xref: /linux/drivers/gpu/drm/panel/Kconfig (revision 17accf4f228c68a062ca24a79ee22aa96e278512) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TD4320
71	tristate "BOE TD4320 DSI panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to enable support for BOE TD4320 1080x2340
77	  video mode panel found in Xiaomi Redmi Note 7 smartphones.
78
79config DRM_PANEL_BOE_TH101MB31UIG002_28A
80	tristate "Boe TH101MB31UIG002-28A panel"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  Say Y here if you want to enable support for Boe
86	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
87	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
88	  interface to the host and has a built-in LED backlight.
89
90config DRM_PANEL_BOE_TV101WUM_NL6
91	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
97	  45NA WUXGA PANEL DSI Video Mode panel
98
99config DRM_PANEL_BOE_TV101WUM_LL2
100	tristate "BOE TV101WUM LL2 1200x1920 panel"
101	depends on OF
102	depends on DRM_MIPI_DSI
103	depends on BACKLIGHT_CLASS_DEVICE
104	help
105	  Say Y here if you want to support for BOE TV101WUM-LL2
106	  WUXGA PANEL DSI Video Mode panel
107
108config DRM_PANEL_EBBG_FT8719
109	tristate "EBBG FT8719 panel driver"
110	depends on OF
111	depends on DRM_MIPI_DSI
112	depends on BACKLIGHT_CLASS_DEVICE
113	help
114	  Say Y here if you want to enable support for the EBBG FT8719
115	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
116	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
117	  interface to the host.
118
119config DRM_PANEL_ELIDA_KD35T133
120	tristate "Elida KD35T133 panel driver"
121	depends on OF
122	depends on DRM_MIPI_DSI
123	depends on BACKLIGHT_CLASS_DEVICE
124	help
125	  Say Y here if you want to enable support for the Elida
126	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
127	  system interfaces.
128
129config DRM_PANEL_FEIXIN_K101_IM2BA02
130	tristate "Feixin K101 IM2BA02 panel"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
136	  4-lane 800x1280 MIPI DSI panel.
137
138config DRM_PANEL_FEIYANG_FY07024DI26A30D
139	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
140	depends on OF
141	depends on DRM_MIPI_DSI
142	depends on BACKLIGHT_CLASS_DEVICE
143	help
144	  Say Y if you want to enable support for panels based on the
145	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
146
147config DRM_PANEL_DSI_CM
148	tristate "Generic DSI command mode panels"
149	depends on OF
150	depends on DRM_MIPI_DSI
151	depends on BACKLIGHT_CLASS_DEVICE
152	help
153	  DRM panel driver for DSI command mode panels with support for
154	  embedded and external backlights.
155
156config DRM_PANEL_LVDS
157	tristate "Generic LVDS panel driver"
158	depends on OF
159	depends on BACKLIGHT_CLASS_DEVICE
160	select VIDEOMODE_HELPERS
161	help
162	  This driver supports LVDS panels that don't require device-specific
163	  handling of power supplies or control signals. It implements automatic
164	  backlight handling if the panel is attached to a backlight controller.
165
166config DRM_PANEL_HIMAX_HX8279
167	tristate "Himax HX8279-based panels"
168	depends on OF
169	depends on DRM_MIPI_DSI
170	depends on BACKLIGHT_CLASS_DEVICE
171	help
172	  Say Y if you want to enable support for panels based on the
173	  Himax HX8279 controller, such as the Startek KD070FHFID078
174	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
175	  and others.
176
177config DRM_PANEL_HIMAX_HX83102
178	tristate "Himax HX83102-based panels"
179	depends on OF
180	depends on DRM_MIPI_DSI
181	depends on BACKLIGHT_CLASS_DEVICE
182	help
183	  Say Y if you want to enable support for panels based on the
184	  Himax HX83102 controller.
185
186config DRM_PANEL_HIMAX_HX83112A
187	tristate "Himax HX83112A-based DSI panel"
188	depends on OF
189	depends on DRM_MIPI_DSI
190	depends on BACKLIGHT_CLASS_DEVICE
191	select DRM_KMS_HELPER
192	help
193	  Say Y here if you want to enable support for Himax HX83112A-based
194	  display panels, such as the one found in the Fairphone 4 smartphone.
195
196config DRM_PANEL_HIMAX_HX8394
197	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
198	depends on OF
199	depends on DRM_MIPI_DSI
200	depends on BACKLIGHT_CLASS_DEVICE
201	help
202	  Say Y if you want to enable support for panels based on the
203	  Himax HX8394 controller, such as the HannStar HSD060BHW4
204	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
205
206	  If M is selected the module will be called panel-himax-hx8394.
207
208config DRM_PANEL_ILITEK_IL9322
209	tristate "Ilitek ILI9322 320x240 QVGA panels"
210	depends on OF && SPI
211	select REGMAP
212	help
213	  Say Y here if you want to enable support for Ilitek IL9322
214	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
215
216config DRM_PANEL_ILITEK_ILI9341
217	tristate "Ilitek ILI9341 240x320 QVGA panels"
218	depends on SPI
219	select DRM_KMS_HELPER
220	select DRM_GEM_DMA_HELPER
221	depends on BACKLIGHT_CLASS_DEVICE
222	select DRM_MIPI_DBI
223	help
224	  Say Y here if you want to enable support for Ilitek IL9341
225	  QVGA (240x320) RGB panels. support serial & parallel rgb
226	  interface.
