1# 2# EDAC Kconfig 3# Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com 4# Licensed and distributed under the GPL 5 6config EDAC_ATOMIC_SCRUB 7 bool 8 9config EDAC_SUPPORT 10 bool 11 12menuconfig EDAC 13 tristate "EDAC (Error Detection And Correction) reporting" 14 depends on HAS_IOMEM && EDAC_SUPPORT && RAS 15 help 16 EDAC is a subsystem along with hardware-specific drivers designed to 17 report hardware errors. These are low-level errors that are reported 18 in the CPU or supporting chipset or other subsystems: 19 memory errors, cache errors, PCI errors, thermal throttling, etc.. 20 If unsure, select 'Y'. 21 22 The mailing list for the EDAC project is linux-edac@vger.kernel.org. 23 24if EDAC 25 26config EDAC_LEGACY_SYSFS 27 bool "EDAC legacy sysfs" 28 default y 29 help 30 Enable the compatibility sysfs nodes. 31 Use 'Y' if your edac utilities aren't ported to work with the newer 32 structures. 33 34config EDAC_DEBUG 35 bool "Debugging" 36 select DEBUG_FS 37 help 38 This turns on debugging information for the entire EDAC subsystem. 39 You do so by inserting edac_module with "edac_debug_level=x." Valid 40 levels are 0-4 (from low to high) and by default it is set to 2. 41 Usually you should select 'N' here. 42 43config EDAC_DECODE_MCE 44 tristate "Decode MCEs in human-readable form (only on AMD for now)" 45 depends on CPU_SUP_AMD && X86_MCE_AMD 46 default y 47 help 48 Enable this option if you want to decode Machine Check Exceptions 49 occurring on your machine in human-readable form. 50 51 You should definitely say Y here in case you want to decode MCEs 52 which occur really early upon boot, before the module infrastructure 53 has been initialized. 54 55config EDAC_GHES 56 tristate "Output ACPI APEI/GHES BIOS detected errors via EDAC" 57 depends on ACPI_APEI_GHES 58 select UEFI_CPER 59 help 60 Not all machines support hardware-driven error report. Some of those 61 provide a BIOS-driven error report mechanism via ACPI, using the 62 APEI/GHES driver. By enabling this option, the error reports provided 63 by GHES are sent to userspace via the EDAC API. 64 65 When this option is enabled, it will disable the hardware-driven 66 mechanisms, if a GHES BIOS is detected, entering into the 67 "Firmware First" mode. 68 69 It should be noticed that keeping both GHES and a hardware-driven 70 error mechanism won't work well, as BIOS will race with OS, while 71 reading the error registers. So, if you want to not use "Firmware 72 first" GHES error mechanism, you should disable GHES either at 73 compilation time or by passing "ghes.disable=1" Kernel parameter 74 at boot time. 75 76 In doubt, say 'Y'. 77 78config EDAC_AMD64 79 tristate "AMD64 (Opteron, Athlon64)" 80 depends on AMD_NB && EDAC_DECODE_MCE 81 help 82 Support for error detection and correction of DRAM ECC errors on 83 the AMD64 families (>= K8) of memory controllers. 84 85 When EDAC_DEBUG is enabled, hardware error injection facilities 86 through sysfs are available: 87 88 AMD CPUs up to and excluding family 0x17 provide for Memory 89 Error Injection into the ECC detection circuits. The amd64_edac 90 module allows the operator/user to inject Uncorrectable and 91 Correctable errors into DRAM. 92 93 When enabled, in each of the respective memory controller directories 94 (/sys/devices/system/edac/mc/mcX), there are 3 input files: 95 96 - inject_section (0..3, 16-byte section of 64-byte cacheline), 97 - inject_word (0..8, 16-bit word of 16-byte section), 98 - inject_ecc_vector (hex ecc vector: select bits of inject word) 99 100 In addition, there are two control files, inject_read and inject_write, 101 which trigger the DRAM ECC Read and Write respectively. 