xref: /linux/drivers/edac/Kconfig (revision fd639726bf15fca8ee1a00dce8e0096d0ad9bd18)
1#
2#	EDAC Kconfig
3#	Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com
4#	Licensed and distributed under the GPL
5
6config EDAC_ATOMIC_SCRUB
7	bool
8
9config EDAC_SUPPORT
10	bool
11
12menuconfig EDAC
13	tristate "EDAC (Error Detection And Correction) reporting"
14	depends on HAS_IOMEM && EDAC_SUPPORT && RAS
15	help
16	  EDAC is a subsystem along with hardware-specific drivers designed to
17	  report hardware errors. These are low-level errors that are reported
18	  in the CPU or supporting chipset or other subsystems:
19	  memory errors, cache errors, PCI errors, thermal throttling, etc..
20	  If unsure, select 'Y'.
21
22	  The mailing list for the EDAC project is linux-edac@vger.kernel.org.
23
24if EDAC
25
26config EDAC_LEGACY_SYSFS
27	bool "EDAC legacy sysfs"
28	default y
29	help
30	  Enable the compatibility sysfs nodes.
31	  Use 'Y' if your edac utilities aren't ported to work with the newer
32	  structures.
33
34config EDAC_DEBUG
35	bool "Debugging"
36	select DEBUG_FS
37	help
38	  This turns on debugging information for the entire EDAC subsystem.
39	  You do so by inserting edac_module with "edac_debug_level=x." Valid
40	  levels are 0-4 (from low to high) and by default it is set to 2.
41	  Usually you should select 'N' here.
42
43config EDAC_DECODE_MCE
44	tristate "Decode MCEs in human-readable form (only on AMD for now)"
45	depends on CPU_SUP_AMD && X86_MCE_AMD
46	default y
47	---help---
48	  Enable this option if you want to decode Machine Check Exceptions
49	  occurring on your machine in human-readable form.
50
51	  You should definitely say Y here in case you want to decode MCEs
52	  which occur really early upon boot, before the module infrastructure
53	  has been initialized.
54
55config EDAC_GHES
56	bool "Output ACPI APEI/GHES BIOS detected errors via EDAC"
57	depends on ACPI_APEI_GHES && (EDAC=y)
58	help
59	  Not all machines support hardware-driven error report. Some of those
60	  provide a BIOS-driven error report mechanism via ACPI, using the
61	  APEI/GHES driver. By enabling this option, the error reports provided
62	  by GHES are sent to userspace via the EDAC API.
63
64	  When this option is enabled, it will disable the hardware-driven
65	  mechanisms, if a GHES BIOS is detected, entering into the
66	  "Firmware First" mode.
67
68	  It should be noticed that keeping both GHES and a hardware-driven
69	  error mechanism won't work well, as BIOS will race with OS, while
70	  reading the error registers. So, if you want to not use "Firmware
71	  first" GHES error mechanism, you should disable GHES either at
72	  compilation time or by passing "ghes.disable=1" Kernel parameter
73	  at boot time.
74
75	  In doubt, say 'Y'.
76
77config EDAC_AMD64
78	tristate "AMD64 (Opteron, Athlon64)"
79	depends on AMD_NB && EDAC_DECODE_MCE
80	help
81	  Support for error detection and correction of DRAM ECC errors on
82	  the AMD64 families (>= K8) of memory controllers.
83
84config EDAC_AMD64_ERROR_INJECTION
85	bool "Sysfs HW Error injection facilities"
86	depends on EDAC_AMD64
87	help
88	  Recent Opterons (Family 10h and later) provide for Memory Error
89	  Injection into the ECC detection circuits. The amd64_edac module
90	  allows the operator/user to inject Uncorrectable and Correctable
91	  errors into DRAM.
92
93	  When enabled, in each of the respective memory controller directories
94	  (/sys/devices/system/edac/mc/mcX), there are 3 input files:
95
96	  - inject_section (0..3, 16-byte section of 64-byte cacheline),
97	  - inject_word (0..8, 16-bit word of 16-byte section),
98	  - inject_ecc_vector (hex ecc vector: select bits of inject word)
99
100	  In addition, there are two control files, inject_read and inject_write,
101	  which trigger the DRAM ECC Read and Write respectively.