227
228config DRM_PANEL_ILITEK_ILI9805
229	tristate "Ilitek ILI9805-based panels"
230	depends on OF
231	depends on DRM_MIPI_DSI
232	depends on BACKLIGHT_CLASS_DEVICE
233	help
234	  Say Y if you want to enable support for panels based on the
235	  Ilitek ILI9805 controller.
236
237config DRM_PANEL_ILITEK_ILI9806E
238	tristate "Ilitek ILI9806E-based panels"
239	depends on OF
240	depends on DRM_MIPI_DSI
241	depends on BACKLIGHT_CLASS_DEVICE
242	help
243	  Say Y if you want to enable support for panels based on the
244	  Ilitek ILI9806E controller.
245
246config DRM_PANEL_ILITEK_ILI9881C
247	tristate "Ilitek ILI9881C-based panels"
248	depends on OF
249	depends on DRM_MIPI_DSI
250	depends on BACKLIGHT_CLASS_DEVICE
251	help
252	  Say Y if you want to enable support for panels based on the
253	  Ilitek ILI9881c controller.
254
255config DRM_PANEL_ILITEK_ILI9882T
256	tristate "Ilitek ILI9882t-based panels"
257	depends on OF
258	depends on DRM_MIPI_DSI
259	depends on BACKLIGHT_CLASS_DEVICE
260	help
261	  Say Y if you want to enable support for panels based on the
262	  Ilitek ILI9882t controller.
263
264config DRM_PANEL_INNOLUX_EJ030NA
265        tristate "Innolux EJ030NA 320x480 LCD panel"
266        depends on OF && SPI
267        select REGMAP_SPI
268        help
269          Say Y here to enable support for the Innolux/Chimei EJ030NA
270          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
271          and LDK handheld gaming consoles.
272
273config DRM_PANEL_INNOLUX_P079ZCA
274	tristate "Innolux P079ZCA panel"
275	depends on OF
276	depends on DRM_MIPI_DSI
277	depends on BACKLIGHT_CLASS_DEVICE
278	help
279	  Say Y here if you want to enable support for Innolux P079ZCA
280	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
281	  24 bit RGB per pixel. It provides a MIPI DSI interface to
282	  the host and has a built-in LED backlight.
283
284config DRM_PANEL_JADARD_JD9365DA_H3
285	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
286	depends on OF
287	depends on DRM_MIPI_DSI
288	depends on BACKLIGHT_CLASS_DEVICE
289	help
290	  Say Y here if you want to enable support for Jadard JD9365DA-H3
291	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
292	  800RGBx1280 dots at maximum.
293
294config DRM_PANEL_JDI_LPM102A188A
295	tristate "JDI LPM102A188A DSI panel"
296	depends on OF && GPIOLIB
297	depends on DRM_MIPI_DSI
298	depends on BACKLIGHT_CLASS_DEVICE
299	help
300	  Say Y here if you want to enable support for JDI LPM102A188A DSI
301	  command mode panel as found in Google Pixel C devices.
302	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
303	  to the host.
304
305config DRM_PANEL_JDI_LT070ME05000
306	tristate "JDI LT070ME05000 WUXGA DSI panel"
307	depends on OF
308	depends on DRM_MIPI_DSI
309	depends on BACKLIGHT_CLASS_DEVICE
310	help
311	  Say Y here if you want to enable support for JDI DSI video mode
312	  panel as found in Google Nexus 7 (2013) devices.
313	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
314	  24 bit per pixel.
315
316config DRM_PANEL_JDI_R63452
317	tristate "JDI R63452 Full HD DSI panel"
318	depends on OF
319	depends on DRM_MIPI_DSI
320	depends on BACKLIGHT_CLASS_DEVICE
321	help
322	  Say Y here if you want to enable support for the JDI R63452
323	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
324
325config DRM_PANEL_KHADAS_TS050
326	tristate "Khadas TS050 panel"
327	depends on OF
328	depends on DRM_MIPI_DSI
329	depends on BACKLIGHT_CLASS_DEVICE
330	help
331	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
332	  panel module. The panel has a 1080x1920 resolution and uses
333	  24 bit RGB per pixel. It provides a MIPI DSI interface to
334	  the host, a built-in LED backlight and touch controller.
