1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TH101MB31UIG002_28A 71 tristate "Boe TH101MB31UIG002-28A panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to enable support for Boe 77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280 78 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI 79 interface to the host and has a built-in LED backlight. 80 81config DRM_PANEL_BOE_TV101WUM_NL6 82 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 83 depends on OF 84 depends on DRM_MIPI_DSI 85 depends on BACKLIGHT_CLASS_DEVICE 86 help 87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 88 45NA WUXGA PANEL DSI Video Mode panel 89 90config DRM_PANEL_EBBG_FT8719 91 tristate "EBBG FT8719 panel driver" 92 depends on OF 93 depends on DRM_MIPI_DSI 94 depends on BACKLIGHT_CLASS_DEVICE 95 help 96 Say Y here if you want to enable support for the EBBG FT8719 97 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 98 The panel has a resolution of 1080x2246. It provides a MIPI DSI 99 interface to the host. 100 101config DRM_PANEL_ELIDA_KD35T133 102 tristate "Elida KD35T133 panel driver" 103 depends on OF 104 depends on DRM_MIPI_DSI 105 depends on BACKLIGHT_CLASS_DEVICE 106 help 107 Say Y here if you want to enable support for the Elida 108 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 109 system interfaces. 110 111config DRM_PANEL_FEIXIN_K101_IM2BA02 112 tristate "Feixin K101 IM2BA02 panel" 113 depends on OF 114 depends on DRM_MIPI_DSI 115 depends on BACKLIGHT_CLASS_DEVICE 116 help 117 Say Y here if you want to enable support for the Feixin K101 IM2BA02 118 4-lane 800x1280 MIPI DSI panel. 119 120config DRM_PANEL_FEIYANG_FY07024DI26A30D 121 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 122 depends on OF 123 depends on DRM_MIPI_DSI 124 depends on BACKLIGHT_CLASS_DEVICE 125 help 126 Say Y if you want to enable support for panels based on the 127 Feiyang FY07024DI26A30-D MIPI-DSI interface. 128 129config DRM_PANEL_DSI_CM 130 tristate "Generic DSI command mode panels" 131 depends on OF 132 depends on DRM_MIPI_DSI 133 depends on BACKLIGHT_CLASS_DEVICE 134 help 135 DRM panel driver for DSI command mode panels with support for 136 embedded and external backlights. 137 138config DRM_PANEL_LVDS 139 tristate "Generic LVDS panel driver" 140 depends on OF 141 depends on BACKLIGHT_CLASS_DEVICE 142 select VIDEOMODE_HELPERS 143 help 144 This driver supports LVDS panels that don't require device-specific 145 handling of power supplies or control signals. It implements automatic 146 backlight handling if the panel is attached to a backlight controller. 147 148config DRM_PANEL_HIMAX_HX83102 149 tristate "Himax HX83102-based panels" 150 depends on OF 151 depends on DRM_MIPI_DSI 152 depends on BACKLIGHT_CLASS_DEVICE 153 help 154 Say Y if you want to enable support for panels based on the 155 Himax HX83102 controller. 156 157config DRM_PANEL_HIMAX_HX83112A 158 tristate "Himax HX83112A-based DSI panel" 159 depends on OF 160 depends on DRM_MIPI_DSI 161 depends on BACKLIGHT_CLASS_DEVICE 162 select DRM_KMS_HELPER 163 help 164 Say Y here if you want to enable support for Himax HX83112A-based 165 display panels, such as the one found in the Fairphone 4 smartphone. 166 167config DRM_PANEL_HIMAX_HX8394 168 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 169 depends on OF 170 depends on DRM_MIPI_DSI 171 depends on BACKLIGHT_CLASS_DEVICE 172 help 173 Say Y if you want to enable support for panels based on the 174 Himax HX8394 controller, such as the HannStar HSD060BHW4 175 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 176 177 If M is selected the module will be called panel-himax-hx8394. 