102
103config EDAC_AMD76X
104	tristate "AMD 76x (760, 762, 768)"
105	depends on PCI && X86_32
106	help
107	  Support for error detection and correction on the AMD 76x
108	  series of chipsets used with the Athlon processor.
109
110config EDAC_E7XXX
111	tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
112	depends on PCI && X86_32
113	help
114	  Support for error detection and correction on the Intel
115	  E7205, E7500, E7501 and E7505 server chipsets.
116
117config EDAC_E752X
118	tristate "Intel e752x (e7520, e7525, e7320) and 3100"
119	depends on PCI && X86
120	help
121	  Support for error detection and correction on the Intel
122	  E7520, E7525, E7320 server chipsets.
123
124config EDAC_I82443BXGX
125	tristate "Intel 82443BX/GX (440BX/GX)"
126	depends on PCI && X86_32
127	depends on BROKEN
128	help
129	  Support for error detection and correction on the Intel
130	  82443BX/GX memory controllers (440BX/GX chipsets).
131
132config EDAC_I82875P
133	tristate "Intel 82875p (D82875P, E7210)"
134	depends on PCI && X86_32
135	help
136	  Support for error detection and correction on the Intel
137	  DP82785P and E7210 server chipsets.
138
139config EDAC_I82975X
140	tristate "Intel 82975x (D82975x)"
141	depends on PCI && X86
142	help
143	  Support for error detection and correction on the Intel
144	  DP82975x server chipsets.
145
146config EDAC_I3000
147	tristate "Intel 3000/3010"
148	depends on PCI && X86
149	help
150	  Support for error detection and correction on the Intel
151	  3000 and 3010 server chipsets.
152
153config EDAC_I3200
154	tristate "Intel 3200"
155	depends on PCI && X86
156	help
157	  Support for error detection and correction on the Intel
158	  3200 and 3210 server chipsets.
159
160config EDAC_IE31200
161	tristate "Intel e312xx"
162	depends on PCI && X86
163	help
164	  Support for error detection and correction on the Intel
165	  E3-1200 based DRAM controllers.
166
167config EDAC_X38
168	tristate "Intel X38"
169	depends on PCI && X86
170	help
171	  Support for error detection and correction on the Intel
172	  X38 server chipsets.
173
174config EDAC_I5400
175	tristate "Intel 5400 (Seaburg) chipsets"
176	depends on PCI && X86
177	help
178	  Support for error detection and correction the Intel
179	  i5400 MCH chipset (Seaburg).
180
181config EDAC_I7CORE
182	tristate "Intel i7 Core (Nehalem) processors"
183	depends on PCI && X86 && X86_MCE_INTEL
184	help
185	  Support for error detection and correction the Intel
186	  i7 Core (Nehalem) Integrated Memory Controller that exists on
187	  newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
188	  and Xeon 55xx processors.
189
190config EDAC_I82860
191	tristate "Intel 82860"
192	depends on PCI && X86_32
193	help
194	  Support for error detection and correction on the Intel
195	  82860 chipset.
196
197config EDAC_R82600
198	tristate "Radisys 82600 embedded chipset"
199	depends on PCI && X86_32
200	help
201	  Support for error detection and correction on the Radisys
202	  82600 embedded chipset.
203
204config EDAC_I5000
205	tristate "Intel Greencreek/Blackford chipset"
206	depends on X86 && PCI
207	help
208	  Support for error detection and correction the Intel
209	  Greekcreek/Blackford chipsets.
210
211config EDAC_I5100
212	tristate "Intel San Clemente MCH"
213	depends on X86 && PCI
214	help
215	  Support for error detection and correction the Intel
216	  San Clemente MCH.
217
218config EDAC_I7300
219	tristate "Intel Clarksboro MCH"
220	depends on X86 && PCI
221	help
222	  Support for error detection and correction the Intel
223	  Clarksboro MCH (Intel 7300 chipset).
224
225config EDAC_SBRIDGE
226	tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC"
227	depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
228	help
229	  Support for error detection and correction the Intel
230	  Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers.
