1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_BOE_BF060Y8M_AJ0 41 tristate "Boe BF060Y8M-AJ0 panel" 42 depends on OF 43 depends on DRM_MIPI_DSI 44 depends on BACKLIGHT_CLASS_DEVICE 45 help 46 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 47 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 48 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 49 the host and backlight is controlled through DSI commands. 50 51config DRM_PANEL_BOE_HIMAX8279D 52 tristate "Boe Himax8279d panel" 53 depends on OF 54 depends on DRM_MIPI_DSI 55 depends on BACKLIGHT_CLASS_DEVICE 56 help 57 Say Y here if you want to enable support for Boe Himax8279d 58 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 59 24 bit RGB per pixel. It provides a MIPI DSI interface to 60 the host and has a built-in LED backlight. 61 62config DRM_PANEL_BOE_TV101WUM_NL6 63 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 64 depends on OF 65 depends on DRM_MIPI_DSI 66 depends on BACKLIGHT_CLASS_DEVICE 67 help 68 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 69 45NA WUXGA PANEL DSI Video Mode panel 70 71config DRM_PANEL_DSI_CM 72 tristate "Generic DSI command mode panels" 73 depends on OF 74 depends on DRM_MIPI_DSI 75 depends on BACKLIGHT_CLASS_DEVICE 76 help 77 DRM panel driver for DSI command mode panels with support for 78 embedded and external backlights. 79 80config DRM_PANEL_LVDS 81 tristate "Generic LVDS panel driver" 82 depends on OF 83 depends on BACKLIGHT_CLASS_DEVICE 84 select VIDEOMODE_HELPERS 85 help 86 This driver supports LVDS panels that don't require device-specific 87 handling of power supplies or control signals. It implements automatic 88 backlight handling if the panel is attached to a backlight controller. 89 90config DRM_PANEL_SIMPLE 91 tristate "support for simple panels (other than eDP ones)" 92 depends on OF 93 depends on BACKLIGHT_CLASS_DEVICE 94 depends on PM 95 select VIDEOMODE_HELPERS 96 help 97 DRM panel driver for dumb non-eDP panels that need at most a regulator 98 and a GPIO to be powered up. Optionally a backlight can be attached so 99 that it can be automatically turned off when the panel goes into a 100 low power state. 101 102config DRM_PANEL_EDP 103 tristate "support for simple Embedded DisplayPort panels" 104 depends on OF 105 depends on BACKLIGHT_CLASS_DEVICE 106 depends on PM 107 select VIDEOMODE_HELPERS 108 select DRM_DISPLAY_DP_HELPER 109 select DRM_DISPLAY_HELPER 110 select DRM_DP_AUX_BUS 111 select DRM_KMS_HELPER 112 help 113 DRM panel driver for dumb eDP panels that need at most a regulator and 114 a GPIO to be powered up. Optionally a backlight can be attached so 115 that it can be automatically turned off when the panel goes into a 116 low power state. 117 118config DRM_PANEL_EBBG_FT8719 119 tristate "EBBG FT8719 panel driver" 120 depends on OF 121 depends on DRM_MIPI_DSI 122 depends on BACKLIGHT_CLASS_DEVICE 123 help 124 Say Y here if you want to enable support for the EBBG FT8719 125 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 126 The panel has a resolution of 1080x2246. It provides a MIPI DSI 127 interface to the host. 128 129config DRM_PANEL_ELIDA_KD35T133 130 tristate "Elida KD35T133 panel driver" 131 depends on OF 132 depends on DRM_MIPI_DSI 133 depends on BACKLIGHT_CLASS_DEVICE 134 help 135 Say Y here if you want to enable support for the Elida 136 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 137 system interfaces. 138 139config DRM_PANEL_FEIXIN_K101_IM2BA02 140 tristate "Feixin K101 IM2BA02 panel" 141 depends on OF 142 depends on DRM_MIPI_DSI 143 depends on BACKLIGHT_CLASS_DEVICE 144 help 145 Say Y here if you want to enable support for the Feixin K101 IM2BA02 146 4-lane 800x1280 MIPI DSI panel. 