1# x86 configuration 2mainmenu "Linux Kernel Configuration for x86" 3 4# Select 32 or 64 bit 5config 64BIT 6 bool "64-bit kernel" if ARCH = "x86" 7 default ARCH = "x86_64" 8 help 9 Say yes to build a 64-bit kernel - formerly known as x86_64 10 Say no to build a 32-bit kernel - formerly known as i386 11 12config X86_32 13 def_bool !64BIT 14 15config X86_64 16 def_bool 64BIT 17 18### Arch settings 19config X86 20 def_bool y 21 select HAVE_AOUT if X86_32 22 select HAVE_READQ 23 select HAVE_WRITEQ 24 select HAVE_UNSTABLE_SCHED_CLOCK 25 select HAVE_IDE 26 select HAVE_OPROFILE 27 select HAVE_IOREMAP_PROT 28 select HAVE_KPROBES 29 select ARCH_WANT_OPTIONAL_GPIOLIB 30 select ARCH_WANT_FRAME_POINTERS 31 select HAVE_KRETPROBES 32 select HAVE_FTRACE_MCOUNT_RECORD 33 select HAVE_DYNAMIC_FTRACE 34 select HAVE_FUNCTION_TRACER 35 select HAVE_FUNCTION_GRAPH_TRACER 36 select HAVE_FUNCTION_TRACE_MCOUNT_TEST 37 select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) 38 select HAVE_ARCH_KGDB if !X86_VOYAGER 39 select HAVE_ARCH_TRACEHOOK 40 select HAVE_GENERIC_DMA_COHERENT if X86_32 41 select HAVE_EFFICIENT_UNALIGNED_ACCESS 42 select USER_STACKTRACE_SUPPORT 43 44config ARCH_DEFCONFIG 45 string 46 default "arch/x86/configs/i386_defconfig" if X86_32 47 default "arch/x86/configs/x86_64_defconfig" if X86_64 48 49config GENERIC_TIME 50 def_bool y 51 52config GENERIC_CMOS_UPDATE 53 def_bool y 54 55config CLOCKSOURCE_WATCHDOG 56 def_bool y 57 58config GENERIC_CLOCKEVENTS 59 def_bool y 60 61config GENERIC_CLOCKEVENTS_BROADCAST 62 def_bool y 63 depends on X86_64 || (X86_32 && X86_LOCAL_APIC) 64 65config LOCKDEP_SUPPORT 66 def_bool y 67 68config STACKTRACE_SUPPORT 69 def_bool y 70 71config HAVE_LATENCYTOP_SUPPORT 72 def_bool y 73 74config FAST_CMPXCHG_LOCAL 75 bool 76 default y 77 78config MMU 79 def_bool y 80 81config ZONE_DMA 82 def_bool y 83 84config SBUS 85 bool 86 87config GENERIC_ISA_DMA 88 def_bool y 89 90config GENERIC_IOMAP 91 def_bool y 92 93config GENERIC_BUG 94 def_bool y 95 depends on BUG 96 select GENERIC_BUG_RELATIVE_POINTERS if X86_64 97 98config GENERIC_BUG_RELATIVE_POINTERS 99 bool 100 101config GENERIC_HWEIGHT 102 def_bool y 103 104config GENERIC_GPIO 105 bool 106 107config ARCH_MAY_HAVE_PC_FDC 108 def_bool y 109 110config RWSEM_GENERIC_SPINLOCK 111 def_bool !X86_XADD 112 113config RWSEM_XCHGADD_ALGORITHM 114 def_bool X86_XADD 115 116config ARCH_HAS_CPU_IDLE_WAIT 117 def_bool y 118 119config GENERIC_CALIBRATE_DELAY 120 def_bool y 121 122config GENERIC_TIME_VSYSCALL 123 bool 124 default X86_64 125 126config ARCH_HAS_CPU_RELAX 127 def_bool y 128 129config ARCH_HAS_DEFAULT_IDLE 130 def_bool y 131 132config ARCH_HAS_CACHE_LINE_SIZE 133 def_bool y 134 135config HAVE_SETUP_PER_CPU_AREA 136 def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER) 137 138config HAVE_CPUMASK_OF_CPU_MAP 139 def_bool X86_64_SMP 140 141config ARCH_HIBERNATION_POSSIBLE 142 def_bool y 143 depends on !SMP || !X86_VOYAGER 144 145config ARCH_SUSPEND_POSSIBLE 146 def_bool y 147 depends on !X86_VOYAGER 148 149config ZONE_DMA32 150 bool 151 default X86_64 152 153config ARCH_POPULATES_NODE_MAP 154 def_bool y 155 156config AUDIT_ARCH 157 bool 158 default X86_64 159 160config ARCH_SUPPORTS_OPTIMIZED_INLINING 161 def_bool y 162 163# Use the generic interrupt handling code in kernel/irq/: 164config GENERIC_HARDIRQS 165 bool 166 default y 167 168config GENERIC_IRQ_PROBE 169 bool 170 default y 171 172config GENERIC_PENDING_IRQ 173 bool 174 depends on GENERIC_HARDIRQS && SMP 175 default y 176 177config X86_SMP 178 bool 179 depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64) 180 default y 181 182config USE_GENERIC_SMP_HELPERS 183 def_bool y 184 depends on SMP 185 186config X86_32_SMP 187 def_bool y 188 depends on X86_32 && SMP 189 190config X86_64_SMP 191 def_bool y 192 depends on X86_64 && SMP 193 194config X86_HT 195 bool 196 depends on SMP 197 depends on (X86_32 && !X86_VOYAGER) || X86_64 198 default y 199 200config X86_BIOS_REBOOT 201 bool 202 depends on !X86_VOYAGER 203 default y 204 205config X86_TRAMPOLINE 206 bool 207 depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP) 208 default y 209 210config KTIME_SCALAR 211 def_bool X86_32 212source "init/Kconfig" 213source "kernel/Kconfig.freezer" 214 215menu "Processor type and features" 216 217source "kernel/time/Kconfig" 218 219config SMP 220 bool "Symmetric multi-processing support" 221 ---help--- 222 This enables support for systems with more than one CPU. If you have 223 a system with only one CPU, like most personal computers, say N. If 224 you have a system with more than one CPU, say Y. 225 226 If you say N here, the kernel will run on single and multiprocessor 227 machines, but will use only one CPU of a multiprocessor machine. If 228 you say Y here, the kernel will run on many, but not all, 229 singleprocessor machines. On a singleprocessor machine, the kernel 230 will run faster if you say N here. 231 232 Note that if you say Y here and choose architecture "586" or 233 "Pentium" under "Processor family", the kernel will not work on 486 234 architectures. Similarly, multiprocessor kernels for the "PPro" 235 architecture may not work on all Pentium based boards. 