xref: /linux/drivers/gpu/drm/panel/Kconfig (revision 1190fc8d7b8a9cebea8dcbd2e544e43990ae81d0) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ANBERNIC_TD4310
21	tristate "Anbernic TD4310 LCD panel"
22	depends on GPIOLIB && OF
23	depends on DRM_MIPI_DSI
24	depends on BACKLIGHT_CLASS_DEVICE
25	help
26	  Say Y here to enable support for Anbernic designed panels with the
27	  TD4310 panel controller such as the ones used on the Anbernic RG
28	  Vita Pro.
29
30config DRM_PANEL_ARM_VERSATILE
31	tristate "ARM Versatile panel driver"
32	depends on OF
33	depends on MFD_SYSCON
34	select VIDEOMODE_HELPERS
35	help
36	  This driver supports the ARM Versatile panels connected to ARM
37	  reference designs. The panel is detected using special registers
38	  in the Versatile family syscon registers.
39
40config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
41	tristate "ASUS Z00T TM5P5 NT35596 panel"
42	depends on GPIOLIB && OF
43	depends on DRM_MIPI_DSI
44	depends on BACKLIGHT_CLASS_DEVICE
45	help
46	  Say Y here if you want to enable support for the ASUS TMP5P5
47	  NT35596 1080x1920 video mode panel as found in some Asus
48	  Zenfone 2 Laser Z00T devices.
49
50config DRM_PANEL_AUO_A030JTN01
51	tristate "AUO A030JTN01"
52	depends on SPI
53	select REGMAP_SPI
54	help
55	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
56	  as found in the YLM RS-97 handheld gaming console.
57
58config DRM_PANEL_BOE_BF060Y8M_AJ0
59	tristate "Boe BF060Y8M-AJ0 panel"
60	depends on OF
61	depends on DRM_MIPI_DSI
62	depends on BACKLIGHT_CLASS_DEVICE
63	help
64	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
65	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
66	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
67	  the host and backlight is controlled through DSI commands.
68
69config DRM_PANEL_BOE_HIMAX8279D
70	tristate "Boe Himax8279d panel"
71	depends on OF
72	depends on DRM_MIPI_DSI
73	depends on BACKLIGHT_CLASS_DEVICE
74	help
75	  Say Y here if you want to enable support for Boe Himax8279d
76	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
77	  24 bit RGB per pixel. It provides a MIPI DSI interface to
78	  the host and has a built-in LED backlight.
79
80config DRM_PANEL_BOE_TD4320
81	tristate "BOE TD4320 DSI panel"
82	depends on OF
83	depends on DRM_MIPI_DSI
84	depends on BACKLIGHT_CLASS_DEVICE
85	help
86	  Say Y here if you want to enable support for BOE TD4320 1080x2340
87	  video mode panel found in Xiaomi Redmi Note 7 smartphones.
88
89config DRM_PANEL_BOE_TH101MB31UIG002_28A
90	tristate "Boe TH101MB31UIG002-28A panel"
91	depends on OF
92	depends on DRM_MIPI_DSI
93	depends on BACKLIGHT_CLASS_DEVICE
94	help
95	  Say Y here if you want to enable support for Boe
96	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
97	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
98	  interface to the host and has a built-in LED backlight.
99
100config DRM_PANEL_BOE_TV101WUM_NL6
101	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
102	depends on OF
103	depends on DRM_MIPI_DSI
104	depends on BACKLIGHT_CLASS_DEVICE
105	help
106	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
107	  45NA WUXGA PANEL DSI Video Mode panel
108
109config DRM_PANEL_BOE_TV101WUM_LL2
110	tristate "BOE TV101WUM LL2 1200x1920 panel"
111	depends on OF
112	depends on DRM_MIPI_DSI
113	depends on BACKLIGHT_CLASS_DEVICE
114	help
115	  Say Y here if you want to support for BOE TV101WUM-LL2
116	  WUXGA PANEL DSI Video Mode panel
117
118config DRM_PANEL_CHIPONE_ICNA35XX
119	tristate "Chipone ICNA35XX panel driver"
120	depends on OF
121	depends on DRM_MIPI_DSI
122	depends on BACKLIGHT_CLASS_DEVICE
123	select DRM_DISPLAY_HELPER
124	help
125	  Say Y here if you want to enable support for the panels built
126	  around the Chipone ICNA3512 and ICNA3520 display controllers,
127	  such as some Tianma panels used in AYN Odin2 Portal and Thor.
128
129config DRM_PANEL_CHIPWEALTH_CH13726A
130	tristate "CHIPWEALTH CH13726A-based DSI panel"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	select DRM_DISPLAY_DP_HELPER
135	select DRM_DISPLAY_HELPER
136	help
137	  Say Y here if you want to enable support for ChipWealth
138	  CH13726A-based display panels.
139
140config DRM_PANEL_EBBG_FT8719
141	tristate "EBBG FT8719 panel driver"
142	depends on GPIOLIB
143	depends on OF
144	depends on DRM_MIPI_DSI
145	depends on BACKLIGHT_CLASS_DEVICE
146	help
147	  Say Y here if you want to enable support for the EBBG FT8719
148	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
149	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
150	  interface to the host.
151
152config DRM_PANEL_ELIDA_KD35T133
153	tristate "Elida KD35T133 panel driver"
154	depends on OF
155	depends on DRM_MIPI_DSI
156	depends on BACKLIGHT_CLASS_DEVICE
157	help
158	  Say Y here if you want to enable support for the Elida
159	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
160	  system interfaces.
161
162config DRM_PANEL_FEIXIN_K101_IM2BA02
163	tristate "Feixin K101 IM2BA02 panel"
164	depends on OF
165	depends on DRM_MIPI_DSI
166	depends on BACKLIGHT_CLASS_DEVICE
167	help
168	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
169	  4-lane 800x1280 MIPI DSI panel.
170
171config DRM_PANEL_FEIYANG_FY07024DI26A30D
172	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
173	depends on OF
174	depends on DRM_MIPI_DSI
175	depends on BACKLIGHT_CLASS_DEVICE
176	help
177	  Say Y if you want to enable support for panels based on the
178	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
179
180config DRM_PANEL_FOCALTECH_OTA7290B
181	tristate "Focaltech OTA7290B"
182	depends on DRM_MIPI_DSI
183	depends on I2C
184	depends on BACKLIGHT_CLASS_DEVICE
185	select DRM_KMS_HELPER
186	help
187	  Enable support for panels using OTA7290B as a controller (for
188	  example, Waveshare 12.3" DSI TOUCH-A panel). Say Y here if you want
189	  to enable support for this panel. To compile this driver as a module,
190	  choose M here.
191
192config DRM_PANEL_DSI_CM
193	tristate "Generic DSI command mode panels"
194	depends on OF
195	depends on DRM_MIPI_DSI
196	depends on BACKLIGHT_CLASS_DEVICE
197	help
198	  DRM panel driver for DSI command mode panels with support for
199	  embedded and external backlights.