147 148config DRM_PANEL_FEIYANG_FY07024DI26A30D 149 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 150 depends on OF 151 depends on DRM_MIPI_DSI 152 depends on BACKLIGHT_CLASS_DEVICE 153 help 154 Say Y if you want to enable support for panels based on the 155 Feiyang FY07024DI26A30-D MIPI-DSI interface. 156 157config DRM_PANEL_ILITEK_IL9322 158 tristate "Ilitek ILI9322 320x240 QVGA panels" 159 depends on OF && SPI 160 select REGMAP 161 help 162 Say Y here if you want to enable support for Ilitek IL9322 163 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 164 165config DRM_PANEL_ILITEK_ILI9341 166 tristate "Ilitek ILI9341 240x320 QVGA panels" 167 depends on OF && SPI 168 depends on DRM_KMS_HELPER 169 depends on DRM_GEM_CMA_HELPER 170 depends on BACKLIGHT_CLASS_DEVICE 171 select DRM_MIPI_DBI 172 help 173 Say Y here if you want to enable support for Ilitek IL9341 174 QVGA (240x320) RGB panels. support serial & parallel rgb 175 interface. 176 177config DRM_PANEL_ILITEK_ILI9881C 178 tristate "Ilitek ILI9881C-based panels" 179 depends on OF 180 depends on DRM_MIPI_DSI 181 depends on BACKLIGHT_CLASS_DEVICE 182 help 183 Say Y if you want to enable support for panels based on the 184 Ilitek ILI9881c controller. 185 186config DRM_PANEL_INNOLUX_EJ030NA 187 tristate "Innolux EJ030NA 320x480 LCD panel" 188 depends on OF && SPI 189 select REGMAP_SPI 190 help 191 Say Y here to enable support for the Innolux/Chimei EJ030NA 192 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 193 and LDK handheld gaming consoles. 194 195config DRM_PANEL_INNOLUX_P079ZCA 196 tristate "Innolux P079ZCA panel" 197 depends on OF 198 depends on DRM_MIPI_DSI 199 depends on BACKLIGHT_CLASS_DEVICE 200 help 201 Say Y here if you want to enable support for Innolux P079ZCA 202 TFT-LCD modules. The panel has a 1024x768 resolution and uses 203 24 bit RGB per pixel. It provides a MIPI DSI interface to 204 the host and has a built-in LED backlight. 205 206config DRM_PANEL_JDI_LT070ME05000 207 tristate "JDI LT070ME05000 WUXGA DSI panel" 208 depends on OF 209 depends on DRM_MIPI_DSI 210 depends on BACKLIGHT_CLASS_DEVICE 211 help 212 Say Y here if you want to enable support for JDI DSI video mode 213 panel as found in Google Nexus 7 (2013) devices. 214 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 215 24 bit per pixel. 216 217config DRM_PANEL_JDI_R63452 218 tristate "JDI R63452 Full HD DSI panel" 219 depends on OF 220 depends on DRM_MIPI_DSI 221 depends on BACKLIGHT_CLASS_DEVICE 222 help 223 Say Y here if you want to enable support for the JDI R63452 224 DSI command mode panel as found in Xiaomi Mi 5 Devices. 225 226config DRM_PANEL_KHADAS_TS050 227 tristate "Khadas TS050 panel" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 233 panel module. The panel has a 1080x1920 resolution and uses 234 24 bit RGB per pixel. It provides a MIPI DSI interface to 235 the host, a built-in LED backlight and touch controller. 236 237config DRM_PANEL_KINGDISPLAY_KD097D04 238 tristate "Kingdisplay kd097d04 panel" 239 depends on OF 240 depends on DRM_MIPI_DSI 241 depends on BACKLIGHT_CLASS_DEVICE 242 help 243 Say Y here if you want to enable support for Kingdisplay kd097d04 244 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 245 24 bit RGB per pixel. It provides a MIPI DSI interface to 246 the host and has a built-in LED backlight. 247 248config DRM_PANEL_LEADTEK_LTK050H3146W 249 tristate "Leadtek LTK050H3146W panel" 250 depends on OF 251 depends on DRM_MIPI_DSI 252 depends on BACKLIGHT_CLASS_DEVICE 253 help 254 Say Y here if you want to enable support for Leadtek LTK050H3146W 255 TFT-LCD modules. The panel has a 720x1280 resolution and uses 256 24 bit RGB per pixel. It provides a MIPI DSI interface to 257 the host and has a built-in LED backlight. 