178 179config DRM_PANEL_ILITEK_IL9322 180 tristate "Ilitek ILI9322 320x240 QVGA panels" 181 depends on OF && SPI 182 select REGMAP 183 help 184 Say Y here if you want to enable support for Ilitek IL9322 185 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 186 187config DRM_PANEL_ILITEK_ILI9341 188 tristate "Ilitek ILI9341 240x320 QVGA panels" 189 depends on SPI 190 select DRM_KMS_HELPER 191 select DRM_GEM_DMA_HELPER 192 depends on BACKLIGHT_CLASS_DEVICE 193 select DRM_MIPI_DBI 194 help 195 Say Y here if you want to enable support for Ilitek IL9341 196 QVGA (240x320) RGB panels. support serial & parallel rgb 197 interface. 198 199config DRM_PANEL_ILITEK_ILI9805 200 tristate "Ilitek ILI9805-based panels" 201 depends on OF 202 depends on DRM_MIPI_DSI 203 depends on BACKLIGHT_CLASS_DEVICE 204 help 205 Say Y if you want to enable support for panels based on the 206 Ilitek ILI9805 controller. 207 208config DRM_PANEL_ILITEK_ILI9806E 209 tristate "Ilitek ILI9806E-based panels" 210 depends on OF 211 depends on DRM_MIPI_DSI 212 depends on BACKLIGHT_CLASS_DEVICE 213 help 214 Say Y if you want to enable support for panels based on the 215 Ilitek ILI9806E controller. 216 217config DRM_PANEL_ILITEK_ILI9881C 218 tristate "Ilitek ILI9881C-based panels" 219 depends on OF 220 depends on DRM_MIPI_DSI 221 depends on BACKLIGHT_CLASS_DEVICE 222 help 223 Say Y if you want to enable support for panels based on the 224 Ilitek ILI9881c controller. 225 226config DRM_PANEL_ILITEK_ILI9882T 227 tristate "Ilitek ILI9882t-based panels" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y if you want to enable support for panels based on the 233 Ilitek ILI9882t controller. 234 235config DRM_PANEL_INNOLUX_EJ030NA 236 tristate "Innolux EJ030NA 320x480 LCD panel" 237 depends on OF && SPI 238 select REGMAP_SPI 239 help 240 Say Y here to enable support for the Innolux/Chimei EJ030NA 241 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 242 and LDK handheld gaming consoles. 243 244config DRM_PANEL_INNOLUX_P079ZCA 245 tristate "Innolux P079ZCA panel" 246 depends on OF 247 depends on DRM_MIPI_DSI 248 depends on BACKLIGHT_CLASS_DEVICE 249 help 250 Say Y here if you want to enable support for Innolux P079ZCA 251 TFT-LCD modules. The panel has a 1024x768 resolution and uses 252 24 bit RGB per pixel. It provides a MIPI DSI interface to 253 the host and has a built-in LED backlight. 254 255config DRM_PANEL_JADARD_JD9365DA_H3 256 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 257 depends on OF 258 depends on DRM_MIPI_DSI 259 depends on BACKLIGHT_CLASS_DEVICE 260 help 261 Say Y here if you want to enable support for Jadard JD9365DA-H3 262 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 263 800RGBx1280 dots at maximum. 264 265config DRM_PANEL_JDI_LPM102A188A 266 tristate "JDI LPM102A188A DSI panel" 267 depends on OF && GPIOLIB 268 depends on DRM_MIPI_DSI 269 depends on BACKLIGHT_CLASS_DEVICE 270 help 271 Say Y here if you want to enable support for JDI LPM102A188A DSI 272 command mode panel as found in Google Pixel C devices. 273 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface 274 to the host. 275 276config DRM_PANEL_JDI_LT070ME05000 277 tristate "JDI LT070ME05000 WUXGA DSI panel" 278 depends on OF 279 depends on DRM_MIPI_DSI 280 depends on BACKLIGHT_CLASS_DEVICE 281 help 282 Say Y here if you want to enable support for JDI DSI video mode 283 panel as found in Google Nexus 7 (2013) devices. 284 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 285 24 bit per pixel. 286 287config DRM_PANEL_JDI_R63452 288 tristate "JDI R63452 Full HD DSI panel" 289 depends on OF 290 depends on DRM_MIPI_DSI 291 depends on BACKLIGHT_CLASS_DEVICE 292 help 293 Say Y here if you want to enable support for the JDI R63452 294 DSI command mode panel as found in Xiaomi Mi 5 Devices. 295 296config DRM_PANEL_KHADAS_TS050 297 tristate "Khadas TS050 panel" 298 depends on OF 299 depends on DRM_MIPI_DSI 300 depends on BACKLIGHT_CLASS_DEVICE 301 help 302 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 303 panel module. The panel has a 1080x1920 resolution and uses 304 24 bit RGB per pixel. It provides a MIPI DSI interface to 305 the host, a built-in LED backlight and touch controller. 