1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TH101MB31UIG002_28A 71 tristate "Boe TH101MB31UIG002-28A panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to enable support for Boe 77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280 78 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI 79 interface to the host and has a built-in LED backlight. 80 81config DRM_PANEL_BOE_TV101WUM_NL6 82 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 83 depends on OF 84 depends on DRM_MIPI_DSI 85 depends on BACKLIGHT_CLASS_DEVICE 86 help 87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 88 45NA WUXGA PANEL DSI Video Mode panel 89 90config DRM_PANEL_EBBG_FT8719 91 tristate "EBBG FT8719 panel driver" 92 depends on OF 93 depends on DRM_MIPI_DSI 94 depends on BACKLIGHT_CLASS_DEVICE 95 help 96 Say Y here if you want to enable support for the EBBG FT8719 97 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 98 The panel has a resolution of 1080x2246. It provides a MIPI DSI 99 interface to the host. 100 101config DRM_PANEL_ELIDA_KD35T133 102 tristate "Elida KD35T133 panel driver" 103 depends on OF 104 depends on DRM_MIPI_DSI 105 depends on BACKLIGHT_CLASS_DEVICE 106 help 107 Say Y here if you want to enable support for the Elida 108 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 109 system interfaces. 110 111config DRM_PANEL_FEIXIN_K101_IM2BA02 112 tristate "Feixin K101 IM2BA02 panel" 113 depends on OF 114 depends on DRM_MIPI_DSI 115 depends on BACKLIGHT_CLASS_DEVICE 116 help 117 Say Y here if you want to enable support for the Feixin K101 IM2BA02 118 4-lane 800x1280 MIPI DSI panel. 119 120config DRM_PANEL_FEIYANG_FY07024DI26A30D 121 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 122 depends on OF 123 depends on DRM_MIPI_DSI 124 depends on BACKLIGHT_CLASS_DEVICE 125 help 126 Say Y if you want to enable support for panels based on the 127 Feiyang FY07024DI26A30-D MIPI-DSI interface. 128 129config DRM_PANEL_DSI_CM 130 tristate "Generic DSI command mode panels" 131 depends on OF 132 depends on DRM_MIPI_DSI 133 depends on BACKLIGHT_CLASS_DEVICE 134 help 135 DRM panel driver for DSI command mode panels with support for 136 embedded and external backlights. 137 138config DRM_PANEL_LVDS 139 tristate "Generic LVDS panel driver" 140 depends on OF 141 depends on BACKLIGHT_CLASS_DEVICE 142 select VIDEOMODE_HELPERS 143 help 144 This driver supports LVDS panels that don't require device-specific 145 handling of power supplies or control signals. It implements automatic 146 backlight handling if the panel is attached to a backlight controller. 147 148config DRM_PANEL_HIMAX_HX83112A 149 tristate "Himax HX83112A-based DSI panel" 150 depends on OF 151 depends on DRM_MIPI_DSI 152 depends on BACKLIGHT_CLASS_DEVICE 153 select DRM_KMS_HELPER 154 help 155 Say Y here if you want to enable support for Himax HX83112A-based 156 display panels, such as the one found in the Fairphone 4 smartphone. 157 158config DRM_PANEL_HIMAX_HX8394 159 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 160 depends on OF 161 depends on DRM_MIPI_DSI 162 depends on BACKLIGHT_CLASS_DEVICE 163 help 164 Say Y if you want to enable support for panels based on the 165 Himax HX8394 controller, such as the HannStar HSD060BHW4 166 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 167 168 If M is selected the module will be called panel-himax-hx8394. 