1 /* 2 * Copyright 2013 Emilio López 3 * 4 * Emilio López <emilio@elopez.com.ar> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 */ 16 17 #include <linux/clk.h> 18 #include <linux/clk-provider.h> 19 #include <linux/clkdev.h> 20 #include <linux/of.h> 21 #include <linux/of_address.h> 22 #include <linux/reset-controller.h> 23 #include <linux/slab.h> 24 #include <linux/spinlock.h> 25 #include <linux/log2.h> 26 27 #include "clk-factors.h" 28 29 static DEFINE_SPINLOCK(clk_lock); 30 31 /** 32 * sun6i_a31_ahb1_clk_setup() - Setup function for a31 ahb1 composite clk 33 */ 34 35 #define SUN6I_AHB1_MAX_PARENTS 4 36 #define SUN6I_AHB1_MUX_PARENT_PLL6 3 37 #define SUN6I_AHB1_MUX_SHIFT 12 38 /* un-shifted mask is what mux_clk expects */ 39 #define SUN6I_AHB1_MUX_MASK 0x3 40 #define SUN6I_AHB1_MUX_GET_PARENT(reg) ((reg >> SUN6I_AHB1_MUX_SHIFT) & \ 41 SUN6I_AHB1_MUX_MASK) 42 43 #define SUN6I_AHB1_DIV_SHIFT 4 44 #define SUN6I_AHB1_DIV_MASK (0x3 << SUN6I_AHB1_DIV_SHIFT) 45 #define SUN6I_AHB1_DIV_GET(reg) ((reg & SUN6I_AHB1_DIV_MASK) >> \ 46 SUN6I_AHB1_DIV_SHIFT) 47 #define SUN6I_AHB1_DIV_SET(reg, div) ((reg & ~SUN6I_AHB1_DIV_MASK) | \ 48 (div << SUN6I_AHB1_DIV_SHIFT)) 49 #define SUN6I_AHB1_PLL6_DIV_SHIFT 6 50 #define SUN6I_AHB1_PLL6_DIV_MASK (0x3 << SUN6I_AHB1_PLL6_DIV_SHIFT) 51 #define SUN6I_AHB1_PLL6_DIV_GET(reg) ((reg & SUN6I_AHB1_PLL6_DIV_MASK) >> \ 52 SUN6I_AHB1_PLL6_DIV_SHIFT) 53 #define SUN6I_AHB1_PLL6_DIV_SET(reg, div) ((reg & ~SUN6I_AHB1_PLL6_DIV_MASK) | \ 54 (div << SUN6I_AHB1_PLL6_DIV_SHIFT)) 55 56 struct sun6i_ahb1_clk { 57 struct clk_hw hw; 58 void __iomem *reg; 59 }; 60 61 #define to_sun6i_ahb1_clk(_hw) container_of(_hw, struct sun6i_ahb1_clk, hw) 62 63 static unsigned long sun6i_ahb1_clk_recalc_rate(struct clk_hw *hw, 64 unsigned long parent_rate) 65 { 66 struct sun6i_ahb1_clk *ahb1 = to_sun6i_ahb1_clk(hw); 67 unsigned long rate; 68 u32 reg; 69 70 /* Fetch the register value */ 71 reg = readl(ahb1->reg); 72 73 /* apply pre-divider first if parent is pll6 */ 74 if (SUN6I_AHB1_MUX_GET_PARENT(reg) == SUN6I_AHB1_MUX_PARENT_PLL6) 75 parent_rate /= SUN6I_AHB1_PLL6_DIV_GET(reg) + 1; 76 77 /* clk divider */ 78 rate = parent_rate >> SUN6I_AHB1_DIV_GET(reg); 79 80 return rate; 81 } 82 83 static long sun6i_ahb1_clk_round(unsigned long rate, u8 *divp, u8 *pre_divp, 84 u8 parent, unsigned long parent_rate) 85 { 86 u8 div, calcp, calcm = 1; 87 88 /* 89 * clock can only divide, so we will never be able to achieve 90 * frequencies higher than the parent frequency 91 */ 92 if (parent_rate && rate > parent_rate) 93 rate = parent_rate; 94 95 div = DIV_ROUND_UP(parent_rate, rate); 96 97 /* calculate pre-divider if parent is pll6 */ 98 if (parent == SUN6I_AHB1_MUX_PARENT_PLL6) { 99 if (div < 4) 100 calcp = 0; 101 else if (div / 2 < 4) 102 calcp = 1; 103 else if (div / 4 < 4) 104 calcp = 2; 105 else 106 calcp = 3; 107 108 calcm = DIV_ROUND_UP(div, 1 << calcp); 109 } else { 110 calcp = __roundup_pow_of_two(div); 111 calcp = calcp > 3 ? 3 : calcp; 112 } 113 114 /* we were asked to pass back divider values */ 115 if (divp) { 116 *divp = calcp; 117 *pre_divp = calcm - 1; 118 } 119 120 return (parent_rate / calcm) >> calcp; 121 } 122 123 static int sun6i_ahb1_clk_determine_rate(struct clk_hw *hw, 124 struct clk_rate_request *req) 125 { 126 struct clk_hw *parent, *best_parent = NULL; 127 int i, num_parents; 128 unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0; 129 130 /* find the parent that can help provide the fastest rate <= rate */ 131 num_parents = clk_hw_get_num_parents(hw); 132 for (i = 0; i < num_parents; i++) { 133 parent = clk_hw_get_parent_by_index(hw, i); 134 if (!parent) 135 continue; 136 if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) 137 parent_rate = clk_hw_round_rate(parent, req->rate); 138 else 139 parent_rate = clk_hw_get_rate(parent); 140 141 child_rate = sun6i_ahb1_clk_round(req->rate, NULL, NULL, i, 142 parent_rate); 143 144 if (child_rate <= req->rate && child_rate > best_child_rate) { 145 best_parent = parent; 146 best = parent_rate; 147 best_child_rate = child_rate; 148 } 149 } 150 