306 307config DRM_PANEL_KINGDISPLAY_KD097D04 308 tristate "Kingdisplay kd097d04 panel" 309 depends on OF 310 depends on DRM_MIPI_DSI 311 depends on BACKLIGHT_CLASS_DEVICE 312 help 313 Say Y here if you want to enable support for Kingdisplay kd097d04 314 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 315 24 bit RGB per pixel. It provides a MIPI DSI interface to 316 the host and has a built-in LED backlight. 317 318config DRM_PANEL_LEADTEK_LTK050H3146W 319 tristate "Leadtek LTK050H3146W panel" 320 depends on OF 321 depends on DRM_MIPI_DSI 322 depends on BACKLIGHT_CLASS_DEVICE 323 help 324 Say Y here if you want to enable support for Leadtek LTK050H3146W 325 TFT-LCD modules. The panel has a 720x1280 resolution and uses 326 24 bit RGB per pixel. It provides a MIPI DSI interface to 327 the host and has a built-in LED backlight. 328 329config DRM_PANEL_LEADTEK_LTK500HD1829 330 tristate "Leadtek LTK500HD1829 panel" 331 depends on OF 332 depends on DRM_MIPI_DSI 333 depends on BACKLIGHT_CLASS_DEVICE 334 help 335 Say Y here if you want to enable support for Kingdisplay kd097d04 336 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 337 24 bit RGB per pixel. It provides a MIPI DSI interface to 338 the host and has a built-in LED backlight. 339 340config DRM_PANEL_LINCOLNTECH_LCD197 341 tristate "Lincoln Technologies lcd197 panel" 342 depends on OF 343 depends on DRM_MIPI_DSI 344 depends on BACKLIGHT_CLASS_DEVICE 345 help 346 Say Y here if you want to enable support for lincolntech lcd197 347 TFT-LCD modules. The panel has a 1080x1920 resolution and uses 348 24 bit RGB per pixel. It provides a MIPI DSI interface to 349 the host. 350 351config DRM_PANEL_LG_LB035Q02 352 tristate "LG LB035Q024573 RGB panel" 353 depends on GPIOLIB && OF && SPI 354 help 355 Say Y here if you want to enable support for the LB035Q02 RGB panel 356 (found on the Gumstix Overo Palo35 board). To compile this driver as 357 a module, choose M here. 358 359config DRM_PANEL_LG_LG4573 360 tristate "LG4573 RGB/SPI panel" 361 depends on OF && SPI 362 select VIDEOMODE_HELPERS 363 help 364 Say Y here if you want to enable support for LG4573 RGB panel. 365 To compile this driver as a module, choose M here. 366 367config DRM_PANEL_LG_SW43408 368 tristate "LG SW43408 panel" 369 depends on OF 370 depends on DRM_MIPI_DSI 371 depends on BACKLIGHT_CLASS_DEVICE 372 select DRM_DISPLAY_DP_HELPER 373 select DRM_DISPLAY_HELPER 374 help 375 Say Y here if you want to enable support for LG sw43408 panel. 376 The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per 377 pixel. It provides a MIPI DSI interface to the host and has a 378 built-in LED backlight. 379 380config DRM_PANEL_MAGNACHIP_D53E6EA8966 381 tristate "Magnachip D53E6EA8966 DSI panel" 382 depends on OF && SPI 383 depends on DRM_MIPI_DSI 384 depends on BACKLIGHT_CLASS_DEVICE 385 select DRM_MIPI_DBI 386 help 387 DRM panel driver for the Samsung AMS495QA01 panel controlled 388 with the Magnachip D53E6EA8966 panel IC. This panel receives 389 video data via DSI but commands via 9-bit SPI using DBI. 390 391config DRM_PANEL_MANTIX_MLAF057WE51 392 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 393 depends on OF 394 depends on DRM_MIPI_DSI 395 depends on BACKLIGHT_CLASS_DEVICE 396 help 397 Say Y here if you want to enable support for the Mantix 398 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 399 has a resolution of 720x1440 pixels, a built in backlight and touch 400 controller. 