xref: /linux/drivers/gpu/drm/panel/Kconfig (revision 33b4e4fcd2980ee5fd754731ca9b0325f0344f04) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TD4320
71	tristate "BOE TD4320 DSI panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to enable support for BOE TD4320 1080x2340
77	  video mode panel found in Xiaomi Redmi Note 7 smartphones.
78
79config DRM_PANEL_BOE_TH101MB31UIG002_28A
80	tristate "Boe TH101MB31UIG002-28A panel"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  Say Y here if you want to enable support for Boe
86	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
87	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
88	  interface to the host and has a built-in LED backlight.
89
90config DRM_PANEL_BOE_TV101WUM_NL6
91	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
97	  45NA WUXGA PANEL DSI Video Mode panel
98
99config DRM_PANEL_BOE_TV101WUM_LL2
100	tristate "BOE TV101WUM LL2 1200x1920 panel"
101	depends on OF
102	depends on DRM_MIPI_DSI
103	depends on BACKLIGHT_CLASS_DEVICE
104	help
105	  Say Y here if you want to support for BOE TV101WUM-LL2
106	  WUXGA PANEL DSI Video Mode panel
107
108config DRM_PANEL_EBBG_FT8719
109	tristate "EBBG FT8719 panel driver"
110	depends on OF
111	depends on DRM_MIPI_DSI
112	depends on BACKLIGHT_CLASS_DEVICE
113	help
114	  Say Y here if you want to enable support for the EBBG FT8719
115	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
116	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
117	  interface to the host.
118
119config DRM_PANEL_ELIDA_KD35T133
120	tristate "Elida KD35T133 panel driver"
121	depends on OF
122	depends on DRM_MIPI_DSI
123	depends on BACKLIGHT_CLASS_DEVICE
124	help
125	  Say Y here if you want to enable support for the Elida
126	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
127	  system interfaces.
128
129config DRM_PANEL_FEIXIN_K101_IM2BA02
130	tristate "Feixin K101 IM2BA02 panel"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
136	  4-lane 800x1280 MIPI DSI panel.
137
138config DRM_PANEL_FEIYANG_FY07024DI26A30D
139	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
140	depends on OF
141	depends on DRM_MIPI_DSI
142	depends on BACKLIGHT_CLASS_DEVICE
143	help
144	  Say Y if you want to enable support for panels based on the
145	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
146
147config DRM_PANEL_DSI_CM
148	tristate "Generic DSI command mode panels"
149	depends on OF
150	depends on DRM_MIPI_DSI
151	depends on BACKLIGHT_CLASS_DEVICE
152	help
153	  DRM panel driver for DSI command mode panels with support for
154	  embedded and external backlights.
155
156config DRM_PANEL_LVDS
157	tristate "Generic LVDS panel driver"
158	depends on OF
159	depends on BACKLIGHT_CLASS_DEVICE
160	select VIDEOMODE_HELPERS
161	help
162	  This driver supports LVDS panels that don't require device-specific
163	  handling of power supplies or control signals. It implements automatic
164	  backlight handling if the panel is attached to a backlight controller.
165
166config DRM_PANEL_HIMAX_HX8279
167	tristate "Himax HX8279-based panels"
168	depends on OF
169	depends on DRM_MIPI_DSI
170	depends on BACKLIGHT_CLASS_DEVICE
171	help
172	  Say Y if you want to enable support for panels based on the
173	  Himax HX8279 controller, such as the Startek KD070FHFID078
174	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
175	  and others.
176
177config DRM_PANEL_HIMAX_HX83102
178	tristate "Himax HX83102-based panels"
179	depends on OF
180	depends on DRM_MIPI_DSI
181	depends on BACKLIGHT_CLASS_DEVICE
182	help
183	  Say Y if you want to enable support for panels based on the
184	  Himax HX83102 controller.
185
186config DRM_PANEL_HIMAX_HX83112A
187	tristate "Himax HX83112A-based DSI panel"
188	depends on OF
189	depends on DRM_MIPI_DSI
190	depends on BACKLIGHT_CLASS_DEVICE
191	select DRM_KMS_HELPER
192	help
193	  Say Y here if you want to enable support for Himax HX83112A-based
194	  display panels, such as the one found in the Fairphone 4 smartphone.
195
196config DRM_PANEL_HIMAX_HX8394
197	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
198	depends on OF
199	depends on DRM_MIPI_DSI
200	depends on BACKLIGHT_CLASS_DEVICE
201	help
202	  Say Y if you want to enable support for panels based on the
203	  Himax HX8394 controller, such as the HannStar HSD060BHW4
204	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
205
206	  If M is selected the module will be called panel-himax-hx8394.
207
208config DRM_PANEL_ILITEK_IL9322
209	tristate "Ilitek ILI9322 320x240 QVGA panels"
210	depends on OF && SPI
211	select REGMAP
212	help
213	  Say Y here if you want to enable support for Ilitek IL9322
214	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
215
216config DRM_PANEL_ILITEK_ILI9341
217	tristate "Ilitek ILI9341 240x320 QVGA panels"
218	depends on SPI
219	select DRM_KMS_HELPER
220	select DRM_GEM_DMA_HELPER
221	depends on BACKLIGHT_CLASS_DEVICE
222	select DRM_MIPI_DBI
223	help
224	  Say Y here if you want to enable support for Ilitek IL9341
225	  QVGA (240x320) RGB panels. support serial & parallel rgb
226	  interface.
