1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_BOE_BF060Y8M_AJ0 41 tristate "Boe BF060Y8M-AJ0 panel" 42 depends on OF 43 depends on DRM_MIPI_DSI 44 depends on BACKLIGHT_CLASS_DEVICE 45 help 46 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 47 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 48 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 49 the host and backlight is controlled through DSI commands. 50 51config DRM_PANEL_BOE_HIMAX8279D 52 tristate "Boe Himax8279d panel" 53 depends on OF 54 depends on DRM_MIPI_DSI 55 depends on BACKLIGHT_CLASS_DEVICE 56 help 57 Say Y here if you want to enable support for Boe Himax8279d 58 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 59 24 bit RGB per pixel. It provides a MIPI DSI interface to 60 the host and has a built-in LED backlight. 61 62config DRM_PANEL_BOE_TV101WUM_NL6 63 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 64 depends on OF 65 depends on DRM_MIPI_DSI 66 depends on BACKLIGHT_CLASS_DEVICE 67 help 68 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 69 45NA WUXGA PANEL DSI Video Mode panel 70 71config DRM_PANEL_DSI_CM 72 tristate "Generic DSI command mode panels" 73 depends on OF 74 depends on DRM_MIPI_DSI 75 depends on BACKLIGHT_CLASS_DEVICE 76 help 77 DRM panel driver for DSI command mode panels with support for 78 embedded and external backlights. 79 80config DRM_PANEL_LVDS 81 tristate "Generic LVDS panel driver" 82 depends on OF 83 depends on BACKLIGHT_CLASS_DEVICE 84 select VIDEOMODE_HELPERS 85 help 86 This driver supports LVDS panels that don't require device-specific 87 handling of power supplies or control signals. It implements automatic 88 backlight handling if the panel is attached to a backlight controller. 89 90config DRM_PANEL_SIMPLE 91 tristate "support for simple panels (other than eDP ones)" 92 depends on OF 93 depends on BACKLIGHT_CLASS_DEVICE 94 depends on PM 95 select VIDEOMODE_HELPERS 96 help 97 DRM panel driver for dumb non-eDP panels that need at most a regulator 98 and a GPIO to be powered up. Optionally a backlight can be attached so 99 that it can be automatically turned off when the panel goes into a 100 low power state. 101 102config DRM_PANEL_EDP 103 tristate "support for simple Embedded DisplayPort panels" 104 depends on OF 105 depends on BACKLIGHT_CLASS_DEVICE 106 depends on PM 107 select VIDEOMODE_HELPERS 108 select DRM_DISPLAY_DP_HELPER 109 select DRM_DISPLAY_HELPER 110 select DRM_DP_AUX_BUS 111 select DRM_KMS_HELPER 112 help 113 DRM panel driver for dumb eDP panels that need at most a regulator and 114 a GPIO to be powered up. Optionally a backlight can be attached so 115 that it can be automatically turned off when the panel goes into a 116 low power state. 117 118config DRM_PANEL_ELIDA_KD35T133 119 tristate "Elida KD35T133 panel driver" 120 depends on OF 121 depends on DRM_MIPI_DSI 122 depends on BACKLIGHT_CLASS_DEVICE 123 help 124 Say Y here if you want to enable support for the Elida 125 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 126 system interfaces. 127 128config DRM_PANEL_FEIXIN_K101_IM2BA02 129 tristate "Feixin K101 IM2BA02 panel" 130 depends on OF 131 depends on DRM_MIPI_DSI 132 depends on BACKLIGHT_CLASS_DEVICE 133 help 134 Say Y here if you want to enable support for the Feixin K101 IM2BA02 135 4-lane 800x1280 MIPI DSI panel. 136 137config DRM_PANEL_FEIYANG_FY07024DI26A30D 138 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 139 depends on OF 140 depends on DRM_MIPI_DSI 141 depends on BACKLIGHT_CLASS_DEVICE 142 help 143 Say Y if you want to enable support for panels based on the 144 Feiyang FY07024DI26A30-D MIPI-DSI interface. 