169 170config DRM_PANEL_ILITEK_IL9322 171 tristate "Ilitek ILI9322 320x240 QVGA panels" 172 depends on OF && SPI 173 select REGMAP 174 help 175 Say Y here if you want to enable support for Ilitek IL9322 176 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 177 178config DRM_PANEL_ILITEK_ILI9341 179 tristate "Ilitek ILI9341 240x320 QVGA panels" 180 depends on OF && SPI 181 select DRM_KMS_HELPER 182 select DRM_GEM_DMA_HELPER 183 depends on BACKLIGHT_CLASS_DEVICE 184 select DRM_MIPI_DBI 185 help 186 Say Y here if you want to enable support for Ilitek IL9341 187 QVGA (240x320) RGB panels. support serial & parallel rgb 188 interface. 189 190config DRM_PANEL_ILITEK_ILI9805 191 tristate "Ilitek ILI9805-based panels" 192 depends on OF 193 depends on DRM_MIPI_DSI 194 depends on BACKLIGHT_CLASS_DEVICE 195 help 196 Say Y if you want to enable support for panels based on the 197 Ilitek ILI9805 controller. 198 199config DRM_PANEL_ILITEK_ILI9881C 200 tristate "Ilitek ILI9881C-based panels" 201 depends on OF 202 depends on DRM_MIPI_DSI 203 depends on BACKLIGHT_CLASS_DEVICE 204 help 205 Say Y if you want to enable support for panels based on the 206 Ilitek ILI9881c controller. 207 208config DRM_PANEL_ILITEK_ILI9882T 209 tristate "Ilitek ILI9882t-based panels" 210 depends on OF 211 depends on DRM_MIPI_DSI 212 depends on BACKLIGHT_CLASS_DEVICE 213 help 214 Say Y if you want to enable support for panels based on the 215 Ilitek ILI9882t controller. 216 217config DRM_PANEL_INNOLUX_EJ030NA 218 tristate "Innolux EJ030NA 320x480 LCD panel" 219 depends on OF && SPI 220 select REGMAP_SPI 221 help 222 Say Y here to enable support for the Innolux/Chimei EJ030NA 223 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 224 and LDK handheld gaming consoles. 225 226config DRM_PANEL_INNOLUX_P079ZCA 227 tristate "Innolux P079ZCA panel" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y here if you want to enable support for Innolux P079ZCA 233 TFT-LCD modules. The panel has a 1024x768 resolution and uses 234 24 bit RGB per pixel. It provides a MIPI DSI interface to 235 the host and has a built-in LED backlight. 236 237config DRM_PANEL_JADARD_JD9365DA_H3 238 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 239 depends on OF 240 depends on DRM_MIPI_DSI 241 depends on BACKLIGHT_CLASS_DEVICE 242 help 243 Say Y here if you want to enable support for Jadard JD9365DA-H3 244 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 245 800RGBx1280 dots at maximum. 246 247config DRM_PANEL_JDI_LPM102A188A 248 tristate "JDI LPM102A188A DSI panel" 249 depends on OF && GPIOLIB 250 depends on DRM_MIPI_DSI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for JDI LPM102A188A DSI 254 command mode panel as found in Google Pixel C devices. 255 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface 256 to the host. 257 258config DRM_PANEL_JDI_LT070ME05000 259 tristate "JDI LT070ME05000 WUXGA DSI panel" 260 depends on OF 261 depends on DRM_MIPI_DSI 262 depends on BACKLIGHT_CLASS_DEVICE 263 help 264 Say Y here if you want to enable support for JDI DSI video mode 265 panel as found in Google Nexus 7 (2013) devices. 266 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 267 24 bit per pixel. 268 269config DRM_PANEL_JDI_R63452 270 tristate "JDI R63452 Full HD DSI panel" 271 depends on OF 272 depends on DRM_MIPI_DSI 273 depends on BACKLIGHT_CLASS_DEVICE 274 help 275 Say Y here if you want to enable support for the JDI R63452 276 DSI command mode panel as found in Xiaomi Mi 5 Devices. 277 278config DRM_PANEL_KHADAS_TS050 279 tristate "Khadas TS050 panel" 280 depends on OF 281 depends on DRM_MIPI_DSI 282 depends on BACKLIGHT_CLASS_DEVICE 283 help 284 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 285 panel module. The panel has a 1080x1920 resolution and uses 286 24 bit RGB per pixel. It provides a MIPI DSI interface to 287 the host, a built-in LED backlight and touch controller. 