335
336config DRM_PANEL_KINGDISPLAY_KD097D04
337	tristate "Kingdisplay kd097d04 panel"
338	depends on OF
339	depends on DRM_MIPI_DSI
340	depends on BACKLIGHT_CLASS_DEVICE
341	help
342	  Say Y here if you want to enable support for Kingdisplay kd097d04
343	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
344	  24 bit RGB per pixel. It provides a MIPI DSI interface to
345	  the host and has a built-in LED backlight.
346
347config DRM_PANEL_LEADTEK_LTK050H3146W
348	tristate "Leadtek LTK050H3146W panel"
349	depends on OF
350	depends on DRM_MIPI_DSI
351	depends on BACKLIGHT_CLASS_DEVICE
352	help
353	  Say Y here if you want to enable support for Leadtek LTK050H3146W
354	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
355	  24 bit RGB per pixel. It provides a MIPI DSI interface to
356	  the host and has a built-in LED backlight.
357
358config DRM_PANEL_LEADTEK_LTK500HD1829
359	tristate "Leadtek LTK500HD1829 panel"
360	depends on OF
361	depends on DRM_MIPI_DSI
362	depends on BACKLIGHT_CLASS_DEVICE
363	help
364	  Say Y here if you want to enable support for Kingdisplay kd097d04
365	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
366	  24 bit RGB per pixel. It provides a MIPI DSI interface to
367	  the host and has a built-in LED backlight.
368
369config DRM_PANEL_LINCOLNTECH_LCD197
370	tristate "Lincoln Technologies lcd197 panel"
371	depends on OF
372	depends on DRM_MIPI_DSI
373	depends on BACKLIGHT_CLASS_DEVICE
374	help
375	  Say Y here if you want to enable support for lincolntech lcd197
376	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
377	  24 bit RGB per pixel. It provides a MIPI DSI interface to
378	  the host.
379
380config DRM_PANEL_LG_LB035Q02
381	tristate "LG LB035Q024573 RGB panel"
382	depends on GPIOLIB && OF && SPI
383	help
384	  Say Y here if you want to enable support for the LB035Q02 RGB panel
385	  (found on the Gumstix Overo Palo35 board). To compile this driver as
386	  a module, choose M here.
387
388config DRM_PANEL_LG_LG4573
389	tristate "LG4573 RGB/SPI panel"
390	depends on OF && SPI
391	select VIDEOMODE_HELPERS
392	help
393	  Say Y here if you want to enable support for LG4573 RGB panel.
394	  To compile this driver as a module, choose M here.
395
396config DRM_PANEL_LG_SW43408
397	tristate "LG SW43408 panel"
398	depends on OF
399	depends on DRM_MIPI_DSI
400	depends on BACKLIGHT_CLASS_DEVICE
401	select DRM_DISPLAY_DSC_HELPER
402	select DRM_DISPLAY_HELPER
403	help
404	  Say Y here if you want to enable support for LG sw43408 panel.
405	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
406	  pixel. It provides a MIPI DSI interface to the host and has a
407	  built-in LED backlight.
408
409config DRM_PANEL_MAGNACHIP_D53E6EA8966
410	tristate "Magnachip D53E6EA8966 DSI panel"
411	depends on OF && SPI
412	depends on DRM_MIPI_DSI
413	depends on BACKLIGHT_CLASS_DEVICE
414	select DRM_MIPI_DBI
415	help
416	  DRM panel driver for the Samsung AMS495QA01 panel controlled
417	  with the Magnachip D53E6EA8966 panel IC. This panel receives
418	  video data via DSI but commands via 9-bit SPI using DBI.
419
420config DRM_PANEL_MANTIX_MLAF057WE51
421	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
422	depends on OF
423	depends on DRM_MIPI_DSI
424	depends on BACKLIGHT_CLASS_DEVICE
425	help
426	  Say Y here if you want to enable support for the Mantix
427	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
428	  has a resolution of 720x1440 pixels, a built in backlight and touch
429	  controller.
430
431config DRM_PANEL_NEC_NL8048HL11
432	tristate "NEC NL8048HL11 RGB panel"
433	depends on GPIOLIB && OF && SPI
434	help
435	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
436	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
437	  as a module, choose M here.
438
439config DRM_PANEL_NEWVISION_NV3051D
440	tristate "NewVision NV3051D DSI panel"
441	depends on OF
442	depends on DRM_MIPI_DSI
443	depends on BACKLIGHT_CLASS_DEVICE
444	help
445	  This driver supports the NV3051D based panel found on the Anbernic
446	  RG353P and RG353V.
447
448config DRM_PANEL_NEWVISION_NV3052C
449	tristate "NewVision NV3052C RGB/SPI panel"
450	depends on OF && SPI
451	depends on BACKLIGHT_CLASS_DEVICE
452	select DRM_MIPI_DBI
453	help
454	  Say Y here if you want to enable support for the panels built
455	  around the NewVision NV3052C display controller.