145 146config DRM_PANEL_ILITEK_IL9322 147 tristate "Ilitek ILI9322 320x240 QVGA panels" 148 depends on OF && SPI 149 select REGMAP 150 help 151 Say Y here if you want to enable support for Ilitek IL9322 152 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 153 154config DRM_PANEL_ILITEK_ILI9341 155 tristate "Ilitek ILI9341 240x320 QVGA panels" 156 depends on OF && SPI 157 depends on DRM_KMS_HELPER 158 depends on DRM_GEM_CMA_HELPER 159 depends on BACKLIGHT_CLASS_DEVICE 160 select DRM_MIPI_DBI 161 help 162 Say Y here if you want to enable support for Ilitek IL9341 163 QVGA (240x320) RGB panels. support serial & parallel rgb 164 interface. 165 166config DRM_PANEL_ILITEK_ILI9881C 167 tristate "Ilitek ILI9881C-based panels" 168 depends on OF 169 depends on DRM_MIPI_DSI 170 depends on BACKLIGHT_CLASS_DEVICE 171 help 172 Say Y if you want to enable support for panels based on the 173 Ilitek ILI9881c controller. 174 175config DRM_PANEL_INNOLUX_EJ030NA 176 tristate "Innolux EJ030NA 320x480 LCD panel" 177 depends on OF && SPI 178 select REGMAP_SPI 179 help 180 Say Y here to enable support for the Innolux/Chimei EJ030NA 181 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 182 and LDK handheld gaming consoles. 183 184config DRM_PANEL_INNOLUX_P079ZCA 185 tristate "Innolux P079ZCA panel" 186 depends on OF 187 depends on DRM_MIPI_DSI 188 depends on BACKLIGHT_CLASS_DEVICE 189 help 190 Say Y here if you want to enable support for Innolux P079ZCA 191 TFT-LCD modules. The panel has a 1024x768 resolution and uses 192 24 bit RGB per pixel. It provides a MIPI DSI interface to 193 the host and has a built-in LED backlight. 194 195config DRM_PANEL_JDI_LT070ME05000 196 tristate "JDI LT070ME05000 WUXGA DSI panel" 197 depends on OF 198 depends on DRM_MIPI_DSI 199 depends on BACKLIGHT_CLASS_DEVICE 200 help 201 Say Y here if you want to enable support for JDI DSI video mode 202 panel as found in Google Nexus 7 (2013) devices. 203 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 204 24 bit per pixel. 205 206config DRM_PANEL_JDI_R63452 207 tristate "JDI R63452 Full HD DSI panel" 208 depends on OF 209 depends on DRM_MIPI_DSI 210 depends on BACKLIGHT_CLASS_DEVICE 211 help 212 Say Y here if you want to enable support for the JDI R63452 213 DSI command mode panel as found in Xiaomi Mi 5 Devices. 214 215config DRM_PANEL_KHADAS_TS050 216 tristate "Khadas TS050 panel" 217 depends on OF 218 depends on DRM_MIPI_DSI 219 depends on BACKLIGHT_CLASS_DEVICE 220 help 221 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 222 panel module. The panel has a 1080x1920 resolution and uses 223 24 bit RGB per pixel. It provides a MIPI DSI interface to 224 the host, a built-in LED backlight and touch controller. 225 226config DRM_PANEL_KINGDISPLAY_KD097D04 227 tristate "Kingdisplay kd097d04 panel" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y here if you want to enable support for Kingdisplay kd097d04 233 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 234 24 bit RGB per pixel. It provides a MIPI DSI interface to 235 the host and has a built-in LED backlight. 236 237config DRM_PANEL_LEADTEK_LTK050H3146W 238 tristate "Leadtek LTK050H3146W panel" 239 depends on OF 240 depends on DRM_MIPI_DSI 241 depends on BACKLIGHT_CLASS_DEVICE 242 help 243 Say Y here if you want to enable support for Leadtek LTK050H3146W 244 TFT-LCD modules. The panel has a 720x1280 resolution and uses 245 24 bit RGB per pixel. It provides a MIPI DSI interface to 246 the host and has a built-in LED backlight. 247 248config DRM_PANEL_LEADTEK_LTK500HD1829 249 tristate "Leadtek LTK500HD1829 panel" 250 depends on OF 251 depends on DRM_MIPI_DSI 252 depends on BACKLIGHT_CLASS_DEVICE 253 help 254 Say Y here if you want to enable support for Kingdisplay kd097d04 255 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 256 24 bit RGB per pixel. It provides a MIPI DSI interface to 257 the host and has a built-in LED backlight. 