231
232config EDAC_SKX
233	tristate "Intel Skylake server Integrated MC"
234	depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
235	help
236	  Support for error detection and correction the Intel
237	  Skylake server Integrated Memory Controllers.
238
239config EDAC_PND2
240	tristate "Intel Pondicherry2"
241	depends on PCI && X86_64 && X86_MCE_INTEL
242	help
243	  Support for error detection and correction on the Intel
244	  Pondicherry2 Integrated Memory Controller. This SoC IP is
245	  first used on the Apollo Lake platform and Denverton
246	  micro-server but may appear on others in the future.
247
248config EDAC_MPC85XX
249	tristate "Freescale MPC83xx / MPC85xx"
250	depends on FSL_SOC
251	help
252	  Support for error detection and correction on the Freescale
253	  MPC8349, MPC8560, MPC8540, MPC8548, T4240
254
255config EDAC_LAYERSCAPE
256	tristate "Freescale Layerscape DDR"
257	depends on ARCH_LAYERSCAPE
258	help
259	  Support for error detection and correction on Freescale memory
260	  controllers on Layerscape SoCs.
261
262config EDAC_MV64X60
263	tristate "Marvell MV64x60"
264	depends on MV64X60
265	help
266	  Support for error detection and correction on the Marvell
267	  MV64360 and MV64460 chipsets.
268
269config EDAC_PASEMI
270	tristate "PA Semi PWRficient"
271	depends on PPC_PASEMI && PCI
272	help
273	  Support for error detection and correction on PA Semi
274	  PWRficient.
275
276config EDAC_CELL
277	tristate "Cell Broadband Engine memory controller"
278	depends on PPC_CELL_COMMON
279	help
280	  Support for error detection and correction on the
281	  Cell Broadband Engine internal memory controller
282	  on platform without a hypervisor
283
284config EDAC_PPC4XX
285	tristate "PPC4xx IBM DDR2 Memory Controller"
286	depends on 4xx
287	help
288	  This enables support for EDAC on the ECC memory used
289	  with the IBM DDR2 memory controller found in various
290	  PowerPC 4xx embedded processors such as the 405EX[r],
291	  440SP, 440SPe, 460EX, 460GT and 460SX.
292
293config EDAC_AMD8131
294	tristate "AMD8131 HyperTransport PCI-X Tunnel"
295	depends on PCI && PPC_MAPLE
296	help
297	  Support for error detection and correction on the
298	  AMD8131 HyperTransport PCI-X Tunnel chip.
299	  Note, add more Kconfig dependency if it's adopted
300	  on some machine other than Maple.
301
302config EDAC_AMD8111
303	tristate "AMD8111 HyperTransport I/O Hub"
304	depends on PCI && PPC_MAPLE
305	help
306	  Support for error detection and correction on the
307	  AMD8111 HyperTransport I/O Hub chip.
308	  Note, add more Kconfig dependency if it's adopted
309	  on some machine other than Maple.
310
311config EDAC_CPC925
312	tristate "IBM CPC925 Memory Controller (PPC970FX)"
313	depends on PPC64
314	help
315	  Support for error detection and correction on the
316	  IBM CPC925 Bridge and Memory Controller, which is
317	  a companion chip to the PowerPC 970 family of
318	  processors.
319
320config EDAC_TILE
321	tristate "Tilera Memory Controller"
322	depends on TILE
323	default y
324	help
325	  Support for error detection and correction on the
326	  Tilera memory controller.
327
328config EDAC_HIGHBANK_MC
329	tristate "Highbank Memory Controller"
330	depends on ARCH_HIGHBANK
331	help
332	  Support for error detection and correction on the
333	  Calxeda Highbank memory controller.
334
335config EDAC_HIGHBANK_L2
336	tristate "Highbank L2 Cache"
337	depends on ARCH_HIGHBANK
338	help
339	  Support for error detection and correction on the
340	  Calxeda Highbank memory controller.
341
342config EDAC_OCTEON_PC
343	tristate "Cavium Octeon Primary Caches"
344	depends on CPU_CAVIUM_OCTEON
345	help
346	  Support for error detection and correction on the primary caches of
347	  the cnMIPS cores of Cavium Octeon family SOCs.