258 259config DRM_PANEL_LEADTEK_LTK500HD1829 260 tristate "Leadtek LTK500HD1829 panel" 261 depends on OF 262 depends on DRM_MIPI_DSI 263 depends on BACKLIGHT_CLASS_DEVICE 264 help 265 Say Y here if you want to enable support for Kingdisplay kd097d04 266 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 267 24 bit RGB per pixel. It provides a MIPI DSI interface to 268 the host and has a built-in LED backlight. 269 270config DRM_PANEL_SAMSUNG_LD9040 271 tristate "Samsung LD9040 RGB/SPI panel" 272 depends on OF && SPI 273 select VIDEOMODE_HELPERS 274 275config DRM_PANEL_LG_LB035Q02 276 tristate "LG LB035Q024573 RGB panel" 277 depends on GPIOLIB && OF && SPI 278 help 279 Say Y here if you want to enable support for the LB035Q02 RGB panel 280 (found on the Gumstix Overo Palo35 board). To compile this driver as 281 a module, choose M here. 282 283config DRM_PANEL_LG_LG4573 284 tristate "LG4573 RGB/SPI panel" 285 depends on OF && SPI 286 select VIDEOMODE_HELPERS 287 help 288 Say Y here if you want to enable support for LG4573 RGB panel. 289 To compile this driver as a module, choose M here. 290 291config DRM_PANEL_NEC_NL8048HL11 292 tristate "NEC NL8048HL11 RGB panel" 293 depends on GPIOLIB && OF && SPI 294 help 295 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 296 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 297 as a module, choose M here. 298 299config DRM_PANEL_NEWVISION_NV3052C 300 tristate "NewVision NV3052C RGB/SPI panel" 301 depends on OF && SPI 302 depends on BACKLIGHT_CLASS_DEVICE 303 select DRM_MIPI_DBI 304 help 305 Say Y here if you want to enable support for the panels built 306 around the NewVision NV3052C display controller. 307 308config DRM_PANEL_NOVATEK_NT35510 309 tristate "Novatek NT35510 RGB panel driver" 310 depends on OF 311 depends on DRM_MIPI_DSI 312 depends on BACKLIGHT_CLASS_DEVICE 313 help 314 Say Y here if you want to enable support for the panels built 315 around the Novatek NT35510 display controller, such as some 316 Hydis panels. 317 318config DRM_PANEL_NOVATEK_NT35560 319 tristate "Novatek NT35560 DSI command mode panel" 320 depends on OF 321 depends on DRM_MIPI_DSI 322 depends on BACKLIGHT_CLASS_DEVICE 323 select VIDEOMODE_HELPERS 324 help 325 Say Y here if you want to enable the Novatek NT35560 display 326 controller. This panel supports DSI in both command and video 327 mode. This supports several panels such as Sony ACX424AKM and 328 ACX424AKP. 329 330config DRM_PANEL_NOVATEK_NT35950 331 tristate "Novatek NT35950 DSI panel" 332 depends on OF 333 depends on DRM_MIPI_DSI 334 depends on BACKLIGHT_CLASS_DEVICE 335 help 336 Say Y here if you want to enable support for the panels built 337 around the Novatek NT35950 display controller, such as some 338 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 339 mobile phones. 340 341config DRM_PANEL_NOVATEK_NT36672A 342 tristate "Novatek NT36672A DSI panel" 343 depends on OF 344 depends on DRM_MIPI_DSI 345 depends on BACKLIGHT_CLASS_DEVICE 346 help 347 Say Y here if you want to enable support for the panels built 348 around the Novatek NT36672A display controller, such as some 349 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 350 351config DRM_PANEL_NOVATEK_NT39016 352 tristate "Novatek NT39016 RGB/SPI panel" 353 depends on OF && SPI 354 depends on BACKLIGHT_CLASS_DEVICE 355 select REGMAP_SPI 356 help 357 Say Y here if you want to enable support for the panels built 358 around the Novatek NT39016 display controller. 359 360config DRM_PANEL_MANTIX_MLAF057WE51 361 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 362 depends on OF 363 depends on DRM_MIPI_DSI 364 depends on BACKLIGHT_CLASS_DEVICE 365 help 366 Say Y here if you want to enable support for the Mantix 367 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 368 has a resolution of 720x1440 pixels, a built in backlight and touch 369 controller. 