200
201config DRM_PANEL_LVDS
202	tristate "Generic LVDS panel driver"
203	depends on OF
204	depends on BACKLIGHT_CLASS_DEVICE
205	select VIDEOMODE_HELPERS
206	help
207	  This driver supports LVDS panels that don't require device-specific
208	  handling of power supplies or control signals. It implements automatic
209	  backlight handling if the panel is attached to a backlight controller.
210
211config DRM_PANEL_HIMAX_HX8279
212	tristate "Himax HX8279-based panels"
213	depends on OF
214	depends on DRM_MIPI_DSI
215	depends on BACKLIGHT_CLASS_DEVICE
216	help
217	  Say Y if you want to enable support for panels based on the
218	  Himax HX8279 controller, such as the Startek KD070FHFID078
219	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
220	  and others.
221
222config DRM_PANEL_HIMAX_HX83102
223	tristate "Himax HX83102-based panels"
224	depends on OF
225	depends on DRM_MIPI_DSI
226	depends on BACKLIGHT_CLASS_DEVICE
227	help
228	  Say Y if you want to enable support for panels based on the
229	  Himax HX83102 controller.
230
231config DRM_PANEL_HIMAX_HX83112A
232	tristate "Himax HX83112A-based DSI panel"
233	depends on OF
234	depends on DRM_MIPI_DSI
235	depends on BACKLIGHT_CLASS_DEVICE
236	select DRM_KMS_HELPER
237	help
238	  Say Y here if you want to enable support for Himax HX83112A-based
239	  display panels, such as the one found in the Fairphone 4 smartphone.
240
241config DRM_PANEL_HIMAX_HX83112B
242	tristate "Himax HX83112B-based DSI panel"
243	depends on OF
244	depends on DRM_MIPI_DSI
245	depends on BACKLIGHT_CLASS_DEVICE
246	select DRM_KMS_HELPER
247	help
248	  Say Y here if you want to enable support for Himax HX83112B-based
249	  display panels, such as the one found in the Fairphone 3 smartphone.
250
251config DRM_PANEL_HIMAX_HX83121A
252	tristate "Himax HX83121A-based DSI panel"
253	depends on OF
254	depends on DRM_MIPI_DSI
255	depends on BACKLIGHT_CLASS_DEVICE
256	select DRM_DISPLAY_DSC_HELPER
257	select DRM_KMS_HELPER
258	help
259	  Say Y here if you want to enable support for Himax HX83121A-based
260	  display panels, such as the one found in the HUAWEI Matebook E Go
261          series.
262
263config DRM_PANEL_HIMAX_HX8394
264	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
265	depends on OF
266	depends on DRM_MIPI_DSI
267	depends on BACKLIGHT_CLASS_DEVICE
268	help
269	  Say Y if you want to enable support for panels based on the
270	  Himax HX8394 controller, such as the HannStar HSD060BHW4
271	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
272
273	  If M is selected the module will be called panel-himax-hx8394.
274
275config DRM_PANEL_HYDIS_HV101HD1
276	tristate "Hydis HV101HD1 panel"
277	depends on OF
278	depends on DRM_MIPI_DSI
279	depends on BACKLIGHT_CLASS_DEVICE
280	help
281	  Say Y here if you want to enable support for the Hydis HV101HD1
282	  2-lane 1366x768 MIPI DSI panel found in ASUS VivoTab RT TF600T.
283	  HV101HD1 is a color active matrix TFT LCD module using amorphous
284	  silicon TFT's (Thin Film Transistors) as an active switching devices.
285
286	  If M is selected the module will be called panel-hydis-hv101hd1
287
288config DRM_PANEL_ILITEK_ILI7807S
289	tristate "Ilitek ILI7807S-based panels"
290	depends on OF
291	depends on DRM_MIPI_DSI
292	depends on BACKLIGHT_CLASS_DEVICE
293	help
294	  Say Y if you want to enable support for panels based on the
295	  Ilitek ILI7807S display controller, such as the DLC DLC0697
296	  1080x1920 MIPI DSI panel.
297
298	  If M is selected the module will be called panel-ilitek-ili7807s.
299
300config DRM_PANEL_ILITEK_IL9322
301	tristate "Ilitek ILI9322 320x240 QVGA panels"
302	depends on OF && SPI
303	select REGMAP
304	help
305	  Say Y here if you want to enable support for Ilitek IL9322
306	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
307
308config DRM_PANEL_ILITEK_ILI9341
309	tristate "Ilitek ILI9341 240x320 QVGA panels"
310	depends on SPI
311	select DRM_KMS_HELPER
312	select DRM_GEM_DMA_HELPER
313	depends on BACKLIGHT_CLASS_DEVICE
314	select DRM_MIPI_DBI
315	help
316	  Say Y here if you want to enable support for Ilitek IL9341
317	  QVGA (240x320) RGB panels. support serial & parallel rgb
318	  interface.
319
320config DRM_PANEL_ILITEK_ILI9488
321	tristate "Ilitek ILI9488-based panels"
322	depends on OF
323	depends on DRM_MIPI_DSI
324	depends on BACKLIGHT_CLASS_DEVICE
325	help
326	  Say Y if you want to enable support for panels based on the
327	  Ilitek ILI9488 controller.
328
329config DRM_PANEL_ILITEK_ILI9805
330	tristate "Ilitek ILI9805-based panels"
331	depends on OF
332	depends on DRM_MIPI_DSI
333	depends on BACKLIGHT_CLASS_DEVICE
334	help
335	  Say Y if you want to enable support for panels based on the
336	  Ilitek ILI9805 controller.
337
338config DRM_PANEL_ILITEK_ILI9806E_CORE
339	tristate
340
341config DRM_PANEL_ILITEK_ILI9806E_DSI
342	tristate "Ilitek ILI9806E-based DSI panels"
343	depends on OF
344	depends on DRM_MIPI_DSI
345	depends on BACKLIGHT_CLASS_DEVICE
346	select DRM_PANEL_ILITEK_ILI9806E_CORE
347	help
348	  Say Y if you want to enable support for panels based on the
349	  Ilitek ILI9806E controller using DSI.
350
351config DRM_PANEL_ILITEK_ILI9806E_SPI
352	tristate "Ilitek ILI9806E-based RGB SPI panel"
353	depends on OF
354	depends on SPI
355	depends on BACKLIGHT_CLASS_DEVICE
356	select DRM_MIPI_DBI
357	select VIDEOMODE_HELPERS
358	select DRM_PANEL_ILITEK_ILI9806E_CORE
359	help
360	  Say Y if you want to enable support for panels based on the
361	  Ilitek ILI9806E controller using SPI.
362
363config DRM_PANEL_ILITEK_ILI9881C
364	tristate "Ilitek ILI9881C-based panels"
365	depends on OF
366	depends on DRM_MIPI_DSI
367	depends on BACKLIGHT_CLASS_DEVICE
368	help
369	  Say Y if you want to enable support for panels based on the
370	  Ilitek ILI9881c controller.
371
372config DRM_PANEL_ILITEK_ILI9882T
373	tristate "Ilitek ILI9882t-based panels"
374	depends on OF
375	depends on DRM_MIPI_DSI
376	depends on BACKLIGHT_CLASS_DEVICE
377	select DRM_DISPLAY_DSC_HELPER
378	help
379	  Say Y if you want to enable support for panels based on the
380	  Ilitek ILI9882t controller.
381
382config DRM_PANEL_INNOLUX_EJ030NA
383        tristate "Innolux EJ030NA 320x480 LCD panel"
384        depends on OF && SPI
385        select REGMAP_SPI
386        help
387          Say Y here to enable support for the Innolux/Chimei EJ030NA
388          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
389          and LDK handheld gaming consoles.