348
349config EDAC_OCTEON_L2C
350	tristate "Cavium Octeon Secondary Caches (L2C)"
351	depends on CAVIUM_OCTEON_SOC
352	help
353	  Support for error detection and correction on the
354	  Cavium Octeon family of SOCs.
355
356config EDAC_OCTEON_LMC
357	tristate "Cavium Octeon DRAM Memory Controller (LMC)"
358	depends on CAVIUM_OCTEON_SOC
359	help
360	  Support for error detection and correction on the
361	  Cavium Octeon family of SOCs.
362
363config EDAC_OCTEON_PCI
364	tristate "Cavium Octeon PCI Controller"
365	depends on PCI && CAVIUM_OCTEON_SOC
366	help
367	  Support for error detection and correction on the
368	  Cavium Octeon family of SOCs.
369
370config EDAC_THUNDERX
371	tristate "Cavium ThunderX EDAC"
372	depends on ARM64
373	depends on PCI
374	help
375	  Support for error detection and correction on the
376	  Cavium ThunderX memory controllers (LMC), Cache
377	  Coherent Processor Interconnect (CCPI) and L2 cache
378	  blocks (TAD, CBC, MCI).
379
380config EDAC_ALTERA
381	bool "Altera SOCFPGA ECC"
382	depends on EDAC=y && ARCH_SOCFPGA
383	help
384	  Support for error detection and correction on the
385	  Altera SOCs. This must be selected for SDRAM ECC.
386	  Note that the preloader must initialize the SDRAM
387	  before loading the kernel.
388
389config EDAC_ALTERA_L2C
390	bool "Altera L2 Cache ECC"
391	depends on EDAC_ALTERA=y && CACHE_L2X0
392	help
393	  Support for error detection and correction on the
394	  Altera L2 cache Memory for Altera SoCs. This option
395	  requires L2 cache.
396
397config EDAC_ALTERA_OCRAM
398	bool "Altera On-Chip RAM ECC"
399	depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR
400	help
401	  Support for error detection and correction on the
402	  Altera On-Chip RAM Memory for Altera SoCs.
403
404config EDAC_ALTERA_ETHERNET
405	bool "Altera Ethernet FIFO ECC"
406	depends on EDAC_ALTERA=y
407	help
408	  Support for error detection and correction on the
409	  Altera Ethernet FIFO Memory for Altera SoCs.
410
411config EDAC_ALTERA_NAND
412	bool "Altera NAND FIFO ECC"
413	depends on EDAC_ALTERA=y && MTD_NAND_DENALI
414	help
415	  Support for error detection and correction on the
416	  Altera NAND FIFO Memory for Altera SoCs.
417
418config EDAC_ALTERA_DMA
419	bool "Altera DMA FIFO ECC"
420	depends on EDAC_ALTERA=y && PL330_DMA=y
421	help
422	  Support for error detection and correction on the
423	  Altera DMA FIFO Memory for Altera SoCs.
424
425config EDAC_ALTERA_USB
426	bool "Altera USB FIFO ECC"
427	depends on EDAC_ALTERA=y && USB_DWC2
428	help
429	  Support for error detection and correction on the
430	  Altera USB FIFO Memory for Altera SoCs.
431
432config EDAC_ALTERA_QSPI
433	bool "Altera QSPI FIFO ECC"
434	depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI
435	help
436	  Support for error detection and correction on the
437	  Altera QSPI FIFO Memory for Altera SoCs.
438
439config EDAC_ALTERA_SDMMC
440	bool "Altera SDMMC FIFO ECC"
441	depends on EDAC_ALTERA=y && MMC_DW
442	help
443	  Support for error detection and correction on the
444	  Altera SDMMC FIFO Memory for Altera SoCs.
445
446config EDAC_SYNOPSYS
447	tristate "Synopsys DDR Memory Controller"
448	depends on ARCH_ZYNQ
449	help
450	  Support for error detection and correction on the Synopsys DDR
451	  memory controller.
452
453config EDAC_XGENE
454	tristate "APM X-Gene SoC"
455	depends on (ARM64 || COMPILE_TEST)
456	help
457	  Support for error detection and correction on the
458	  APM X-Gene family of SOCs.
459
460endif # EDAC
461