456
457config DRM_PANEL_NOVATEK_NT35510
458	tristate "Novatek NT35510 RGB panel driver"
459	depends on OF
460	depends on DRM_MIPI_DSI
461	depends on BACKLIGHT_CLASS_DEVICE
462	help
463	  Say Y here if you want to enable support for the panels built
464	  around the Novatek NT35510 display controller, such as some
465	  Hydis panels.
466
467config DRM_PANEL_NOVATEK_NT35560
468	tristate "Novatek NT35560 DSI command mode panel"
469	depends on OF
470	depends on DRM_MIPI_DSI
471	depends on BACKLIGHT_CLASS_DEVICE
472	select VIDEOMODE_HELPERS
473	help
474	  Say Y here if you want to enable the Novatek NT35560 display
475	  controller. This panel supports DSI in both command and video
476	  mode. This supports several panels such as Sony ACX424AKM and
477	  ACX424AKP.
478
479config DRM_PANEL_NOVATEK_NT35950
480	tristate "Novatek NT35950 DSI panel"
481	depends on OF
482	depends on DRM_MIPI_DSI
483	depends on BACKLIGHT_CLASS_DEVICE
484	help
485	  Say Y here if you want to enable support for the panels built
486	  around the Novatek NT35950 display controller, such as some
487	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
488	  mobile phones.
489
490config DRM_PANEL_NOVATEK_NT36523
491	tristate "Novatek NT36523 panel driver"
492	depends on OF
493	depends on DRM_MIPI_DSI
494	depends on BACKLIGHT_CLASS_DEVICE
495	help
496	  Say Y here if you want to enable support for the panels built
497	  around the Novatek NT36523 display controller, such as some
498	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
499
500config DRM_PANEL_NOVATEK_NT36672A
501	tristate "Novatek NT36672A DSI panel"
502	depends on OF
503	depends on DRM_MIPI_DSI
504	depends on BACKLIGHT_CLASS_DEVICE
505	help
506	  Say Y here if you want to enable support for the panels built
507	  around the Novatek NT36672A display controller, such as some
508	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
509
510config DRM_PANEL_NOVATEK_NT36672E
511	tristate "Novatek NT36672E DSI panel"
512	depends on OF
513	depends on DRM_MIPI_DSI
514	depends on BACKLIGHT_CLASS_DEVICE
515	help
516	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
517	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
518	  RGB per pixel.
519
520config DRM_PANEL_NOVATEK_NT39016
521	tristate "Novatek NT39016 RGB/SPI panel"
522	depends on OF && SPI
523	depends on BACKLIGHT_CLASS_DEVICE
524	select REGMAP_SPI
525	help
526	  Say Y here if you want to enable support for the panels built
527	  around the Novatek NT39016 display controller.
528
529config DRM_PANEL_OLIMEX_LCD_OLINUXINO
530	tristate "Olimex LCD-OLinuXino panel"
531	depends on OF
532	depends on I2C
533	depends on BACKLIGHT_CLASS_DEVICE
534	select CRC32
535	help
536	  The panel is used with different sizes LCDs, from 480x272 to
537	  1280x800, and 24 bit per pixel.
538
539	  Say Y here if you want to enable support for Olimex Ltd.
540	  LCD-OLinuXino panel.
541
542config DRM_PANEL_ORISETECH_OTA5601A
543        tristate "Orise Technology ota5601a RGB/SPI panel"
544        depends on SPI
545        depends on BACKLIGHT_CLASS_DEVICE
546        select REGMAP_SPI
547        help
548          Say Y here if you want to enable support for the panels built
549          around the Orise Technology OTA9601A display controller.
550
551config DRM_PANEL_ORISETECH_OTM8009A
552	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
553	depends on OF
554	depends on DRM_MIPI_DSI
555	depends on BACKLIGHT_CLASS_DEVICE
556	help
557	  Say Y here if you want to enable support for Orise Technology
558	  otm8009a 480x800 dsi 2dl panel.
559
560config DRM_PANEL_OSD_OSD101T2587_53TS
561	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
562	depends on OF
563	depends on DRM_MIPI_DSI
564	depends on BACKLIGHT_CLASS_DEVICE
565	help
566	  Say Y here if you want to enable support for One Stop Displays
567	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
568
569config DRM_PANEL_PANASONIC_VVX10F034N00
570	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
571	depends on OF
572	depends on DRM_MIPI_DSI
573	depends on BACKLIGHT_CLASS_DEVICE
574	help
575	  Say Y here if you want to enable support for Panasonic VVX10F034N00
576	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
577	  Xperia Z2 tablets
578
579config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
580	tristate "Raspberry Pi 7-inch touchscreen panel"
581	depends on DRM_MIPI_DSI
582	help
583	  Say Y here if you want to enable support for the Raspberry
584	  Pi 7" Touchscreen.  To compile this driver as a module,
585	  choose M here.
586
587config DRM_PANEL_RAYDIUM_RM67191
588	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
589	depends on OF
590	depends on DRM_MIPI_DSI
591	depends on BACKLIGHT_CLASS_DEVICE
592	help
593	  Say Y here if you want to enable support for Raydium RM67191 FHD
594	  (1080x1920) DSI panel.