227
228config DRM_PANEL_ILITEK_ILI9805
229	tristate "Ilitek ILI9805-based panels"
230	depends on OF
231	depends on DRM_MIPI_DSI
232	depends on BACKLIGHT_CLASS_DEVICE
233	help
234	  Say Y if you want to enable support for panels based on the
235	  Ilitek ILI9805 controller.
236
237config DRM_PANEL_ILITEK_ILI9806E
238	tristate "Ilitek ILI9806E-based panels"
239	depends on OF
240	depends on DRM_MIPI_DSI
241	depends on BACKLIGHT_CLASS_DEVICE
242	help
243	  Say Y if you want to enable support for panels based on the
244	  Ilitek ILI9806E controller.
245
246config DRM_PANEL_ILITEK_ILI9881C
247	tristate "Ilitek ILI9881C-based panels"
248	depends on OF
249	depends on DRM_MIPI_DSI
250	depends on BACKLIGHT_CLASS_DEVICE
251	help
252	  Say Y if you want to enable support for panels based on the
253	  Ilitek ILI9881c controller.
254
255config DRM_PANEL_ILITEK_ILI9882T
256	tristate "Ilitek ILI9882t-based panels"
257	depends on OF
258	depends on DRM_MIPI_DSI
259	depends on BACKLIGHT_CLASS_DEVICE
260	help
261	  Say Y if you want to enable support for panels based on the
262	  Ilitek ILI9882t controller.
263
264config DRM_PANEL_INNOLUX_EJ030NA
265        tristate "Innolux EJ030NA 320x480 LCD panel"
266        depends on OF && SPI
267        select REGMAP_SPI
268        help
269          Say Y here to enable support for the Innolux/Chimei EJ030NA
270          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
271          and LDK handheld gaming consoles.
272
273config DRM_PANEL_INNOLUX_P079ZCA
274	tristate "Innolux P079ZCA panel"
275	depends on OF
276	depends on DRM_MIPI_DSI
277	depends on BACKLIGHT_CLASS_DEVICE
278	help
279	  Say Y here if you want to enable support for Innolux P079ZCA
280	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
281	  24 bit RGB per pixel. It provides a MIPI DSI interface to
282	  the host and has a built-in LED backlight.
283
284config DRM_PANEL_JADARD_JD9365DA_H3
285	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
286	depends on OF
287	depends on DRM_MIPI_DSI
288	depends on BACKLIGHT_CLASS_DEVICE
289	help
290	  Say Y here if you want to enable support for Jadard JD9365DA-H3
291	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
292	  800RGBx1280 dots at maximum.
293
294config DRM_PANEL_JDI_LPM102A188A
295	tristate "JDI LPM102A188A DSI panel"
296	depends on OF && GPIOLIB
297	depends on DRM_MIPI_DSI
298	depends on BACKLIGHT_CLASS_DEVICE
299	help
300	  Say Y here if you want to enable support for JDI LPM102A188A DSI
301	  command mode panel as found in Google Pixel C devices.
302	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
303	  to the host.
304
305config DRM_PANEL_JDI_LT070ME05000
306	tristate "JDI LT070ME05000 WUXGA DSI panel"
307	depends on OF
308	depends on DRM_MIPI_DSI
309	depends on BACKLIGHT_CLASS_DEVICE
310	help
311	  Say Y here if you want to enable support for JDI DSI video mode
312	  panel as found in Google Nexus 7 (2013) devices.
313	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
314	  24 bit per pixel.
315
316config DRM_PANEL_JDI_R63452
317	tristate "JDI R63452 Full HD DSI panel"
318	depends on OF
319	depends on DRM_MIPI_DSI
320	depends on BACKLIGHT_CLASS_DEVICE
321	help
322	  Say Y here if you want to enable support for the JDI R63452
323	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
324
325config DRM_PANEL_KHADAS_TS050
326	tristate "Khadas TS050 panel"
327	depends on OF
328	depends on DRM_MIPI_DSI
329	depends on BACKLIGHT_CLASS_DEVICE
330	help
331	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
332	  panel module. The panel has a 1080x1920 resolution and uses
333	  24 bit RGB per pixel. It provides a MIPI DSI interface to
334	  the host, a built-in LED backlight and touch controller.
335
336config DRM_PANEL_KINGDISPLAY_KD097D04
337	tristate "Kingdisplay kd097d04 panel"
338	depends on OF
339	depends on DRM_MIPI_DSI
340	depends on BACKLIGHT_CLASS_DEVICE
341	help
342	  Say Y here if you want to enable support for Kingdisplay kd097d04
343	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
344	  24 bit RGB per pixel. It provides a MIPI DSI interface to
345	  the host and has a built-in LED backlight.