258 259config DRM_PANEL_SAMSUNG_LD9040 260 tristate "Samsung LD9040 RGB/SPI panel" 261 depends on OF && SPI 262 select VIDEOMODE_HELPERS 263 264config DRM_PANEL_LG_LB035Q02 265 tristate "LG LB035Q024573 RGB panel" 266 depends on GPIOLIB && OF && SPI 267 help 268 Say Y here if you want to enable support for the LB035Q02 RGB panel 269 (found on the Gumstix Overo Palo35 board). To compile this driver as 270 a module, choose M here. 271 272config DRM_PANEL_LG_LG4573 273 tristate "LG4573 RGB/SPI panel" 274 depends on OF && SPI 275 select VIDEOMODE_HELPERS 276 help 277 Say Y here if you want to enable support for LG4573 RGB panel. 278 To compile this driver as a module, choose M here. 279 280config DRM_PANEL_NEC_NL8048HL11 281 tristate "NEC NL8048HL11 RGB panel" 282 depends on GPIOLIB && OF && SPI 283 help 284 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 285 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 286 as a module, choose M here. 287 288config DRM_PANEL_NEWVISION_NV3052C 289 tristate "NewVision NV3052C RGB/SPI panel" 290 depends on OF && SPI 291 depends on BACKLIGHT_CLASS_DEVICE 292 select DRM_MIPI_DBI 293 help 294 Say Y here if you want to enable support for the panels built 295 around the NewVision NV3052C display controller. 296 297config DRM_PANEL_NOVATEK_NT35510 298 tristate "Novatek NT35510 RGB panel driver" 299 depends on OF 300 depends on DRM_MIPI_DSI 301 depends on BACKLIGHT_CLASS_DEVICE 302 help 303 Say Y here if you want to enable support for the panels built 304 around the Novatek NT35510 display controller, such as some 305 Hydis panels. 306 307config DRM_PANEL_NOVATEK_NT35560 308 tristate "Novatek NT35560 DSI command mode panel" 309 depends on OF 310 depends on DRM_MIPI_DSI 311 depends on BACKLIGHT_CLASS_DEVICE 312 select VIDEOMODE_HELPERS 313 help 314 Say Y here if you want to enable the Novatek NT35560 display 315 controller. This panel supports DSI in both command and video 316 mode. This supports several panels such as Sony ACX424AKM and 317 ACX424AKP. 318 319config DRM_PANEL_NOVATEK_NT35950 320 tristate "Novatek NT35950 DSI panel" 321 depends on OF 322 depends on DRM_MIPI_DSI 323 depends on BACKLIGHT_CLASS_DEVICE 324 help 325 Say Y here if you want to enable support for the panels built 326 around the Novatek NT35950 display controller, such as some 327 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 328 mobile phones. 329 330config DRM_PANEL_NOVATEK_NT36672A 331 tristate "Novatek NT36672A DSI panel" 332 depends on OF 333 depends on DRM_MIPI_DSI 334 depends on BACKLIGHT_CLASS_DEVICE 335 help 336 Say Y here if you want to enable support for the panels built 337 around the Novatek NT36672A display controller, such as some 338 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 339 340config DRM_PANEL_NOVATEK_NT39016 341 tristate "Novatek NT39016 RGB/SPI panel" 342 depends on OF && SPI 343 depends on BACKLIGHT_CLASS_DEVICE 344 select REGMAP_SPI 345 help 346 Say Y here if you want to enable support for the panels built 347 around the Novatek NT39016 display controller. 348 349config DRM_PANEL_MANTIX_MLAF057WE51 350 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 351 depends on OF 352 depends on DRM_MIPI_DSI 353 depends on BACKLIGHT_CLASS_DEVICE 354 help 355 Say Y here if you want to enable support for the Mantix 356 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 357 has a resolution of 720x1440 pixels, a built in backlight and touch 358 controller. 359 360config DRM_PANEL_OLIMEX_LCD_OLINUXINO 361 tristate "Olimex LCD-OLinuXino panel" 362 depends on OF 363 depends on I2C 364 depends on BACKLIGHT_CLASS_DEVICE 365 select CRC32 366 help 367 The panel is used with different sizes LCDs, from 480x272 to 368 1280x800, and 24 bit per pixel. 