151 if (!best_parent) 152 return -EINVAL; 153 154 req->best_parent_hw = best_parent; 155 req->best_parent_rate = best; 156 req->rate = best_child_rate; 157 158 return 0; 159 } 160 161 static int sun6i_ahb1_clk_set_rate(struct clk_hw *hw, unsigned long rate, 162 unsigned long parent_rate) 163 { 164 struct sun6i_ahb1_clk *ahb1 = to_sun6i_ahb1_clk(hw); 165 unsigned long flags; 166 u8 div, pre_div, parent; 167 u32 reg; 168 169 spin_lock_irqsave(&clk_lock, flags); 170 171 reg = readl(ahb1->reg); 172 173 /* need to know which parent is used to apply pre-divider */ 174 parent = SUN6I_AHB1_MUX_GET_PARENT(reg); 175 sun6i_ahb1_clk_round(rate, &div, &pre_div, parent, parent_rate); 176 177 reg = SUN6I_AHB1_DIV_SET(reg, div); 178 reg = SUN6I_AHB1_PLL6_DIV_SET(reg, pre_div); 179 writel(reg, ahb1->reg); 180 181 spin_unlock_irqrestore(&clk_lock, flags); 182 183 return 0; 184 } 185 186 static const struct clk_ops sun6i_ahb1_clk_ops = { 187 .determine_rate = sun6i_ahb1_clk_determine_rate, 188 .recalc_rate = sun6i_ahb1_clk_recalc_rate, 189 .set_rate = sun6i_ahb1_clk_set_rate, 190 }; 191 192 static void __init sun6i_ahb1_clk_setup(struct device_node *node) 193 { 194 struct clk *clk; 195 struct sun6i_ahb1_clk *ahb1; 196 struct clk_mux *mux; 197 const char *clk_name = node->name; 198 const char *parents[SUN6I_AHB1_MAX_PARENTS]; 199 void __iomem *reg; 200 int i; 201 202 reg = of_io_request_and_map(node, 0, of_node_full_name(node)); 203 if (IS_ERR(reg)) 204 return; 205 206 /* we have a mux, we will have >1 parents */ 207 i = of_clk_parent_fill(node, parents, SUN6I_AHB1_MAX_PARENTS); 208 of_property_read_string(node, "clock-output-names", &clk_name); 209 210 ahb1 = kzalloc(sizeof(struct sun6i_ahb1_clk), GFP_KERNEL); 211 if (!ahb1) 212 return; 213 214 mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); 215 if (!mux) { 216 kfree(ahb1); 217 return; 218 } 219 220 /* set up clock properties */ 221 mux->reg = reg; 222 mux->shift = SUN6I_AHB1_MUX_SHIFT; 223 mux->mask = SUN6I_AHB1_MUX_MASK; 224 mux->lock = &clk_lock; 225 ahb1->reg = reg; 226 227 clk = clk_register_composite(NULL, clk_name, parents, i, 228 &mux->hw, &clk_mux_ops, 229 &ahb1->hw, &sun6i_ahb1_clk_ops, 230 NULL, NULL, 0); 231 232 if (!IS_ERR(clk)) { 233 of_clk_add_provider(node, of_clk_src_simple_get, clk); 234 clk_register_clkdev(clk, clk_name, NULL); 235 } 236 } 237 CLK_OF_DECLARE(sun6i_a31_ahb1, "allwinner,sun6i-a31-ahb1-clk", sun6i_ahb1_clk_setup); 238 239 /* Maximum number of parents our clocks have */ 240 #define SUNXI_MAX_PARENTS 5 241 242 /** 243 * sun4i_get_pll1_factors() - calculates n, k, m, p factors for PLL1 244 * PLL1 rate is calculated as follows 245 * rate = (parent_rate * n * (k + 1) >> p) / (m + 1); 246 * parent_rate is always 24Mhz 247 */ 248 249 static void sun4i_get_pll1_factors(u32 *freq, u32 parent_rate, 250 u8 *n, u8 *k, u8 *m, u8 *p) 251 { 252 u8 div; 253 254 /* Normalize value to a 6M multiple */ 255 div = *freq / 6000000; 256 *freq = 6000000 * div; 257 258 /* we were called to round the frequency, we can now return */ 259 if (n == NULL) 260 return; 261 262 /* m is always zero for pll1 */ 263 *m = 0; 264 265 /* k is 1 only on these cases */ 266 if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000) 267 *k = 1; 268 else 269 *k = 0; 270 271 /* p will be 3 for divs under 10 */ 272 if (div < 10) 273 *p = 3; 274 275 /* p will be 2 for divs between 10 - 20 and odd divs under 32 */ 276 else if (div < 20 || (div < 32 && (div & 1))) 277 *p = 2; 278 279 /* p will be 1 for even divs under 32, divs under 40 and odd pairs 280 * of divs between 40-62 */ 281 else if (div < 40 || (div < 64 && (div & 2))) 282 *p = 1; 283 284 /* any other entries have p = 0 */ 285 else 286 *p = 0; 287 288 /* calculate a suitable n based on k and p */ 289 div <<= *p; 290 div /= (*k + 1); 291 *n = div / 4; 292 } 293 294 /** 295 * sun6i_a31_get_pll1_factors() - calculates n, k and m factors for PLL1 296 * PLL1 rate is calculated as follows 297 * rate = parent_rate * (n + 1) * (k + 1) / (m + 1); 298 * parent_rate should always be 24MHz 299 */ 300 static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate, 301 u8 *n, u8 *k, u8 *m, u8 *p) 302 { 303 /* 304 * We can operate only on MHz, this will make our life easier 305 * later. 