595
596config DRM_PANEL_RAYDIUM_RM67200
597	tristate "Raydium RM67200-based DSI panel"
598	depends on OF
599	depends on DRM_MIPI_DSI
600	help
601	  Say Y here if you want to enable support for Raydium RM67200-based
602	  DSI video mode panels. This panel controller can be found in the
603	  Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
604	  evaluation boards.
605
606config DRM_PANEL_RAYDIUM_RM68200
607	tristate "Raydium RM68200 720x1280 DSI video mode panel"
608	depends on OF
609	depends on DRM_MIPI_DSI
610	depends on BACKLIGHT_CLASS_DEVICE
611	help
612	  Say Y here if you want to enable support for Raydium RM68200
613	  720x1280 DSI video mode panel.
614
615config DRM_PANEL_RAYDIUM_RM692E5
616	tristate "Raydium RM692E5-based DSI panel"
617	depends on OF
618	depends on DRM_MIPI_DSI
619	depends on BACKLIGHT_CLASS_DEVICE
620	select DRM_DISPLAY_DSC_HELPER
621	select DRM_DISPLAY_HELPER
622	help
623	  Say Y here if you want to enable support for Raydium RM692E5-based
624	  display panels, such as the one found in the Fairphone 5 smartphone.
625
626config DRM_PANEL_RAYDIUM_RM69380
627	tristate "Raydium RM69380-based DSI panel"
628	depends on OF && GPIOLIB
629	depends on DRM_MIPI_DSI
630	depends on BACKLIGHT_CLASS_DEVICE
631	help
632	  Say Y here if you want to enable support for Raydium RM69380-based
633	  display panels.
634
635	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
636	  in combination with an EDO OLED panel.
637
638config DRM_PANEL_RONBO_RB070D30
639	tristate "Ronbo Electronics RB070D30 panel"
640	depends on OF
641	depends on DRM_MIPI_DSI
642	depends on BACKLIGHT_CLASS_DEVICE
643	help
644	  Say Y here if you want to enable support for Ronbo Electronics
645	  RB070D30 1024x600 DSI panel.
646
647config DRM_PANEL_SAMSUNG_AMS581VF01
648	tristate "Samsung AMS581VF01 panel"
649	depends on OF
650	depends on DRM_MIPI_DSI
651	depends on BACKLIGHT_CLASS_DEVICE
652	help
653	  Say Y or M here if you want to enable support for the
654	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
655
656config DRM_PANEL_SAMSUNG_AMS639RQ08
657	tristate "Samsung AMS639RQ08 panel"
658	depends on OF
659	depends on DRM_MIPI_DSI
660	depends on BACKLIGHT_CLASS_DEVICE
661	help
662	  Say Y or M here if you want to enable support for the
663	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
664
665config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
666	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
667	depends on GPIOLIB && OF && REGULATOR
668	depends on DRM_MIPI_DSI
669	depends on BACKLIGHT_CLASS_DEVICE
670	help
671	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
672	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
673	  GT-I9195I). To compile this driver as a module, choose M here.
674
675config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
676	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
677	depends on OF
678	select DRM_MIPI_DSI
679	select VIDEOMODE_HELPERS
680
681config DRM_PANEL_SAMSUNG_ATNA33XC20
682	tristate "Samsung ATNA33XC20 eDP panel"
683	depends on OF
684	depends on BACKLIGHT_CLASS_DEVICE
685	depends on PM
686	select DRM_DISPLAY_DP_HELPER
687	select DRM_DISPLAY_HELPER
688	select DRM_DISPLAY_DP_AUX_BUS
689	help
690	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
691	  be handled by the DRM_PANEL_SIMPLE driver because its power
692	  sequencing is non-standard.
693
694config DRM_PANEL_SAMSUNG_DB7430
695	tristate "Samsung DB7430-based DPI panels"
696	depends on OF && SPI && GPIOLIB
697	depends on BACKLIGHT_CLASS_DEVICE
698	select DRM_MIPI_DBI
699	help
700	  Say Y here if you want to enable support for the Samsung
701	  DB7430 DPI display controller used in such devices as the
702	  LMS397KF04 480x800 DPI panel.
703
704config DRM_PANEL_SAMSUNG_LD9040
705	tristate "Samsung LD9040 RGB/SPI panel"
706	depends on OF && SPI
707	depends on BACKLIGHT_CLASS_DEVICE
708	select VIDEOMODE_HELPERS
709
710config DRM_PANEL_SAMSUNG_S6E3FA7
711	tristate "Samsung S6E3FA7 panel driver"
712	depends on OF
713	depends on DRM_MIPI_DSI
714	depends on BACKLIGHT_CLASS_DEVICE
715	help
716	  Say Y here if you want to enable support for the Samsung S6E3FA7
717	  1920x2220 panel.
