RM692E5-based DSI panel" 536 depends on OF 537 depends on DRM_MIPI_DSI 538 depends on BACKLIGHT_CLASS_DEVICE 539 select DRM_DISPLAY_DP_HELPER 540 select DRM_DISPLAY_HELPER 541 help 542 Say Y here if you want to enable support for Raydium RM692E5-based 543 display panels, such as the one found in the Fairphone 5 smartphone. 544 545config DRM_PANEL_RONBO_RB070D30 546 tristate "Ronbo Electronics RB070D30 panel" 547 depends on OF 548 depends on DRM_MIPI_DSI 549 depends on BACKLIGHT_CLASS_DEVICE 550 help 551 Say Y here if you want to enable support for Ronbo Electronics 552 RB070D30 1024x600 DSI panel. 553 554config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 555 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 556 depends on OF 557 select DRM_MIPI_DSI 558 select VIDEOMODE_HELPERS 559 560config DRM_PANEL_SAMSUNG_ATNA33XC20 561 tristate "Samsung ATNA33XC20 eDP panel" 562 depends on OF 563 depends on BACKLIGHT_CLASS_DEVICE 564 depends on PM 565 select DRM_DISPLAY_DP_HELPER 566 select DRM_DISPLAY_HELPER 567 select DRM_DP_AUX_BUS 568 help 569 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 570 be handled by the DRM_PANEL_SIMPLE driver because its power 571 sequencing is non-standard. 572 573config DRM_PANEL_SAMSUNG_DB7430 574 tristate "Samsung DB7430-based DPI panels" 575 depends on OF && SPI && GPIOLIB 576 depends on BACKLIGHT_CLASS_DEVICE 577 select DRM_MIPI_DBI 578 help 579 Say Y here if you want to enable support for the Samsung 580 DB7430 DPI display controller used in such devices as the 581 LMS397KF04 480x800 DPI panel. 582 583config DRM_PANEL_SAMSUNG_LD9040 584 tristate "Samsung LD9040 RGB/SPI panel" 585 depends on OF && SPI 586 depends on BACKLIGHT_CLASS_DEVICE 587 select VIDEOMODE_HELPERS 588 589config DRM_PANEL_SAMSUNG_S6D16D0 590 tristate "Samsung S6D16D0 DSI video mode panel" 591 depends on OF 592 depends on DRM_MIPI_DSI 593 select VIDEOMODE_HELPERS 594 595config DRM_PANEL_SAMSUNG_S6D27A1 596 tristate "Samsung S6D27A1 DPI panel driver" 597 depends on OF && SPI && GPIOLIB 598 select DRM_MIPI_DBI 599 help 600 Say Y here if you want to enable support for the Samsung 601 S6D27A1 DPI 480x800 panel. 602 603 This panel can be found in Samsung Galaxy Ace 2 604 GT-I8160 mobile phone. 605 606config DRM_PANEL_SAMSUNG_S6D7AA0 607 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller" 608 depends on OF 609 depends on BACKLIGHT_CLASS_DEVICE 610 select DRM_MIPI_DSI 611 select VIDEOMODE_HELPERS 612 613config DRM_PANEL_SAMSUNG_S6E3HA2 614 tristate "Samsung S6E3HA2 DSI video mode panel" 615 depends on OF 616 depends on DRM_MIPI_DSI 617 depends on BACKLIGHT_CLASS_DEVICE 618 select VIDEOMODE_HELPERS 619 620config DRM_PANEL_SAMSUNG_S6E63J0X03 621 tristate "Samsung S6E63J0X03 DSI command mode panel" 622 depends on OF 623 depends on DRM_MIPI_DSI 624 depends on BACKLIGHT_CLASS_DEVICE 625 select VIDEOMODE_HELPERS 626 627config DRM_PANEL_SAMSUNG_S6E63M0 628 tristate "Samsung S6E63M0 RGB panel" 629 depends on OF 630 depends on BACKLIGHT_CLASS_DEVICE 631 help 632 Say Y here if you want to enable support for Samsung S6E63M0 633 AMOLED LCD panel. This panel can be accessed using SPI or 634 DSI. 635 636config DRM_PANEL_SAMSUNG_S6E63M0_SPI 637 tristate "Samsung S6E63M0 RGB SPI interface" 638 depends on SPI 639 depends on DRM_PANEL_SAMSUNG_S6E63M0 640 default DRM_PANEL_SAMSUNG_S6E63M0 641 select DRM_MIPI_DBI 642 help 643 Say Y here if you want to be able to access the Samsung 644 S6E63M0 panel using SPI. 645 646config DRM_PANEL_SAMSUNG_S6E63M0_DSI 647 tristate "Samsung S6E63M0 RGB DSI interface" 648 depends on DRM_MIPI_DSI 649 depends on DRM_PANEL_SAMSUNG_S6E63M0 650 help 651 Say Y here if you want to be able to access the Samsung 652 S6E63M0 panel using DSI. 653 654config DRM_PANEL_SAMSUNG_S6E8AA0 655 tristate "Samsung S6E8AA0 DSI video mode panel" 656 depends on OF 657 select DRM_MIPI_DSI 658 select VIDEOMODE_HELPERS 659 660config DRM_PANEL_SAMSUNG_SOFEF00 661 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 662 depends on OF 663 depends on DRM_MIPI_DSI 664 depends on BACKLIGHT_CLASS_DEVICE 665 select VIDEOMODE_HELPERS 666 help 667 Say Y or M here if you want to enable support for the Samsung AMOLED 668 command mode panels found in the OnePlus 6/6T smartphones. 