102 103config EDAC_AL_MC 104 tristate "Amazon's Annapurna Lab Memory Controller" 105 depends on (ARCH_ALPINE || COMPILE_TEST) 106 help 107 Support for error detection and correction for Amazon's Annapurna 108 Labs Alpine chips which allow 1 bit correction and 2 bits detection. 109 110config EDAC_AMD76X 111 tristate "AMD 76x (760, 762, 768)" 112 depends on PCI && X86_32 113 help 114 Support for error detection and correction on the AMD 76x 115 series of chipsets used with the Athlon processor. 116 117config EDAC_E7XXX 118 tristate "Intel e7xxx (e7205, e7500, e7501, e7505)" 119 depends on PCI && X86_32 120 help 121 Support for error detection and correction on the Intel 122 E7205, E7500, E7501 and E7505 server chipsets. 123 124config EDAC_E752X 125 tristate "Intel e752x (e7520, e7525, e7320) and 3100" 126 depends on PCI && X86 127 help 128 Support for error detection and correction on the Intel 129 E7520, E7525, E7320 server chipsets. 130 131config EDAC_I82443BXGX 132 tristate "Intel 82443BX/GX (440BX/GX)" 133 depends on PCI && X86_32 134 depends on BROKEN 135 help 136 Support for error detection and correction on the Intel 137 82443BX/GX memory controllers (440BX/GX chipsets). 138 139config EDAC_I82875P 140 tristate "Intel 82875p (D82875P, E7210)" 141 depends on PCI && X86_32 142 help 143 Support for error detection and correction on the Intel 144 DP82785P and E7210 server chipsets. 145 146config EDAC_I82975X 147 tristate "Intel 82975x (D82975x)" 148 depends on PCI && X86 149 help 150 Support for error detection and correction on the Intel 151 DP82975x server chipsets. 152 153config EDAC_I3000 154 tristate "Intel 3000/3010" 155 depends on PCI && X86 156 help 157 Support for error detection and correction on the Intel 158 3000 and 3010 server chipsets. 159 160config EDAC_I3200 161 tristate "Intel 3200" 162 depends on PCI && X86 163 help 164 Support for error detection and correction on the Intel 165 3200 and 3210 server chipsets. 166 167config EDAC_IE31200 168 tristate "Intel e312xx" 169 depends on PCI && X86 170 help 171 Support for error detection and correction on the Intel 172 E3-1200 based DRAM controllers. 173 174config EDAC_X38 175 tristate "Intel X38" 176 depends on PCI && X86 177 help 178 Support for error detection and correction on the Intel 179 X38 server chipsets. 180 181config EDAC_I5400 182 tristate "Intel 5400 (Seaburg) chipsets" 183 depends on PCI && X86 184 help 185 Support for error detection and correction the Intel 186 i5400 MCH chipset (Seaburg). 187 188config EDAC_I7CORE 189 tristate "Intel i7 Core (Nehalem) processors" 190 depends on PCI && X86 && X86_MCE_INTEL 191 help 192 Support for error detection and correction the Intel 193 i7 Core (Nehalem) Integrated Memory Controller that exists on 194 newer processors like i7 Core, i7 Core Extreme, Xeon 35xx 195 and Xeon 55xx processors. 196 197config EDAC_I82860 198 tristate "Intel 82860" 199 depends on PCI && X86_32 200 help 201 Support for error detection and correction on the Intel 202 82860 chipset. 203 204config EDAC_R82600 205 tristate "Radisys 82600 embedded chipset" 206 depends on PCI && X86_32 207 help 208 Support for error detection and correction on the Radisys 209 82600 embedded chipset. 210 211config EDAC_I5000 212 tristate "Intel Greencreek/Blackford chipset" 213 depends on X86 && PCI 214 depends on BROKEN 215 help 216 Support for error detection and correction the Intel 217 Greekcreek/Blackford chipsets. 218 219config EDAC_I5100 220 tristate "Intel San Clemente MCH" 221 depends on X86 && PCI 222 help 223 Support for error detection and correction the Intel 224 San Clemente MCH. 225 226config EDAC_I7300 227 tristate "Intel Clarksboro MCH" 228 depends on X86 && PCI 229 help 230 Support for error detection and correction the Intel 231 Clarksboro MCH (Intel 7300 chipset). 