370 371config DRM_PANEL_OLIMEX_LCD_OLINUXINO 372 tristate "Olimex LCD-OLinuXino panel" 373 depends on OF 374 depends on I2C 375 depends on BACKLIGHT_CLASS_DEVICE 376 select CRC32 377 help 378 The panel is used with different sizes LCDs, from 480x272 to 379 1280x800, and 24 bit per pixel. 380 381 Say Y here if you want to enable support for Olimex Ltd. 382 LCD-OLinuXino panel. 383 384config DRM_PANEL_ORISETECH_OTM8009A 385 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 386 depends on OF 387 depends on DRM_MIPI_DSI 388 depends on BACKLIGHT_CLASS_DEVICE 389 help 390 Say Y here if you want to enable support for Orise Technology 391 otm8009a 480x800 dsi 2dl panel. 392 393config DRM_PANEL_OSD_OSD101T2587_53TS 394 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 395 depends on OF 396 depends on DRM_MIPI_DSI 397 depends on BACKLIGHT_CLASS_DEVICE 398 help 399 Say Y here if you want to enable support for One Stop Displays 400 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 401 402config DRM_PANEL_PANASONIC_VVX10F034N00 403 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 404 depends on OF 405 depends on DRM_MIPI_DSI 406 depends on BACKLIGHT_CLASS_DEVICE 407 help 408 Say Y here if you want to enable support for Panasonic VVX10F034N00 409 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 410 Xperia Z2 tablets 411 412config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 413 tristate "Raspberry Pi 7-inch touchscreen panel" 414 depends on DRM_MIPI_DSI 415 help 416 Say Y here if you want to enable support for the Raspberry 417 Pi 7" Touchscreen. To compile this driver as a module, 418 choose M here. 419 420config DRM_PANEL_RAYDIUM_RM67191 421 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 422 depends on OF 423 depends on DRM_MIPI_DSI 424 depends on BACKLIGHT_CLASS_DEVICE 425 help 426 Say Y here if you want to enable support for Raydium RM67191 FHD 427 (1080x1920) DSI panel. 428 429config DRM_PANEL_RAYDIUM_RM68200 430 tristate "Raydium RM68200 720x1280 DSI video mode panel" 431 depends on OF 432 depends on DRM_MIPI_DSI 433 depends on BACKLIGHT_CLASS_DEVICE 434 help 435 Say Y here if you want to enable support for Raydium RM68200 436 720x1280 DSI video mode panel. 437 438config DRM_PANEL_RONBO_RB070D30 439 tristate "Ronbo Electronics RB070D30 panel" 440 depends on OF 441 depends on DRM_MIPI_DSI 442 depends on BACKLIGHT_CLASS_DEVICE 443 help 444 Say Y here if you want to enable support for Ronbo Electronics 445 RB070D30 1024x600 DSI panel. 446 447config DRM_PANEL_SAMSUNG_ATNA33XC20 448 tristate "Samsung ATNA33XC20 eDP panel" 449 depends on OF 450 depends on BACKLIGHT_CLASS_DEVICE 451 depends on PM 452 select DRM_DISPLAY_DP_HELPER 453 select DRM_DISPLAY_HELPER 454 select DRM_DP_AUX_BUS 455 help 456 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 457 be handled by the DRM_PANEL_SIMPLE driver because its power 458 sequencing is non-standard. 459 460config DRM_PANEL_SAMSUNG_DB7430 461 tristate "Samsung DB7430-based DPI panels" 462 depends on OF && SPI && GPIOLIB 463 depends on BACKLIGHT_CLASS_DEVICE 464 select DRM_MIPI_DBI 465 help 466 Say Y here if you want to enable support for the Samsung 467 DB7430 DPI display controller used in such devices as the 468 LMS397KF04 480x800 DPI panel. 469 470config DRM_PANEL_SAMSUNG_S6D16D0 471 tristate "Samsung S6D16D0 DSI video mode panel" 472 depends on OF 473 depends on DRM_MIPI_DSI 474 select VIDEOMODE_HELPERS 475 476config DRM_PANEL_SAMSUNG_S6D27A1 477 tristate "Samsung S6D27A1 DPI panel driver" 478 depends on OF && SPI && GPIOLIB 479 select DRM_MIPI_DBI 480 help 481 Say Y here if you want to enable support for the Samsung 482 S6D27A1 DPI 480x800 panel. 483 484 This panel can be found in Samsung Galaxy Ace 2 485 GT-I8160 mobile phone. 