669 670 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 671 672config DRM_PANEL_SEIKO_43WVF1G 673 tristate "Seiko 43WVF1G panel" 674 depends on OF 675 depends on BACKLIGHT_CLASS_DEVICE 676 select VIDEOMODE_HELPERS 677 help 678 Say Y here if you want to enable support for the Seiko 679 43WVF1G controller for 800x480 LCD panels 680 681config DRM_PANEL_SHARP_LQ101R1SX01 682 tristate "Sharp LQ101R1SX01 panel" 683 depends on OF 684 depends on DRM_MIPI_DSI 685 depends on BACKLIGHT_CLASS_DEVICE 686 help 687 Say Y here if you want to enable support for Sharp LQ101R1SX01 688 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 689 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 690 the host and has a built-in LED backlight. 691 692 To compile this driver as a module, choose M here: the module 693 will be called panel-sharp-lq101r1sx01. 694 695config DRM_PANEL_SHARP_LS037V7DW01 696 tristate "Sharp LS037V7DW01 VGA LCD panel" 697 depends on GPIOLIB && OF && REGULATOR 698 help 699 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 700 (480x640) LCD panel (found on the TI SDP3430 board). 701 702config DRM_PANEL_SHARP_LS043T1LE01 703 tristate "Sharp LS043T1LE01 qHD video mode panel" 704 depends on OF 705 depends on DRM_MIPI_DSI 706 depends on BACKLIGHT_CLASS_DEVICE 707 help 708 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 709 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 710 711config DRM_PANEL_SHARP_LS060T1SX01 712 tristate "Sharp LS060T1SX01 FullHD video mode panel" 713 depends on OF 714 depends on DRM_MIPI_DSI 715 depends on BACKLIGHT_CLASS_DEVICE 716 help 717 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 718 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 719 Bundle. 720 721config DRM_PANEL_SITRONIX_ST7701 722 tristate "Sitronix ST7701 panel driver" 723 depends on OF 724 depends on DRM_MIPI_DSI 725 depends on BACKLIGHT_CLASS_DEVICE 726 help 727 Say Y here if you want to enable support for the Sitronix 728 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 729 system interfaces. 730 731config DRM_PANEL_SITRONIX_ST7703 732 tristate "Sitronix ST7703 based MIPI touchscreen panels" 733 depends on OF 734 depends on DRM_MIPI_DSI 735 depends on BACKLIGHT_CLASS_DEVICE 736 help 737 Say Y here if you want to enable support for Sitronix ST7703 based 738 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 739 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 740 in backlight and touch controller. 741 Touch input support is provided by the goodix driver and needs to be 742 selected separately. 743 744config DRM_PANEL_SITRONIX_ST7789V 745 tristate "Sitronix ST7789V panel" 746 depends on OF && SPI 747 depends on BACKLIGHT_CLASS_DEVICE 748 help 749 Say Y here if you want to enable support for the Sitronix 750 ST7789V controller for 240x320 LCD panels 751 752config DRM_PANEL_SONY_ACX565AKM 753 tristate "Sony ACX565AKM panel" 754 depends on GPIOLIB && OF && SPI 755 depends on BACKLIGHT_CLASS_DEVICE 756 help 757 Say Y here if you want to enable support for the Sony ACX565AKM 758 800x600 3.5" panel (found on the Nokia N900). 759 760config DRM_PANEL_SONY_TD4353_JDI 761 tristate "Sony TD4353 JDI panel" 762 depends on GPIOLIB && OF 763 depends on DRM_MIPI_DSI 764 depends on BACKLIGHT_CLASS_DEVICE 765 help 766 Say Y here if you want to enable support for the Sony Tama 767 TD4353 JDI command mode panel as found on some Sony Xperia 768 XZ2 and XZ2 Compact smartphones. 769 770config DRM_PANEL_SONY_TULIP_TRULY_NT35521 771 tristate "Sony Tulip Truly NT35521 panel" 772 depends on GPIOLIB && OF 773 depends on DRM_MIPI_DSI 774 depends on BACKLIGHT_CLASS_DEVICE 775 help 776 Say Y here if you want to enable support for the Sony Tulip 777 NT35521 1280x720 video mode panel as found on Sony Xperia M4 778 Aqua phone. 779 780config DRM_PANEL_STARTEK_KD070FHFID015 781 tristate "STARTEK KD070FHFID015 panel" 782 depends on OF 783 depends on DRM_MIPI_DSI 784 depends on BACKLIGHT_CLASS_DEVICE 785 help 786 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel 787 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display 788 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to 789 the host, a built-in LED backlight and touch controller. 