236 237 People using multiprocessor machines who say Y here should also say 238 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power 239 Management" code will be disabled if you say Y here. 240 241 See also <file:Documentation/i386/IO-APIC.txt>, 242 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at 243 <http://www.tldp.org/docs.html#howto>. 244 245 If you don't know what to do here, say N. 246 247config X86_HAS_BOOT_CPU_ID 248 def_bool y 249 depends on X86_VOYAGER 250 251config SPARSE_IRQ 252 bool "Support sparse irq numbering" 253 depends on PCI_MSI || HT_IRQ 254 help 255 This enables support for sparse irqs. This is useful for distro 256 kernels that want to define a high CONFIG_NR_CPUS value but still 257 want to have low kernel memory footprint on smaller machines. 258 259 ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread 260 out the irq_desc[] array in a more NUMA-friendly way. ) 261 262 If you don't know what to do here, say N. 263 264config NUMA_MIGRATE_IRQ_DESC 265 bool "Move irq desc when changing irq smp_affinity" 266 depends on SPARSE_IRQ && NUMA 267 default n 268 help 269 This enables moving irq_desc to cpu/node that irq will use handled. 270 271 If you don't know what to do here, say N. 272 273config X86_FIND_SMP_CONFIG 274 def_bool y 275 depends on X86_MPPARSE || X86_VOYAGER 276 277config X86_MPPARSE 278 bool "Enable MPS table" if ACPI 279 default y 280 depends on X86_LOCAL_APIC 281 help 282 For old smp systems that do not have proper acpi support. Newer systems 283 (esp with 64bit cpus) with acpi support, MADT and DSDT will override it 284 285choice 286 prompt "Subarchitecture Type" 287 default X86_PC 288 289config X86_PC 290 bool "PC-compatible" 291 help 292 Choose this option if your computer is a standard PC or compatible. 293 294config X86_ELAN 295 bool "AMD Elan" 296 depends on X86_32 297 help 298 Select this for an AMD Elan processor. 299 300 Do not use this option for K6/Athlon/Opteron processors! 301 302 If unsure, choose "PC-compatible" instead. 303 304config X86_VOYAGER 305 bool "Voyager (NCR)" 306 depends on X86_32 && (SMP || BROKEN) && !PCI 307 help 308 Voyager is an MCA-based 32-way capable SMP architecture proprietary 309 to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based. 310 311 *** WARNING *** 312 313 If you do not specifically know you have a Voyager based machine, 314 say N here, otherwise the kernel you build will not be bootable. 315 316config X86_GENERICARCH 317 bool "Generic architecture" 318 depends on X86_32 319 help 320 This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default 321 subarchitectures. It is intended for a generic binary kernel. 322 if you select them all, kernel will probe it one by one. and will 323 fallback to default. 324 325if X86_GENERICARCH 326 327config X86_NUMAQ 328 bool "NUMAQ (IBM/Sequent)" 329 depends on SMP && X86_32 && PCI && X86_MPPARSE 330 select NUMA 331 help 332 This option is used for getting Linux to run on a NUMAQ (IBM/Sequent) 333 NUMA multiquad box. This changes the way that processors are 334 bootstrapped, and uses Clustered Logical APIC addressing mode instead 335 of Flat Logical. You will need a new lynxer.elf file to flash your 336 firmware with - send email to <Martin.Bligh@us.ibm.com>. 337 338config X86_SUMMIT 339 bool "Summit/EXA (IBM x440)" 340 depends on X86_32 && SMP 341 help 342 This option is needed for IBM systems that use the Summit/EXA chipset. 343 In particular, it is needed for the x440. 344 345config X86_ES7000 346 bool "Support for Unisys ES7000 IA32 series" 347 depends on X86_32 && SMP 348 help 349 Support for Unisys ES7000 systems. Say 'Y' here if this kernel is 350 supposed to run on an IA32-based Unisys ES7000 system. 351 352config X86_BIGSMP 353 bool "Support for big SMP systems with more than 8 CPUs" 354 depends on X86_32 && SMP 355 help 356 This option is needed for the systems that have more than 8 CPUs 357 and if the system is not of any sub-arch type above. 358 359endif 360 361config X86_VSMP 362 bool "Support for ScaleMP vSMP" 363 select PARAVIRT 364 depends on X86_64 && PCI 365 help 366 Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is 367 supposed to run on these EM64T-based machines. Only choose this option 368 if you have one of these machines. 369 370endchoice 371 372config X86_VISWS 373 bool "SGI 320/540 (Visual Workstation)" 374 depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT 375 help 376 The SGI Visual Workstation series is an IA32-based workstation 377 based on SGI systems chips with some legacy PC hardware attached. 378 379 Say Y here to create a kernel to run on the SGI 320 or 540. 380 381 A kernel compiled for the Visual Workstation will run on general 382 PCs as well. See <file:Documentation/sgi-visws.txt> for details. 383 384config X86_RDC321X 385 bool "RDC R-321x SoC" 386 depends on X86_32 387 select M486 388 select X86_REBOOTFIXUPS 389 help 390 This option is needed for RDC R-321x system-on-chip, also known 391 as R-8610-(G). 