1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Cirrus Logic EP93xx timer driver.
4 * Copyright (C) 2021 Nikita Shubin <nikita.shubin@maquefel.me>
5 *
6 * Based on a rewrite of arch/arm/mach-ep93xx/timer.c:
7 */
8
9 #include <linux/clockchips.h>
10 #include <linux/clocksource.h>
11 #include <linux/init.h>
12 #include <linux/interrupt.h>
13 #include <linux/io.h>
14 #include <linux/io-64-nonatomic-lo-hi.h>
15 #include <linux/irq.h>
16 #include <linux/kernel.h>
17 #include <linux/of_address.h>
18 #include <linux/of_irq.h>
19 #include <linux/sched_clock.h>
20
21 #include <asm/mach/time.h>
22
23 /*************************************************************************
24 * Timer handling for EP93xx
25 *************************************************************************
26 * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
27 * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
28 * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
29 * is free-running, and can't generate interrupts.
30 *
31 * The 508 kHz timers are ideal for use for the timer interrupt, as the
32 * most common values of HZ divide 508 kHz nicely. We pick the 32 bit
33 * timer (timer 3) to get as long sleep intervals as possible when using
34 * CONFIG_NO_HZ.
35 *
36 * The higher clock rate of timer 4 makes it a better choice than the
37 * other timers for use as clock source and for sched_clock(), providing
38 * a stable 40 bit time base.
39 *************************************************************************
40 */
41
42 #define EP93XX_TIMER1_LOAD 0x00
43 #define EP93XX_TIMER1_VALUE 0x04
44 #define EP93XX_TIMER1_CONTROL 0x08
45 #define EP93XX_TIMER123_CONTROL_ENABLE BIT(7)
46 #define EP93XX_TIMER123_CONTROL_MODE BIT(6)
47 #define EP93XX_TIMER123_CONTROL_CLKSEL BIT(3)
48 #define EP93XX_TIMER1_CLEAR 0x0c
49 #define EP93XX_TIMER2_LOAD 0x20
50 #define EP93XX_TIMER2_VALUE 0x24
51 #define EP93XX_TIMER2_CONTROL 0x28
52 #define EP93XX_TIMER2_CLEAR 0x2c
53 /*
54 * This read-only register contains the low word of the time stamp debug timer
55 * ( Timer4). When this register is read, the high byte of the Timer4 counter is
56 * saved in the Timer4ValueHigh register.
57 */
58 #define EP93XX_TIMER4_VALUE_LOW 0x60
59 #define EP93XX_TIMER4_VALUE_HIGH 0x64
60 #define EP93XX_TIMER4_VALUE_HIGH_ENABLE BIT(8)
61 #define EP93XX_TIMER3_LOAD 0x80
62 #define EP93XX_TIMER3_VALUE 0x84
63 #define EP93XX_TIMER3_CONTROL 0x88
64 #define EP93XX_TIMER3_CLEAR 0x8c
65
66 #define EP93XX_TIMER123_RATE 508469
67 #define EP93XX_TIMER4_RATE 983040
68
69 struct ep93xx_tcu {
70 void __iomem *base;
71 };
72
73 static struct ep93xx_tcu *ep93xx_tcu;
74
ep93xx_clocksource_read(struct clocksource * c)75 static u64 ep93xx_clocksource_read(struct clocksource *c)
76 {
77 struct ep93xx_tcu *tcu = ep93xx_tcu;
78
79 return lo_hi_readq(tcu->base + EP93XX_TIMER4_VALUE_LOW) & GENMASK_ULL(39, 0);
80 }
81
ep93xx_read_sched_clock(void)82 static u64 notrace ep93xx_read_sched_clock(void)
83 {
84 return ep93xx_clocksource_read(NULL);
85 }
86
ep93xx_clkevt_set_next_event(unsigned long next,struct clock_event_device * evt)87 static int ep93xx_clkevt_set_next_event(unsigned long next,
88 struct clock_event_device *evt)
89 {
90 struct ep93xx_tcu *tcu = ep93xx_tcu;
91 /* Default mode: periodic, off, 508 kHz */
92 u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
93 EP93XX_TIMER123_CONTROL_CLKSEL;
94
95 /* Clear timer */
96 writel(tmode, tcu->base + EP93XX_TIMER3_CONTROL);
97
98 /* Set next event */
99 writel(next, tcu->base + EP93XX_TIMER3_LOAD);
100 writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
101 tcu->base + EP93XX_TIMER3_CONTROL);
102 return 0;
103 }
104
ep93xx_clkevt_shutdown(struct clock_event_device * evt)105 static int ep93xx_clkevt_shutdown(struct clock_event_device *evt)
106 {
107 struct ep93xx_tcu *tcu = ep93xx_tcu;
108 /* Disable timer */
109 writel(0, tcu->base + EP93XX_TIMER3_CONTROL);
110
111 return 0;
112 }
113
114 static struct clock_event_device ep93xx_clockevent = {
115 .name = "timer1",
116 .features = CLOCK_EVT_FEAT_ONESHOT,
117 .set_state_shutdown = ep93xx_clkevt_shutdown,
118 .set_state_oneshot = ep93xx_clkevt_shutdown,
119 .tick_resume = ep93xx_clkevt_shutdown,
120 .set_next_event = ep93xx_clkevt_set_next_event,
121 .rating = 300,
122 };
123
ep93xx_timer_interrupt(int irq,void * dev_id)124 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
125 {
126 struct ep93xx_tcu *tcu = ep93xx_tcu;
127 struct clock_event_device *evt = dev_id;
128
129 /* Writing any value clears the timer interrupt */
130 writel(1, tcu->base + EP93XX_TIMER3_CLEAR);
131
132 evt->event_handler(evt);
133
134 return IRQ_HANDLED;
135 }
136
ep93xx_timer_of_init(struct device_node * np)137 static int __init ep93xx_timer_of_init(struct device_node *np)
138 {
139 int irq;
140 unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
141 struct ep93xx_tcu *tcu;
142 int ret;
143
144 tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
145 if (!tcu)
146 return -ENOMEM;
147
148 tcu->base = of_iomap(np, 0);
149 if (!tcu->base) {
150 pr_err("Can't remap registers\n");
151 ret = -ENXIO;
152 goto out_free;
153 }
154
155 ep93xx_tcu = tcu;
156
157 irq = irq_of_parse_and_map(np, 0);
158 if (!irq) {
159 ret = -EINVAL;
160 pr_err("EP93XX Timer Can't parse IRQ %d", irq);
161 goto out_free;
162 }
163
164 /* Enable and register clocksource and sched_clock on timer 4 */
165 writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
166 tcu->base + EP93XX_TIMER4_VALUE_HIGH);
167 clocksource_mmio_init(NULL, "timer4",
168 EP93XX_TIMER4_RATE, 200, 40,
169 ep93xx_clocksource_read);
170 sched_clock_register(ep93xx_read_sched_clock, 40,
171 EP93XX_TIMER4_RATE);
172
173 /* Set up clockevent on timer 3 */
174 if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
175 &ep93xx_clockevent))
176 pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
177
178 clockevents_config_and_register(&ep93xx_clockevent,
179 EP93XX_TIMER123_RATE,
180 1,
181 UINT_MAX);
182
183 return 0;
184
185 out_free:
186 kfree(tcu);
187 return ret;
188 }
189 TIMER_OF_DECLARE(ep93xx_timer, "cirrus,ep9301-timer", ep93xx_timer_of_init);
190