306 */ 307 u32 freq_mhz = *freq / 1000000; 308 u32 parent_freq_mhz = parent_rate / 1000000; 309 310 /* 311 * Round down the frequency to the closest multiple of either 312 * 6 or 16 313 */ 314 u32 round_freq_6 = round_down(freq_mhz, 6); 315 u32 round_freq_16 = round_down(freq_mhz, 16); 316 317 if (round_freq_6 > round_freq_16) 318 freq_mhz = round_freq_6; 319 else 320 freq_mhz = round_freq_16; 321 322 *freq = freq_mhz * 1000000; 323 324 /* 325 * If the factors pointer are null, we were just called to 326 * round down the frequency. 327 * Exit. 328 */ 329 if (n == NULL) 330 return; 331 332 /* If the frequency is a multiple of 32 MHz, k is always 3 */ 333 if (!(freq_mhz % 32)) 334 *k = 3; 335 /* If the frequency is a multiple of 9 MHz, k is always 2 */ 336 else if (!(freq_mhz % 9)) 337 *k = 2; 338 /* If the frequency is a multiple of 8 MHz, k is always 1 */ 339 else if (!(freq_mhz % 8)) 340 *k = 1; 341 /* Otherwise, we don't use the k factor */ 342 else 343 *k = 0; 344 345 /* 346 * If the frequency is a multiple of 2 but not a multiple of 347 * 3, m is 3. This is the first time we use 6 here, yet we 348 * will use it on several other places. 349 * We use this number because it's the lowest frequency we can 350 * generate (with n = 0, k = 0, m = 3), so every other frequency 351 * somehow relates to this frequency. 352 */ 353 if ((freq_mhz % 6) == 2 || (freq_mhz % 6) == 4) 354 *m = 2; 355 /* 356 * If the frequency is a multiple of 6MHz, but the factor is 357 * odd, m will be 3 358 */ 359 else if ((freq_mhz / 6) & 1) 360 *m = 3; 361 /* Otherwise, we end up with m = 1 */ 362 else 363 *m = 1; 364 365 /* Calculate n thanks to the above factors we already got */ 366 *n = freq_mhz * (*m + 1) / ((*k + 1) * parent_freq_mhz) - 1; 367 368 /* 369 * If n end up being outbound, and that we can still decrease 370 * m, do it. 371 */ 372 if ((*n + 1) > 31 && (*m + 1) > 1) { 373 *n = (*n + 1) / 2 - 1; 374 *m = (*m + 1) / 2 - 1; 375 } 376 } 377 378 /** 379 * sun8i_a23_get_pll1_factors() - calculates n, k, m, p factors for PLL1 380 * PLL1 rate is calculated as follows 381 * rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1); 382 * parent_rate is always 24Mhz 383 */ 384 385 static void sun8i_a23_get_pll1_factors(u32 *freq, u32 parent_rate, 386 u8 *n, u8 *k, u8 *m, u8 *p) 387 { 388 u8 div; 389 390 /* Normalize value to a 6M multiple */ 391 div = *freq / 6000000; 392 *freq = 6000000 * div; 393 394 /* we were called to round the frequency, we can now return */ 395 if (n == NULL) 396 return; 397 398 /* m is always zero for pll1 */ 399 *m = 0; 400 401 /* k is 1 only on these cases */ 402 if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000) 403 *k = 1; 404 else 405 *k = 0; 406 407 /* p will be 2 for divs under 20 and odd divs under 32 */ 408 if (div < 20 || (div < 32 && (div & 1))) 409 *p = 2; 410 411 /* p will be 1 for even divs under 32, divs under 40 and odd pairs 412 * of divs between 40-62 */ 413 else if (div < 40 || (div < 64 && (div & 2))) 414 *p = 1; 415 416 /* any other entries have p = 0 */ 417 else 418 *p = 0; 419 420 /* calculate a suitable n based on k and p */ 421 div <<= *p; 422 div /= (*k + 1); 423 *n = div / 4 - 1; 424 } 425 426 /** 427 * sun4i_get_pll5_factors() - calculates n, k factors for PLL5 428 * PLL5 rate is calculated as follows 429 * rate = parent_rate * n * (k + 1) 430 * parent_rate is always 24Mhz 431 */ 432 433 static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, 434 u8 *n, u8 *k, u8 *m, u8 *p) 435 { 436 u8 div; 437 438 /* Normalize value to a parent_rate multiple (24M) */ 439 div = *freq / parent_rate; 440 *freq = parent_rate * div; 441 442 /* we were called to round the frequency, we can now return */ 443 if (n == NULL) 444 return; 445 446 if (div < 31) 447 *k = 0; 448 else if (div / 2 < 31) 449 *k = 1; 450 else if (div / 3 < 31) 451 *k = 2; 452 else 453 *k = 3; 454 455 *n = DIV_ROUND_UP(div, (*k+1)); 456 } 457 458 /** 459 * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6x2 460 * PLL6x2 rate is calculated as follows 461 * rate = parent_rate * (n + 1) * (k + 1) 462 * parent_rate is always 24Mhz 463 */ 464 465 static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, 466 u8 *n, u8 *k, u8 *m, u8 *p) 467 { 468 u8 div; 469 470 /* Normalize value to a parent_rate multiple (24M) */ 471 div = *freq / parent_rate; 472 *freq = parent_rate * div; 473 474 /* we were called to round the frequency, we can now return */ 475 if (n == NULL) 476 return; 477 478 *k = div / 32; 479 if (*k > 3) 480 *k = 3; 481 482 *n = DIV_ROUND_UP(div, (*k+1)) - 1; 483 } 484 485 /** 486 * sun5i_a13_get_ahb_factors() - calculates m, p factors for AHB 487 * AHB rate is calculated as follows 488 * rate = parent_rate >> p 489 */ 490 491 static void sun5i_a13_get_ahb_factors(u32 *freq, u32 parent_rate, 492 u8 *n, u8 *k, u8 *m, u8 *p) 493 { 494 u32 div; 495 496 /* divide only */ 497 if (parent_rate < *freq) 498 *freq = parent_rate; 499 500 /* 501 * user manual says valid speed is 8k ~ 276M, but tests show it 502 * can work at speeds up to 300M, just after reparenting to pll6 503 */ 504 if (*freq < 8000) 505 *freq = 8000; 506 if (*freq > 300000000) 507 *freq = 300000000; 508 509 div = order_base_2(DIV_ROUND_UP(parent_rate, *freq)); 510 511 /* p = 0 ~ 3 */ 512 if (div > 3) 513 div = 3; 514 515 *freq = parent_rate >> div; 516 517 /* we were called to round the frequency, we can now return */ 518 if (p == NULL) 519 return; 520 521 *p = div; 522 } 523 524 /** 525 * sun4i_get_apb1_factors() - calculates m, p factors for APB1 526 * APB1 rate is calculated as follows 527 * rate = (parent_rate >> p) / (m + 1); 528 */ 529 530 static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate, 531 u8 *n, u8 *k, u8 *m, u8 *p) 532 { 533 u8 calcm, calcp; 534 535 if (parent_rate < *freq) 536 *freq = parent_rate; 537 538 parent_rate = DIV_ROUND_UP(parent_rate, *freq); 539 540 /* Invalid rate! */ 541 if (parent_rate > 32) 542 return; 543 544 if (parent_rate <= 4) 545 calcp = 0; 546 else if (parent_rate <= 8) 547 calcp = 1; 548 else if (parent_rate <= 16) 549 calcp = 2; 550 else 551 calcp = 3; 552 553 calcm = (parent_rate >> calcp) - 1; 554 555 *freq = (parent_rate >> calcp) / (calcm + 1); 556 557 /* we were called to round the frequency, we can now return */ 558 if (n == NULL) 559 return; 560 561 *m = calcm; 562 *p = calcp; 563 } 564 565 566 567 568 /** 569 * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B 570 * CLK_OUT rate is calculated as follows 571 * rate = (parent_rate >> p) / (m + 1); 572 */ 573 574 static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate, 575 u8 *n, u8 *k, u8 *m, u8 *p) 576 { 577 u8 div, calcm, calcp; 578 579 /* These clocks can only divide, so we will never be able to achieve 580 * frequencies higher than the parent frequency */ 581 if (*freq > parent_rate) 582 *freq = parent_rate; 583 584 div = DIV_ROUND_UP(parent_rate, *freq); 585 586 if (div < 32) 587 calcp = 0; 588 else if (div / 2 < 32) 589 calcp = 1; 590 else if (div / 4 < 32) 591 calcp = 2; 592 else 593 calcp = 3; 594 595 calcm = DIV_ROUND_UP(div, 1 << calcp); 596 597 *freq = (parent_rate >> calcp) / calcm; 598 599 /* we were called to round the frequency, we can now return */ 600 if (n == NULL) 601 return; 602 603 *m = calcm - 1; 604 *p = calcp; 605 } 606 607 /** 608 * sunxi_factors_clk_setup() - Setup function for factor clocks 609 */ 610 611 static struct clk_factors_config sun4i_pll1_config = { 612 .nshift = 8, 613 .nwidth = 5, 614 .kshift = 4, 615 .kwidth = 2, 616 .mshift = 0, 617 .mwidth = 2, 618 .pshift = 16, 619 .pwidth = 2, 620 }; 621 622 static struct clk_factors_config sun6i_a31_pll1_config = { 623 .nshift = 8, 624 .nwidth = 5, 625 .kshift = 4, 626 .kwidth = 2, 627 .mshift = 0, 628 .mwidth = 2, 629 .n_start = 1, 630 }; 631 632 static struct clk_factors_config sun8i_a23_pll1_config = { 633 .nshift = 8, 634 .nwidth = 5, 635 .kshift = 4, 636 .kwidth = 2, 637 .mshift = 0, 638 .mwidth = 2, 639 .pshift = 16, 640 .pwidth = 2, 641 .n_start = 1, 642 }; 643 644 static struct