369 370 Say Y here if you want to enable support for Olimex Ltd. 371 LCD-OLinuXino panel. 372 373config DRM_PANEL_ORISETECH_OTM8009A 374 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 375 depends on OF 376 depends on DRM_MIPI_DSI 377 depends on BACKLIGHT_CLASS_DEVICE 378 help 379 Say Y here if you want to enable support for Orise Technology 380 otm8009a 480x800 dsi 2dl panel. 381 382config DRM_PANEL_OSD_OSD101T2587_53TS 383 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 384 depends on OF 385 depends on DRM_MIPI_DSI 386 depends on BACKLIGHT_CLASS_DEVICE 387 help 388 Say Y here if you want to enable support for One Stop Displays 389 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 390 391config DRM_PANEL_PANASONIC_VVX10F034N00 392 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 393 depends on OF 394 depends on DRM_MIPI_DSI 395 depends on BACKLIGHT_CLASS_DEVICE 396 help 397 Say Y here if you want to enable support for Panasonic VVX10F034N00 398 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 399 Xperia Z2 tablets 400 401config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 402 tristate "Raspberry Pi 7-inch touchscreen panel" 403 depends on DRM_MIPI_DSI 404 help 405 Say Y here if you want to enable support for the Raspberry 406 Pi 7" Touchscreen. To compile this driver as a module, 407 choose M here. 408 409config DRM_PANEL_RAYDIUM_RM67191 410 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 411 depends on OF 412 depends on DRM_MIPI_DSI 413 depends on BACKLIGHT_CLASS_DEVICE 414 help 415 Say Y here if you want to enable support for Raydium RM67191 FHD 416 (1080x1920) DSI panel. 417 418config DRM_PANEL_RAYDIUM_RM68200 419 tristate "Raydium RM68200 720x1280 DSI video mode panel" 420 depends on OF 421 depends on DRM_MIPI_DSI 422 depends on BACKLIGHT_CLASS_DEVICE 423 help 424 Say Y here if you want to enable support for Raydium RM68200 425 720x1280 DSI video mode panel. 426 427config DRM_PANEL_RONBO_RB070D30 428 tristate "Ronbo Electronics RB070D30 panel" 429 depends on OF 430 depends on DRM_MIPI_DSI 431 depends on BACKLIGHT_CLASS_DEVICE 432 help 433 Say Y here if you want to enable support for Ronbo Electronics 434 RB070D30 1024x600 DSI panel. 435 436config DRM_PANEL_SAMSUNG_ATNA33XC20 437 tristate "Samsung ATNA33XC20 eDP panel" 438 depends on OF 439 depends on BACKLIGHT_CLASS_DEVICE 440 depends on PM 441 select DRM_DP_AUX_BUS 442 help 443 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 444 be handled by the DRM_PANEL_SIMPLE driver because its power 445 sequencing is non-standard. 446 447config DRM_PANEL_SAMSUNG_DB7430 448 tristate "Samsung DB7430-based DPI panels" 449 depends on OF && SPI && GPIOLIB 450 depends on BACKLIGHT_CLASS_DEVICE 451 select DRM_MIPI_DBI 452 help 453 Say Y here if you want to enable support for the Samsung 454 DB7430 DPI display controller used in such devices as the 455 LMS397KF04 480x800 DPI panel. 456 457config DRM_PANEL_SAMSUNG_S6D16D0 458 tristate "Samsung S6D16D0 DSI video mode panel" 459 depends on OF 460 depends on DRM_MIPI_DSI 461 select VIDEOMODE_HELPERS 462 463config DRM_PANEL_SAMSUNG_S6D27A1 464 tristate "Samsung S6D27A1 DPI panel driver" 465 depends on OF && SPI && GPIOLIB 466 select DRM_MIPI_DBI 467 help 468 Say Y here if you want to enable support for the Samsung 469 S6D27A1 DPI 480x800 panel. 470 471 This panel can be found in Samsung Galaxy Ace 2 472 GT-I8160 mobile phone. 