346
347config DRM_PANEL_LEADTEK_LTK050H3146W
348	tristate "Leadtek LTK050H3146W panel"
349	depends on OF
350	depends on DRM_MIPI_DSI
351	depends on BACKLIGHT_CLASS_DEVICE
352	help
353	  Say Y here if you want to enable support for Leadtek LTK050H3146W
354	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
355	  24 bit RGB per pixel. It provides a MIPI DSI interface to
356	  the host and has a built-in LED backlight.
357
358config DRM_PANEL_LEADTEK_LTK500HD1829
359	tristate "Leadtek LTK500HD1829 panel"
360	depends on OF
361	depends on DRM_MIPI_DSI
362	depends on BACKLIGHT_CLASS_DEVICE
363	help
364	  Say Y here if you want to enable support for Kingdisplay kd097d04
365	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
366	  24 bit RGB per pixel. It provides a MIPI DSI interface to
367	  the host and has a built-in LED backlight.
368
369config DRM_PANEL_LINCOLNTECH_LCD197
370	tristate "Lincoln Technologies lcd197 panel"
371	depends on OF
372	depends on DRM_MIPI_DSI
373	depends on BACKLIGHT_CLASS_DEVICE
374	help
375	  Say Y here if you want to enable support for lincolntech lcd197
376	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
377	  24 bit RGB per pixel. It provides a MIPI DSI interface to
378	  the host.
379
380config DRM_PANEL_LG_LB035Q02
381	tristate "LG LB035Q024573 RGB panel"
382	depends on GPIOLIB && OF && SPI
383	help
384	  Say Y here if you want to enable support for the LB035Q02 RGB panel
385	  (found on the Gumstix Overo Palo35 board). To compile this driver as
386	  a module, choose M here.
387
388config DRM_PANEL_LG_LG4573
389	tristate "LG4573 RGB/SPI panel"
390	depends on OF && SPI
391	select VIDEOMODE_HELPERS
392	help
393	  Say Y here if you want to enable support for LG4573 RGB panel.
394	  To compile this driver as a module, choose M here.
395
396config DRM_PANEL_LG_SW43408
397	tristate "LG SW43408 panel"
398	depends on OF
399	depends on DRM_MIPI_DSI
400	depends on BACKLIGHT_CLASS_DEVICE
401	select DRM_DISPLAY_DSC_HELPER
402	select DRM_DISPLAY_HELPER
403	help
404	  Say Y here if you want to enable support for LG sw43408 panel.
405	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
406	  pixel. It provides a MIPI DSI interface to the host and has a
407	  built-in LED backlight.
408
409config DRM_PANEL_MAGNACHIP_D53E6EA8966
410	tristate "Magnachip D53E6EA8966 DSI panel"
411	depends on OF && SPI
412	depends on DRM_MIPI_DSI
413	depends on BACKLIGHT_CLASS_DEVICE
414	select DRM_MIPI_DBI
415	help
416	  DRM panel driver for the Samsung AMS495QA01 panel controlled
417	  with the Magnachip D53E6EA8966 panel IC. This panel receives
418	  video data via DSI but commands via 9-bit SPI using DBI.
419
420config DRM_PANEL_MANTIX_MLAF057WE51
421	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
422	depends on OF
423	depends on DRM_MIPI_DSI
424	depends on BACKLIGHT_CLASS_DEVICE
425	help
426	  Say Y here if you want to enable support for the Mantix
427	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
428	  has a resolution of 720x1440 pixels, a built in backlight and touch
429	  controller.
430
431config DRM_PANEL_NEC_NL8048HL11
432	tristate "NEC NL8048HL11 RGB panel"
433	depends on GPIOLIB && OF && SPI
434	help
435	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
436	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
437	  as a module, choose M here.
438
439config DRM_PANEL_NEWVISION_NV3051D
440	tristate "NewVision NV3051D DSI panel"
441	depends on OF
442	depends on DRM_MIPI_DSI
443	depends on BACKLIGHT_CLASS_DEVICE
444	help
445	  This driver supports the NV3051D based panel found on the Anbernic
446	  RG353P and RG353V.
447
448config DRM_PANEL_NEWVISION_NV3052C
449	tristate "NewVision NV3052C RGB/SPI panel"
450	depends on OF && SPI
451	depends on BACKLIGHT_CLASS_DEVICE
452	select DRM_MIPI_DBI
453	help
454	  Say Y here if you want to enable support for the panels built
455	  around the NewVision NV3052C display controller.
456
457config DRM_PANEL_NOVATEK_NT35510
458	tristate "Novatek NT35510 RGB panel driver"
459	depends on OF
460	depends on DRM_MIPI_DSI
461	depends on BACKLIGHT_CLASS_DEVICE
462	help
463	  Say Y here if you want to enable support for the panels built
464	  around the Novatek NT35510 display controller, such as some
465	  Hydis panels.
466
467config DRM_PANEL_NOVATEK_NT35560
468	tristate "Novatek NT35560 DSI command mode panel"
469	depends on OF
470	depends on DRM_MIPI_DSI
471	depends on BACKLIGHT_CLASS_DEVICE
472	select VIDEOMODE_HELPERS
473	help
474	  Say Y here if you want to enable the Novatek NT35560 display
475	  controller. This panel supports DSI in both command and video
476	  mode. This supports several panels such as Sony ACX424AKM and
477	  ACX424AKP.
478
479config DRM_PANEL_NOVATEK_NT35950
480	tristate "Novatek NT35950 DSI panel"
481	depends on OF
482	depends on DRM_MIPI_DSI
483	depends on BACKLIGHT_CLASS_DEVICE
484	help
485	  Say Y here if you want to enable support for the panels built
486	  around the Novatek NT35950 display controller, such as some
487	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
488	  mobile phones.
