1Module options 2-------------- 3 4The mwave module takes the following options. Note that these options 5are not saved by the BIOS and so do not persist after unload and reload. 6 7 mwave_3780i_irq=5/7/10/11/15 8 If the dsp irq has not been setup and stored in bios by the 9 thinkpad configuration utility then this parameter allows the 10 irq used by the dsp to be configured. 11 12 mwave_3780i_io=0x130/0x350/0x0070/0xDB0 13 If the dsp io range has not been setup and stored in bios by the 14 thinkpad configuration utility then this parameter allows the 15 io range used by the dsp to be configured. 16 17 mwave_uart_irq=3/4 18 If the mwave's uart irq has not been setup and stored in bios by the 19 thinkpad configuration utility then this parameter allows the 20 irq used by the mwave uart to be configured. 21 22 mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8 23 If the uart io range has not been setup and stored in bios by the 24 thinkpad configuration utility then this parameter allows the 25 io range used by the mwave uart to be configured. 26 27Example to enable the 3780i DSP using ttyS1 resources: 28 29 insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8 30 31Accessing the driver 32-------------------- 33 34You must also create a node for the driver: 35 mkdir -p /dev/modems 36 mknod --mode=660 /dev/modems/mwave c 10 219 37 38