390
391config DRM_PANEL_INNOLUX_P079ZCA
392	tristate "Innolux P079ZCA panel"
393	depends on OF
394	depends on DRM_MIPI_DSI
395	depends on BACKLIGHT_CLASS_DEVICE
396	help
397	  Say Y here if you want to enable support for Innolux P079ZCA
398	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
399	  24 bit RGB per pixel. It provides a MIPI DSI interface to
400	  the host and has a built-in LED backlight.
401
402config DRM_PANEL_JADARD_JD9365DA_H3
403	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
404	depends on OF
405	depends on DRM_MIPI_DSI
406	depends on BACKLIGHT_CLASS_DEVICE
407	select DRM_KMS_HELPER
408	help
409	  Say Y here if you want to enable support for Jadard JD9365DA-H3
410	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
411	  800RGBx1280 dots at maximum.
412
413config DRM_PANEL_JDI_LPM102A188A
414	tristate "JDI LPM102A188A DSI panel"
415	depends on GPIOLIB
416	depends on OF
417	depends on DRM_MIPI_DSI
418	depends on BACKLIGHT_CLASS_DEVICE
419	help
420	  Say Y here if you want to enable support for JDI LPM102A188A DSI
421	  command mode panel as found in Google Pixel C devices.
422	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
423	  to the host.
424
425config DRM_PANEL_JDI_LT070ME05000
426	tristate "JDI LT070ME05000 WUXGA DSI panel"
427	depends on OF
428	depends on DRM_MIPI_DSI
429	depends on BACKLIGHT_CLASS_DEVICE
430	help
431	  Say Y here if you want to enable support for JDI DSI video mode
432	  panel as found in Google Nexus 7 (2013) devices.
433	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
434	  24 bit per pixel.
435
436config DRM_PANEL_JDI_R63452
437	tristate "JDI R63452 Full HD DSI panel"
438	depends on OF
439	depends on DRM_MIPI_DSI
440	depends on BACKLIGHT_CLASS_DEVICE
441	help
442	  Say Y here if you want to enable support for the JDI R63452
443	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
444
445config DRM_PANEL_KHADAS_TS050
446	tristate "Khadas TS050 panel"
447	depends on OF
448	depends on DRM_MIPI_DSI
449	depends on BACKLIGHT_CLASS_DEVICE
450	help
451	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
452	  panel module. The panel has a 1080x1920 resolution and uses
453	  24 bit RGB per pixel. It provides a MIPI DSI interface to
454	  the host, a built-in LED backlight and touch controller.
455
456config DRM_PANEL_KINGDISPLAY_KD097D04
457	tristate "Kingdisplay kd097d04 panel"
458	depends on OF
459	depends on DRM_MIPI_DSI
460	depends on BACKLIGHT_CLASS_DEVICE
461	help
462	  Say Y here if you want to enable support for Kingdisplay kd097d04
463	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
464	  24 bit RGB per pixel. It provides a MIPI DSI interface to
465	  the host and has a built-in LED backlight.
466
467config DRM_PANEL_LEADTEK_LTK050H3146W
468	tristate "Leadtek LTK050H3146W panel"
469	depends on OF
470	depends on DRM_MIPI_DSI
471	depends on BACKLIGHT_CLASS_DEVICE
472	help
473	  Say Y here if you want to enable support for Leadtek LTK050H3146W
474	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
475	  24 bit RGB per pixel. It provides a MIPI DSI interface to
476	  the host and has a built-in LED backlight.
477
478config DRM_PANEL_LEADTEK_LTK500HD1829
479	tristate "Leadtek LTK500HD1829 panel"
480	depends on OF
481	depends on DRM_MIPI_DSI
482	depends on BACKLIGHT_CLASS_DEVICE
483	help
484	  Say Y here if you want to enable support for Kingdisplay kd097d04
485	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
486	  24 bit RGB per pixel. It provides a MIPI DSI interface to
487	  the host and has a built-in LED backlight.
488
489config DRM_PANEL_LINCOLNTECH_LCD197
490	tristate "Lincoln Technologies lcd197 panel"
491	depends on OF
492	depends on DRM_MIPI_DSI
493	depends on BACKLIGHT_CLASS_DEVICE
494	help
495	  Say Y here if you want to enable support for lincolntech lcd197
496	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
497	  24 bit RGB per pixel. It provides a MIPI DSI interface to
498	  the host.
499
500config DRM_PANEL_LG_LB035Q02
501	tristate "LG LB035Q024573 RGB panel"
502	depends on GPIOLIB && OF && SPI
503	help
504	  Say Y here if you want to enable support for the LB035Q02 RGB panel
505	  (found on the Gumstix Overo Palo35 board). To compile this driver as
506	  a module, choose M here.
507
508config DRM_PANEL_LG_LD070WX3
509	tristate "LG LD070WX3 MIPI DSI panel"
510	depends on OF
511	depends on DRM_MIPI_DSI
512	depends on BACKLIGHT_CLASS_DEVICE
513	select VIDEOMODE_HELPERS
514	help
515	  Say Y here if you want to enable support for the LD070WX3 MIPI DSI
516	  panel found in the NVIDIA Tegra Note 7 tablet.
517
518	  To compile this driver as a module, choose M here: the module will
519	  be called panel-lg-ld070wx3.
520
521config DRM_PANEL_LG_LG4573
522	tristate "LG4573 RGB/SPI panel"
523	depends on OF && SPI
524	select VIDEOMODE_HELPERS
525	help
526	  Say Y here if you want to enable support for LG4573 RGB panel.
527	  To compile this driver as a module, choose M here.
528
529config DRM_PANEL_LG_SW43408
530	tristate "LG SW43408 panel"
531	depends on GPIOLIB
532	depends on OF
533	depends on DRM_MIPI_DSI
534	depends on BACKLIGHT_CLASS_DEVICE
535	select DRM_DISPLAY_DSC_HELPER
536	select DRM_DISPLAY_HELPER
537	help
538	  Say Y here if you want to enable support for LG sw43408 panel.
539	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
540	  pixel. It provides a MIPI DSI interface to the host and has a
541	  built-in LED backlight.
542
543config DRM_PANEL_LXD_M9189A
544	tristate "LXD M9189A MIPI-DSI LCD panel"
545	depends on OF
546	depends on DRM_MIPI_DSI
547	depends on BACKLIGHT_CLASS_DEVICE
548	help
549	  Say Y if you want to enable support for the LXD M9189A 4-Lane
550	  1024x600 MIPI DSI panel.