232 233config EDAC_SBRIDGE 234 tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC" 235 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG 236 help 237 Support for error detection and correction the Intel 238 Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers. 239 240config EDAC_SKX 241 tristate "Intel Skylake server Integrated MC" 242 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI 243 depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y 244 select DMI 245 select ACPI_ADXL 246 help 247 Support for error detection and correction the Intel 248 Skylake server Integrated Memory Controllers. If your 249 system has non-volatile DIMMs you should also manually 250 select CONFIG_ACPI_NFIT. 251 252config EDAC_I10NM 253 tristate "Intel 10nm server Integrated MC" 254 depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI 255 depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y 256 select DMI 257 select ACPI_ADXL 258 help 259 Support for error detection and correction the Intel 260 10nm server Integrated Memory Controllers. If your 261 system has non-volatile DIMMs you should also manually 262 select CONFIG_ACPI_NFIT. 263 264config EDAC_PND2 265 tristate "Intel Pondicherry2" 266 depends on PCI && X86_64 && X86_MCE_INTEL 267 select P2SB if X86 268 help 269 Support for error detection and correction on the Intel 270 Pondicherry2 Integrated Memory Controller. This SoC IP is 271 first used on the Apollo Lake platform and Denverton 272 micro-server but may appear on others in the future. 273 274config EDAC_IGEN6 275 tristate "Intel client SoC Integrated MC" 276 depends on PCI && PCI_MMCONFIG && ARCH_HAVE_NMI_SAFE_CMPXCHG 277 depends on X86_64 && X86_MCE_INTEL 278 help 279 Support for error detection and correction on the Intel 280 client SoC Integrated Memory Controller using In-Band ECC IP. 281 This In-Band ECC is first used on the Elkhart Lake SoC but 282 may appear on others in the future. 283 284config EDAC_MPC85XX 285 bool "Freescale MPC83xx / MPC85xx" 286 depends on FSL_SOC && EDAC=y 287 help 288 Support for error detection and correction on the Freescale 289 MPC8349, MPC8560, MPC8540, MPC8548, T4240 290 291config EDAC_LAYERSCAPE 292 tristate "Freescale Layerscape DDR" 293 depends on ARCH_LAYERSCAPE || SOC_LS1021A 294 help 295 Support for error detection and correction on Freescale memory 296 controllers on Layerscape SoCs. 297 298config EDAC_PASEMI 299 tristate "PA Semi PWRficient" 300 depends on PPC_PASEMI && PCI 301 help 302 Support for error detection and correction on PA Semi 303 PWRficient. 304 305config EDAC_CELL 306 tristate "Cell Broadband Engine memory controller" 307 depends on PPC_CELL_COMMON 308 help 309 Support for error detection and correction on the 310 Cell Broadband Engine internal memory controller 311 on platform without a hypervisor 312 313config EDAC_PPC4XX 314 tristate "PPC4xx IBM DDR2 Memory Controller" 315 depends on 4xx 316 help 317 This enables support for EDAC on the ECC memory used 318 with the IBM DDR2 memory controller found in various 319 PowerPC 4xx embedded processors such as the 405EX[r], 320 440SP, 440SPe, 460EX, 460GT and 460SX. 321 322config EDAC_AMD8131 323 tristate "AMD8131 HyperTransport PCI-X Tunnel" 324 depends on PCI && PPC_MAPLE 325 help 326 Support for error detection and correction on the 327 AMD8131 HyperTransport PCI-X Tunnel chip. 328 Note, add more Kconfig dependency if it's adopted 329 on some machine other than Maple. 