288 289config DRM_PANEL_KINGDISPLAY_KD097D04 290 tristate "Kingdisplay kd097d04 panel" 291 depends on OF 292 depends on DRM_MIPI_DSI 293 depends on BACKLIGHT_CLASS_DEVICE 294 help 295 Say Y here if you want to enable support for Kingdisplay kd097d04 296 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 297 24 bit RGB per pixel. It provides a MIPI DSI interface to 298 the host and has a built-in LED backlight. 299 300config DRM_PANEL_LEADTEK_LTK050H3146W 301 tristate "Leadtek LTK050H3146W panel" 302 depends on OF 303 depends on DRM_MIPI_DSI 304 depends on BACKLIGHT_CLASS_DEVICE 305 help 306 Say Y here if you want to enable support for Leadtek LTK050H3146W 307 TFT-LCD modules. The panel has a 720x1280 resolution and uses 308 24 bit RGB per pixel. It provides a MIPI DSI interface to 309 the host and has a built-in LED backlight. 310 311config DRM_PANEL_LEADTEK_LTK500HD1829 312 tristate "Leadtek LTK500HD1829 panel" 313 depends on OF 314 depends on DRM_MIPI_DSI 315 depends on BACKLIGHT_CLASS_DEVICE 316 help 317 Say Y here if you want to enable support for Kingdisplay kd097d04 318 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 319 24 bit RGB per pixel. It provides a MIPI DSI interface to 320 the host and has a built-in LED backlight. 321 322config DRM_PANEL_LG_LB035Q02 323 tristate "LG LB035Q024573 RGB panel" 324 depends on GPIOLIB && OF && SPI 325 help 326 Say Y here if you want to enable support for the LB035Q02 RGB panel 327 (found on the Gumstix Overo Palo35 board). To compile this driver as 328 a module, choose M here. 329 330config DRM_PANEL_LG_LG4573 331 tristate "LG4573 RGB/SPI panel" 332 depends on OF && SPI 333 select VIDEOMODE_HELPERS 334 help 335 Say Y here if you want to enable support for LG4573 RGB panel. 336 To compile this driver as a module, choose M here. 337 338config DRM_PANEL_LG_SW43408 339 tristate "LG SW43408 panel" 340 depends on OF 341 depends on DRM_MIPI_DSI 342 depends on BACKLIGHT_CLASS_DEVICE 343 help 344 Say Y here if you want to enable support for LG sw43408 panel. 345 The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per 346 pixel. It provides a MIPI DSI interface to the host and has a 347 built-in LED backlight. 348 349config DRM_PANEL_MAGNACHIP_D53E6EA8966 350 tristate "Magnachip D53E6EA8966 DSI panel" 351 depends on OF && SPI 352 depends on DRM_MIPI_DSI 353 depends on BACKLIGHT_CLASS_DEVICE 354 select DRM_MIPI_DBI 355 help 356 DRM panel driver for the Samsung AMS495QA01 panel controlled 357 with the Magnachip D53E6EA8966 panel IC. This panel receives 358 video data via DSI but commands via 9-bit SPI using DBI. 359 360config DRM_PANEL_MANTIX_MLAF057WE51 361 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 362 depends on OF 363 depends on DRM_MIPI_DSI 364 depends on BACKLIGHT_CLASS_DEVICE 365 help 366 Say Y here if you want to enable support for the Mantix 367 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 368 has a resolution of 720x1440 pixels, a built in backlight and touch 369 controller. 370 371config DRM_PANEL_NEC_NL8048HL11 372 tristate "NEC NL8048HL11 RGB panel" 373 depends on GPIOLIB && OF && SPI 374 help 375 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 376 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 377 as a module, choose M here. 378 379config DRM_PANEL_NEWVISION_NV3051D 380 tristate "NewVision NV3051D DSI panel" 381 depends on OF 382 depends on DRM_MIPI_DSI 383 depends on BACKLIGHT_CLASS_DEVICE 384 help 385 This driver supports the NV3051D based panel found on the Anbernic 386 RG353P and RG353V. 387 388config DRM_PANEL_NEWVISION_NV3052C 389 tristate "NewVision NV3052C RGB/SPI panel" 390 depends on OF && SPI 391 depends on BACKLIGHT_CLASS_DEVICE 392 select DRM_MIPI_DBI 393 help 394 Say Y here if you want to enable support for the panels built 395 around the NewVision NV3052C display controller. 