551
552config DRM_PANEL_MAGNACHIP_D53E6EA8966
553	tristate "Magnachip D53E6EA8966 DSI panel"
554	depends on OF && SPI
555	depends on DRM_MIPI_DSI
556	depends on BACKLIGHT_CLASS_DEVICE
557	select DRM_MIPI_DBI
558	help
559	  DRM panel driver for the Samsung AMS495QA01 panel controlled
560	  with the Magnachip D53E6EA8966 panel IC. This panel receives
561	  video data via DSI but commands via 9-bit SPI using DBI.
562
563config DRM_PANEL_MANTIX_MLAF057WE51
564	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
565	depends on OF
566	depends on DRM_MIPI_DSI
567	depends on BACKLIGHT_CLASS_DEVICE
568	help
569	  Say Y here if you want to enable support for the Mantix
570	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
571	  has a resolution of 720x1440 pixels, a built in backlight and touch
572	  controller.
573
574config DRM_PANEL_MOTOROLA_MOT
575	tristate "Atrix 4G and Droid X2 540x960 DSI video mode panel"
576	depends on OF
577	depends on DRM_MIPI_DSI
578	depends on BACKLIGHT_CLASS_DEVICE
579	select VIDEOMODE_HELPERS
580	help
581	  Say Y here if you want to enable support for the LCD panel module
582	  for Motorola Atrix 4G or Droid X2. Exact panel vendor and model are
583	  unknown. The panel has a 540x960 resolution and uses 24 bit RGB per
584	  pixel.
585
586config DRM_PANEL_NEC_NL8048HL11
587	tristate "NEC NL8048HL11 RGB panel"
588	depends on GPIOLIB && OF && SPI
589	help
590	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
591	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
592	  as a module, choose M here.
593
594config DRM_PANEL_NEWVISION_NV3051D
595	tristate "NewVision NV3051D DSI panel"
596	depends on OF
597	depends on DRM_MIPI_DSI
598	depends on BACKLIGHT_CLASS_DEVICE
599	help
600	  This driver supports the NV3051D based panel found on the Anbernic
601	  RG353P and RG353V.
602
603config DRM_PANEL_NEWVISION_NV3052C
604	tristate "NewVision NV3052C RGB/SPI panel"
605	depends on OF && SPI
606	depends on BACKLIGHT_CLASS_DEVICE
607	select DRM_MIPI_DBI
608	help
609	  Say Y here if you want to enable support for the panels built
610	  around the NewVision NV3052C display controller.
611
612config DRM_PANEL_NOVATEK_NT35510
613	tristate "Novatek NT35510 RGB panel driver"
614	depends on OF
615	depends on DRM_MIPI_DSI
616	depends on BACKLIGHT_CLASS_DEVICE
617	help
618	  Say Y here if you want to enable support for the panels built
619	  around the Novatek NT35510 display controller, such as some
620	  Hydis panels.
621
622config DRM_PANEL_NOVATEK_NT35532
623	tristate "Novatek NT35532-based DSI video mode panel"
624	depends on OF
625	depends on DRM_MIPI_DSI
626	depends on BACKLIGHT_CLASS_DEVICE
627	select DRM_KMS_HELPER
628	help
629	  Say Y or M here if you want to enable support for Novatek
630	  NT35532-based 1080p video mode DSI panels.
631
632config DRM_PANEL_NOVATEK_NT35560
633	tristate "Novatek NT35560 DSI command mode panel"
634	depends on OF
635	depends on DRM_MIPI_DSI
636	depends on BACKLIGHT_CLASS_DEVICE
637	select VIDEOMODE_HELPERS
638	help
639	  Say Y here if you want to enable the Novatek NT35560 display
640	  controller. This panel supports DSI in both command and video
641	  mode. This supports several panels such as Sony ACX424AKM and
642	  ACX424AKP.
643
644config DRM_PANEL_NOVATEK_NT35950
645	tristate "Novatek NT35950 DSI panel"
646	depends on OF
647	depends on DRM_MIPI_DSI
648	depends on BACKLIGHT_CLASS_DEVICE
649	help
650	  Say Y here if you want to enable support for the panels built
651	  around the Novatek NT35950 display controller, such as some
652	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
653	  mobile phones.
654
655config DRM_PANEL_NOVATEK_NT36523
656	tristate "Novatek NT36523 panel driver"
657	depends on OF
658	depends on DRM_MIPI_DSI
659	depends on BACKLIGHT_CLASS_DEVICE
660	help
661	  Say Y here if you want to enable support for the panels built
662	  around the Novatek NT36523 display controller, such as some
663	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
664
665config DRM_PANEL_NOVATEK_NT36672A
666	tristate "Novatek NT36672A DSI panel"
667	depends on GPIOLIB
668	depends on OF
669	depends on DRM_MIPI_DSI
670	depends on BACKLIGHT_CLASS_DEVICE
671	help
672	  Say Y here if you want to enable support for the panels built
673	  around the Novatek NT36672A display controller, such as some
674	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
675
676config DRM_PANEL_NOVATEK_NT36672E
677	tristate "Novatek NT36672E DSI panel"
678	depends on GPIOLIB
679	depends on OF
680	depends on DRM_MIPI_DSI
681	depends on BACKLIGHT_CLASS_DEVICE
682	help
683	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
684	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
685	  RGB per pixel.
686
687config DRM_PANEL_NOVATEK_NT37700F
688	tristate "Novatek NT37700F DSI panel"
689	depends on OF
690	depends on DRM_MIPI_DSI
691	depends on BACKLIGHT_CLASS_DEVICE
692	help
693	  Say Y here if you want to enable support for Novatek NT37700F DSI
694	  panel module. The panel has a resolution of 1080x2160.
695
696config DRM_PANEL_NOVATEK_NT37801
697	tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
698	depends on OF
699	depends on DRM_MIPI_DSI
700	depends on BACKLIGHT_CLASS_DEVICE
701	select DRM_DISPLAY_DSC_HELPER
702	select DRM_DISPLAY_HELPER
703	help
704	  Say Y here if you want to enable support for Novatek NT37801 (or
705	  NT37810) AMOLED DSI Video Mode LCD panel module with 1440x3200
706	  resolution.
707
708config DRM_PANEL_NOVATEK_NT39016
709	tristate "Novatek NT39016 RGB/SPI panel"
710	depends on OF && SPI
711	depends on BACKLIGHT_CLASS_DEVICE
712	select REGMAP_SPI
713	help
714	  Say Y here if you want to enable support for the panels built
715	  around the Novatek NT39016 display controller.
716
717config DRM_PANEL_OLIMEX_LCD_OLINUXINO
718	tristate "Olimex LCD-OLinuXino panel"
719	depends on OF
720	depends on I2C
721	depends on BACKLIGHT_CLASS_DEVICE
722	select CRC32
723	help
724	  The panel is used with different sizes LCDs, from 480x272 to
725	  1280x800, and 24 bit per pixel.