401 402config DRM_PANEL_NEC_NL8048HL11 403 tristate "NEC NL8048HL11 RGB panel" 404 depends on GPIOLIB && OF && SPI 405 help 406 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 407 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 408 as a module, choose M here. 409 410config DRM_PANEL_NEWVISION_NV3051D 411 tristate "NewVision NV3051D DSI panel" 412 depends on OF 413 depends on DRM_MIPI_DSI 414 depends on BACKLIGHT_CLASS_DEVICE 415 help 416 This driver supports the NV3051D based panel found on the Anbernic 417 RG353P and RG353V. 418 419config DRM_PANEL_NEWVISION_NV3052C 420 tristate "NewVision NV3052C RGB/SPI panel" 421 depends on OF && SPI 422 depends on BACKLIGHT_CLASS_DEVICE 423 select DRM_MIPI_DBI 424 help 425 Say Y here if you want to enable support for the panels built 426 around the NewVision NV3052C display controller. 427 428config DRM_PANEL_NOVATEK_NT35510 429 tristate "Novatek NT35510 RGB panel driver" 430 depends on OF 431 depends on DRM_MIPI_DSI 432 depends on BACKLIGHT_CLASS_DEVICE 433 help 434 Say Y here if you want to enable support for the panels built 435 around the Novatek NT35510 display controller, such as some 436 Hydis panels. 437 438config DRM_PANEL_NOVATEK_NT35560 439 tristate "Novatek NT35560 DSI command mode panel" 440 depends on OF 441 depends on DRM_MIPI_DSI 442 depends on BACKLIGHT_CLASS_DEVICE 443 select VIDEOMODE_HELPERS 444 help 445 Say Y here if you want to enable the Novatek NT35560 display 446 controller. This panel supports DSI in both command and video 447 mode. This supports several panels such as Sony ACX424AKM and 448 ACX424AKP. 449 450config DRM_PANEL_NOVATEK_NT35950 451 tristate "Novatek NT35950 DSI panel" 452 depends on OF 453 depends on DRM_MIPI_DSI 454 depends on BACKLIGHT_CLASS_DEVICE 455 help 456 Say Y here if you want to enable support for the panels built 457 around the Novatek NT35950 display controller, such as some 458 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 459 mobile phones. 460 461config DRM_PANEL_NOVATEK_NT36523 462 tristate "Novatek NT36523 panel driver" 463 depends on OF 464 depends on DRM_MIPI_DSI 465 depends on BACKLIGHT_CLASS_DEVICE 466 help 467 Say Y here if you want to enable support for the panels built 468 around the Novatek NT36523 display controller, such as some 469 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. 470 471config DRM_PANEL_NOVATEK_NT36672A 472 tristate "Novatek NT36672A DSI panel" 473 depends on OF 474 depends on DRM_MIPI_DSI 475 depends on BACKLIGHT_CLASS_DEVICE 476 help 477 Say Y here if you want to enable support for the panels built 478 around the Novatek NT36672A display controller, such as some 479 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 480 481config DRM_PANEL_NOVATEK_NT36672E 482 tristate "Novatek NT36672E DSI panel" 483 depends on OF 484 depends on DRM_MIPI_DSI 485 depends on BACKLIGHT_CLASS_DEVICE 486 help 487 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode 488 LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit 489 RGB per pixel. 490 491config DRM_PANEL_NOVATEK_NT39016 492 tristate "Novatek NT39016 RGB/SPI panel" 493 depends on OF && SPI 494 depends on BACKLIGHT_CLASS_DEVICE 495 select REGMAP_SPI 496 help 497 Say Y here if you want to enable support for the panels built 498 around the Novatek NT39016 display controller. 499 500config DRM_PANEL_OLIMEX_LCD_OLINUXINO 501 tristate "Olimex LCD-OLinuXino panel" 502 depends on OF 503 depends on I2C 504 depends on BACKLIGHT_CLASS_DEVICE 505 select CRC32 506 help 507 The panel is used with different sizes LCDs, from 480x272 to 508 1280x800, and 24 bit per pixel. 509 510 Say Y here if you want to enable support for Olimex Ltd. 511 LCD-OLinuXino panel. 512 513config DRM_PANEL_ORISETECH_OTA5601A 514 tristate "Orise Technology ota5601a RGB/SPI panel" 515 depends on SPI 516 depends on BACKLIGHT_CLASS_DEVICE 517 select REGMAP_SPI 518 help 519 Say Y here if you want to enable support for the panels built 520 around the Orise Technology OTA9601A display controller. 