396 397config DRM_PANEL_NOVATEK_NT35510 398 tristate "Novatek NT35510 RGB panel driver" 399 depends on OF 400 depends on DRM_MIPI_DSI 401 depends on BACKLIGHT_CLASS_DEVICE 402 help 403 Say Y here if you want to enable support for the panels built 404 around the Novatek NT35510 display controller, such as some 405 Hydis panels. 406 407config DRM_PANEL_NOVATEK_NT35560 408 tristate "Novatek NT35560 DSI command mode panel" 409 depends on OF 410 depends on DRM_MIPI_DSI 411 depends on BACKLIGHT_CLASS_DEVICE 412 select VIDEOMODE_HELPERS 413 help 414 Say Y here if you want to enable the Novatek NT35560 display 415 controller. This panel supports DSI in both command and video 416 mode. This supports several panels such as Sony ACX424AKM and 417 ACX424AKP. 418 419config DRM_PANEL_NOVATEK_NT35950 420 tristate "Novatek NT35950 DSI panel" 421 depends on OF 422 depends on DRM_MIPI_DSI 423 depends on BACKLIGHT_CLASS_DEVICE 424 help 425 Say Y here if you want to enable support for the panels built 426 around the Novatek NT35950 display controller, such as some 427 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 428 mobile phones. 429 430config DRM_PANEL_NOVATEK_NT36523 431 tristate "Novatek NT36523 panel driver" 432 depends on OF 433 depends on DRM_MIPI_DSI 434 depends on BACKLIGHT_CLASS_DEVICE 435 help 436 Say Y here if you want to enable support for the panels built 437 around the Novatek NT36523 display controller, such as some 438 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. 439 440config DRM_PANEL_NOVATEK_NT36672A 441 tristate "Novatek NT36672A DSI panel" 442 depends on OF 443 depends on DRM_MIPI_DSI 444 depends on BACKLIGHT_CLASS_DEVICE 445 help 446 Say Y here if you want to enable support for the panels built 447 around the Novatek NT36672A display controller, such as some 448 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 449 450config DRM_PANEL_NOVATEK_NT36672E 451 tristate "Novatek NT36672E DSI panel" 452 depends on OF 453 depends on DRM_MIPI_DSI 454 depends on BACKLIGHT_CLASS_DEVICE 455 help 456 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode 457 LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit 458 RGB per pixel. 459 460config DRM_PANEL_NOVATEK_NT39016 461 tristate "Novatek NT39016 RGB/SPI panel" 462 depends on OF && SPI 463 depends on BACKLIGHT_CLASS_DEVICE 464 select REGMAP_SPI 465 help 466 Say Y here if you want to enable support for the panels built 467 around the Novatek NT39016 display controller. 468 469config DRM_PANEL_OLIMEX_LCD_OLINUXINO 470 tristate "Olimex LCD-OLinuXino panel" 471 depends on OF 472 depends on I2C 473 depends on BACKLIGHT_CLASS_DEVICE 474 select CRC32 475 help 476 The panel is used with different sizes LCDs, from 480x272 to 477 1280x800, and 24 bit per pixel. 478 479 Say Y here if you want to enable support for Olimex Ltd. 480 LCD-OLinuXino panel. 481 482config DRM_PANEL_ORISETECH_OTA5601A 483 tristate "Orise Technology ota5601a RGB/SPI panel" 484 depends on SPI 485 depends on BACKLIGHT_CLASS_DEVICE 486 select REGMAP_SPI 487 help 488 Say Y here if you want to enable support for the panels built 489 around the Orise Technology OTA9601A display controller. 490 491config DRM_PANEL_ORISETECH_OTM8009A 492 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 493 depends on OF 494 depends on DRM_MIPI_DSI 495 depends on BACKLIGHT_CLASS_DEVICE 496 help 497 Say Y here if you want to enable support for Orise Technology 498 otm8009a 480x800 dsi 2dl panel. 