392 If you don't have one of these chips, you should say N here. 393 394config SCHED_OMIT_FRAME_POINTER 395 def_bool y 396 prompt "Single-depth WCHAN output" 397 depends on X86 398 help 399 Calculate simpler /proc/<PID>/wchan values. If this option 400 is disabled then wchan values will recurse back to the 401 caller function. This provides more accurate wchan values, 402 at the expense of slightly more scheduling overhead. 403 404 If in doubt, say "Y". 405 406menuconfig PARAVIRT_GUEST 407 bool "Paravirtualized guest support" 408 help 409 Say Y here to get to see options related to running Linux under 410 various hypervisors. This option alone does not add any kernel code. 411 412 If you say N, all options in this submenu will be skipped and disabled. 413 414if PARAVIRT_GUEST 415 416source "arch/x86/xen/Kconfig" 417 418config VMI 419 bool "VMI Guest support" 420 select PARAVIRT 421 depends on X86_32 422 depends on !X86_VOYAGER 423 help 424 VMI provides a paravirtualized interface to the VMware ESX server 425 (it could be used by other hypervisors in theory too, but is not 426 at the moment), by linking the kernel to a GPL-ed ROM module 427 provided by the hypervisor. 428 429config KVM_CLOCK 430 bool "KVM paravirtualized clock" 431 select PARAVIRT 432 select PARAVIRT_CLOCK 433 depends on !X86_VOYAGER 434 help 435 Turning on this option will allow you to run a paravirtualized clock 436 when running over the KVM hypervisor. Instead of relying on a PIT 437 (or probably other) emulation by the underlying device model, the host 438 provides the guest with timing infrastructure such as time of day, and 439 system time 440 441config KVM_GUEST 442 bool "KVM Guest support" 443 select PARAVIRT 444 depends on !X86_VOYAGER 445 help 446 This option enables various optimizations for running under the KVM 447 hypervisor. 448 449source "arch/x86/lguest/Kconfig" 450 451config PARAVIRT 452 bool "Enable paravirtualization code" 453 depends on !X86_VOYAGER 454 help 455 This changes the kernel so it can modify itself when it is run 456 under a hypervisor, potentially improving performance significantly 457 over full virtualization. However, when run without a hypervisor 458 the kernel is theoretically slower and slightly larger. 459 460config PARAVIRT_CLOCK 461 bool 462 default n 463 464endif 465 466config PARAVIRT_DEBUG 467 bool "paravirt-ops debugging" 468 depends on PARAVIRT && DEBUG_KERNEL 469 help 470 Enable to debug paravirt_ops internals. Specifically, BUG if 471 a paravirt_op is missing when it is called. 472 473config MEMTEST 474 bool "Memtest" 475 help 476 This option adds a kernel parameter 'memtest', which allows memtest 477 to be set. 478 memtest=0, mean disabled; -- default 479 memtest=1, mean do 1 test pattern; 480 ... 481 memtest=4, mean do 4 test patterns. 482 If you are unsure how to answer this question, answer N. 483 484config X86_SUMMIT_NUMA 485 def_bool y 486 depends on X86_32 && NUMA && X86_GENERICARCH 487 488config X86_CYCLONE_TIMER 489 def_bool y 490 depends on X86_GENERICARCH 491 492source "arch/x86/Kconfig.cpu" 493 494config HPET_TIMER 495 def_bool X86_64 496 prompt "HPET Timer Support" if X86_32 497 help 498 Use the IA-PC HPET (High Precision Event Timer) to manage 499 time in preference to the PIT and RTC, if a HPET is 500 present. 501 HPET is the next generation timer replacing legacy 8254s. 502 The HPET provides a stable time base on SMP 503 systems, unlike the TSC, but it is more expensive to access, 504 as it is off-chip. You can find the HPET spec at 505 <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>. 506 507 You can safely choose Y here. However, HPET will only be 508 activated if the platform and the BIOS support this feature. 509 Otherwise the 8254 will be used for timing services. 510 511 Choose N to continue using the legacy 8254 timer. 512 513config HPET_EMULATE_RTC 514 def_bool y 515 depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y) 516 517# Mark as embedded because too many people got it wrong. 518# The code disables itself when not needed. 519config DMI 520 default y 521 bool "Enable DMI scanning" if EMBEDDED 522 help 523 Enabled scanning of DMI to identify machine quirks. Say Y 524 here unless you have verified that your setup is not 525 affected by entries in the DMI blacklist. Required by PNP 526 BIOS code. 527 528config GART_IOMMU 529 bool "GART IOMMU support" if EMBEDDED 530 default y 531 select SWIOTLB 532 select AGP 533 depends on X86_64 && PCI 534 help 535 Support for full DMA access of devices with 32bit memory access only 536 on systems with more than 3GB. This is usually needed for USB, 537 sound, many IDE/SATA chipsets and some other devices. 538 Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART 539 based hardware IOMMU and a software bounce buffer based IOMMU used 540 on Intel systems and as fallback. 