521 522config DRM_PANEL_ORISETECH_OTM8009A 523 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 524 depends on OF 525 depends on DRM_MIPI_DSI 526 depends on BACKLIGHT_CLASS_DEVICE 527 help 528 Say Y here if you want to enable support for Orise Technology 529 otm8009a 480x800 dsi 2dl panel. 530 531config DRM_PANEL_OSD_OSD101T2587_53TS 532 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 533 depends on OF 534 depends on DRM_MIPI_DSI 535 depends on BACKLIGHT_CLASS_DEVICE 536 help 537 Say Y here if you want to enable support for One Stop Displays 538 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 539 540config DRM_PANEL_PANASONIC_VVX10F034N00 541 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 542 depends on OF 543 depends on DRM_MIPI_DSI 544 depends on BACKLIGHT_CLASS_DEVICE 545 help 546 Say Y here if you want to enable support for Panasonic VVX10F034N00 547 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 548 Xperia Z2 tablets 549 550config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 551 tristate "Raspberry Pi 7-inch touchscreen panel" 552 depends on DRM_MIPI_DSI 553 help 554 Say Y here if you want to enable support for the Raspberry 555 Pi 7" Touchscreen. To compile this driver as a module, 556 choose M here. 557 558config DRM_PANEL_RAYDIUM_RM67191 559 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 560 depends on OF 561 depends on DRM_MIPI_DSI 562 depends on BACKLIGHT_CLASS_DEVICE 563 help 564 Say Y here if you want to enable support for Raydium RM67191 FHD 565 (1080x1920) DSI panel. 566 567config DRM_PANEL_RAYDIUM_RM68200 568 tristate "Raydium RM68200 720x1280 DSI video mode panel" 569 depends on OF 570 depends on DRM_MIPI_DSI 571 depends on BACKLIGHT_CLASS_DEVICE 572 help 573 Say Y here if you want to enable support for Raydium RM68200 574 720x1280 DSI video mode panel. 575 576config DRM_PANEL_RAYDIUM_RM692E5 577 tristate "Raydium RM692E5-based DSI panel" 578 depends on OF 579 depends on DRM_MIPI_DSI 580 depends on BACKLIGHT_CLASS_DEVICE 581 select DRM_DISPLAY_DP_HELPER 582 select DRM_DISPLAY_HELPER 583 help 584 Say Y here if you want to enable support for Raydium RM692E5-based 585 display panels, such as the one found in the Fairphone 5 smartphone. 586 587config DRM_PANEL_RAYDIUM_RM69380 588 tristate "Raydium RM69380-based DSI panel" 589 depends on OF && GPIOLIB 590 depends on DRM_MIPI_DSI 591 depends on BACKLIGHT_CLASS_DEVICE 592 help 593 Say Y here if you want to enable support for Raydium RM69380-based 594 display panels. 595 596 This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021 597 in combination with an EDO OLED panel. 598 599config DRM_PANEL_RONBO_RB070D30 600 tristate "Ronbo Electronics RB070D30 panel" 601 depends on OF 602 depends on DRM_MIPI_DSI 603 depends on BACKLIGHT_CLASS_DEVICE 604 help 605 Say Y here if you want to enable support for Ronbo Electronics 606 RB070D30 1024x600 DSI panel. 607 608config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 609 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 610 depends on OF 611 select DRM_MIPI_DSI 612 select VIDEOMODE_HELPERS 613 614config DRM_PANEL_SAMSUNG_ATNA33XC20 615 tristate "Samsung ATNA33XC20 eDP panel" 616 depends on OF 617 depends on BACKLIGHT_CLASS_DEVICE 618 depends on PM 619 select DRM_DISPLAY_DP_HELPER 620 select DRM_DISPLAY_HELPER 621 select DRM_DISPLAY_DP_AUX_BUS 622 help 623 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 624 be handled by the DRM_PANEL_SIMPLE driver because its power 625 sequencing is non-standard. 626 627config DRM_PANEL_SAMSUNG_DB7430 628 tristate "Samsung DB7430-based DPI panels" 629 depends on OF && SPI && GPIOLIB 630 depends on BACKLIGHT_CLASS_DEVICE 631 select DRM_MIPI_DBI 632 help 633 Say Y here if you want to enable support for the Samsung 634 DB7430 DPI display controller used in such devices as the 635 LMS397KF04 480x800 DPI panel. 