489
490config DRM_PANEL_NOVATEK_NT36523
491	tristate "Novatek NT36523 panel driver"
492	depends on OF
493	depends on DRM_MIPI_DSI
494	depends on BACKLIGHT_CLASS_DEVICE
495	help
496	  Say Y here if you want to enable support for the panels built
497	  around the Novatek NT36523 display controller, such as some
498	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
499
500config DRM_PANEL_NOVATEK_NT36672A
501	tristate "Novatek NT36672A DSI panel"
502	depends on OF
503	depends on DRM_MIPI_DSI
504	depends on BACKLIGHT_CLASS_DEVICE
505	help
506	  Say Y here if you want to enable support for the panels built
507	  around the Novatek NT36672A display controller, such as some
508	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
509
510config DRM_PANEL_NOVATEK_NT36672E
511	tristate "Novatek NT36672E DSI panel"
512	depends on OF
513	depends on DRM_MIPI_DSI
514	depends on BACKLIGHT_CLASS_DEVICE
515	help
516	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
517	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
518	  RGB per pixel.
519
520config DRM_PANEL_NOVATEK_NT37801
521	tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
522	depends on OF
523	depends on DRM_MIPI_DSI
524	depends on BACKLIGHT_CLASS_DEVICE
525	select DRM_DISPLAY_DSC_HELPER
526	select DRM_DISPLAY_HELPER
527	help
528	  Say Y here if you want to enable support for Novatek NT37801 (or
529	  NT37810) AMOLED DSI Video Mode LCD panel module with 1440x3200
530	  resolution.
531
532config DRM_PANEL_NOVATEK_NT39016
533	tristate "Novatek NT39016 RGB/SPI panel"
534	depends on OF && SPI
535	depends on BACKLIGHT_CLASS_DEVICE
536	select REGMAP_SPI
537	help
538	  Say Y here if you want to enable support for the panels built
539	  around the Novatek NT39016 display controller.
540
541config DRM_PANEL_OLIMEX_LCD_OLINUXINO
542	tristate "Olimex LCD-OLinuXino panel"
543	depends on OF
544	depends on I2C
545	depends on BACKLIGHT_CLASS_DEVICE
546	select CRC32
547	help
548	  The panel is used with different sizes LCDs, from 480x272 to
549	  1280x800, and 24 bit per pixel.
550
551	  Say Y here if you want to enable support for Olimex Ltd.
552	  LCD-OLinuXino panel.
553
554config DRM_PANEL_ORISETECH_OTA5601A
555        tristate "Orise Technology ota5601a RGB/SPI panel"
556        depends on SPI
557        depends on BACKLIGHT_CLASS_DEVICE
558        select REGMAP_SPI
559        help
560          Say Y here if you want to enable support for the panels built
561          around the Orise Technology OTA9601A display controller.
562
563config DRM_PANEL_ORISETECH_OTM8009A
564	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
565	depends on OF
566	depends on DRM_MIPI_DSI
567	depends on BACKLIGHT_CLASS_DEVICE
568	help
569	  Say Y here if you want to enable support for Orise Technology
570	  otm8009a 480x800 dsi 2dl panel.
571
572config DRM_PANEL_OSD_OSD101T2587_53TS
573	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
574	depends on OF
575	depends on DRM_MIPI_DSI
576	depends on BACKLIGHT_CLASS_DEVICE
577	help
578	  Say Y here if you want to enable support for One Stop Displays
579	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
580
581config DRM_PANEL_PANASONIC_VVX10F034N00
582	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
583	depends on OF
584	depends on DRM_MIPI_DSI
585	depends on BACKLIGHT_CLASS_DEVICE
586	help
587	  Say Y here if you want to enable support for Panasonic VVX10F034N00
588	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
589	  Xperia Z2 tablets
590
591config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
592	tristate "Raspberry Pi 7-inch touchscreen panel"
593	depends on DRM_MIPI_DSI
594	help
595	  Say Y here if you want to enable support for the Raspberry
596	  Pi 7" Touchscreen.  To compile this driver as a module,
597	  choose M here.
598
599config DRM_PANEL_RAYDIUM_RM67191
600	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
601	depends on OF
602	depends on DRM_MIPI_DSI
603	depends on BACKLIGHT_CLASS_DEVICE
604	help
605	  Say Y here if you want to enable support for Raydium RM67191 FHD
606	  (1080x1920) DSI panel.