726
727	  Say Y here if you want to enable support for Olimex Ltd.
728	  LCD-OLinuXino panel.
729
730config DRM_PANEL_ORISETECH_OTA5601A
731        tristate "Orise Technology ota5601a RGB/SPI panel"
732        depends on SPI
733        depends on BACKLIGHT_CLASS_DEVICE
734        select REGMAP_SPI
735        help
736          Say Y here if you want to enable support for the panels built
737          around the Orise Technology OTA9601A display controller.
738
739config DRM_PANEL_ORISETECH_OTM8009A
740	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
741	depends on OF
742	depends on DRM_MIPI_DSI
743	depends on BACKLIGHT_CLASS_DEVICE
744	help
745	  Say Y here if you want to enable support for Orise Technology
746	  otm8009a 480x800 dsi 2dl panel.
747
748config DRM_PANEL_OSD_OSD101T2587_53TS
749	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
750	depends on OF
751	depends on DRM_MIPI_DSI
752	depends on BACKLIGHT_CLASS_DEVICE
753	help
754	  Say Y here if you want to enable support for One Stop Displays
755	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
756
757config DRM_PANEL_PANASONIC_VVX10F034N00
758	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
759	depends on OF
760	depends on DRM_MIPI_DSI
761	depends on BACKLIGHT_CLASS_DEVICE
762	help
763	  Say Y here if you want to enable support for Panasonic VVX10F034N00
764	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
765	  Xperia Z2 tablets
766
767config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
768	tristate "Raspberry Pi 7-inch touchscreen panel"
769	depends on DRM_MIPI_DSI
770	help
771	  Say Y here if you want to enable support for the Raspberry
772	  Pi 7" Touchscreen.  To compile this driver as a module,
773	  choose M here.
774
775config DRM_PANEL_RAYDIUM_RM67191
776	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
777	depends on OF
778	depends on DRM_MIPI_DSI
779	depends on BACKLIGHT_CLASS_DEVICE
780	help
781	  Say Y here if you want to enable support for Raydium RM67191 FHD
782	  (1080x1920) DSI panel.
783
784config DRM_PANEL_RAYDIUM_RM67200
785	tristate "Raydium RM67200-based DSI panel"
786	depends on OF
787	depends on DRM_MIPI_DSI
788	help
789	  Say Y here if you want to enable support for Raydium RM67200-based
790	  DSI video mode panels. This panel controller can be found in the
791	  Wanchanglong W552793BAA panel found on the Rockchip RK3588 EVB1
792	  evaluation boards.
793
794config DRM_PANEL_RAYDIUM_RM68200
795	tristate "Raydium RM68200 720x1280 DSI video mode panel"
796	depends on OF
797	depends on DRM_MIPI_DSI
798	depends on BACKLIGHT_CLASS_DEVICE
799	help
800	  Say Y here if you want to enable support for Raydium RM68200
801	  720x1280 DSI video mode panel.
802
803config DRM_PANEL_RAYDIUM_RM692E5
804	tristate "Raydium RM692E5-based DSI panel"
805	depends on OF
806	depends on DRM_MIPI_DSI
807	depends on BACKLIGHT_CLASS_DEVICE
808	select DRM_DISPLAY_DSC_HELPER
809	select DRM_DISPLAY_HELPER
810	help
811	  Say Y here if you want to enable support for Raydium RM692E5-based
812	  display panels, such as the one found in the Fairphone 5 smartphone.
813
814config DRM_PANEL_RAYDIUM_RM69380
815	tristate "Raydium RM69380-based DSI panel"
816	depends on GPIOLIB
817	depends on OF
818	depends on DRM_MIPI_DSI
819	depends on BACKLIGHT_CLASS_DEVICE
820	help
821	  Say Y here if you want to enable support for Raydium RM69380-based
822	  display panels.
823
824	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
825	  in combination with an EDO OLED panel.
826
827config DRM_PANEL_RENESAS_R61307
828	tristate "Renesas R61307 DSI video mode panel"
829	depends on OF
830	depends on DRM_MIPI_DSI
831	depends on BACKLIGHT_CLASS_DEVICE
832	select VIDEOMODE_HELPERS
833	help
834	  Say Y here if you want to enable support for KOE tx13d100vm0eaa
835	  IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768
836	  resolution and uses 24 bit RGB per pixel.
837
838	  This panel controller can be found in LG Optimus Vu P895 smartphone
839	  in combination with LCD panel.
840
841config DRM_PANEL_RENESAS_R63419
842	tristate "Renesas R63419 dual-DSI video mode panels"
843	depends on OF && GPIOLIB
844	depends on DRM_MIPI_DSI
845	depends on BACKLIGHT_CLASS_DEVICE
846	help
847	  Say Y here if you want to enable support for Ayaneo WT0600 and WT0630
848	  1440x2560 60Hz dual-DSI video mode display panels with Renesas
849	  R63419 IC.
850
851	  These panels are used in Ayaneo handheld gaming devices.
852
853config DRM_PANEL_RENESAS_R69328
854	tristate "Renesas R69328 720x1280 DSI video mode panel"
855	depends on OF
856	depends on DRM_MIPI_DSI
857	depends on BACKLIGHT_CLASS_DEVICE
858	select VIDEOMODE_HELPERS
859	help
860	  Say Y here if you want to enable support for JDI dx12d100vm0eaa
861	  IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280
862	  resolution and uses 24 bit RGB per pixel.
863
864	  This panel controller can be found in LG Optimus 4X P895 smartphone
865	  in combination with LCD panel.
866
867config DRM_PANEL_RONBO_RB070D30
868	tristate "Ronbo Electronics RB070D30 panel"
869	depends on OF
870	depends on DRM_MIPI_DSI
871	depends on BACKLIGHT_CLASS_DEVICE
872	help
873	  Say Y here if you want to enable support for Ronbo Electronics
874	  RB070D30 1024x600 DSI panel.
875
876config DRM_PANEL_SAMSUNG_AMS581VF01
877	tristate "Samsung AMS581VF01 panel"
878	depends on OF
879	depends on DRM_MIPI_DSI
880	depends on BACKLIGHT_CLASS_DEVICE
881	help
882	  Say Y or M here if you want to enable support for the
883	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
884
885config DRM_PANEL_SAMSUNG_AMS639RQ08
886	tristate "Samsung AMS639RQ08 panel"
887	depends on OF
888	depends on DRM_MIPI_DSI
889	depends on BACKLIGHT_CLASS_DEVICE
890	help
891	  Say Y or M here if you want to enable support for the
892	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
893
894config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
895	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
896	depends on GPIOLIB && OF && REGULATOR
897	depends on DRM_MIPI_DSI
898	depends on BACKLIGHT_CLASS_DEVICE
899	help
900	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
901	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
902	  GT-I9195I). To compile this driver as a module, choose M here.
903
904config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
905	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
906	depends on OF
907	select DRM_MIPI_DSI
908	select VIDEOMODE_HELPERS
909
910config DRM_PANEL_SAMSUNG_ATNA33XC20
911	tristate "Samsung ATNA33XC20 eDP panel"
912	depends on OF
913	depends on BACKLIGHT_CLASS_DEVICE
914	depends on PM
915	select DRM_DISPLAY_DP_HELPER
916	select DRM_DISPLAY_HELPER
917	select DRM_DISPLAY_DP_AUX_BUS
918	help
919	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
920	  be handled by the DRM_PANEL_SIMPLE driver because its power
921	  sequencing is non-standard.