473 474config DRM_PANEL_SAMSUNG_S6E3HA2 475 tristate "Samsung S6E3HA2 DSI video mode panel" 476 depends on OF 477 depends on DRM_MIPI_DSI 478 depends on BACKLIGHT_CLASS_DEVICE 479 select VIDEOMODE_HELPERS 480 481config DRM_PANEL_SAMSUNG_S6E63J0X03 482 tristate "Samsung S6E63J0X03 DSI command mode panel" 483 depends on OF 484 depends on DRM_MIPI_DSI 485 depends on BACKLIGHT_CLASS_DEVICE 486 select VIDEOMODE_HELPERS 487 488config DRM_PANEL_SAMSUNG_S6E63M0 489 tristate "Samsung S6E63M0 RGB panel" 490 depends on OF 491 depends on BACKLIGHT_CLASS_DEVICE 492 help 493 Say Y here if you want to enable support for Samsung S6E63M0 494 AMOLED LCD panel. This panel can be accessed using SPI or 495 DSI. 496 497config DRM_PANEL_SAMSUNG_S6E63M0_SPI 498 tristate "Samsung S6E63M0 RGB SPI interface" 499 depends on SPI 500 depends on DRM_PANEL_SAMSUNG_S6E63M0 501 default DRM_PANEL_SAMSUNG_S6E63M0 502 select DRM_MIPI_DBI 503 help 504 Say Y here if you want to be able to access the Samsung 505 S6E63M0 panel using SPI. 506 507config DRM_PANEL_SAMSUNG_S6E63M0_DSI 508 tristate "Samsung S6E63M0 RGB DSI interface" 509 depends on DRM_MIPI_DSI 510 depends on DRM_PANEL_SAMSUNG_S6E63M0 511 help 512 Say Y here if you want to be able to access the Samsung 513 S6E63M0 panel using DSI. 514 515config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 516 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 517 depends on OF 518 select DRM_MIPI_DSI 519 select VIDEOMODE_HELPERS 520 521config DRM_PANEL_SAMSUNG_S6E8AA0 522 tristate "Samsung S6E8AA0 DSI video mode panel" 523 depends on OF 524 select DRM_MIPI_DSI 525 select VIDEOMODE_HELPERS 526 527config DRM_PANEL_SAMSUNG_SOFEF00 528 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 529 depends on OF 530 depends on DRM_MIPI_DSI 531 depends on BACKLIGHT_CLASS_DEVICE 532 select VIDEOMODE_HELPERS 533 help 534 Say Y or M here if you want to enable support for the Samsung AMOLED 535 command mode panels found in the OnePlus 6/6T smartphones. 536 537 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 538 539config DRM_PANEL_SEIKO_43WVF1G 540 tristate "Seiko 43WVF1G panel" 541 depends on OF 542 depends on BACKLIGHT_CLASS_DEVICE 543 select VIDEOMODE_HELPERS 544 help 545 Say Y here if you want to enable support for the Seiko 546 43WVF1G controller for 800x480 LCD panels 547 548config DRM_PANEL_SHARP_LQ101R1SX01 549 tristate "Sharp LQ101R1SX01 panel" 550 depends on OF 551 depends on DRM_MIPI_DSI 552 depends on BACKLIGHT_CLASS_DEVICE 553 help 554 Say Y here if you want to enable support for Sharp LQ101R1SX01 555 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 556 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 557 the host and has a built-in LED backlight. 558 559 To compile this driver as a module, choose M here: the module 560 will be called panel-sharp-lq101r1sx01. 561 562config DRM_PANEL_SHARP_LS037V7DW01 563 tristate "Sharp LS037V7DW01 VGA LCD panel" 564 depends on GPIOLIB && OF && REGULATOR 565 help 566 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 567 (480x640) LCD panel (found on the TI SDP3430 board). 568 569config DRM_PANEL_SHARP_LS043T1LE01 570 tristate "Sharp LS043T1LE01 qHD video mode panel" 571 depends on OF 572 depends on DRM_MIPI_DSI 573 depends on BACKLIGHT_CLASS_DEVICE 574 help 575 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 576 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 577 578config DRM_PANEL_SHARP_LS060T1SX01 579 tristate "Sharp LS060T1SX01 FullHD video mode panel" 580 depends on OF 581 depends on DRM_MIPI_DSI 582 depends on BACKLIGHT_CLASS_DEVICE 583 help 584 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 585 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 586 Bundle. 587 588config DRM_PANEL_SITRONIX_ST7701 589 tristate "Sitronix ST7701 panel driver" 590 depends on OF 591 depends on DRM_MIPI_DSI 592 depends on BACKLIGHT_CLASS_DEVICE 593 help 594 Say Y here if you want to enable support for the Sitronix 595 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 596 system interfaces. 