607
608config DRM_PANEL_RAYDIUM_RM67200
609	tristate "Raydium RM67200-based DSI panel"
610	depends on OF
611	depends on DRM_MIPI_DSI
612	help
613	  Say Y here if you want to enable support for Raydium RM67200-based
614	  DSI video mode panels. This panel controller can be found in the
615	  Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
616	  evaluation boards.
617
618config DRM_PANEL_RAYDIUM_RM68200
619	tristate "Raydium RM68200 720x1280 DSI video mode panel"
620	depends on OF
621	depends on DRM_MIPI_DSI
622	depends on BACKLIGHT_CLASS_DEVICE
623	help
624	  Say Y here if you want to enable support for Raydium RM68200
625	  720x1280 DSI video mode panel.
626
627config DRM_PANEL_RAYDIUM_RM692E5
628	tristate "Raydium RM692E5-based DSI panel"
629	depends on OF
630	depends on DRM_MIPI_DSI
631	depends on BACKLIGHT_CLASS_DEVICE
632	select DRM_DISPLAY_DSC_HELPER
633	select DRM_DISPLAY_HELPER
634	help
635	  Say Y here if you want to enable support for Raydium RM692E5-based
636	  display panels, such as the one found in the Fairphone 5 smartphone.
637
638config DRM_PANEL_RAYDIUM_RM69380
639	tristate "Raydium RM69380-based DSI panel"
640	depends on OF && GPIOLIB
641	depends on DRM_MIPI_DSI
642	depends on BACKLIGHT_CLASS_DEVICE
643	help
644	  Say Y here if you want to enable support for Raydium RM69380-based
645	  display panels.
646
647	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
648	  in combination with an EDO OLED panel.
649
650config DRM_PANEL_RENESAS_R61307
651	tristate "Renesas R61307 DSI video mode panel"
652	depends on OF
653	depends on DRM_MIPI_DSI
654	depends on BACKLIGHT_CLASS_DEVICE
655	help
656	  Say Y here if you want to enable support for KOE tx13d100vm0eaa
657	  IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
658	  resolution and uses 24 bit RGB per pixel.
659
660	  This panel controller can be found in LG Optimus Vu P895 smartphone
661	  in combination with LCD panel.
662
663config DRM_PANEL_RENESAS_R69328
664	tristate "Renesas R69328 720x1280 DSI video mode panel"
665	depends on OF
666	depends on DRM_MIPI_DSI
667	depends on BACKLIGHT_CLASS_DEVICE
668	help
669	  Say Y here if you want to enable support for JDI dx12d100vm0eaa
670	  IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
671	  resolution and uses 24 bit RGB per pixel.
672
673	  This panel controller can be found in LG Optimus 4X P895 smartphone
674	  in combination with LCD panel.
675
676config DRM_PANEL_RONBO_RB070D30
677	tristate "Ronbo Electronics RB070D30 panel"
678	depends on OF
679	depends on DRM_MIPI_DSI
680	depends on BACKLIGHT_CLASS_DEVICE
681	help
682	  Say Y here if you want to enable support for Ronbo Electronics
683	  RB070D30 1024x600 DSI panel.
684
685config DRM_PANEL_SAMSUNG_AMS581VF01
686	tristate "Samsung AMS581VF01 panel"
687	depends on OF
688	depends on DRM_MIPI_DSI
689	depends on BACKLIGHT_CLASS_DEVICE
690	help
691	  Say Y or M here if you want to enable support for the
692	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
693
694config DRM_PANEL_SAMSUNG_AMS639RQ08
695	tristate "Samsung AMS639RQ08 panel"
696	depends on OF
697	depends on DRM_MIPI_DSI
698	depends on BACKLIGHT_CLASS_DEVICE
699	help
700	  Say Y or M here if you want to enable support for the
701	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
702
703config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
704	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
705	depends on GPIOLIB && OF && REGULATOR
706	depends on DRM_MIPI_DSI
707	depends on BACKLIGHT_CLASS_DEVICE
708	help
709	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
710	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
711	  GT-I9195I). To compile this driver as a module, choose M here.
712
713config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
714	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
715	depends on OF
716	select DRM_MIPI_DSI
717	select VIDEOMODE_HELPERS
718
719config DRM_PANEL_SAMSUNG_ATNA33XC20
720	tristate "Samsung ATNA33XC20 eDP panel"
721	depends on OF
722	depends on BACKLIGHT_CLASS_DEVICE
723	depends on PM
724	select DRM_DISPLAY_DP_HELPER
725	select DRM_DISPLAY_HELPER
726	select DRM_DISPLAY_DP_AUX_BUS
727	help
728	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
729	  be handled by the DRM_PANEL_SIMPLE driver because its power
730	  sequencing is non-standard.