541 The code is only active when needed (enough memory and limited 542 device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified 543 too. 544 545config CALGARY_IOMMU 546 bool "IBM Calgary IOMMU support" 547 select SWIOTLB 548 depends on X86_64 && PCI && EXPERIMENTAL 549 help 550 Support for hardware IOMMUs in IBM's xSeries x366 and x460 551 systems. Needed to run systems with more than 3GB of memory 552 properly with 32-bit PCI devices that do not support DAC 553 (Double Address Cycle). Calgary also supports bus level 554 isolation, where all DMAs pass through the IOMMU. This 555 prevents them from going anywhere except their intended 556 destination. This catches hard-to-find kernel bugs and 557 mis-behaving drivers and devices that do not use the DMA-API 558 properly to set up their DMA buffers. The IOMMU can be 559 turned off at boot time with the iommu=off parameter. 560 Normally the kernel will make the right choice by itself. 561 If unsure, say Y. 562 563config CALGARY_IOMMU_ENABLED_BY_DEFAULT 564 def_bool y 565 prompt "Should Calgary be enabled by default?" 566 depends on CALGARY_IOMMU 567 help 568 Should Calgary be enabled by default? if you choose 'y', Calgary 569 will be used (if it exists). If you choose 'n', Calgary will not be 570 used even if it exists. If you choose 'n' and would like to use 571 Calgary anyway, pass 'iommu=calgary' on the kernel command line. 572 If unsure, say Y. 573 574config AMD_IOMMU 575 bool "AMD IOMMU support" 576 select SWIOTLB 577 select PCI_MSI 578 depends on X86_64 && PCI && ACPI 579 help 580 With this option you can enable support for AMD IOMMU hardware in 581 your system. An IOMMU is a hardware component which provides 582 remapping of DMA memory accesses from devices. With an AMD IOMMU you 583 can isolate the the DMA memory of different devices and protect the 584 system from misbehaving device drivers or hardware. 585 586 You can find out if your system has an AMD IOMMU if you look into 587 your BIOS for an option to enable it or if you have an IVRS ACPI 588 table. 589 590config AMD_IOMMU_STATS 591 bool "Export AMD IOMMU statistics to debugfs" 592 depends on AMD_IOMMU 593 select DEBUG_FS 594 help 595 This option enables code in the AMD IOMMU driver to collect various 596 statistics about whats happening in the driver and exports that 597 information to userspace via debugfs. 598 If unsure, say N. 599 600# need this always selected by IOMMU for the VIA workaround 601config SWIOTLB 602 def_bool y if X86_64 603 help 604 Support for software bounce buffers used on x86-64 systems 605 which don't have a hardware IOMMU (e.g. the current generation 606 of Intel's x86-64 CPUs). Using this PCI devices which can only 607 access 32-bits of memory can be used on systems with more than 608 3 GB of memory. If unsure, say Y. 609 610config IOMMU_HELPER 611 def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU) 612 613config IOMMU_API 614 def_bool (AMD_IOMMU || DMAR) 615 616config MAXSMP 617 bool "Configure Maximum number of SMP Processors and NUMA Nodes" 618 depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL 619 select CPUMASK_OFFSTACK 620 default n 621 help 622 Configure maximum number of CPUS and NUMA Nodes for this architecture. 623 If unsure, say N. 624 625config NR_CPUS 626 int "Maximum number of CPUs" if SMP && !MAXSMP 627 range 2 512 if SMP && !MAXSMP 628 default "1" if !SMP 629 default "4096" if MAXSMP 630 default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000) 631 default "8" if SMP 632 help 633 This allows you to specify the maximum number of CPUs which this 634 kernel will support. The maximum supported value is 512 and the 635 minimum value which makes sense is 2. 636 637 This is purely to save memory - each supported CPU adds 638 approximately eight kilobytes to the kernel image. 639 640config SCHED_SMT 641 bool "SMT (Hyperthreading) scheduler support" 642 depends on X86_HT 643 help 644 SMT scheduler support improves the CPU scheduler's decision making 645 when dealing with Intel Pentium 4 chips with HyperThreading at a 646 cost of slightly increased overhead in some places. If unsure say 647 N here. 648 649config SCHED_MC 650 def_bool y 651 prompt "Multi-core scheduler support" 652 depends on X86_HT 653 help 654 Multi-core scheduler support improves the CPU scheduler's decision 655 making when dealing with multi-core CPU chips at a cost of slightly 656 increased overhead in some places. If unsure say N here. 657 658source "kernel/Kconfig.preempt" 659 660config X86_UP_APIC 661 bool "Local APIC support on uniprocessors" 662 depends on X86_32 && !SMP && !(X86_VOYAGER || X86_GENERICARCH) 663 help 664 A local APIC (Advanced Programmable Interrupt Controller) is an 665 integrated interrupt controller in the CPU. If you have a single-CPU 666 system which has a processor with a local APIC, you can say Y here to 667 enable and use it. If you say Y here even though your machine doesn't 668 have a local APIC, then the kernel will still run with no slowdown at 669 all. The local APIC supports CPU-generated self-interrupts (timer, 670 performance counters), and the NMI watchdog which detects hard 671 lockups. 