922
923config DRM_PANEL_SAMSUNG_DB7430
924	tristate "Samsung DB7430-based DPI panels"
925	depends on OF && SPI && GPIOLIB
926	depends on BACKLIGHT_CLASS_DEVICE
927	select DRM_MIPI_DBI
928	help
929	  Say Y here if you want to enable support for the Samsung
930	  DB7430 DPI display controller used in such devices as the
931	  LMS397KF04 480x800 DPI panel.
932
933config DRM_PANEL_SAMSUNG_LD9040
934	tristate "Samsung LD9040 RGB/SPI panel"
935	depends on OF && SPI
936	depends on BACKLIGHT_CLASS_DEVICE
937	select VIDEOMODE_HELPERS
938
939config DRM_PANEL_SAMSUNG_LTL106HL02
940	tristate "Samsung LTL106HL02 panel"
941	depends on OF
942	depends on DRM_MIPI_DSI
943	depends on BACKLIGHT_CLASS_DEVICE
944	select VIDEOMODE_HELPERS
945	help
946	  Say Y here if you want to enable support for the Samsung LTL106HL02
947	  panel driver which is used in Microsoft Surface 2.
948
949	  To compile this driver as a module, choose M here: the module
950	  will be called panel-samsung-ltl106hl02.
951
952config DRM_PANEL_SAMSUNG_S6E3FA7
953	tristate "Samsung S6E3FA7 panel driver"
954	depends on OF
955	depends on DRM_MIPI_DSI
956	depends on BACKLIGHT_CLASS_DEVICE
957	help
958	  Say Y here if you want to enable support for the Samsung S6E3FA7
959	  1920x2220 panel.
960
961config DRM_PANEL_SAMSUNG_S6D16D0
962	tristate "Samsung S6D16D0 DSI video mode panel"
963	depends on OF
964	depends on DRM_MIPI_DSI
965	select VIDEOMODE_HELPERS
966
967config DRM_PANEL_SAMSUNG_S6D27A1
968	tristate "Samsung S6D27A1 DPI panel driver"
969	depends on OF && SPI && GPIOLIB
970	select DRM_MIPI_DBI
971	help
972	  Say Y here if you want to enable support for the Samsung
973	  S6D27A1 DPI 480x800 panel.
974
975	  This panel can be found in Samsung Galaxy Ace 2
976	  GT-I8160 mobile phone.
977
978config DRM_PANEL_SAMSUNG_S6D7AA0
979	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
980	depends on OF
981	depends on BACKLIGHT_CLASS_DEVICE
982	select DRM_MIPI_DSI
983	select VIDEOMODE_HELPERS
984
985config DRM_PANEL_SAMSUNG_S6E3FC2X01
986	tristate "Samsung S6E3FC2X01 DSI panel controller"
987	depends on GPIOLIB
988	depends on OF
989	depends on DRM_MIPI_DSI
990	depends on BACKLIGHT_CLASS_DEVICE
991	help
992	  Say Y or M here if you want to enable support for the
993	  Samsung S6E3FC2 DDIC and connected MIPI DSI panel.
994	  Currently supported panels:
995
996	    Samsung AMS641RW (found in the OnePlus 6T smartphone)
997
998config DRM_PANEL_SAMSUNG_S6E3HA2
999	tristate "Samsung S6E3HA2 DSI video mode panel"
1000	depends on OF
1001	depends on DRM_MIPI_DSI
1002	depends on BACKLIGHT_CLASS_DEVICE
1003	select VIDEOMODE_HELPERS
1004
1005config DRM_PANEL_SAMSUNG_S6E3HA8
1006	tristate "Samsung S6E3HA8 DSI video mode panel"
1007	depends on GPIOLIB
1008	depends on OF
1009	depends on DRM_MIPI_DSI
1010	depends on BACKLIGHT_CLASS_DEVICE
1011	select DRM_DISPLAY_DSC_HELPER
1012	help
1013	  Say Y or M here if you want to enable support for the
1014	  Samsung S6E3HA8 DDIC and connected MIPI DSI panel.
1015	  Currently supported panels:
1016
1017	    Samsung AMB577PX01 (found in the Samsung S9 smartphone)
1018
1019
1020config DRM_PANEL_SAMSUNG_S6E63J0X03
1021	tristate "Samsung S6E63J0X03 DSI command mode panel"
1022	depends on OF
1023	depends on DRM_MIPI_DSI
1024	depends on BACKLIGHT_CLASS_DEVICE
1025	select VIDEOMODE_HELPERS
1026
1027config DRM_PANEL_SAMSUNG_S6E63M0
1028	tristate "Samsung S6E63M0 RGB panel"
1029	depends on OF
1030	depends on BACKLIGHT_CLASS_DEVICE
1031	help
1032	  Say Y here if you want to enable support for Samsung S6E63M0
1033	  AMOLED LCD panel. This panel can be accessed using SPI or
1034	  DSI.
1035
1036config DRM_PANEL_SAMSUNG_S6E63M0_SPI
1037	tristate "Samsung S6E63M0 RGB SPI interface"
1038	depends on SPI
1039	depends on DRM_PANEL_SAMSUNG_S6E63M0
1040	default DRM_PANEL_SAMSUNG_S6E63M0
1041	select DRM_MIPI_DBI
1042	help
1043	  Say Y here if you want to be able to access the Samsung
1044	  S6E63M0 panel using SPI.
1045
1046config DRM_PANEL_SAMSUNG_S6E63M0_DSI
1047	tristate "Samsung S6E63M0 RGB DSI interface"
1048	depends on DRM_MIPI_DSI
1049	depends on DRM_PANEL_SAMSUNG_S6E63M0
1050	help
1051	  Say Y here if you want to be able to access the Samsung
1052	  S6E63M0 panel using DSI.
1053
1054config DRM_PANEL_SAMSUNG_S6E8AA0
1055	tristate "Samsung S6E8AA0 DSI video mode panel"
1056	depends on OF
1057	select DRM_MIPI_DSI
1058	select VIDEOMODE_HELPERS
1059
1060config DRM_PANEL_SAMSUNG_S6E8AA5X01_AMS561RA01
1061	tristate "Samsung AMS561RA01 panel with S6E8AA5X01 controller"
1062	depends on GPIOLIB && OF && REGULATOR
1063	depends on DRM_MIPI_DSI
1064	depends on BACKLIGHT_CLASS_DEVICE
1065	help
1066	  Say Y here if you want to enable support for Samsung AMS561RA01
1067	  panel, which uses Samsung's S6E8AA5X01 controller. The panel has a
1068	  ~5.6 inch AMOLED display, and the controller is driven by the MIPI
1069	  DSI protocol with 4 lanes.
1070
1071config DRM_PANEL_SAMSUNG_S6E8FC0
1072	tristate "Samsung S6E8FC0 DSI controller"
1073	depends on OF
1074	depends on BACKLIGHT_CLASS_DEVICE
1075	select DRM_MIPI_DSI
1076	help
1077	  Say Y or M here if you want to enable support for the Samsung
1078	  S6E8FC0 DSI controller and connected panel.
1079	  Currently supported panels:
1080
1081	    M1906F9 (M1906F9SH or M1906F9SI), 6.09 inch 720x1560, found
1082	    in the Xiaomi Mi A3 smartphone (xiaomi-laurel).