597 598config DRM_PANEL_SITRONIX_ST7703 599 tristate "Sitronix ST7703 based MIPI touchscreen panels" 600 depends on OF 601 depends on DRM_MIPI_DSI 602 depends on BACKLIGHT_CLASS_DEVICE 603 help 604 Say Y here if you want to enable support for Sitronix ST7703 based 605 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 606 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 607 in backlight and touch controller. 608 Touch input support is provided by the goodix driver and needs to be 609 selected separately. 610 611config DRM_PANEL_SITRONIX_ST7789V 612 tristate "Sitronix ST7789V panel" 613 depends on OF && SPI 614 depends on BACKLIGHT_CLASS_DEVICE 615 help 616 Say Y here if you want to enable support for the Sitronix 617 ST7789V controller for 240x320 LCD panels 618 619config DRM_PANEL_SONY_ACX565AKM 620 tristate "Sony ACX565AKM panel" 621 depends on GPIOLIB && OF && SPI 622 depends on BACKLIGHT_CLASS_DEVICE 623 help 624 Say Y here if you want to enable support for the Sony ACX565AKM 625 800x600 3.5" panel (found on the Nokia N900). 626 627config DRM_PANEL_SONY_TULIP_TRULY_NT35521 628 tristate "Sony Tulip Truly NT35521 panel" 629 depends on GPIOLIB && OF 630 depends on DRM_MIPI_DSI 631 depends on BACKLIGHT_CLASS_DEVICE 632 help 633 Say Y here if you want to enable support for the Sony Tulip 634 NT35521 1280x720 video mode panel as found on Sony Xperia M4 635 Aqua phone. 636 637config DRM_PANEL_TDO_TL070WSH30 638 tristate "TDO TL070WSH30 DSI panel" 639 depends on OF 640 depends on DRM_MIPI_DSI 641 depends on BACKLIGHT_CLASS_DEVICE 642 help 643 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 644 panel module. The panel has a 1024×600 resolution and uses 645 24 bit RGB per pixel. It provides a MIPI DSI interface to 646 the host, a built-in LED backlight and touch controller. 647 648config DRM_PANEL_TPO_TD028TTEC1 649 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 650 depends on OF && SPI 651 depends on BACKLIGHT_CLASS_DEVICE 652 help 653 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 654 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 655 656config DRM_PANEL_TPO_TD043MTEA1 657 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 658 depends on GPIOLIB && OF && REGULATOR && SPI 659 help 660 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 661 4.3" panel (found on the OMAP3 Pandora board). 662 663config DRM_PANEL_TPO_TPG110 664 tristate "TPO TPG 800x400 panel" 665 depends on OF && SPI && GPIOLIB 666 depends on BACKLIGHT_CLASS_DEVICE 667 help 668 Say Y here if you want to enable support for TPO TPG110 669 400CH LTPS TFT LCD Single Chip Digital Driver for up to 670 800x400 LCD panels. 671 672config DRM_PANEL_TRULY_NT35597_WQXGA 673 tristate "Truly WQXGA" 674 depends on OF 675 depends on DRM_MIPI_DSI 676 help 677 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 678 Video Mode panel 679 680config DRM_PANEL_VISIONOX_RM69299 681 tristate "Visionox RM69299" 682 depends on OF 683 depends on DRM_MIPI_DSI 684 help 685 Say Y here if you want to enable support for Visionox 686 RM69299 DSI Video Mode panel. 687 688config DRM_PANEL_WIDECHIPS_WS2401 689 tristate "Widechips WS2401 DPI panel driver" 690 depends on SPI && GPIOLIB 691 depends on BACKLIGHT_CLASS_DEVICE 692 select DRM_MIPI_DBI 693 help 694 Say Y here if you want to enable support for the Widechips WS2401 DPI 695 480x800 display controller used in panels such as Samsung LMS380KF01. 696 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 697 698config DRM_PANEL_XINPENG_XPP055C272 699 tristate "Xinpeng XPP055C272 panel driver" 700 depends on OF 701 depends on DRM_MIPI_DSI 702 depends on BACKLIGHT_CLASS_DEVICE 703 help 704 Say Y here if you want to enable support for the Xinpeng 705 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 706 system interfaces. 707endmenu 708