499 500config DRM_PANEL_OSD_OSD101T2587_53TS 501 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 502 depends on OF 503 depends on DRM_MIPI_DSI 504 depends on BACKLIGHT_CLASS_DEVICE 505 help 506 Say Y here if you want to enable support for One Stop Displays 507 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 508 509config DRM_PANEL_PANASONIC_VVX10F034N00 510 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 511 depends on OF 512 depends on DRM_MIPI_DSI 513 depends on BACKLIGHT_CLASS_DEVICE 514 help 515 Say Y here if you want to enable support for Panasonic VVX10F034N00 516 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 517 Xperia Z2 tablets 518 519config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 520 tristate "Raspberry Pi 7-inch touchscreen panel" 521 depends on DRM_MIPI_DSI 522 help 523 Say Y here if you want to enable support for the Raspberry 524 Pi 7" Touchscreen. To compile this driver as a module, 525 choose M here. 526 527config DRM_PANEL_RAYDIUM_RM67191 528 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 529 depends on OF 530 depends on DRM_MIPI_DSI 531 depends on BACKLIGHT_CLASS_DEVICE 532 help 533 Say Y here if you want to enable support for Raydium RM67191 FHD 534 (1080x1920) DSI panel. 535 536config DRM_PANEL_RAYDIUM_RM68200 537 tristate "Raydium RM68200 720x1280 DSI video mode panel" 538 depends on OF 539 depends on DRM_MIPI_DSI 540 depends on BACKLIGHT_CLASS_DEVICE 541 help 542 Say Y here if you want to enable support for Raydium RM68200 543 720x1280 DSI video mode panel. 544 545config DRM_PANEL_RAYDIUM_RM692E5 546 tristate "Raydium RM692E5-based DSI panel" 547 depends on BACKLIGHT_CLASS_DEVICE 548 depends on DRM_DISPLAY_DP_HELPER 549 depends on DRM_DISPLAY_HELPER 550 depends on DRM_MIPI_DSI 551 depends on OF 552 help 553 Say Y here if you want to enable support for Raydium RM692E5-based 554 display panels, such as the one found in the Fairphone 5 smartphone. 555 556config DRM_PANEL_RONBO_RB070D30 557 tristate "Ronbo Electronics RB070D30 panel" 558 depends on OF 559 depends on DRM_MIPI_DSI 560 depends on BACKLIGHT_CLASS_DEVICE 561 help 562 Say Y here if you want to enable support for Ronbo Electronics 563 RB070D30 1024x600 DSI panel. 564 565config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 566 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 567 depends on OF 568 select DRM_MIPI_DSI 569 select VIDEOMODE_HELPERS 570 571config DRM_PANEL_SAMSUNG_ATNA33XC20 572 tristate "Samsung ATNA33XC20 eDP panel" 573 depends on BACKLIGHT_CLASS_DEVICE 574 depends on DRM_DISPLAY_DP_AUX_BUS 575 depends on DRM_DISPLAY_DP_HELPER 576 depends on DRM_DISPLAY_HELPER 577 depends on OF 578 depends on PM 579 help 580 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 581 be handled by the DRM_PANEL_SIMPLE driver because its power 582 sequencing is non-standard. 583 584config DRM_PANEL_SAMSUNG_DB7430 585 tristate "Samsung DB7430-based DPI panels" 586 depends on OF && SPI && GPIOLIB 587 depends on BACKLIGHT_CLASS_DEVICE 588 select DRM_MIPI_DBI 589 help 590 Say Y here if you want to enable support for the Samsung 591 DB7430 DPI display controller used in such devices as the 592 LMS397KF04 480x800 DPI panel. 593 594config DRM_PANEL_SAMSUNG_LD9040 595 tristate "Samsung LD9040 RGB/SPI panel" 596 depends on OF && SPI 597 depends on BACKLIGHT_CLASS_DEVICE 598 select VIDEOMODE_HELPERS 599 600config DRM_PANEL_SAMSUNG_S6E3FA7 601 tristate "Samsung S6E3FA7 panel driver" 602 depends on OF 603 depends on DRM_MIPI_DSI 604 depends on BACKLIGHT_CLASS_DEVICE 605 help 606 Say Y here if you want to enable support for the Samsung S6E3FA7 607 1920x2220 panel. 