672 673config X86_UP_IOAPIC 674 bool "IO-APIC support on uniprocessors" 675 depends on X86_UP_APIC 676 help 677 An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an 678 SMP-capable replacement for PC-style interrupt controllers. Most 679 SMP systems and many recent uniprocessor systems have one. 680 681 If you have a single-CPU system with an IO-APIC, you can say Y here 682 to use it. If you say Y here even though your machine doesn't have 683 an IO-APIC, then the kernel will still run with no slowdown at all. 684 685config X86_LOCAL_APIC 686 def_bool y 687 depends on X86_64 || (X86_32 && (X86_UP_APIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH)) 688 689config X86_IO_APIC 690 def_bool y 691 depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH)) 692 693config X86_VISWS_APIC 694 def_bool y 695 depends on X86_32 && X86_VISWS 696 697config X86_REROUTE_FOR_BROKEN_BOOT_IRQS 698 bool "Reroute for broken boot IRQs" 699 default n 700 depends on X86_IO_APIC 701 help 702 This option enables a workaround that fixes a source of 703 spurious interrupts. This is recommended when threaded 704 interrupt handling is used on systems where the generation of 705 superfluous "boot interrupts" cannot be disabled. 706 707 Some chipsets generate a legacy INTx "boot IRQ" when the IRQ 708 entry in the chipset's IO-APIC is masked (as, e.g. the RT 709 kernel does during interrupt handling). On chipsets where this 710 boot IRQ generation cannot be disabled, this workaround keeps 711 the original IRQ line masked so that only the equivalent "boot 712 IRQ" is delivered to the CPUs. The workaround also tells the 713 kernel to set up the IRQ handler on the boot IRQ line. In this 714 way only one interrupt is delivered to the kernel. Otherwise 715 the spurious second interrupt may cause the kernel to bring 716 down (vital) interrupt lines. 717 718 Only affects "broken" chipsets. Interrupt sharing may be 719 increased on these systems. 720 721config X86_MCE 722 bool "Machine Check Exception" 723 depends on !X86_VOYAGER 724 ---help--- 725 Machine Check Exception support allows the processor to notify the 726 kernel if it detects a problem (e.g. overheating, component failure). 727 The action the kernel takes depends on the severity of the problem, 728 ranging from a warning message on the console, to halting the machine. 729 Your processor must be a Pentium or newer to support this - check the 730 flags in /proc/cpuinfo for mce. Note that some older Pentium systems 731 have a design flaw which leads to false MCE events - hence MCE is 732 disabled on all P5 processors, unless explicitly enabled with "mce" 733 as a boot argument. Similarly, if MCE is built in and creates a 734 problem on some new non-standard machine, you can boot with "nomce" 735 to disable it. MCE support simply ignores non-MCE processors like 736 the 386 and 486, so nearly everyone can say Y here. 737 738config X86_MCE_INTEL 739 def_bool y 740 prompt "Intel MCE features" 741 depends on X86_64 && X86_MCE && X86_LOCAL_APIC 742 help 743 Additional support for intel specific MCE features such as 744 the thermal monitor. 745 746config X86_MCE_AMD 747 def_bool y 748 prompt "AMD MCE features" 749 depends on X86_64 && X86_MCE && X86_LOCAL_APIC 750 help 751 Additional support for AMD specific MCE features such as 752 the DRAM Error Threshold. 753 754config X86_MCE_NONFATAL 755 tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4" 756 depends on X86_32 && X86_MCE 757 help 758 Enabling this feature starts a timer that triggers every 5 seconds which 759 will look at the machine check registers to see if anything happened. 760 Non-fatal problems automatically get corrected (but still logged). 761 Disable this if you don't want to see these messages. 762 Seeing the messages this option prints out may be indicative of dying 763 or out-of-spec (ie, overclocked) hardware. 764 This option only does something on certain CPUs. 765 (AMD Athlon/Duron and Intel Pentium 4) 766 767config X86_MCE_P4THERMAL 768 bool "check for P4 thermal throttling interrupt." 769 depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) 770 help 771 Enabling this feature will cause a message to be printed when the P4 772 enters thermal throttling. 773 774config VM86 775 bool "Enable VM86 support" if EMBEDDED 776 default y 777 depends on X86_32 778 help 779 This option is required by programs like DOSEMU to run 16-bit legacy 780 code on X86 processors. It also may be needed by software like 781 XFree86 to initialize some video cards via BIOS. Disabling this 782 option saves about 6k. 783 784config TOSHIBA 785 tristate "Toshiba Laptop support" 786 depends on X86_32 787 ---help--- 788 This adds a driver to safely access the System Management Mode of 789 the CPU on Toshiba portables with a genuine Toshiba BIOS. It does 790 not work on models with a Phoenix BIOS. The System Management Mode 791 is used to set the BIOS and power saving options on Toshiba portables. 792 793 For information on utilities to make use of this driver see the 794 Toshiba Linux utilities web site at: 795 <http://www.buzzard.org.uk/toshiba/>. 796 797 Say Y if you intend to run this kernel on a Toshiba portable. 