790 791config DRM_PANEL_EDP 792 tristate "support for simple Embedded DisplayPort panels" 793 depends on OF 794 depends on BACKLIGHT_CLASS_DEVICE 795 depends on PM 796 select VIDEOMODE_HELPERS 797 select DRM_DISPLAY_DP_HELPER 798 select DRM_DISPLAY_HELPER 799 select DRM_DP_AUX_BUS 800 select DRM_KMS_HELPER 801 help 802 DRM panel driver for dumb eDP panels that need at most a regulator and 803 a GPIO to be powered up. Optionally a backlight can be attached so 804 that it can be automatically turned off when the panel goes into a 805 low power state. 806 807config DRM_PANEL_SIMPLE 808 tristate "support for simple panels (other than eDP ones)" 809 depends on OF 810 depends on BACKLIGHT_CLASS_DEVICE 811 depends on PM 812 select VIDEOMODE_HELPERS 813 help 814 DRM panel driver for dumb non-eDP panels that need at most a regulator 815 and a GPIO to be powered up. Optionally a backlight can be attached so 816 that it can be automatically turned off when the panel goes into a 817 low power state. 818 819config DRM_PANEL_SYNAPTICS_R63353 820 tristate "Synaptics R63353-based panels" 821 depends on OF 822 depends on DRM_MIPI_DSI 823 depends on BACKLIGHT_CLASS_DEVICE 824 help 825 Say Y if you want to enable support for panels based on the 826 Synaptics R63353 controller. 827 828config DRM_PANEL_TDO_TL070WSH30 829 tristate "TDO TL070WSH30 DSI panel" 830 depends on OF 831 depends on DRM_MIPI_DSI 832 depends on BACKLIGHT_CLASS_DEVICE 833 help 834 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 835 panel module. The panel has a 1024×600 resolution and uses 836 24 bit RGB per pixel. It provides a MIPI DSI interface to 837 the host, a built-in LED backlight and touch controller. 838 839config DRM_PANEL_TPO_TD028TTEC1 840 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 841 depends on OF && SPI 842 depends on BACKLIGHT_CLASS_DEVICE 843 help 844 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 845 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 846 847config DRM_PANEL_TPO_TD043MTEA1 848 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 849 depends on GPIOLIB && OF && REGULATOR && SPI 850 help 851 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 852 4.3" panel (found on the OMAP3 Pandora board). 853 854config DRM_PANEL_TPO_TPG110 855 tristate "TPO TPG 800x400 panel" 856 depends on OF && SPI && GPIOLIB 857 depends on BACKLIGHT_CLASS_DEVICE 858 help 859 Say Y here if you want to enable support for TPO TPG110 860 400CH LTPS TFT LCD Single Chip Digital Driver for up to 861 800x400 LCD panels. 862 863config DRM_PANEL_TRULY_NT35597_WQXGA 864 tristate "Truly WQXGA" 865 depends on OF 866 depends on DRM_MIPI_DSI 867 help 868 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 869 Video Mode panel 870 871config DRM_PANEL_VISIONOX_R66451 872 tristate "Visionox R66451" 873 depends on OF 874 depends on DRM_MIPI_DSI 875 depends on BACKLIGHT_CLASS_DEVICE 876 select DRM_DISPLAY_DP_HELPER 877 select DRM_DISPLAY_HELPER 878 help 879 Say Y here if you want to enable support for Visionox 880 R66451 1080x2340 AMOLED DSI panel. 881 882config DRM_PANEL_VISIONOX_RM69299 883 tristate "Visionox RM69299" 884 depends on OF 885 depends on DRM_MIPI_DSI 886 help 887 Say Y here if you want to enable support for Visionox 888 RM69299 DSI Video Mode panel. 889 890config DRM_PANEL_VISIONOX_VTDR6130 891 tristate "Visionox VTDR6130" 892 depends on OF 893 depends on DRM_MIPI_DSI 894 depends on BACKLIGHT_CLASS_DEVICE 895 help 896 Say Y here if you want to enable support for Visionox 897 VTDR6130 1080x2400 AMOLED DSI panel. 898 899config DRM_PANEL_WIDECHIPS_WS2401 900 tristate "Widechips WS2401 DPI panel driver" 901 depends on SPI && GPIOLIB 902 depends on BACKLIGHT_CLASS_DEVICE 903 select DRM_MIPI_DBI 904 help 905 Say Y here if you want to enable support for the Widechips WS2401 DPI 906 480x800 display controller used in panels such as Samsung LMS380KF01. 907 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 908 909config DRM_PANEL_XINPENG_XPP055C272 910 tristate "Xinpeng XPP055C272 panel driver" 911 depends on OF 912 depends on DRM_MIPI_DSI 913 depends on BACKLIGHT_CLASS_DEVICE 914 help 915 Say Y here if you want to enable support for the Xinpeng 916 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 917 system interfaces. 918endmenu 919