330 331config EDAC_AMD8111 332 tristate "AMD8111 HyperTransport I/O Hub" 333 depends on PCI && PPC_MAPLE 334 help 335 Support for error detection and correction on the 336 AMD8111 HyperTransport I/O Hub chip. 337 Note, add more Kconfig dependency if it's adopted 338 on some machine other than Maple. 339 340config EDAC_CPC925 341 tristate "IBM CPC925 Memory Controller (PPC970FX)" 342 depends on PPC64 343 help 344 Support for error detection and correction on the 345 IBM CPC925 Bridge and Memory Controller, which is 346 a companion chip to the PowerPC 970 family of 347 processors. 348 349config EDAC_HIGHBANK_MC 350 tristate "Highbank Memory Controller" 351 depends on ARCH_HIGHBANK 352 help 353 Support for error detection and correction on the 354 Calxeda Highbank memory controller. 355 356config EDAC_HIGHBANK_L2 357 tristate "Highbank L2 Cache" 358 depends on ARCH_HIGHBANK 359 help 360 Support for error detection and correction on the 361 Calxeda Highbank memory controller. 362 363config EDAC_OCTEON_PC 364 tristate "Cavium Octeon Primary Caches" 365 depends on CPU_CAVIUM_OCTEON 366 help 367 Support for error detection and correction on the primary caches of 368 the cnMIPS cores of Cavium Octeon family SOCs. 369 370config EDAC_OCTEON_L2C 371 tristate "Cavium Octeon Secondary Caches (L2C)" 372 depends on CAVIUM_OCTEON_SOC 373 help 374 Support for error detection and correction on the 375 Cavium Octeon family of SOCs. 376 377config EDAC_OCTEON_LMC 378 tristate "Cavium Octeon DRAM Memory Controller (LMC)" 379 depends on CAVIUM_OCTEON_SOC 380 help 381 Support for error detection and correction on the 382 Cavium Octeon family of SOCs. 383 384config EDAC_OCTEON_PCI 385 tristate "Cavium Octeon PCI Controller" 386 depends on PCI && CAVIUM_OCTEON_SOC 387 help 388 Support for error detection and correction on the 389 Cavium Octeon family of SOCs. 390 391config EDAC_THUNDERX 392 tristate "Cavium ThunderX EDAC" 393 depends on ARM64 394 depends on PCI 395 help 396 Support for error detection and correction on the 397 Cavium ThunderX memory controllers (LMC), Cache 398 Coherent Processor Interconnect (CCPI) and L2 cache 399 blocks (TAD, CBC, MCI). 400 401config EDAC_ALTERA 402 bool "Altera SOCFPGA ECC" 403 depends on EDAC=y && ARCH_INTEL_SOCFPGA 404 help 405 Support for error detection and correction on the 406 Altera SOCs. This is the global enable for the 407 various Altera peripherals. 408 409config EDAC_ALTERA_SDRAM 410 bool "Altera SDRAM ECC" 411 depends on EDAC_ALTERA=y 412 help 413 Support for error detection and correction on the 414 Altera SDRAM Memory for Altera SoCs. Note that the 415 preloader must initialize the SDRAM before loading 416 the kernel. 417 418config EDAC_ALTERA_L2C 419 bool "Altera L2 Cache ECC" 420 depends on EDAC_ALTERA=y && CACHE_L2X0 421 help 422 Support for error detection and correction on the 423 Altera L2 cache Memory for Altera SoCs. This option 424 requires L2 cache. 425 426config EDAC_ALTERA_OCRAM 427 bool "Altera On-Chip RAM ECC" 428 depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR 429 help 430 Support for error detection and correction on the 431 Altera On-Chip RAM Memory for Altera SoCs. 432 433config EDAC_ALTERA_ETHERNET 434 bool "Altera Ethernet FIFO ECC" 435 depends on EDAC_ALTERA=y 436 help 437 Support for error detection and correction on the 438 Altera Ethernet FIFO Memory for Altera SoCs. 439 440config EDAC_ALTERA_NAND 441 bool "Altera NAND FIFO ECC" 442 depends on EDAC_ALTERA=y && MTD_NAND_DENALI 443 help 444 Support for error detection and correction on the 445 Altera NAND FIFO Memory for Altera SoCs. 446 447config EDAC_ALTERA_DMA 448 bool "Altera DMA FIFO ECC" 449 depends on EDAC_ALTERA=y && PL330_DMA=y 450 help 451 Support for error detection and correction on the 452 Altera DMA FIFO Memory for Altera