636 637config DRM_PANEL_SAMSUNG_LD9040 638 tristate "Samsung LD9040 RGB/SPI panel" 639 depends on OF && SPI 640 depends on BACKLIGHT_CLASS_DEVICE 641 select VIDEOMODE_HELPERS 642 643config DRM_PANEL_SAMSUNG_S6E3FA7 644 tristate "Samsung S6E3FA7 panel driver" 645 depends on OF 646 depends on DRM_MIPI_DSI 647 depends on BACKLIGHT_CLASS_DEVICE 648 help 649 Say Y here if you want to enable support for the Samsung S6E3FA7 650 1920x2220 panel. 651 652config DRM_PANEL_SAMSUNG_S6D16D0 653 tristate "Samsung S6D16D0 DSI video mode panel" 654 depends on OF 655 depends on DRM_MIPI_DSI 656 select VIDEOMODE_HELPERS 657 658config DRM_PANEL_SAMSUNG_S6D27A1 659 tristate "Samsung S6D27A1 DPI panel driver" 660 depends on OF && SPI && GPIOLIB 661 select DRM_MIPI_DBI 662 help 663 Say Y here if you want to enable support for the Samsung 664 S6D27A1 DPI 480x800 panel. 665 666 This panel can be found in Samsung Galaxy Ace 2 667 GT-I8160 mobile phone. 668 669config DRM_PANEL_SAMSUNG_S6D7AA0 670 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller" 671 depends on OF 672 depends on BACKLIGHT_CLASS_DEVICE 673 select DRM_MIPI_DSI 674 select VIDEOMODE_HELPERS 675 676config DRM_PANEL_SAMSUNG_S6E3HA2 677 tristate "Samsung S6E3HA2 DSI video mode panel" 678 depends on OF 679 depends on DRM_MIPI_DSI 680 depends on BACKLIGHT_CLASS_DEVICE 681 select VIDEOMODE_HELPERS 682 683config DRM_PANEL_SAMSUNG_S6E63J0X03 684 tristate "Samsung S6E63J0X03 DSI command mode panel" 685 depends on OF 686 depends on DRM_MIPI_DSI 687 depends on BACKLIGHT_CLASS_DEVICE 688 select VIDEOMODE_HELPERS 689 690config DRM_PANEL_SAMSUNG_S6E63M0 691 tristate "Samsung S6E63M0 RGB panel" 692 depends on OF 693 depends on BACKLIGHT_CLASS_DEVICE 694 help 695 Say Y here if you want to enable support for Samsung S6E63M0 696 AMOLED LCD panel. This panel can be accessed using SPI or 697 DSI. 698 699config DRM_PANEL_SAMSUNG_S6E63M0_SPI 700 tristate "Samsung S6E63M0 RGB SPI interface" 701 depends on SPI 702 depends on DRM_PANEL_SAMSUNG_S6E63M0 703 default DRM_PANEL_SAMSUNG_S6E63M0 704 select DRM_MIPI_DBI 705 help 706 Say Y here if you want to be able to access the Samsung 707 S6E63M0 panel using SPI. 708 709config DRM_PANEL_SAMSUNG_S6E63M0_DSI 710 tristate "Samsung S6E63M0 RGB DSI interface" 711 depends on DRM_MIPI_DSI 712 depends on DRM_PANEL_SAMSUNG_S6E63M0 713 help 714 Say Y here if you want to be able to access the Samsung 715 S6E63M0 panel using DSI. 716 717config DRM_PANEL_SAMSUNG_S6E8AA0 718 tristate "Samsung S6E8AA0 DSI video mode panel" 719 depends on OF 720 select DRM_MIPI_DSI 721 select VIDEOMODE_HELPERS 722 723config DRM_PANEL_SAMSUNG_SOFEF00 724 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 725 depends on OF 726 depends on DRM_MIPI_DSI 727 depends on BACKLIGHT_CLASS_DEVICE 728 select VIDEOMODE_HELPERS 729 help 730 Say Y or M here if you want to enable support for the Samsung AMOLED 731 command mode panels found in the OnePlus 6/6T smartphones. 732 733 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 734 735config DRM_PANEL_SEIKO_43WVF1G 736 tristate "Seiko 43WVF1G panel" 737 depends on OF 738 depends on BACKLIGHT_CLASS_DEVICE 739 select VIDEOMODE_HELPERS 740 help 741 Say Y here if you want to enable support for the Seiko 742 43WVF1G controller for 800x480 LCD panels 743 744config DRM_PANEL_SHARP_LQ101R1SX01 745 tristate "Sharp LQ101R1SX01 panel" 746 depends on OF 747 depends on DRM_MIPI_DSI 748 depends on BACKLIGHT_CLASS_DEVICE 749 help 750 Say Y here if you want to enable support for Sharp LQ101R1SX01 751 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 752 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 753 the host and has a built-in LED backlight. 754 755 To compile this driver as a module, choose M here: the module 756 will be called panel-sharp-lq101r1sx01. 