608 609config DRM_PANEL_SAMSUNG_S6D16D0 610 tristate "Samsung S6D16D0 DSI video mode panel" 611 depends on OF 612 depends on DRM_MIPI_DSI 613 select VIDEOMODE_HELPERS 614 615config DRM_PANEL_SAMSUNG_S6D27A1 616 tristate "Samsung S6D27A1 DPI panel driver" 617 depends on OF && SPI && GPIOLIB 618 select DRM_MIPI_DBI 619 help 620 Say Y here if you want to enable support for the Samsung 621 S6D27A1 DPI 480x800 panel. 622 623 This panel can be found in Samsung Galaxy Ace 2 624 GT-I8160 mobile phone. 625 626config DRM_PANEL_SAMSUNG_S6D7AA0 627 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller" 628 depends on OF 629 depends on BACKLIGHT_CLASS_DEVICE 630 select DRM_MIPI_DSI 631 select VIDEOMODE_HELPERS 632 633config DRM_PANEL_SAMSUNG_S6E3HA2 634 tristate "Samsung S6E3HA2 DSI video mode panel" 635 depends on OF 636 depends on DRM_MIPI_DSI 637 depends on BACKLIGHT_CLASS_DEVICE 638 select VIDEOMODE_HELPERS 639 640config DRM_PANEL_SAMSUNG_S6E63J0X03 641 tristate "Samsung S6E63J0X03 DSI command mode panel" 642 depends on OF 643 depends on DRM_MIPI_DSI 644 depends on BACKLIGHT_CLASS_DEVICE 645 select VIDEOMODE_HELPERS 646 647config DRM_PANEL_SAMSUNG_S6E63M0 648 tristate "Samsung S6E63M0 RGB panel" 649 depends on OF 650 depends on BACKLIGHT_CLASS_DEVICE 651 help 652 Say Y here if you want to enable support for Samsung S6E63M0 653 AMOLED LCD panel. This panel can be accessed using SPI or 654 DSI. 655 656config DRM_PANEL_SAMSUNG_S6E63M0_SPI 657 tristate "Samsung S6E63M0 RGB SPI interface" 658 depends on SPI 659 depends on DRM_PANEL_SAMSUNG_S6E63M0 660 default DRM_PANEL_SAMSUNG_S6E63M0 661 select DRM_MIPI_DBI 662 help 663 Say Y here if you want to be able to access the Samsung 664 S6E63M0 panel using SPI. 665 666config DRM_PANEL_SAMSUNG_S6E63M0_DSI 667 tristate "Samsung S6E63M0 RGB DSI interface" 668 depends on DRM_MIPI_DSI 669 depends on DRM_PANEL_SAMSUNG_S6E63M0 670 help 671 Say Y here if you want to be able to access the Samsung 672 S6E63M0 panel using DSI. 673 674config DRM_PANEL_SAMSUNG_S6E8AA0 675 tristate "Samsung S6E8AA0 DSI video mode panel" 676 depends on OF 677 select DRM_MIPI_DSI 678 select VIDEOMODE_HELPERS 679 680config DRM_PANEL_SAMSUNG_SOFEF00 681 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 682 depends on OF 683 depends on DRM_MIPI_DSI 684 depends on BACKLIGHT_CLASS_DEVICE 685 select VIDEOMODE_HELPERS 686 help 687 Say Y or M here if you want to enable support for the Samsung AMOLED 688 command mode panels found in the OnePlus 6/6T smartphones. 689 690 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 691 692config DRM_PANEL_SEIKO_43WVF1G 693 tristate "Seiko 43WVF1G panel" 694 depends on OF 695 depends on BACKLIGHT_CLASS_DEVICE 696 select VIDEOMODE_HELPERS 697 help 698 Say Y here if you want to enable support for the Seiko 699 43WVF1G controller for 800x480 LCD panels 700 701config DRM_PANEL_SHARP_LQ101R1SX01 702 tristate "Sharp LQ101R1SX01 panel" 703 depends on OF 704 depends on DRM_MIPI_DSI 705 depends on BACKLIGHT_CLASS_DEVICE 706 help 707 Say Y here if you want to enable support for Sharp LQ101R1SX01 708 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 709 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 710 the host and has a built-in LED backlight. 711 712 To compile this driver as a module, choose M here: the module 713 will be called panel-sharp-lq101r1sx01. 714 715config DRM_PANEL_SHARP_LS037V7DW01 716 tristate "Sharp LS037V7DW01 VGA LCD panel" 717 depends on GPIOLIB && OF && REGULATOR 718 help 719 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 720 (480x640) LCD panel (found on the TI SDP3430 board). 