731
732config DRM_PANEL_SAMSUNG_DB7430
733	tristate "Samsung DB7430-based DPI panels"
734	depends on OF && SPI && GPIOLIB
735	depends on BACKLIGHT_CLASS_DEVICE
736	select DRM_MIPI_DBI
737	help
738	  Say Y here if you want to enable support for the Samsung
739	  DB7430 DPI display controller used in such devices as the
740	  LMS397KF04 480x800 DPI panel.
741
742config DRM_PANEL_SAMSUNG_LD9040
743	tristate "Samsung LD9040 RGB/SPI panel"
744	depends on OF && SPI
745	depends on BACKLIGHT_CLASS_DEVICE
746	select VIDEOMODE_HELPERS
747
748config DRM_PANEL_SAMSUNG_S6E3FA7
749	tristate "Samsung S6E3FA7 panel driver"
750	depends on OF
751	depends on DRM_MIPI_DSI
752	depends on BACKLIGHT_CLASS_DEVICE
753	help
754	  Say Y here if you want to enable support for the Samsung S6E3FA7
755	  1920x2220 panel.
756
757config DRM_PANEL_SAMSUNG_S6D16D0
758	tristate "Samsung S6D16D0 DSI video mode panel"
759	depends on OF
760	depends on DRM_MIPI_DSI
761	select VIDEOMODE_HELPERS
762
763config DRM_PANEL_SAMSUNG_S6D27A1
764	tristate "Samsung S6D27A1 DPI panel driver"
765	depends on OF && SPI && GPIOLIB
766	select DRM_MIPI_DBI
767	help
768	  Say Y here if you want to enable support for the Samsung
769	  S6D27A1 DPI 480x800 panel.
770
771	  This panel can be found in Samsung Galaxy Ace 2
772	  GT-I8160 mobile phone.
773
774config DRM_PANEL_SAMSUNG_S6D7AA0
775	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
776	depends on OF
777	depends on BACKLIGHT_CLASS_DEVICE
778	select DRM_MIPI_DSI
779	select VIDEOMODE_HELPERS
780
781config DRM_PANEL_SAMSUNG_S6E3HA2
782	tristate "Samsung S6E3HA2 DSI video mode panel"
783	depends on OF
784	depends on DRM_MIPI_DSI
785	depends on BACKLIGHT_CLASS_DEVICE
786	select VIDEOMODE_HELPERS
787
788config DRM_PANEL_SAMSUNG_S6E3HA8
789	tristate "Samsung S6E3HA8 DSI video mode panel"
790	depends on OF
791	depends on DRM_MIPI_DSI
792	depends on BACKLIGHT_CLASS_DEVICE
793	select DRM_DISPLAY_DSC_HELPER
794	select VIDEOMODE_HELPERS
795
796config DRM_PANEL_SAMSUNG_S6E63J0X03
797	tristate "Samsung S6E63J0X03 DSI command mode panel"
798	depends on OF
799	depends on DRM_MIPI_DSI
800	depends on BACKLIGHT_CLASS_DEVICE
801	select VIDEOMODE_HELPERS
802
803config DRM_PANEL_SAMSUNG_S6E63M0
804	tristate "Samsung S6E63M0 RGB panel"
805	depends on OF
806	depends on BACKLIGHT_CLASS_DEVICE
807	help
808	  Say Y here if you want to enable support for Samsung S6E63M0
809	  AMOLED LCD panel. This panel can be accessed using SPI or
810	  DSI.
811
812config DRM_PANEL_SAMSUNG_S6E63M0_SPI
813	tristate "Samsung S6E63M0 RGB SPI interface"
814	depends on SPI
815	depends on DRM_PANEL_SAMSUNG_S6E63M0
816	default DRM_PANEL_SAMSUNG_S6E63M0
817	select DRM_MIPI_DBI
818	help
819	  Say Y here if you want to be able to access the Samsung
820	  S6E63M0 panel using SPI.
821
822config DRM_PANEL_SAMSUNG_S6E63M0_DSI
823	tristate "Samsung S6E63M0 RGB DSI interface"
824	depends on DRM_MIPI_DSI
825	depends on DRM_PANEL_SAMSUNG_S6E63M0
826	help
827	  Say Y here if you want to be able to access the Samsung
828	  S6E63M0 panel using DSI.
829
830config DRM_PANEL_SAMSUNG_S6E8AA0
831	tristate "Samsung S6E8AA0 DSI video mode panel"
832	depends on OF
833	select DRM_MIPI_DSI
834	select VIDEOMODE_HELPERS
835
836config DRM_PANEL_SAMSUNG_SOFEF00
837	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
838	depends on OF
839	depends on DRM_MIPI_DSI
840	depends on BACKLIGHT_CLASS_DEVICE
841	select VIDEOMODE_HELPERS
842	help
843	  Say Y or M here if you want to enable support for the Samsung AMOLED
844	  command mode panels found in the OnePlus 6/6T smartphones.
845
846	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
847
848config DRM_PANEL_SEIKO_43WVF1G
849	tristate "Seiko 43WVF1G panel"
850	depends on OF
851	depends on BACKLIGHT_CLASS_DEVICE
852	select VIDEOMODE_HELPERS
853	help
854	  Say Y here if you want to enable support for the Seiko
855	  43WVF1G controller for 800x480 LCD panels
856
857config DRM_PANEL_SHARP_LQ101R1SX01
858	tristate "Sharp LQ101R1SX01 panel"
859	depends on OF
860	depends on DRM_MIPI_DSI
861	depends on BACKLIGHT_CLASS_DEVICE
862	help
863	  Say Y here if you want to enable support for Sharp LQ101R1SX01
864	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
865	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
866	  the host and has a built-in LED backlight.