SoCs. 453 454config EDAC_ALTERA_USB 455 bool "Altera USB FIFO ECC" 456 depends on EDAC_ALTERA=y && USB_DWC2 457 help 458 Support for error detection and correction on the 459 Altera USB FIFO Memory for Altera SoCs. 460 461config EDAC_ALTERA_QSPI 462 bool "Altera QSPI FIFO ECC" 463 depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI 464 help 465 Support for error detection and correction on the 466 Altera QSPI FIFO Memory for Altera SoCs. 467 468config EDAC_ALTERA_SDMMC 469 bool "Altera SDMMC FIFO ECC" 470 depends on EDAC_ALTERA=y && MMC_DW 471 help 472 Support for error detection and correction on the 473 Altera SDMMC FIFO Memory for Altera SoCs. 474 475config EDAC_SIFIVE 476 bool "Sifive platform EDAC driver" 477 depends on EDAC=y && SIFIVE_CCACHE 478 help 479 Support for error detection and correction on the SiFive SoCs. 480 481config EDAC_ARMADA_XP 482 bool "Marvell Armada XP DDR and L2 Cache ECC" 483 depends on MACH_MVEBU_V7 484 help 485 Support for error correction and detection on the Marvell Aramada XP 486 DDR RAM and L2 cache controllers. 487 488config EDAC_SYNOPSYS 489 tristate "Synopsys DDR Memory Controller" 490 depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || ARCH_MXC 491 help 492 Support for error detection and correction on the Synopsys DDR 493 memory controller. 494 495config EDAC_XGENE 496 tristate "APM X-Gene SoC" 497 depends on (ARM64 || COMPILE_TEST) 498 help 499 Support for error detection and correction on the 500 APM X-Gene family of SOCs. 501 502config EDAC_TI 503 tristate "Texas Instruments DDR3 ECC Controller" 504 depends on ARCH_KEYSTONE || SOC_DRA7XX 505 help 506 Support for error detection and correction on the TI SoCs. 507 508config EDAC_QCOM 509 tristate "QCOM EDAC Controller" 510 depends on ARCH_QCOM && QCOM_LLCC 511 help 512 Support for error detection and correction on the 513 Qualcomm Technologies, Inc. SoCs. 514 515 This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs). 516 As of now, it supports error reporting for Last Level Cache Controller (LLCC) 517 of Tag RAM and Data RAM. 518 519 For debugging issues having to do with stability and overall system 520 health, you should probably say 'Y' here. 521 522config EDAC_ASPEED 523 tristate "Aspeed AST BMC SoC" 524 depends on ARCH_ASPEED 525 help 526 Support for error detection and correction on the Aspeed AST BMC SoC. 527 528 First, ECC must be configured in the bootloader. Then, this driver 529 will expose error counters via the EDAC kernel framework. 530 531config EDAC_BLUEFIELD 532 tristate "Mellanox BlueField Memory ECC" 533 depends on ARM64 && ((MELLANOX_PLATFORM && ACPI) || COMPILE_TEST) 534 help 535 Support for error detection and correction on the 536 Mellanox BlueField SoCs. 537 538config EDAC_DMC520 539 tristate "ARM DMC-520 ECC" 540 depends on ARM64 541 help 542 Support for error detection and correction on the 543 SoCs with ARM DMC-520 DRAM controller. 544 545config EDAC_ZYNQMP 546 tristate "Xilinx ZynqMP OCM Controller" 547 depends on ARCH_ZYNQMP || COMPILE_TEST 548 help 549 This driver supports error detection and correction for the 550 Xilinx ZynqMP OCM (On Chip Memory) controller. It can also be 551 built as a module. In that case it will be called zynqmp_edac. 552 553config EDAC_NPCM 554 tristate "Nuvoton NPCM DDR Memory Controller" 555 depends on (ARCH_NPCM || COMPILE_TEST) 556 help 557 Support for error detection and correction on the Nuvoton NPCM DDR 558 memory controller. 559 560 The memory controller supports single bit error correction, double bit 561 error detection (in-line ECC in which a section 1/8th of the memory 562 device used to store data is used for ECC storage). 563 564endif # EDAC 565