718
719config DRM_PANEL_SAMSUNG_S6D16D0
720	tristate "Samsung S6D16D0 DSI video mode panel"
721	depends on OF
722	depends on DRM_MIPI_DSI
723	select VIDEOMODE_HELPERS
724
725config DRM_PANEL_SAMSUNG_S6D27A1
726	tristate "Samsung S6D27A1 DPI panel driver"
727	depends on OF && SPI && GPIOLIB
728	select DRM_MIPI_DBI
729	help
730	  Say Y here if you want to enable support for the Samsung
731	  S6D27A1 DPI 480x800 panel.
732
733	  This panel can be found in Samsung Galaxy Ace 2
734	  GT-I8160 mobile phone.
735
736config DRM_PANEL_SAMSUNG_S6D7AA0
737	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
738	depends on OF
739	depends on BACKLIGHT_CLASS_DEVICE
740	select DRM_MIPI_DSI
741	select VIDEOMODE_HELPERS
742
743config DRM_PANEL_SAMSUNG_S6E3HA2
744	tristate "Samsung S6E3HA2 DSI video mode panel"
745	depends on OF
746	depends on DRM_MIPI_DSI
747	depends on BACKLIGHT_CLASS_DEVICE
748	select VIDEOMODE_HELPERS
749
750config DRM_PANEL_SAMSUNG_S6E3HA8
751	tristate "Samsung S6E3HA8 DSI video mode panel"
752	depends on OF
753	depends on DRM_MIPI_DSI
754	depends on BACKLIGHT_CLASS_DEVICE
755	select DRM_DISPLAY_DSC_HELPER
756	select VIDEOMODE_HELPERS
757
758config DRM_PANEL_SAMSUNG_S6E63J0X03
759	tristate "Samsung S6E63J0X03 DSI command mode panel"
760	depends on OF
761	depends on DRM_MIPI_DSI
762	depends on BACKLIGHT_CLASS_DEVICE
763	select VIDEOMODE_HELPERS
764
765config DRM_PANEL_SAMSUNG_S6E63M0
766	tristate "Samsung S6E63M0 RGB panel"
767	depends on OF
768	depends on BACKLIGHT_CLASS_DEVICE
769	help
770	  Say Y here if you want to enable support for Samsung S6E63M0
771	  AMOLED LCD panel. This panel can be accessed using SPI or
772	  DSI.
773
774config DRM_PANEL_SAMSUNG_S6E63M0_SPI
775	tristate "Samsung S6E63M0 RGB SPI interface"
776	depends on SPI
777	depends on DRM_PANEL_SAMSUNG_S6E63M0
778	default DRM_PANEL_SAMSUNG_S6E63M0
779	select DRM_MIPI_DBI
780	help
781	  Say Y here if you want to be able to access the Samsung
782	  S6E63M0 panel using SPI.
783
784config DRM_PANEL_SAMSUNG_S6E63M0_DSI
785	tristate "Samsung S6E63M0 RGB DSI interface"
786	depends on DRM_MIPI_DSI
787	depends on DRM_PANEL_SAMSUNG_S6E63M0
788	help
789	  Say Y here if you want to be able to access the Samsung
790	  S6E63M0 panel using DSI.
791
792config DRM_PANEL_SAMSUNG_S6E8AA0
793	tristate "Samsung S6E8AA0 DSI video mode panel"
794	depends on OF
795	select DRM_MIPI_DSI
796	select VIDEOMODE_HELPERS
797
798config DRM_PANEL_SAMSUNG_SOFEF00
799	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
800	depends on OF
801	depends on DRM_MIPI_DSI
802	depends on BACKLIGHT_CLASS_DEVICE
803	select VIDEOMODE_HELPERS
804	help
805	  Say Y or M here if you want to enable support for the Samsung AMOLED
806	  command mode panels found in the OnePlus 6/6T smartphones.
807
808	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
809
810config DRM_PANEL_SEIKO_43WVF1G
811	tristate "Seiko 43WVF1G panel"
812	depends on OF
813	depends on BACKLIGHT_CLASS_DEVICE
814	select VIDEOMODE_HELPERS
815	help
816	  Say Y here if you want to enable support for the Seiko
817	  43WVF1G controller for 800x480 LCD panels
818
819config DRM_PANEL_SHARP_LQ101R1SX01
820	tristate "Sharp LQ101R1SX01 panel"
821	depends on OF
822	depends on DRM_MIPI_DSI
823	depends on BACKLIGHT_CLASS_DEVICE
824	help
825	  Say Y here if you want to enable support for Sharp LQ101R1SX01
826	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
827	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
828	  the host and has a built-in LED backlight.
829
830	  To compile this driver as a module, choose M here: the module
831	  will be called panel-sharp-lq101r1sx01.