clk_factors_config sun4i_pll5_config = { 645 .nshift = 8, 646 .nwidth = 5, 647 .kshift = 4, 648 .kwidth = 2, 649 }; 650 651 static struct clk_factors_config sun6i_a31_pll6_config = { 652 .nshift = 8, 653 .nwidth = 5, 654 .kshift = 4, 655 .kwidth = 2, 656 .n_start = 1, 657 }; 658 659 static struct clk_factors_config sun5i_a13_ahb_config = { 660 .pshift = 4, 661 .pwidth = 2, 662 }; 663 664 static struct clk_factors_config sun4i_apb1_config = { 665 .mshift = 0, 666 .mwidth = 5, 667 .pshift = 16, 668 .pwidth = 2, 669 }; 670 671 /* user manual says "n" but it's really "p" */ 672 static struct clk_factors_config sun7i_a20_out_config = { 673 .mshift = 8, 674 .mwidth = 5, 675 .pshift = 20, 676 .pwidth = 2, 677 }; 678 679 static const struct factors_data sun4i_pll1_data __initconst = { 680 .enable = 31, 681 .table = &sun4i_pll1_config, 682 .getter = sun4i_get_pll1_factors, 683 }; 684 685 static const struct factors_data sun6i_a31_pll1_data __initconst = { 686 .enable = 31, 687 .table = &sun6i_a31_pll1_config, 688 .getter = sun6i_a31_get_pll1_factors, 689 }; 690 691 static const struct factors_data sun8i_a23_pll1_data __initconst = { 692 .enable = 31, 693 .table = &sun8i_a23_pll1_config, 694 .getter = sun8i_a23_get_pll1_factors, 695 }; 696 697 static const struct factors_data sun7i_a20_pll4_data __initconst = { 698 .enable = 31, 699 .table = &sun4i_pll5_config, 700 .getter = sun4i_get_pll5_factors, 701 }; 702 703 static const struct factors_data sun4i_pll5_data __initconst = { 704 .enable = 31, 705 .table = &sun4i_pll5_config, 706 .getter = sun4i_get_pll5_factors, 707 .name = "pll5", 708 }; 709 710 static const struct factors_data sun4i_pll6_data __initconst = { 711 .enable = 31, 712 .table = &sun4i_pll5_config, 713 .getter = sun4i_get_pll5_factors, 714 .name = "pll6", 715 }; 716 717 static const struct factors_data sun6i_a31_pll6_data __initconst = { 718 .enable = 31, 719 .table = &sun6i_a31_pll6_config, 720 .getter = sun6i_a31_get_pll6_factors, 721 .name = "pll6x2", 722 }; 723 724 static const struct factors_data sun5i_a13_ahb_data __initconst = { 725 .mux = 6, 726 .muxmask = BIT(1) | BIT(0), 727 .table = &sun5i_a13_ahb_config, 728 .getter = sun5i_a13_get_ahb_factors, 729 }; 730 731 static const struct factors_data sun4i_apb1_data __initconst = { 732 .mux = 24, 733 .muxmask = BIT(1) | BIT(0), 734 .table = &sun4i_apb1_config, 735 .getter = sun4i_get_apb1_factors, 736 }; 737 738 static const struct factors_data sun7i_a20_out_data __initconst = { 739 .enable = 31, 740 .mux = 24, 741 .muxmask = BIT(1) | BIT(0), 742 .table = &sun7i_a20_out_config, 743 .getter = sun7i_a20_get_out_factors, 744 }; 745 746 static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, 747 const struct factors_data *data) 748 { 749 void __iomem *reg; 750 751 reg = of_iomap(node, 0); 752 if (!reg) { 753 pr_err("Could not get registers for factors-clk: %s\n", 754 node->name); 755 return NULL; 756 } 757 758 return sunxi_factors_register(node, data, &clk_lock, reg); 759 } 760 761 762 763 /** 764 * sunxi_mux_clk_setup() - Setup function for muxes 765 */ 766 767 #define SUNXI_MUX_GATE_WIDTH 2 768 769 struct mux_data { 770 u8 shift; 771 }; 772 773 static const struct mux_data sun4i_cpu_mux_data __initconst = { 774 .shift = 16, 775 }; 776 777 static const struct mux_data sun6i_a31_ahb1_mux_data __initconst = { 778 .shift = 12, 779 }; 780 781 static void __init sunxi_mux_clk_setup(struct device_node *node, 782 struct mux_data *data) 783 { 784 struct clk *clk; 785 const char *clk_name = node->name; 786 const char *parents[SUNXI_MAX_PARENTS]; 787 void __iomem *reg; 788 int i; 789 790 reg = of_iomap(node, 0); 791 792 i = of_clk_parent_fill(node, parents, SUNXI_MAX_PARENTS); 793 of_property_read_string(node, "clock-output-names", &clk_name); 794 795 clk = clk_register_mux(NULL, clk_name, parents, i, 796 CLK_SET_RATE_PARENT, reg, 797 data->shift, SUNXI_MUX_GATE_WIDTH, 798 0, &clk_lock); 799 800 if (clk) { 801 of_clk_add_provider(node, of_clk_src_simple_get, clk); 802 clk_register_clkdev(clk, clk_name, NULL); 803 } 804 } 805 806 807 808 /** 809 * sunxi_divider_clk_setup() - Setup function for simple divider clocks 810 */ 811 812 struct div_data { 813 u8 shift; 814 u8 pow; 815 u8 width; 816 const struct clk_div_table *table; 817 }; 818 819 static const struct div_data sun4i_axi_data __initconst = { 820 .shift = 0, 821 .pow = 0, 822 .width = 2, 823 }; 824 825 static const struct clk_div_table sun8i_a23_axi_table[] __initconst = { 826 { .val = 0, .div = 1 }, 827 { .val = 1, .div = 2 }, 828 { .val = 2, .div = 3 }, 829 { .val = 3, .div = 4 }, 830 { .val = 4, .div = 4 }, 831 { .val = 5, .div = 4 }, 832 { .val = 6, .div = 4 }, 833 { .val = 7, .div = 4 }, 834 { } /* sentinel */ 835 }; 836 837 static const struct div_data sun8i_a23_axi_data __initconst = { 838 .width = 3, 839 .table = sun8i_a23_axi_table, 840 }; 841 842 static const struct div_data sun4i_ahb_data __initconst = { 843 .shift = 4, 844 .pow = 1, 845 .width = 2, 846 }; 847 848 static const struct clk_div_table sun4i_apb0_table[] __initconst = { 849 { .val = 0, .div = 2 }, 850 { .val = 1, .div = 2 }, 851 { .val = 2, .div = 4 }, 852 { .val = 3, .div = 8 }, 853 { } /* sentinel */ 854 }; 855 856 static const struct div_data sun4i_apb0_data __initconst = { 857 .shift = 8, 858 .pow = 1, 859 .width = 2, 860 .table = sun4i_apb0_table, 861 }; 862 863 static void __init sunxi_divider_clk_setup(struct device_node *node, 864 struct div_data *data) 865 { 866 struct clk *clk; 867 const char *clk_name = node->name; 868 const char *clk_parent; 869 void __iomem *reg; 870 871 reg = of_iomap(node, 0); 872 873 clk_parent = of_clk_get_parent_name(node, 0); 874 875 of_property_read_string(node, "clock-output-names", &clk_name); 876 877 clk = clk_register_divider_table(NULL, clk_name, clk_parent, 0, 878 reg, data->shift, data->width, 879 data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0, 880 data->table, &clk_lock); 881 if (clk) { 882 of_clk_add_provider(node, of_clk_src_simple_get, clk); 883 clk_register_clkdev(clk, clk_name, NULL); 884 } 885 } 886 887 888 889 /** 890 * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks 891 */ 892 893 #define SUNXI_GATES_MAX_SIZE 64 894 895 struct gates_data { 896 DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE); 897 }; 898 899 /** 900 * sunxi_divs_clk_setup() helper data 901 */ 902 903 #define SUNXI_DIVS_MAX_QTY 4 904 #define SUNXI_DIVISOR_WIDTH 2 905 906 struct divs_data { 907 const struct factors_data *factors; /* data for the factor clock */ 908 int ndivs; /* number of outputs */ 909 /* 910 * List of outputs. Refer to the diagram for sunxi_divs_clk_setup(): 911 * self or base factor clock refers to the output from the pll 912 * itself. The remaining refer to fixed or configurable divider 913 * outputs. 914 */ 915 struct { 916 u8 self; /* is it the base factor clock? (only one) */ 917 u8 fixed; /* is it a fixed divisor? if not... */ 918 struct clk_div_table *table; /* is it a table based divisor? */ 919 u8 shift; /* otherwise it's a normal divisor with this shift */ 920 u8 pow; /* is it power-of-two based? */ 921 u8 gate; /* is it independently gateable? */ 922 } div[SUNXI_DIVS_MAX_QTY]; 923 }; 924 925 static struct clk_div_table pll6_sata_tbl[] = { 926 { .val = 0, .div = 6, }, 927 { .val = 1, .div = 12, }, 928 { .val = 2, .div = 18, }, 929 { .val = 3, .div = 24, }, 930 { } /* sentinel */ 931 }; 932 933 static const struct divs_data pll5_divs_data __initconst = { 934 .factors = &sun4i_pll5_data, 935 .ndivs = 2, 936 .div = { 937 { .shift = 0, .pow = 0, }, /* M, DDR */ 938 { .shift = 16, .pow = 1, }, /* P, other */ 939 /* No output for the base factor clock */ 940 } 941 }; 942 943 static const struct divs_data pll6_divs_data __initconst = { 944 .factors = &sun4i_pll6_data, 945 .ndivs = 4, 946 .div = { 947 { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */ 948 { .fixed = 2 }, /* P, other */ 949 { .self = 1 }, /* base factor clock, 2x */ 950 { .fixed = 4 }, /* pll6 / 4, used as ahb input */ 951 } 952 }; 953 954 static const struct divs_data sun6i_a31_pll6_divs_data __initconst = { 955 .factors = &sun6i_a31_pll6_data, 956 .ndivs = 2, 957 .div = { 958 { .fixed = 2 }, /* normal output */ 959 { .self = 1 }, /* base factor clock, 2x */ 960 } 961 }; 962 963 /** 964 * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks 965 * 966 * These clocks look something like this 967 * ________________________ 968 * | ___divisor 1---|----> to consumer 969 * parent >--| pll___/___divisor 2---|----> to consumer 970 * | \_______________|____> to consumer 971 * |________________________| 972 */ 973 974 static void __init sunxi_divs_clk_setup(struct device_node *node, 975 struct divs_data *data) 976 { 977 struct clk_onecell_data *clk_data; 978 const char *parent; 979 const char *clk_name; 980 struct clk **clks, *pclk; 981 struct clk_hw *gate_hw, *rate_hw; 982 const struct clk_ops *rate_ops; 983 struct clk_gate *gate = NULL; 984 struct clk_fixed_factor *fix_factor; 985 struct clk_divider *divider; 986 void __iomem *reg; 987 int ndivs = SUNXI_DIVS_MAX_QTY, i = 0; 988 int flags, clkflags; 989 990 /* if number of children known, use it */ 991 if (data->ndivs) 992 ndivs = data->ndivs; 993 994 /* Set up factor clock that we will be dividing */ 995 pclk = sunxi_factors_clk_setup(node, data->factors); 996 parent = __clk_get_name(pclk); 997 998 reg = of_iomap(node, 0); 999 1000 clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); 1001 if (!clk_data) 1002 return; 1003 1004 clks = kcalloc(ndivs, sizeof(*clks), GFP_KERNEL); 1005 if (!clks) 1006 goto free_clkdata; 1007 1008 clk_data->clks = clks; 1009 1010 /* It's not a good idea to have automatic reparenting changing 1011 * our RAM clock! */ 1012 clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT; 1013 1014 for (i = 0; i < ndivs; i++) { 1015 if (of_property_read_string_index(node, "clock-output-names", 1016 i, &clk_name) != 0) 1017 break; 1018 1019 /* If this is the base factor clock, only update clks */ 1020 if (data->div[i].self) { 1021 clk_data->clks[i] = pclk; 1022 continue; 1023 } 1024 1025 gate_hw = NULL; 1026 rate_hw = NULL; 1027 rate_ops = NULL; 1028 1029 /* If this leaf clock can be gated, create a gate */ 1030 if (data->div[i].gate) { 1031 gate = kzalloc(sizeof(*gate), GFP_KERNEL); 1032 if (!gate) 1033 goto free_clks; 1034 1035 gate->reg = reg; 1036 gate->bit_idx = data->div[i].gate; 1037 gate->lock = &clk_lock; 1038 1039 gate_hw = &gate->hw; 1040 } 1041 1042 /* Leaves can be fixed or configurable divisors */ 1043 if (data->div[i].fixed) { 1044 fix_factor = kzalloc(sizeof(*fix_factor), GFP_KERNEL); 1045 if (!fix_factor) 1046 goto free_gate; 1047 1048 fix_factor->mult = 1; 1049 fix_factor->div = data->div[i].fixed; 1050 1051 rate_hw = &fix_factor->hw; 1052 rate_ops = &clk_fixed_factor_ops; 1053 } else { 1054 divider = kzalloc(sizeof(*divider), GFP_KERNEL); 1055 if (!divider) 1056 goto free_gate; 1057 1058 flags = data->div[i].pow ? CLK_DIVIDER_POWER_OF_TWO : 0; 1059 1060 divider->reg = reg; 1061 divider->shift = data->div[i].shift; 1062 divider->width = SUNXI_DIVISOR_WIDTH; 1063 divider->flags = flags; 1064 divider->lock = &clk_lock; 1065 divider->table = data->div[i].table; 1066 1067 rate_hw = ÷r->hw; 1068 rate_ops = &clk_divider_ops; 1069 } 1070 1071 /* Wrap the (potential) gate and the divisor on a composite 1072 * clock to unify them */ 1073 clks[i] = clk_register_composite(NULL, clk_name, &parent, 1, 1074 NULL, NULL, 1075 rate_hw, rate_ops, 1076 gate_hw, &clk_gate_ops, 1077 clkflags); 1078 1079 WARN_ON(IS_ERR(clk_data->clks[i])); 1080 clk_register_clkdev(clks[i], clk_name, NULL); 1081 } 1082 1083 /* Adjust to the real max */ 1084 clk_data->clk_num = i; 1085 1086 of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); 1087 1088 return; 1089 1090 free_gate: 1091 kfree(gate); 1092 free_clks: 1093 kfree(clks); 1094 free_clkdata: 1095 kfree(clk_data); 1096 } 1097 1098 1099 1100 /* Matches for factors clocks */ 1101 static const struct of_device_id clk_factors_match[] __initconst = { 1102 {.compatible = "allwinner,sun4i-a10-pll1-clk", .data = &sun4i_pll1_data,}, 1103 {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, 1104 {.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,}, 1105 {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, 1106 {.