721 722config DRM_PANEL_SHARP_LS043T1LE01 723 tristate "Sharp LS043T1LE01 qHD video mode panel" 724 depends on OF 725 depends on DRM_MIPI_DSI 726 depends on BACKLIGHT_CLASS_DEVICE 727 help 728 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 729 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 730 731config DRM_PANEL_SHARP_LS060T1SX01 732 tristate "Sharp LS060T1SX01 FullHD video mode panel" 733 depends on OF 734 depends on DRM_MIPI_DSI 735 depends on BACKLIGHT_CLASS_DEVICE 736 help 737 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 738 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 739 Bundle. 740 741config DRM_PANEL_SITRONIX_ST7701 742 tristate "Sitronix ST7701 panel driver" 743 depends on OF 744 depends on DRM_MIPI_DSI 745 depends on BACKLIGHT_CLASS_DEVICE 746 help 747 Say Y here if you want to enable support for the Sitronix 748 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 749 system interfaces. 750 751config DRM_PANEL_SITRONIX_ST7703 752 tristate "Sitronix ST7703 based MIPI touchscreen panels" 753 depends on OF 754 depends on DRM_MIPI_DSI 755 depends on BACKLIGHT_CLASS_DEVICE 756 help 757 Say Y here if you want to enable support for Sitronix ST7703 based 758 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 759 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 760 in backlight and touch controller. 761 Touch input support is provided by the goodix driver and needs to be 762 selected separately. 763 764config DRM_PANEL_SITRONIX_ST7789V 765 tristate "Sitronix ST7789V panel" 766 depends on OF && SPI 767 depends on BACKLIGHT_CLASS_DEVICE 768 help 769 Say Y here if you want to enable support for the Sitronix 770 ST7789V controller for 240x320 LCD panels 771 772config DRM_PANEL_SONY_ACX565AKM 773 tristate "Sony ACX565AKM panel" 774 depends on GPIOLIB && OF && SPI 775 depends on BACKLIGHT_CLASS_DEVICE 776 help 777 Say Y here if you want to enable support for the Sony ACX565AKM 778 800x600 3.5" panel (found on the Nokia N900). 779 780config DRM_PANEL_SONY_TD4353_JDI 781 tristate "Sony TD4353 JDI panel" 782 depends on GPIOLIB && OF 783 depends on DRM_MIPI_DSI 784 depends on BACKLIGHT_CLASS_DEVICE 785 help 786 Say Y here if you want to enable support for the Sony Tama 787 TD4353 JDI command mode panel as found on some Sony Xperia 788 XZ2 and XZ2 Compact smartphones. 789 790config DRM_PANEL_SONY_TULIP_TRULY_NT35521 791 tristate "Sony Tulip Truly NT35521 panel" 792 depends on GPIOLIB && OF 793 depends on DRM_MIPI_DSI 794 depends on BACKLIGHT_CLASS_DEVICE 795 help 796 Say Y here if you want to enable support for the Sony Tulip 797 NT35521 1280x720 video mode panel as found on Sony Xperia M4 798 Aqua phone. 799 800config DRM_PANEL_STARTEK_KD070FHFID015 801 tristate "STARTEK KD070FHFID015 panel" 802 depends on OF 803 depends on DRM_MIPI_DSI 804 depends on BACKLIGHT_CLASS_DEVICE 805 help 806 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel 807 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display 808 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to 809 the host, a built-in LED backlight and touch controller. 810 811config DRM_PANEL_EDP 812 tristate "support for simple Embedded DisplayPort panels" 813 depends on BACKLIGHT_CLASS_DEVICE 814 depends on DRM_DISPLAY_DP_AUX_BUS 815 depends on DRM_DISPLAY_DP_HELPER 816 depends on DRM_DISPLAY_HELPER 817 depends on OF 818 depends on PM 819 select VIDEOMODE_HELPERS 820 select DRM_KMS_HELPER 821 help 822 DRM panel driver for dumb eDP panels that need at most a regulator and 823 a GPIO to be powered up. Optionally a backlight can be attached so 824 that it can be automatically turned off when the panel goes into a 825 low power state. 