486 487config DRM_PANEL_SAMSUNG_S6E3HA2 488 tristate "Samsung S6E3HA2 DSI video mode panel" 489 depends on OF 490 depends on DRM_MIPI_DSI 491 depends on BACKLIGHT_CLASS_DEVICE 492 select VIDEOMODE_HELPERS 493 494config DRM_PANEL_SAMSUNG_S6E63J0X03 495 tristate "Samsung S6E63J0X03 DSI command mode panel" 496 depends on OF 497 depends on DRM_MIPI_DSI 498 depends on BACKLIGHT_CLASS_DEVICE 499 select VIDEOMODE_HELPERS 500 501config DRM_PANEL_SAMSUNG_S6E63M0 502 tristate "Samsung S6E63M0 RGB panel" 503 depends on OF 504 depends on BACKLIGHT_CLASS_DEVICE 505 help 506 Say Y here if you want to enable support for Samsung S6E63M0 507 AMOLED LCD panel. This panel can be accessed using SPI or 508 DSI. 509 510config DRM_PANEL_SAMSUNG_S6E63M0_SPI 511 tristate "Samsung S6E63M0 RGB SPI interface" 512 depends on SPI 513 depends on DRM_PANEL_SAMSUNG_S6E63M0 514 default DRM_PANEL_SAMSUNG_S6E63M0 515 select DRM_MIPI_DBI 516 help 517 Say Y here if you want to be able to access the Samsung 518 S6E63M0 panel using SPI. 519 520config DRM_PANEL_SAMSUNG_S6E63M0_DSI 521 tristate "Samsung S6E63M0 RGB DSI interface" 522 depends on DRM_MIPI_DSI 523 depends on DRM_PANEL_SAMSUNG_S6E63M0 524 help 525 Say Y here if you want to be able to access the Samsung 526 S6E63M0 panel using DSI. 527 528config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 529 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 530 depends on OF 531 select DRM_MIPI_DSI 532 select VIDEOMODE_HELPERS 533 534config DRM_PANEL_SAMSUNG_S6E8AA0 535 tristate "Samsung S6E8AA0 DSI video mode panel" 536 depends on OF 537 select DRM_MIPI_DSI 538 select VIDEOMODE_HELPERS 539 540config DRM_PANEL_SAMSUNG_SOFEF00 541 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 542 depends on OF 543 depends on DRM_MIPI_DSI 544 depends on BACKLIGHT_CLASS_DEVICE 545 select VIDEOMODE_HELPERS 546 help 547 Say Y or M here if you want to enable support for the Samsung AMOLED 548 command mode panels found in the OnePlus 6/6T smartphones. 549 550 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 551 552config DRM_PANEL_SEIKO_43WVF1G 553 tristate "Seiko 43WVF1G panel" 554 depends on OF 555 depends on BACKLIGHT_CLASS_DEVICE 556 select VIDEOMODE_HELPERS 557 help 558 Say Y here if you want to enable support for the Seiko 559 43WVF1G controller for 800x480 LCD panels 560 561config DRM_PANEL_SHARP_LQ101R1SX01 562 tristate "Sharp LQ101R1SX01 panel" 563 depends on OF 564 depends on DRM_MIPI_DSI 565 depends on BACKLIGHT_CLASS_DEVICE 566 help 567 Say Y here if you want to enable support for Sharp LQ101R1SX01 568 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 569 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 570 the host and has a built-in LED backlight. 571 572 To compile this driver as a module, choose M here: the module 573 will be called panel-sharp-lq101r1sx01. 574 575config DRM_PANEL_SHARP_LS037V7DW01 576 tristate "Sharp LS037V7DW01 VGA LCD panel" 577 depends on GPIOLIB && OF && REGULATOR 578 help 579 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 580 (480x640) LCD panel (found on the TI SDP3430 board). 581 582config DRM_PANEL_SHARP_LS043T1LE01 583 tristate "Sharp LS043T1LE01 qHD video mode panel" 584 depends on OF 585 depends on DRM_MIPI_DSI 586 depends on BACKLIGHT_CLASS_DEVICE 587 help 588 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 589 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 590 591config DRM_PANEL_SHARP_LS060T1SX01 592 tristate "Sharp LS060T1SX01 FullHD video mode panel" 593 depends on OF 594 depends on DRM_MIPI_DSI 595 depends on BACKLIGHT_CLASS_DEVICE 596 help 597 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 598 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 599 Bundle. 600 601config DRM_PANEL_SITRONIX_ST7701 602 tristate "Sitronix ST7701 panel driver" 603 depends on OF 604 depends on DRM_MIPI_DSI 605 depends on BACKLIGHT_CLASS_DEVICE 606 help 607 Say Y here if you want to enable support for the Sitronix 608 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 609 system interfaces. 