1083
1084config DRM_PANEL_SAMSUNG_SOFEF00
1085	tristate "Samsung SOFEF00 DSI panel controller"
1086	depends on GPIOLIB
1087	depends on OF
1088	depends on DRM_MIPI_DSI
1089	depends on BACKLIGHT_CLASS_DEVICE
1090	help
1091	  Say Y or M here if you want to enable support for the Samsung AMOLED
1092	  panel SOFEF00 DDIC and connected panel.
1093	  Currently supported panels:
1094
1095	    Samsung AMS628NW01 (found in OnePlus 6, 1080x2280@60Hz)
1096
1097config DRM_PANEL_SEIKO_43WVF1G
1098	tristate "Seiko 43WVF1G panel"
1099	depends on OF
1100	depends on BACKLIGHT_CLASS_DEVICE
1101	select VIDEOMODE_HELPERS
1102	help
1103	  Say Y here if you want to enable support for the Seiko
1104	  43WVF1G controller for 800x480 LCD panels
1105
1106config DRM_PANEL_SHARP_LQ079L1SX01
1107	tristate "Sharp LQ079L1SX01 panel"
1108	depends on OF
1109	depends on DRM_MIPI_DSI
1110	depends on BACKLIGHT_CLASS_DEVICE
1111	select VIDEOMODE_HELPERS
1112	help
1113	  Say Y here if you want to enable support for Sharp LQ079L1SX01
1114	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1115	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1116	  the host.
1117
1118	  To compile this driver as a module, choose M here: the module
1119	  will be called panel-sharp-lq079l1sx01.
1120
1121config DRM_PANEL_SHARP_LQ101R1SX01
1122	tristate "Sharp LQ101R1SX01 panel"
1123	depends on OF
1124	depends on DRM_MIPI_DSI
1125	depends on BACKLIGHT_CLASS_DEVICE
1126	help
1127	  Say Y here if you want to enable support for Sharp LQ101R1SX01
1128	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
1129	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
1130	  the host and has a built-in LED backlight.
1131
1132	  To compile this driver as a module, choose M here: the module
1133	  will be called panel-sharp-lq101r1sx01.
1134
1135config DRM_PANEL_SHARP_LS037V7DW01
1136	tristate "Sharp LS037V7DW01 VGA LCD panel"
1137	depends on GPIOLIB && OF && REGULATOR
1138	help
1139	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
1140	  (480x640) LCD panel (found on the TI SDP3430 board).
1141
1142config DRM_PANEL_SHARP_LS043T1LE01
1143	tristate "Sharp LS043T1LE01 qHD video mode panel"
1144	depends on OF
1145	depends on DRM_MIPI_DSI
1146	depends on BACKLIGHT_CLASS_DEVICE
1147	help
1148	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
1149	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
1150
1151config DRM_PANEL_SHARP_LS060T1SX01
1152	tristate "Sharp LS060T1SX01 FullHD video mode panel"
1153	depends on OF
1154	depends on DRM_MIPI_DSI
1155	depends on BACKLIGHT_CLASS_DEVICE
1156	help
1157	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
1158	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
1159	  Bundle.
1160
1161config DRM_PANEL_SITRONIX_ST7701
1162	tristate "Sitronix ST7701 panel driver"
1163	depends on OF
1164	depends on SPI || DRM_MIPI_DSI
1165	select DRM_MIPI_DBI if SPI
1166	depends on BACKLIGHT_CLASS_DEVICE
1167	help
1168	  Say Y here if you want to enable support for the Sitronix
1169	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
1170	  system interfaces.
1171
1172config DRM_PANEL_SITRONIX_ST7703
1173	tristate "Sitronix ST7703 based MIPI touchscreen panels"
1174	depends on OF
1175	depends on DRM_MIPI_DSI
1176	depends on BACKLIGHT_CLASS_DEVICE
1177	help
1178	  Say Y here if you want to enable support for Sitronix ST7703 based
1179	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
1180	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
1181	  in backlight and touch controller.
1182	  Touch input support is provided by the goodix driver and needs to be
1183	  selected separately.
1184
1185config DRM_PANEL_SITRONIX_ST7789V
1186	tristate "Sitronix ST7789V panel"
1187	depends on OF && SPI
1188	depends on BACKLIGHT_CLASS_DEVICE
1189	help
1190	  Say Y here if you want to enable support for the Sitronix
1191	  ST7789V controller for 240x320 LCD panels
1192
1193config DRM_PANEL_SONY_ACX565AKM
1194	tristate "Sony ACX565AKM panel"
1195	depends on GPIOLIB && OF && SPI
1196	depends on BACKLIGHT_CLASS_DEVICE
1197	help
1198	  Say Y here if you want to enable support for the Sony ACX565AKM
1199	  800x600 3.5" panel (found on the Nokia N900).
1200
1201config DRM_PANEL_SONY_TD4353_JDI
1202	tristate "Sony TD4353 JDI panel"
1203	depends on GPIOLIB && OF
1204	depends on DRM_MIPI_DSI
1205	depends on BACKLIGHT_CLASS_DEVICE
1206	help
1207	  Say Y here if you want to enable support for the Sony Tama
1208	  TD4353 JDI command mode panel as found on some Sony Xperia
1209	  XZ2 and XZ2 Compact smartphones.
1210
1211config DRM_PANEL_SONY_TULIP_TRULY_NT35521
1212	tristate "Sony Tulip Truly NT35521 panel"
1213	depends on GPIOLIB && OF
1214	depends on DRM_MIPI_DSI
1215	depends on BACKLIGHT_CLASS_DEVICE
1216	help
1217	  Say Y here if you want to enable support for the Sony Tulip
1218	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
1219	  Aqua phone.
1220
1221config DRM_PANEL_STARTEK_KD070FHFID015
1222	tristate "STARTEK KD070FHFID015 panel"
1223	depends on OF
1224	depends on DRM_MIPI_DSI
1225	depends on BACKLIGHT_CLASS_DEVICE
1226	help
1227	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
1228	  based on RENESAS-R69429 controller. The panel is a 7-inch TFT LCD display
1229	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
1230	  the host, a built-in LED backlight and touch controller.