798 Say N otherwise. 799 800config I8K 801 tristate "Dell laptop support" 802 ---help--- 803 This adds a driver to safely access the System Management Mode 804 of the CPU on the Dell Inspiron 8000. The System Management Mode 805 is used to read cpu temperature and cooling fan status and to 806 control the fans on the I8K portables. 807 808 This driver has been tested only on the Inspiron 8000 but it may 809 also work with other Dell laptops. You can force loading on other 810 models by passing the parameter `force=1' to the module. Use at 811 your own risk. 812 813 For information on utilities to make use of this driver see the 814 I8K Linux utilities web site at: 815 <http://people.debian.org/~dz/i8k/> 816 817 Say Y if you intend to run this kernel on a Dell Inspiron 8000. 818 Say N otherwise. 819 820config X86_REBOOTFIXUPS 821 bool "Enable X86 board specific fixups for reboot" 822 depends on X86_32 823 ---help--- 824 This enables chipset and/or board specific fixups to be done 825 in order to get reboot to work correctly. This is only needed on 826 some combinations of hardware and BIOS. The symptom, for which 827 this config is intended, is when reboot ends with a stalled/hung 828 system. 829 830 Currently, the only fixup is for the Geode machines using 831 CS5530A and CS5536 chipsets and the RDC R-321x SoC. 832 833 Say Y if you want to enable the fixup. Currently, it's safe to 834 enable this option even if you don't need it. 835 Say N otherwise. 836 837config MICROCODE 838 tristate "/dev/cpu/microcode - microcode support" 839 select FW_LOADER 840 ---help--- 841 If you say Y here, you will be able to update the microcode on 842 certain Intel and AMD processors. The Intel support is for the 843 IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, 844 Pentium 4, Xeon etc. The AMD support is for family 0x10 and 845 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra. 846 You will obviously need the actual microcode binary data itself 847 which is not shipped with the Linux kernel. 848 849 This option selects the general module only, you need to select 850 at least one vendor specific module as well. 851 852 To compile this driver as a module, choose M here: the 853 module will be called microcode. 854 855config MICROCODE_INTEL 856 bool "Intel microcode patch loading support" 857 depends on MICROCODE 858 default MICROCODE 859 select FW_LOADER 860 --help--- 861 This options enables microcode patch loading support for Intel 862 processors. 863 864 For latest news and information on obtaining all the required 865 Intel ingredients for this driver, check: 866 <http://www.urbanmyth.org/microcode/>. 867 868config MICROCODE_AMD 869 bool "AMD microcode patch loading support" 870 depends on MICROCODE 871 select FW_LOADER 872 --help--- 873 If you select this option, microcode patch loading support for AMD 874 processors will be enabled. 875 876 config MICROCODE_OLD_INTERFACE 877 def_bool y 878 depends on MICROCODE 879 880config X86_MSR 881 tristate "/dev/cpu/*/msr - Model-specific register support" 882 help 883 This device gives privileged processes access to the x86 884 Model-Specific Registers (MSRs). It is a character device with 885 major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr. 886 MSR accesses are directed to a specific CPU on multi-processor 887 systems. 888 889config X86_CPUID 890 tristate "/dev/cpu/*/cpuid - CPU information support" 891 help 892 This device gives processes access to the x86 CPUID instruction to 893 be executed on a specific processor. It is a character device 894 with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to 895 /dev/cpu/31/cpuid. 896 897choice 898 prompt "High Memory Support" 899 default HIGHMEM4G if !X86_NUMAQ 900 default HIGHMEM64G if X86_NUMAQ 901 depends on X86_32 902 903config NOHIGHMEM 904 bool "off" 905 depends on !X86_NUMAQ 906 ---help--- 907 Linux can use up to 64 Gigabytes of physical memory on x86 systems. 908 However, the address space of 32-bit x86 processors is only 4 909 Gigabytes large. That means that, if you have a large amount of 910 physical memory, not all of it can be "permanently mapped" by the 911 kernel. The physical memory that's not permanently mapped is called 912 "high memory". 913 914 If you are compiling a kernel which will never run on a machine with 915 more than 1 Gigabyte total physical RAM, answer "off" here (default 916 choice and suitable for most users). This will result in a "3GB/1GB" 917 split: 3GB are mapped so that each process sees a 3GB virtual memory 918 space and the remaining part of the 4GB virtual memory space is used 919 by the kernel to permanently map as much physical memory as 920 possible. 