610 611config DRM_PANEL_SITRONIX_ST7703 612 tristate "Sitronix ST7703 based MIPI touchscreen panels" 613 depends on OF 614 depends on DRM_MIPI_DSI 615 depends on BACKLIGHT_CLASS_DEVICE 616 help 617 Say Y here if you want to enable support for Sitronix ST7703 based 618 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 619 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 620 in backlight and touch controller. 621 Touch input support is provided by the goodix driver and needs to be 622 selected separately. 623 624config DRM_PANEL_SITRONIX_ST7789V 625 tristate "Sitronix ST7789V panel" 626 depends on OF && SPI 627 depends on BACKLIGHT_CLASS_DEVICE 628 help 629 Say Y here if you want to enable support for the Sitronix 630 ST7789V controller for 240x320 LCD panels 631 632config DRM_PANEL_SONY_ACX565AKM 633 tristate "Sony ACX565AKM panel" 634 depends on GPIOLIB && OF && SPI 635 depends on BACKLIGHT_CLASS_DEVICE 636 help 637 Say Y here if you want to enable support for the Sony ACX565AKM 638 800x600 3.5" panel (found on the Nokia N900). 639 640config DRM_PANEL_SONY_TULIP_TRULY_NT35521 641 tristate "Sony Tulip Truly NT35521 panel" 642 depends on GPIOLIB && OF 643 depends on DRM_MIPI_DSI 644 depends on BACKLIGHT_CLASS_DEVICE 645 help 646 Say Y here if you want to enable support for the Sony Tulip 647 NT35521 1280x720 video mode panel as found on Sony Xperia M4 648 Aqua phone. 649 650config DRM_PANEL_TDO_TL070WSH30 651 tristate "TDO TL070WSH30 DSI panel" 652 depends on OF 653 depends on DRM_MIPI_DSI 654 depends on BACKLIGHT_CLASS_DEVICE 655 help 656 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 657 panel module. The panel has a 1024×600 resolution and uses 658 24 bit RGB per pixel. It provides a MIPI DSI interface to 659 the host, a built-in LED backlight and touch controller. 660 661config DRM_PANEL_TPO_TD028TTEC1 662 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 663 depends on OF && SPI 664 depends on BACKLIGHT_CLASS_DEVICE 665 help 666 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 667 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 668 669config DRM_PANEL_TPO_TD043MTEA1 670 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 671 depends on GPIOLIB && OF && REGULATOR && SPI 672 help 673 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 674 4.3" panel (found on the OMAP3 Pandora board). 675 676config DRM_PANEL_TPO_TPG110 677 tristate "TPO TPG 800x400 panel" 678 depends on OF && SPI && GPIOLIB 679 depends on BACKLIGHT_CLASS_DEVICE 680 help 681 Say Y here if you want to enable support for TPO TPG110 682 400CH LTPS TFT LCD Single Chip Digital Driver for up to 683 800x400 LCD panels. 684 685config DRM_PANEL_TRULY_NT35597_WQXGA 686 tristate "Truly WQXGA" 687 depends on OF 688 depends on DRM_MIPI_DSI 689 help 690 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 691 Video Mode panel 692 693config DRM_PANEL_VISIONOX_RM69299 694 tristate "Visionox RM69299" 695 depends on OF 696 depends on DRM_MIPI_DSI 697 help 698 Say Y here if you want to enable support for Visionox 699 RM69299 DSI Video Mode panel. 700 701config DRM_PANEL_WIDECHIPS_WS2401 702 tristate "Widechips WS2401 DPI panel driver" 703 depends on SPI && GPIOLIB 704 depends on BACKLIGHT_CLASS_DEVICE 705 select DRM_MIPI_DBI 706 help 707 Say Y here if you want to enable support for the Widechips WS2401 DPI 708 480x800 display controller used in panels such as Samsung LMS380KF01. 709 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 710 711config DRM_PANEL_XINPENG_XPP055C272 712 tristate "Xinpeng XPP055C272 panel driver" 713 depends on OF 714 depends on DRM_MIPI_DSI 715 depends on BACKLIGHT_CLASS_DEVICE 716 help 717 Say Y here if you want to enable support for the Xinpeng 718 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 719 system interfaces. 720endmenu 721