832
833config DRM_PANEL_SHARP_LS037V7DW01
834	tristate "Sharp LS037V7DW01 VGA LCD panel"
835	depends on GPIOLIB && OF && REGULATOR
836	help
837	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
838	  (480x640) LCD panel (found on the TI SDP3430 board).
839
840config DRM_PANEL_SHARP_LS043T1LE01
841	tristate "Sharp LS043T1LE01 qHD video mode panel"
842	depends on OF
843	depends on DRM_MIPI_DSI
844	depends on BACKLIGHT_CLASS_DEVICE
845	help
846	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
847	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
848
849config DRM_PANEL_SHARP_LS060T1SX01
850	tristate "Sharp LS060T1SX01 FullHD video mode panel"
851	depends on OF
852	depends on DRM_MIPI_DSI
853	depends on BACKLIGHT_CLASS_DEVICE
854	help
855	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
856	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
857	  Bundle.
858
859config DRM_PANEL_SITRONIX_ST7701
860	tristate "Sitronix ST7701 panel driver"
861	depends on OF
862	depends on SPI || DRM_MIPI_DSI
863	select DRM_MIPI_DBI if SPI
864	depends on BACKLIGHT_CLASS_DEVICE
865	help
866	  Say Y here if you want to enable support for the Sitronix
867	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
868	  system interfaces.
869
870config DRM_PANEL_SITRONIX_ST7703
871	tristate "Sitronix ST7703 based MIPI touchscreen panels"
872	depends on OF
873	depends on DRM_MIPI_DSI
874	depends on BACKLIGHT_CLASS_DEVICE
875	help
876	  Say Y here if you want to enable support for Sitronix ST7703 based
877	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
878	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
879	  in backlight and touch controller.
880	  Touch input support is provided by the goodix driver and needs to be
881	  selected separately.
882
883config DRM_PANEL_SITRONIX_ST7789V
884	tristate "Sitronix ST7789V panel"
885	depends on OF && SPI
886	depends on BACKLIGHT_CLASS_DEVICE
887	help
888	  Say Y here if you want to enable support for the Sitronix
889	  ST7789V controller for 240x320 LCD panels
890
891config DRM_PANEL_SONY_ACX565AKM
892	tristate "Sony ACX565AKM panel"
893	depends on GPIOLIB && OF && SPI
894	depends on BACKLIGHT_CLASS_DEVICE
895	help
896	  Say Y here if you want to enable support for the Sony ACX565AKM
897	  800x600 3.5" panel (found on the Nokia N900).
898
899config DRM_PANEL_SONY_TD4353_JDI
900	tristate "Sony TD4353 JDI panel"
901	depends on GPIOLIB && OF
902	depends on DRM_MIPI_DSI
903	depends on BACKLIGHT_CLASS_DEVICE
904	help
905	  Say Y here if you want to enable support for the Sony Tama
906	  TD4353 JDI command mode panel as found on some Sony Xperia
907	  XZ2 and XZ2 Compact smartphones.
908
909config DRM_PANEL_SONY_TULIP_TRULY_NT35521
910	tristate "Sony Tulip Truly NT35521 panel"
911	depends on GPIOLIB && OF
912	depends on DRM_MIPI_DSI
913	depends on BACKLIGHT_CLASS_DEVICE
914	help
915	  Say Y here if you want to enable support for the Sony Tulip
916	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
917	  Aqua phone.
918
919config DRM_PANEL_STARTEK_KD070FHFID015
920	tristate "STARTEK KD070FHFID015 panel"
921	depends on OF
922	depends on DRM_MIPI_DSI
923	depends on BACKLIGHT_CLASS_DEVICE
924	help
925	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
926	  based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
927	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
928	  the host, a built-in LED backlight and touch controller.
929
930config DRM_PANEL_EDP
931	tristate "support for simple Embedded DisplayPort panels"
932	depends on OF
933	depends on BACKLIGHT_CLASS_DEVICE
934	depends on PM
935	select VIDEOMODE_HELPERS
936	select DRM_DISPLAY_DP_HELPER
937	select DRM_DISPLAY_HELPER
938	select DRM_DISPLAY_DP_AUX_BUS
939	select DRM_KMS_HELPER
940	help
941	  DRM panel driver for dumb eDP panels that need at most a regulator and
942	  a GPIO to be powered up. Optionally a backlight can be attached so
943	  that it can be automatically turned off when the panel goes into a
944	  low power state.
945
946config DRM_PANEL_SIMPLE
947	tristate "support for simple panels (other than eDP ones)"
948	depends on OF
949	depends on BACKLIGHT_CLASS_DEVICE
950	depends on PM
951	select VIDEOMODE_HELPERS
952	help
953	  DRM panel driver for dumb non-eDP panels that need at most a regulator
954	  and a GPIO to be powered up. Optionally a backlight can be attached so
955	  that it can be automatically turned off when the panel goes into a
956	  low power state.