1231
1232config DRM_PANEL_EDP
1233	tristate "support for simple Embedded DisplayPort panels"
1234	depends on OF
1235	depends on BACKLIGHT_CLASS_DEVICE
1236	depends on PM
1237	select VIDEOMODE_HELPERS
1238	select DRM_DISPLAY_DP_HELPER
1239	select DRM_DISPLAY_HELPER
1240	select DRM_DISPLAY_DP_AUX_BUS
1241	select DRM_KMS_HELPER
1242	help
1243	  DRM panel driver for dumb eDP panels that need at most a regulator and
1244	  a GPIO to be powered up. Optionally a backlight can be attached so
1245	  that it can be automatically turned off when the panel goes into a
1246	  low power state.
1247
1248config DRM_PANEL_SIMPLE
1249	tristate "support for simple panels (other than eDP ones)"
1250	depends on OF
1251	depends on BACKLIGHT_CLASS_DEVICE
1252	depends on PM
1253	select VIDEOMODE_HELPERS
1254	help
1255	  DRM panel driver for dumb non-eDP panels that need at most a regulator
1256	  and a GPIO to be powered up. Optionally a backlight can be attached so
1257	  that it can be automatically turned off when the panel goes into a
1258	  low power state.
1259
1260config DRM_PANEL_SUMMIT
1261	tristate "Apple Summit display panel"
1262	depends on OF
1263	depends on DRM_MIPI_DSI
1264	depends on BACKLIGHT_CLASS_DEVICE
1265	help
1266	  Say Y if you want to enable support for the "Summit" display panel
1267	  used as a touchbar on certain Apple laptops.
1268
1269config DRM_PANEL_SYNAPTICS_R63353
1270	tristate "Synaptics R63353-based panels"
1271	depends on OF
1272	depends on DRM_MIPI_DSI
1273	depends on BACKLIGHT_CLASS_DEVICE
1274	help
1275	  Say Y if you want to enable support for panels based on the
1276	  Synaptics R63353 controller.
1277
1278config DRM_PANEL_SYNAPTICS_TDDI
1279	tristate "Synaptics TDDI display panels"
1280	depends on OF
1281	depends on DRM_MIPI_DSI
1282	depends on BACKLIGHT_CLASS_DEVICE
1283	help
1284	  Say Y if you want to enable support for the Synaptics TDDI display
1285	  panels. There are multiple MIPI DSI panels manufactured under the TDDI
1286	  namesake, with varying resolutions and data lanes. They also have a
1287	  built-in LED backlight and a touch controller.
1288
1289config DRM_PANEL_TDO_TL070WSH30
1290	tristate "TDO TL070WSH30 DSI panel"
1291	depends on OF
1292	depends on DRM_MIPI_DSI
1293	depends on BACKLIGHT_CLASS_DEVICE
1294	help
1295	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
1296	  panel module. The panel has a 1024×600 resolution and uses
1297	  24 bit RGB per pixel. It provides a MIPI DSI interface to
1298	  the host, a built-in LED backlight and touch controller.
1299
1300config DRM_PANEL_TPO_TD028TTEC1
1301	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
1302	depends on OF && SPI
1303	depends on BACKLIGHT_CLASS_DEVICE
1304	help
1305	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
1306	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
1307
1308config DRM_PANEL_TPO_TD043MTEA1
1309	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
1310	depends on GPIOLIB && OF && REGULATOR && SPI
1311	help
1312	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
1313	  4.3" panel (found on the OMAP3 Pandora board).
1314
1315config DRM_PANEL_TPO_TPG110
1316	tristate "TPO TPG 800x400 panel"
1317	depends on OF && SPI && GPIOLIB
1318	depends on BACKLIGHT_CLASS_DEVICE
1319	help
1320	  Say Y here if you want to enable support for TPO TPG110
1321	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
1322	  800x400 LCD panels.
1323
1324config DRM_PANEL_TRULY_NT35597_WQXGA
1325	tristate "Truly WQXGA"
1326	depends on OF
1327	depends on DRM_MIPI_DSI
1328	help
1329	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
1330	  Video Mode panel
1331
1332config DRM_PANEL_VISIONOX_G2647FB105
1333	tristate "Visionox G2647FB105"
1334	depends on OF
1335	depends on DRM_MIPI_DSI
1336	depends on BACKLIGHT_CLASS_DEVICE
1337	help
1338	  Say Y here if you want to enable support for the Visionox
1339	  G2647FB105 (2340x1080@60Hz) AMOLED DSI cmd mode panel.
1340
1341config DRM_PANEL_VISIONOX_R66451
1342	tristate "Visionox R66451"
1343	depends on OF
1344	depends on DRM_MIPI_DSI
1345	depends on BACKLIGHT_CLASS_DEVICE
1346	select DRM_DISPLAY_DSC_HELPER
1347	select DRM_DISPLAY_HELPER
1348	help
1349	  Say Y here if you want to enable support for Visionox
1350	  R66451 1080x2340 AMOLED DSI panel.
1351
1352config DRM_PANEL_VISIONOX_RM69299
1353	tristate "Visionox RM69299"
1354	depends on GPIOLIB
1355	depends on OF
1356	depends on DRM_MIPI_DSI
1357	depends on BACKLIGHT_CLASS_DEVICE
1358	help
1359	  Say Y here if you want to enable support for Visionox
1360	  RM69299  DSI Video Mode panel.
1361
1362config DRM_PANEL_VISIONOX_RM692E5
1363	tristate "Visionox RM692E5"
1364	depends on OF
1365	depends on DRM_MIPI_DSI
1366	depends on BACKLIGHT_CLASS_DEVICE
1367	select DRM_DISPLAY_DSC_HELPER
1368	select DRM_DISPLAY_HELPER
1369	help
1370	  Say Y here if you want to enable support for Visionox RM692E5 amoled
1371	  display panels, such as the one found in the Nothing Phone (1)
1372	  smartphone.
1373
1374config DRM_PANEL_VISIONOX_VTDR6130
1375	tristate "Visionox VTDR6130"
1376	depends on OF
1377	depends on DRM_MIPI_DSI
1378	depends on BACKLIGHT_CLASS_DEVICE
1379	help
1380	  Say Y here if you want to enable support for Visionox
1381	  VTDR6130 1080x2400 AMOLED DSI panel.
1382
1383config DRM_PANEL_WIDECHIPS_WS2401
1384	tristate "Widechips WS2401 DPI panel driver"
1385	depends on SPI && GPIOLIB
1386	depends on BACKLIGHT_CLASS_DEVICE
1387	select DRM_MIPI_DBI
1388	help
1389	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1390	  480x800 display controller used in panels such as Samsung LMS380KF01.
1391	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1392
1393config DRM_PANEL_XINPENG_XPP055C272
1394	tristate "Xinpeng XPP055C272 panel driver"
1395	depends on OF
1396	depends on DRM_MIPI_DSI
1397	depends on BACKLIGHT_CLASS_DEVICE
1398	help
1399	  Say Y here if you want to enable support for the Xinpeng
1400	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1401	  system interfaces.
1402endmenu
1403