921 922 If the machine has between 1 and 4 Gigabytes physical RAM, then 923 answer "4GB" here. 924 925 If more than 4 Gigabytes is used then answer "64GB" here. This 926 selection turns Intel PAE (Physical Address Extension) mode on. 927 PAE implements 3-level paging on IA32 processors. PAE is fully 928 supported by Linux, PAE mode is implemented on all recent Intel 929 processors (Pentium Pro and better). NOTE: If you say "64GB" here, 930 then the kernel will not boot on CPUs that don't support PAE! 931 932 The actual amount of total physical memory will either be 933 auto detected or can be forced by using a kernel command line option 934 such as "mem=256M". (Try "man bootparam" or see the documentation of 935 your boot loader (lilo or loadlin) about how to pass options to the 936 kernel at boot time.) 937 938 If unsure, say "off". 939 940config HIGHMEM4G 941 bool "4GB" 942 depends on !X86_NUMAQ 943 help 944 Select this if you have a 32-bit processor and between 1 and 4 945 gigabytes of physical RAM. 946 947config HIGHMEM64G 948 bool "64GB" 949 depends on !M386 && !M486 950 select X86_PAE 951 help 952 Select this if you have a 32-bit processor and more than 4 953 gigabytes of physical RAM. 954 955endchoice 956 957choice 958 depends on EXPERIMENTAL 959 prompt "Memory split" if EMBEDDED 960 default VMSPLIT_3G 961 depends on X86_32 962 help 963 Select the desired split between kernel and user memory. 964 965 If the address range available to the kernel is less than the 966 physical memory installed, the remaining memory will be available 967 as "high memory". Accessing high memory is a little more costly 968 than low memory, as it needs to be mapped into the kernel first. 969 Note that increasing the kernel address space limits the range 970 available to user programs, making the address space there 971 tighter. Selecting anything other than the default 3G/1G split 972 will also likely make your kernel incompatible with binary-only 973 kernel modules. 974 975 If you are not absolutely sure what you are doing, leave this 976 option alone! 977 978 config VMSPLIT_3G 979 bool "3G/1G user/kernel split" 980 config VMSPLIT_3G_OPT 981 depends on !X86_PAE 982 bool "3G/1G user/kernel split (for full 1G low memory)" 983 config VMSPLIT_2G 984 bool "2G/2G user/kernel split" 985 config VMSPLIT_2G_OPT 986 depends on !X86_PAE 987 bool "2G/2G user/kernel split (for full 2G low memory)" 988 config VMSPLIT_1G 989 bool "1G/3G user/kernel split" 990endchoice 991 992config PAGE_OFFSET 993 hex 994 default 0xB0000000 if VMSPLIT_3G_OPT 995 default 0x80000000 if VMSPLIT_2G 996 default 0x78000000 if VMSPLIT_2G_OPT 997 default 0x40000000 if VMSPLIT_1G 998 default 0xC0000000 999 depends on X86_32 1000 1001config HIGHMEM 1002 def_bool y 1003 depends on X86_32 && (HIGHMEM64G || HIGHMEM4G) 1004 1005config X86_PAE 1006 bool "PAE (Physical Address Extension) Support" 1007 depends on X86_32 && !HIGHMEM4G 1008 help 1009 PAE is required for NX support, and furthermore enables 1010 larger swapspace support for non-overcommit purposes. It 1011 has the cost of more pagetable lookup overhead, and also 1012 consumes more pagetable space per process. 1013 1014config ARCH_PHYS_ADDR_T_64BIT 1015 def_bool X86_64 || X86_PAE 1016 1017config DIRECT_GBPAGES 1018 bool "Enable 1GB pages for kernel pagetables" if EMBEDDED 1019 default y 1020 depends on X86_64 1021 help 1022 Allow the kernel linear mapping to use 1GB pages on CPUs that 1023 support it. This can improve the kernel's performance a tiny bit by 1024 reducing TLB pressure. If in doubt, say "Y". 1025 1026# Common NUMA Features 1027config NUMA 1028 bool "Numa Memory Allocation and Scheduler Support" 1029 depends on SMP 1030 depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL) 1031 default n if X86_PC 1032 default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) 1033 help 1034 Enable NUMA (Non Uniform Memory Access) support. 1035 1036 The kernel will try to allocate memory used by a CPU on the 1037 local memory controller of the CPU and add some more 1038 NUMA awareness to the kernel. 1039 1040 For 64-bit this is recommended if the system is Intel Core i7 1041 (or later), AMD Opteron, or EM64T NUMA. 1042 1043 For 32-bit this is only needed on (rare) 32-bit-only platforms 1044 that support NUMA topologies, such as NUMAQ / Summit, or if you 1045 boot a 32-bit kernel on a 64-bit NUMA platform. 1046 1047 Otherwise, you should say N. 1048 1049comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" 1050 depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) 1051 1052config K8_NUMA 1053 def_bool y 1054 prompt "Old style AMD Opteron NUMA detection" 1055 depends on X86_64 && NUMA && PCI 1056 help 1057 Enable K8 NUMA node topology detection. You should say Y here if 1058 you have a multi processor AMD K8 system. This uses an old 1059 method to read the NUMA configuration directly from the builtin 1060 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA 1061 instead, which also takes priority if both are compiled in. 1062 1063config X86_64_ACPI_NUMA 1064 def_bool y 1065 prompt "ACPI NUMA detection" 1066 depends on X86_64 && NUMA && ACPI && PCI 1067 select ACPI_NUMA 1068 help 1069 Enable ACPI SRAT based node topology detection. 1070 1071# Some NUMA nodes have memory ranges that span 1072# other nodes. Even though a pfn is valid and 1073# between a node's start and end pfns, it may not 1074# reside on that node. See memmap_init_zone() 1075# for details. 