757 758config DRM_PANEL_SHARP_LS037V7DW01 759 tristate "Sharp LS037V7DW01 VGA LCD panel" 760 depends on GPIOLIB && OF && REGULATOR 761 help 762 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 763 (480x640) LCD panel (found on the TI SDP3430 board). 764 765config DRM_PANEL_SHARP_LS043T1LE01 766 tristate "Sharp LS043T1LE01 qHD video mode panel" 767 depends on OF 768 depends on DRM_MIPI_DSI 769 depends on BACKLIGHT_CLASS_DEVICE 770 help 771 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 772 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 773 774config DRM_PANEL_SHARP_LS060T1SX01 775 tristate "Sharp LS060T1SX01 FullHD video mode panel" 776 depends on OF 777 depends on DRM_MIPI_DSI 778 depends on BACKLIGHT_CLASS_DEVICE 779 help 780 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 781 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 782 Bundle. 783 784config DRM_PANEL_SITRONIX_ST7701 785 tristate "Sitronix ST7701 panel driver" 786 depends on OF 787 depends on DRM_MIPI_DSI 788 depends on BACKLIGHT_CLASS_DEVICE 789 help 790 Say Y here if you want to enable support for the Sitronix 791 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 792 system interfaces. 793 794config DRM_PANEL_SITRONIX_ST7703 795 tristate "Sitronix ST7703 based MIPI touchscreen panels" 796 depends on OF 797 depends on DRM_MIPI_DSI 798 depends on BACKLIGHT_CLASS_DEVICE 799 help 800 Say Y here if you want to enable support for Sitronix ST7703 based 801 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 802 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 803 in backlight and touch controller. 804 Touch input support is provided by the goodix driver and needs to be 805 selected separately. 806 807config DRM_PANEL_SITRONIX_ST7789V 808 tristate "Sitronix ST7789V panel" 809 depends on OF && SPI 810 depends on BACKLIGHT_CLASS_DEVICE 811 help 812 Say Y here if you want to enable support for the Sitronix 813 ST7789V controller for 240x320 LCD panels 814 815config DRM_PANEL_SONY_ACX565AKM 816 tristate "Sony ACX565AKM panel" 817 depends on GPIOLIB && OF && SPI 818 depends on BACKLIGHT_CLASS_DEVICE 819 help 820 Say Y here if you want to enable support for the Sony ACX565AKM 821 800x600 3.5" panel (found on the Nokia N900). 822 823config DRM_PANEL_SONY_TD4353_JDI 824 tristate "Sony TD4353 JDI panel" 825 depends on GPIOLIB && OF 826 depends on DRM_MIPI_DSI 827 depends on BACKLIGHT_CLASS_DEVICE 828 help 829 Say Y here if you want to enable support for the Sony Tama 830 TD4353 JDI command mode panel as found on some Sony Xperia 831 XZ2 and XZ2 Compact smartphones. 832 833config DRM_PANEL_SONY_TULIP_TRULY_NT35521 834 tristate "Sony Tulip Truly NT35521 panel" 835 depends on GPIOLIB && OF 836 depends on DRM_MIPI_DSI 837 depends on BACKLIGHT_CLASS_DEVICE 838 help 839 Say Y here if you want to enable support for the Sony Tulip 840 NT35521 1280x720 video mode panel as found on Sony Xperia M4 841 Aqua phone. 842 843config DRM_PANEL_STARTEK_KD070FHFID015 844 tristate "STARTEK KD070FHFID015 panel" 845 depends on OF 846 depends on DRM_MIPI_DSI 847 depends on BACKLIGHT_CLASS_DEVICE 848 help 849 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel 850 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display 851 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to 852 the host, a built-in LED backlight and touch controller. 853 854config DRM_PANEL_EDP 855 tristate "support for simple Embedded DisplayPort panels" 856 depends on OF 857 depends on BACKLIGHT_CLASS_DEVICE 858 depends on PM 859 select VIDEOMODE_HELPERS 860 select DRM_DISPLAY_DP_HELPER 861 select DRM_DISPLAY_HELPER 862 select DRM_DISPLAY_DP_AUX_BUS 863 select DRM_KMS_HELPER 864 help 865 DRM panel driver for dumb eDP panels that need at most a regulator and 866 a GPIO to be powered up. Optionally a backlight can be attached so 867 that it can be automatically turned off when the panel goes into a 868 low power state. 