826 827config DRM_PANEL_SIMPLE 828 tristate "support for simple panels (other than eDP ones)" 829 depends on OF 830 depends on BACKLIGHT_CLASS_DEVICE 831 depends on PM 832 select VIDEOMODE_HELPERS 833 help 834 DRM panel driver for dumb non-eDP panels that need at most a regulator 835 and a GPIO to be powered up. Optionally a backlight can be attached so 836 that it can be automatically turned off when the panel goes into a 837 low power state. 838 839config DRM_PANEL_SYNAPTICS_R63353 840 tristate "Synaptics R63353-based panels" 841 depends on OF 842 depends on DRM_MIPI_DSI 843 depends on BACKLIGHT_CLASS_DEVICE 844 help 845 Say Y if you want to enable support for panels based on the 846 Synaptics R63353 controller. 847 848config DRM_PANEL_TDO_TL070WSH30 849 tristate "TDO TL070WSH30 DSI panel" 850 depends on OF 851 depends on DRM_MIPI_DSI 852 depends on BACKLIGHT_CLASS_DEVICE 853 help 854 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 855 panel module. The panel has a 1024×600 resolution and uses 856 24 bit RGB per pixel. It provides a MIPI DSI interface to 857 the host, a built-in LED backlight and touch controller. 858 859config DRM_PANEL_TPO_TD028TTEC1 860 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 861 depends on OF && SPI 862 depends on BACKLIGHT_CLASS_DEVICE 863 help 864 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 865 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 866 867config DRM_PANEL_TPO_TD043MTEA1 868 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 869 depends on GPIOLIB && OF && REGULATOR && SPI 870 help 871 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 872 4.3" panel (found on the OMAP3 Pandora board). 873 874config DRM_PANEL_TPO_TPG110 875 tristate "TPO TPG 800x400 panel" 876 depends on OF && SPI && GPIOLIB 877 depends on BACKLIGHT_CLASS_DEVICE 878 help 879 Say Y here if you want to enable support for TPO TPG110 880 400CH LTPS TFT LCD Single Chip Digital Driver for up to 881 800x400 LCD panels. 882 883config DRM_PANEL_TRULY_NT35597_WQXGA 884 tristate "Truly WQXGA" 885 depends on OF 886 depends on DRM_MIPI_DSI 887 help 888 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 889 Video Mode panel 890 891config DRM_PANEL_VISIONOX_R66451 892 tristate "Visionox R66451" 893 depends on BACKLIGHT_CLASS_DEVICE 894 depends on DRM_DISPLAY_DP_HELPER 895 depends on DRM_DISPLAY_HELPER 896 depends on DRM_MIPI_DSI 897 depends on OF 898 help 899 Say Y here if you want to enable support for Visionox 900 R66451 1080x2340 AMOLED DSI panel. 901 902config DRM_PANEL_VISIONOX_RM69299 903 tristate "Visionox RM69299" 904 depends on OF 905 depends on DRM_MIPI_DSI 906 help 907 Say Y here if you want to enable support for Visionox 908 RM69299 DSI Video Mode panel. 909 910config DRM_PANEL_VISIONOX_VTDR6130 911 tristate "Visionox VTDR6130" 912 depends on OF 913 depends on DRM_MIPI_DSI 914 depends on BACKLIGHT_CLASS_DEVICE 915 help 916 Say Y here if you want to enable support for Visionox 917 VTDR6130 1080x2400 AMOLED DSI panel. 918 919config DRM_PANEL_WIDECHIPS_WS2401 920 tristate "Widechips WS2401 DPI panel driver" 921 depends on SPI && GPIOLIB 922 depends on BACKLIGHT_CLASS_DEVICE 923 select DRM_MIPI_DBI 924 help 925 Say Y here if you want to enable support for the Widechips WS2401 DPI 926 480x800 display controller used in panels such as Samsung LMS380KF01. 927 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 928 929config DRM_PANEL_XINPENG_XPP055C272 930 tristate "Xinpeng XPP055C272 panel driver" 931 depends on OF 932 depends on DRM_MIPI_DSI 933 depends on BACKLIGHT_CLASS_DEVICE 934 help 935 Say Y here if you want to enable support for the Xinpeng 936 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 937 system interfaces. 938endmenu 939