867
868	  To compile this driver as a module, choose M here: the module
869	  will be called panel-sharp-lq101r1sx01.
870
871config DRM_PANEL_SHARP_LS037V7DW01
872	tristate "Sharp LS037V7DW01 VGA LCD panel"
873	depends on GPIOLIB && OF && REGULATOR
874	help
875	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
876	  (480x640) LCD panel (found on the TI SDP3430 board).
877
878config DRM_PANEL_SHARP_LS043T1LE01
879	tristate "Sharp LS043T1LE01 qHD video mode panel"
880	depends on OF
881	depends on DRM_MIPI_DSI
882	depends on BACKLIGHT_CLASS_DEVICE
883	help
884	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
885	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
886
887config DRM_PANEL_SHARP_LS060T1SX01
888	tristate "Sharp LS060T1SX01 FullHD video mode panel"
889	depends on OF
890	depends on DRM_MIPI_DSI
891	depends on BACKLIGHT_CLASS_DEVICE
892	help
893	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
894	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
895	  Bundle.
896
897config DRM_PANEL_SITRONIX_ST7701
898	tristate "Sitronix ST7701 panel driver"
899	depends on OF
900	depends on SPI || DRM_MIPI_DSI
901	select DRM_MIPI_DBI if SPI
902	depends on BACKLIGHT_CLASS_DEVICE
903	help
904	  Say Y here if you want to enable support for the Sitronix
905	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
906	  system interfaces.
907
908config DRM_PANEL_SITRONIX_ST7703
909	tristate "Sitronix ST7703 based MIPI touchscreen panels"
910	depends on OF
911	depends on DRM_MIPI_DSI
912	depends on BACKLIGHT_CLASS_DEVICE
913	help
914	  Say Y here if you want to enable support for Sitronix ST7703 based
915	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
916	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
917	  in backlight and touch controller.
918	  Touch input support is provided by the goodix driver and needs to be
919	  selected separately.
920
921config DRM_PANEL_SITRONIX_ST7789V
922	tristate "Sitronix ST7789V panel"
923	depends on OF && SPI
924	depends on BACKLIGHT_CLASS_DEVICE
925	help
926	  Say Y here if you want to enable support for the Sitronix
927	  ST7789V controller for 240x320 LCD panels
928
929config DRM_PANEL_SONY_ACX565AKM
930	tristate "Sony ACX565AKM panel"
931	depends on GPIOLIB && OF && SPI
932	depends on BACKLIGHT_CLASS_DEVICE
933	help
934	  Say Y here if you want to enable support for the Sony ACX565AKM
935	  800x600 3.5" panel (found on the Nokia N900).
936
937config DRM_PANEL_SONY_TD4353_JDI
938	tristate "Sony TD4353 JDI panel"
939	depends on GPIOLIB && OF
940	depends on DRM_MIPI_DSI
941	depends on BACKLIGHT_CLASS_DEVICE
942	help
943	  Say Y here if you want to enable support for the Sony Tama
944	  TD4353 JDI command mode panel as found on some Sony Xperia
945	  XZ2 and XZ2 Compact smartphones.
946
947config DRM_PANEL_SONY_TULIP_TRULY_NT35521
948	tristate "Sony Tulip Truly NT35521 panel"
949	depends on GPIOLIB && OF
950	depends on DRM_MIPI_DSI
951	depends on BACKLIGHT_CLASS_DEVICE
952	help
953	  Say Y here if you want to enable support for the Sony Tulip
954	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
955	  Aqua phone.
956
957config DRM_PANEL_STARTEK_KD070FHFID015
958	tristate "STARTEK KD070FHFID015 panel"
959	depends on OF
960	depends on DRM_MIPI_DSI
961	depends on BACKLIGHT_CLASS_DEVICE
962	help
963	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
964	  based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
965	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
966	  the host, a built-in LED backlight and touch controller.
967
968config DRM_PANEL_EDP
969	tristate "support for simple Embedded DisplayPort panels"
970	depends on OF
971	depends on BACKLIGHT_CLASS_DEVICE
972	depends on PM
973	select VIDEOMODE_HELPERS
974	select DRM_DISPLAY_DP_HELPER
975	select DRM_DISPLAY_HELPER
976	select DRM_DISPLAY_DP_AUX_BUS
977	select DRM_KMS_HELPER
978	help
979	  DRM panel driver for dumb eDP panels that need at most a regulator and
980	  a GPIO to be powered up. Optionally a backlight can be attached so
981	  that it can be automatically turned off when the panel goes into a
982	  low power state.
983
984config DRM_PANEL_SIMPLE
985	tristate "support for simple panels (other than eDP ones)"
986	depends on OF
987	depends on BACKLIGHT_CLASS_DEVICE
988	depends on PM
989	select VIDEOMODE_HELPERS
990	help
991	  DRM panel driver for dumb non-eDP panels that need at most a regulator
992	  and a GPIO to be powered up. Optionally a backlight can be attached so
993	  that it can be automatically turned off when the panel goes into a
994	  low power state.