957
958config DRM_PANEL_SUMMIT
959	tristate "Apple Summit display panel"
960	depends on OF
961	depends on DRM_MIPI_DSI
962	depends on BACKLIGHT_CLASS_DEVICE
963	help
964	  Say Y if you want to enable support for the "Summit" display panel
965	  used as a touchbar on certain Apple laptops.
966
967config DRM_PANEL_SYNAPTICS_R63353
968	tristate "Synaptics R63353-based panels"
969	depends on OF
970	depends on DRM_MIPI_DSI
971	depends on BACKLIGHT_CLASS_DEVICE
972	help
973	  Say Y if you want to enable support for panels based on the
974	  Synaptics R63353 controller.
975
976config DRM_PANEL_TDO_TL070WSH30
977	tristate "TDO TL070WSH30 DSI panel"
978	depends on OF
979	depends on DRM_MIPI_DSI
980	depends on BACKLIGHT_CLASS_DEVICE
981	help
982	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
983	  panel module. The panel has a 1024×600 resolution and uses
984	  24 bit RGB per pixel. It provides a MIPI DSI interface to
985	  the host, a built-in LED backlight and touch controller.
986
987config DRM_PANEL_TPO_TD028TTEC1
988	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
989	depends on OF && SPI
990	depends on BACKLIGHT_CLASS_DEVICE
991	help
992	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
993	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
994
995config DRM_PANEL_TPO_TD043MTEA1
996	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
997	depends on GPIOLIB && OF && REGULATOR && SPI
998	help
999	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1000	  4.3" panel (found on the OMAP3 Pandora board).
1001
1002config DRM_PANEL_TPO_TPG110
1003	tristate "TPO TPG 800x400 panel"
1004	depends on OF && SPI && GPIOLIB
1005	depends on BACKLIGHT_CLASS_DEVICE
1006	help
1007	  Say Y here if you want to enable support for TPO TPG110
1008	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
1009	  800x400 LCD panels.
1010
1011config DRM_PANEL_TRULY_NT35597_WQXGA
1012	tristate "Truly WQXGA"
1013	depends on OF
1014	depends on DRM_MIPI_DSI
1015	help
1016	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1017	  Video Mode panel
1018
1019config DRM_PANEL_VISIONOX_G2647FB105
1020	tristate "Visionox G2647FB105"
1021	depends on OF
1022	depends on DRM_MIPI_DSI
1023	depends on BACKLIGHT_CLASS_DEVICE
1024	help
1025	  Say Y here if you want to enable support for the Visionox
1026	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1027
1028config DRM_PANEL_VISIONOX_R66451
1029	tristate "Visionox R66451"
1030	depends on OF
1031	depends on DRM_MIPI_DSI
1032	depends on BACKLIGHT_CLASS_DEVICE
1033	select DRM_DISPLAY_DSC_HELPER
1034	select DRM_DISPLAY_HELPER
1035	help
1036	  Say Y here if you want to enable support for Visionox
1037	  R66451 1080x2340 AMOLED DSI panel.
1038
1039config DRM_PANEL_VISIONOX_RM69299
1040	tristate "Visionox RM69299"
1041	depends on OF
1042	depends on DRM_MIPI_DSI
1043	help
1044	  Say Y here if you want to enable support for Visionox
1045	  RM69299  DSI Video Mode panel.
1046
1047config DRM_PANEL_VISIONOX_RM692E5
1048	tristate "Visionox RM692E5"
1049	depends on OF
1050	depends on DRM_MIPI_DSI
1051	depends on BACKLIGHT_CLASS_DEVICE
1052	select DRM_DISPLAY_DSC_HELPER
1053	select DRM_DISPLAY_HELPER
1054	help
1055	  Say Y here if you want to enable support for Visionox RM692E5 amoled
1056	  display panels, such as the one found in the Nothing Phone (1)
1057	  smartphone.
1058
1059config DRM_PANEL_VISIONOX_VTDR6130
1060	tristate "Visionox VTDR6130"
1061	depends on OF
1062	depends on DRM_MIPI_DSI
1063	depends on BACKLIGHT_CLASS_DEVICE
1064	help
1065	  Say Y here if you want to enable support for Visionox
1066	  VTDR6130 1080x2400 AMOLED DSI panel.
1067
1068config DRM_PANEL_WIDECHIPS_WS2401
1069	tristate "Widechips WS2401 DPI panel driver"
1070	depends on SPI && GPIOLIB
1071	depends on BACKLIGHT_CLASS_DEVICE
1072	select DRM_MIPI_DBI
1073	help
1074	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1075	  480x800 display controller used in panels such as Samsung LMS380KF01.
1076	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1077
1078config DRM_PANEL_XINPENG_XPP055C272
1079	tristate "Xinpeng XPP055C272 panel driver"
1080	depends on OF
1081	depends on DRM_MIPI_DSI
1082	depends on BACKLIGHT_CLASS_DEVICE
1083	help
1084	  Say Y here if you want to enable support for the Xinpeng
1085	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1086	  system interfaces.
1087endmenu
1088