869 870config DRM_PANEL_SIMPLE 871 tristate "support for simple panels (other than eDP ones)" 872 depends on OF 873 depends on BACKLIGHT_CLASS_DEVICE 874 depends on PM 875 select VIDEOMODE_HELPERS 876 help 877 DRM panel driver for dumb non-eDP panels that need at most a regulator 878 and a GPIO to be powered up. Optionally a backlight can be attached so 879 that it can be automatically turned off when the panel goes into a 880 low power state. 881 882config DRM_PANEL_SYNAPTICS_R63353 883 tristate "Synaptics R63353-based panels" 884 depends on OF 885 depends on DRM_MIPI_DSI 886 depends on BACKLIGHT_CLASS_DEVICE 887 help 888 Say Y if you want to enable support for panels based on the 889 Synaptics R63353 controller. 890 891config DRM_PANEL_TDO_TL070WSH30 892 tristate "TDO TL070WSH30 DSI panel" 893 depends on OF 894 depends on DRM_MIPI_DSI 895 depends on BACKLIGHT_CLASS_DEVICE 896 help 897 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 898 panel module. The panel has a 1024×600 resolution and uses 899 24 bit RGB per pixel. It provides a MIPI DSI interface to 900 the host, a built-in LED backlight and touch controller. 901 902config DRM_PANEL_TPO_TD028TTEC1 903 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 904 depends on OF && SPI 905 depends on BACKLIGHT_CLASS_DEVICE 906 help 907 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 908 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 909 910config DRM_PANEL_TPO_TD043MTEA1 911 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 912 depends on GPIOLIB && OF && REGULATOR && SPI 913 help 914 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 915 4.3" panel (found on the OMAP3 Pandora board). 916 917config DRM_PANEL_TPO_TPG110 918 tristate "TPO TPG 800x400 panel" 919 depends on OF && SPI && GPIOLIB 920 depends on BACKLIGHT_CLASS_DEVICE 921 help 922 Say Y here if you want to enable support for TPO TPG110 923 400CH LTPS TFT LCD Single Chip Digital Driver for up to 924 800x400 LCD panels. 925 926config DRM_PANEL_TRULY_NT35597_WQXGA 927 tristate "Truly WQXGA" 928 depends on OF 929 depends on DRM_MIPI_DSI 930 help 931 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 932 Video Mode panel 933 934config DRM_PANEL_VISIONOX_R66451 935 tristate "Visionox R66451" 936 depends on OF 937 depends on DRM_MIPI_DSI 938 depends on BACKLIGHT_CLASS_DEVICE 939 select DRM_DISPLAY_DP_HELPER 940 select DRM_DISPLAY_HELPER 941 help 942 Say Y here if you want to enable support for Visionox 943 R66451 1080x2340 AMOLED DSI panel. 944 945config DRM_PANEL_VISIONOX_RM69299 946 tristate "Visionox RM69299" 947 depends on OF 948 depends on DRM_MIPI_DSI 949 help 950 Say Y here if you want to enable support for Visionox 951 RM69299 DSI Video Mode panel. 952 953config DRM_PANEL_VISIONOX_VTDR6130 954 tristate "Visionox VTDR6130" 955 depends on OF 956 depends on DRM_MIPI_DSI 957 depends on BACKLIGHT_CLASS_DEVICE 958 help 959 Say Y here if you want to enable support for Visionox 960 VTDR6130 1080x2400 AMOLED DSI panel. 961 962config DRM_PANEL_WIDECHIPS_WS2401 963 tristate "Widechips WS2401 DPI panel driver" 964 depends on SPI && GPIOLIB 965 depends on BACKLIGHT_CLASS_DEVICE 966 select DRM_MIPI_DBI 967 help 968 Say Y here if you want to enable support for the Widechips WS2401 DPI 969 480x800 display controller used in panels such as Samsung LMS380KF01. 970 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 971 972config DRM_PANEL_XINPENG_XPP055C272 973 tristate "Xinpeng XPP055C272 panel driver" 974 depends on OF 975 depends on DRM_MIPI_DSI 976 depends on BACKLIGHT_CLASS_DEVICE 977 help 978 Say Y here if you want to enable support for the Xinpeng 979 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 980 system interfaces. 981endmenu 982