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,}, 1107 {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, 1108 {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, 1109 {} 1110 }; 1111 1112 /* Matches for divider clocks */ 1113 static const struct of_device_id clk_div_match[] __initconst = { 1114 {.compatible = "allwinner,sun4i-a10-axi-clk", .data = &sun4i_axi_data,}, 1115 {.compatible = "allwinner,sun8i-a23-axi-clk", .data = &sun8i_a23_axi_data,}, 1116 {.compatible = "allwinner,sun4i-a10-ahb-clk", .data = &sun4i_ahb_data,}, 1117 {.compatible = "allwinner,sun4i-a10-apb0-clk", .data = &sun4i_apb0_data,}, 1118 {} 1119 }; 1120 1121 /* Matches for divided outputs */ 1122 static const struct of_device_id clk_divs_match[] __initconst = { 1123 {.compatible = "allwinner,sun4i-a10-pll5-clk", .data = &pll5_divs_data,}, 1124 {.compatible = "allwinner,sun4i-a10-pll6-clk", .data = &pll6_divs_data,}, 1125 {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_divs_data,}, 1126 {} 1127 }; 1128 1129 /* Matches for mux clocks */ 1130 static const struct of_device_id clk_mux_match[] __initconst = { 1131 {.compatible = "allwinner,sun4i-a10-cpu-clk", .data = &sun4i_cpu_mux_data,}, 1132 {.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,}, 1133 {} 1134 }; 1135 1136 1137 static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match, 1138 void *function) 1139 { 1140 struct device_node *np; 1141 const struct div_data *data; 1142 const struct of_device_id *match; 1143 void (*setup_function)(struct device_node *, const void *) = function; 1144 1145 for_each_matching_node_and_match(np, clk_match, &match) { 1146 data = match->data; 1147 setup_function(np, data); 1148 } 1149 } 1150 1151 static void __init sunxi_init_clocks(const char *clocks[], int nclocks) 1152 { 1153 unsigned int i; 1154 1155 /* Register divided output clocks */ 1156 of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup); 1157 1158 /* Register factor clocks */ 1159 of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup); 1160 1161 /* Register divider clocks */ 1162 of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup); 1163 1164 /* Register mux clocks */ 1165 of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup); 1166 1167 /* Protect the clocks that needs to stay on */ 1168 for (i = 0; i < nclocks; i++) { 1169 struct clk *clk = clk_get(NULL, clocks[i]); 1170 1171 if (!IS_ERR(clk)) 1172 clk_prepare_enable(clk); 1173 } 1174 } 1175 1176 static const char *sun4i_a10_critical_clocks[] __initdata = { 1177 "pll5_ddr", 1178 }; 1179 1180 static void __init sun4i_a10_init_clocks(struct device_node *node) 1181 { 1182 sunxi_init_clocks(sun4i_a10_critical_clocks, 1183 ARRAY_SIZE(sun4i_a10_critical_clocks)); 1184 } 1185 CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks); 1186 1187 static const char *sun5i_critical_clocks[] __initdata = { 1188 "cpu", 1189 "pll5_ddr", 1190 }; 1191 1192 static void __init sun5i_init_clocks(struct device_node *node) 1193 { 1194 sunxi_init_clocks(sun5i_critical_clocks, 1195 ARRAY_SIZE(sun5i_critical_clocks)); 1196 } 1197 CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sun5i_init_clocks); 1198 CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sun5i_init_clocks); 1199 CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sun5i_init_clocks); 1200 1201 static const char *sun6i_critical_clocks[] __initdata = { 1202 "cpu", 1203 }; 1204 1205 static void __init sun6i_init_clocks(struct device_node *node) 1206 { 1207 sunxi_init_clocks(sun6i_critical_clocks, 1208 ARRAY_SIZE(sun6i_critical_clocks)); 1209 } 1210 CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks); 1211 CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks); 1212 CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks); 1213 CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks); 1214 1215 static void __init sun9i_init_clocks(struct device_node *node) 1216 { 1217 sunxi_init_clocks(NULL, 0); 1218 } 1219 CLK_OF_DECLARE(sun9i_a80_clk_init, "allwinner,sun9i-a80", sun9i_init_clocks); 1220