995
996config DRM_PANEL_SUMMIT
997	tristate "Apple Summit display panel"
998	depends on OF
999	depends on DRM_MIPI_DSI
1000	depends on BACKLIGHT_CLASS_DEVICE
1001	help
1002	  Say Y if you want to enable support for the "Summit" display panel
1003	  used as a touchbar on certain Apple laptops.
1004
1005config DRM_PANEL_SYNAPTICS_R63353
1006	tristate "Synaptics R63353-based panels"
1007	depends on OF
1008	depends on DRM_MIPI_DSI
1009	depends on BACKLIGHT_CLASS_DEVICE
1010	help
1011	  Say Y if you want to enable support for panels based on the
1012	  Synaptics R63353 controller.
1013
1014config DRM_PANEL_TDO_TL070WSH30
1015	tristate "TDO TL070WSH30 DSI panel"
1016	depends on OF
1017	depends on DRM_MIPI_DSI
1018	depends on BACKLIGHT_CLASS_DEVICE
1019	help
1020	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
1021	  panel module. The panel has a 1024×600 resolution and uses
1022	  24 bit RGB per pixel. It provides a MIPI DSI interface to
1023	  the host, a built-in LED backlight and touch controller.
1024
1025config DRM_PANEL_TPO_TD028TTEC1
1026	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
1027	depends on OF && SPI
1028	depends on BACKLIGHT_CLASS_DEVICE
1029	help
1030	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1031	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
1032
1033config DRM_PANEL_TPO_TD043MTEA1
1034	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
1035	depends on GPIOLIB && OF && REGULATOR && SPI
1036	help
1037	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1038	  4.3" panel (found on the OMAP3 Pandora board).
1039
1040config DRM_PANEL_TPO_TPG110
1041	tristate "TPO TPG 800x400 panel"
1042	depends on OF && SPI && GPIOLIB
1043	depends on BACKLIGHT_CLASS_DEVICE
1044	help
1045	  Say Y here if you want to enable support for TPO TPG110
1046	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
1047	  800x400 LCD panels.
1048
1049config DRM_PANEL_TRULY_NT35597_WQXGA
1050	tristate "Truly WQXGA"
1051	depends on OF
1052	depends on DRM_MIPI_DSI
1053	help
1054	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1055	  Video Mode panel
1056
1057config DRM_PANEL_VISIONOX_G2647FB105
1058	tristate "Visionox G2647FB105"
1059	depends on OF
1060	depends on DRM_MIPI_DSI
1061	depends on BACKLIGHT_CLASS_DEVICE
1062	help
1063	  Say Y here if you want to enable support for the Visionox
1064	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1065
1066config DRM_PANEL_VISIONOX_R66451
1067	tristate "Visionox R66451"
1068	depends on OF
1069	depends on DRM_MIPI_DSI
1070	depends on BACKLIGHT_CLASS_DEVICE
1071	select DRM_DISPLAY_DSC_HELPER
1072	select DRM_DISPLAY_HELPER
1073	help
1074	  Say Y here if you want to enable support for Visionox
1075	  R66451 1080x2340 AMOLED DSI panel.
1076
1077config DRM_PANEL_VISIONOX_RM69299
1078	tristate "Visionox RM69299"
1079	depends on OF
1080	depends on DRM_MIPI_DSI
1081	help
1082	  Say Y here if you want to enable support for Visionox
1083	  RM69299  DSI Video Mode panel.
1084
1085config DRM_PANEL_VISIONOX_RM692E5
1086	tristate "Visionox RM692E5"
1087	depends on OF
1088	depends on DRM_MIPI_DSI
1089	depends on BACKLIGHT_CLASS_DEVICE
1090	select DRM_DISPLAY_DSC_HELPER
1091	select DRM_DISPLAY_HELPER
1092	help
1093	  Say Y here if you want to enable support for Visionox RM692E5 amoled
1094	  display panels, such as the one found in the Nothing Phone (1)
1095	  smartphone.
1096
1097config DRM_PANEL_VISIONOX_VTDR6130
1098	tristate "Visionox VTDR6130"
1099	depends on OF
1100	depends on DRM_MIPI_DSI
1101	depends on BACKLIGHT_CLASS_DEVICE
1102	help
1103	  Say Y here if you want to enable support for Visionox
1104	  VTDR6130 1080x2400 AMOLED DSI panel.
1105
1106config DRM_PANEL_WIDECHIPS_WS2401
1107	tristate "Widechips WS2401 DPI panel driver"
1108	depends on SPI && GPIOLIB
1109	depends on BACKLIGHT_CLASS_DEVICE
1110	select DRM_MIPI_DBI
1111	help
1112	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1113	  480x800 display controller used in panels such as Samsung LMS380KF01.
1114	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1115
1116config DRM_PANEL_XINPENG_XPP055C272
1117	tristate "Xinpeng XPP055C272 panel driver"
1118	depends on OF
1119	depends on DRM_MIPI_DSI
1120	depends on BACKLIGHT_CLASS_DEVICE
1121	help
1122	  Say Y here if you want to enable support for the Xinpeng
1123	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1124	  system interfaces.
1125endmenu
1126