1076config NODES_SPAN_OTHER_NODES 1077 def_bool y 1078 depends on X86_64_ACPI_NUMA 1079 1080config NUMA_EMU 1081 bool "NUMA emulation" 1082 depends on X86_64 && NUMA 1083 help 1084 Enable NUMA emulation. A flat machine will be split 1085 into virtual nodes when booted with "numa=fake=N", where N is the 1086 number of nodes. This is only useful for debugging. 1087 1088config NODES_SHIFT 1089 int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP 1090 range 1 9 if X86_64 1091 default "9" if MAXSMP 1092 default "6" if X86_64 1093 default "4" if X86_NUMAQ 1094 default "3" 1095 depends on NEED_MULTIPLE_NODES 1096 help 1097 Specify the maximum number of NUMA Nodes available on the target 1098 system. Increases memory reserved to accomodate various tables. 1099 1100config HAVE_ARCH_BOOTMEM_NODE 1101 def_bool y 1102 depends on X86_32 && NUMA 1103 1104config ARCH_HAVE_MEMORY_PRESENT 1105 def_bool y 1106 depends on X86_32 && DISCONTIGMEM 1107 1108config NEED_NODE_MEMMAP_SIZE 1109 def_bool y 1110 depends on X86_32 && (DISCONTIGMEM || SPARSEMEM) 1111 1112config HAVE_ARCH_ALLOC_REMAP 1113 def_bool y 1114 depends on X86_32 && NUMA 1115 1116config ARCH_FLATMEM_ENABLE 1117 def_bool y 1118 depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA 1119 1120config ARCH_DISCONTIGMEM_ENABLE 1121 def_bool y 1122 depends on NUMA && X86_32 1123 1124config ARCH_DISCONTIGMEM_DEFAULT 1125 def_bool y 1126 depends on NUMA && X86_32 1127 1128config ARCH_SPARSEMEM_DEFAULT 1129 def_bool y 1130 depends on X86_64 1131 1132config ARCH_SPARSEMEM_ENABLE 1133 def_bool y 1134 depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH 1135 select SPARSEMEM_STATIC if X86_32 1136 select SPARSEMEM_VMEMMAP_ENABLE if X86_64 1137 1138config ARCH_SELECT_MEMORY_MODEL 1139 def_bool y 1140 depends on ARCH_SPARSEMEM_ENABLE 1141 1142config ARCH_MEMORY_PROBE 1143 def_bool X86_64 1144 depends on MEMORY_HOTPLUG 1145 1146source "mm/Kconfig" 1147 1148config HIGHPTE 1149 bool "Allocate 3rd-level pagetables from highmem" 1150 depends on X86_32 && (HIGHMEM4G || HIGHMEM64G) 1151 help 1152 The VM uses one page table entry for each page of physical memory. 1153 For systems with a lot of RAM, this can be wasteful of precious 1154 low memory. Setting this option will put user-space page table 1155 entries in high memory. 1156 1157config X86_CHECK_BIOS_CORRUPTION 1158 bool "Check for low memory corruption" 1159 help 1160 Periodically check for memory corruption in low memory, which 1161 is suspected to be caused by BIOS. Even when enabled in the 1162 configuration, it is disabled at runtime. Enable it by 1163 setting "memory_corruption_check=1" on the kernel command 1164 line. By default it scans the low 64k of memory every 60 1165 seconds; see the memory_corruption_check_size and 1166 memory_corruption_check_period parameters in 1167 Documentation/kernel-parameters.txt to adjust this. 1168 1169 When enabled with the default parameters, this option has 1170 almost no overhead, as it reserves a relatively small amount 1171 of memory and scans it infrequently. It both detects corruption 1172 and prevents it from affecting the running system. 1173 1174 It is, however, intended as a diagnostic tool; if repeatable 1175 BIOS-originated corruption always affects the same memory, 1176 you can use memmap= to prevent the kernel from using that 1177 memory. 1178 1179config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK 1180 bool "Set the default setting of memory_corruption_check" 1181 depends on X86_CHECK_BIOS_CORRUPTION 1182 default y 1183 help 1184 Set whether the default state of memory_corruption_check is 1185 on or off. 1186 1187config X86_RESERVE_LOW_64K 1188 bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen" 1189 default y 1190 help 1191 Reserve the first 64K of physical RAM on BIOSes that are known 1192 to potentially corrupt that memory range. A numbers of BIOSes are 1193 known to utilize this area during suspend/resume, so it must not 1194 be used by the kernel. 1195 1196 Set this to N if you are absolutely sure that you trust the BIOS 1197 to get all its memory reservations and usages right. 1198 1199 If you have doubts about the BIOS (e.g. suspend/resume does not 1200 work or there's kernel crashes after certain hardware hotplug 1201 events) and it's not AMI or Phoenix, then you might want to enable 1202 X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical 1203 corruption patterns. 1204 1205 Say Y if unsure. 1206 1207config MATH_EMULATION 1208 bool 1209 prompt "Math emulation" if X86_32 1210 ---help--- 1211 Linux can emulate a math coprocessor (used for floating point 1212 operations) if you don't have one. 486DX and Pentium processors have 1213 a math coprocessor built in, 486SX and 386 do not, unless you added 1214 a 487DX or 387, respectively. (The messages during boot time can 1215 give you some hints here ["man dmesg"].) Everyone needs either a 1216 coprocessor or this emulation. 1217 1218 If you don't have a math coprocessor, you need to say Y here; if you 1219 say Y here even though you have a coprocessor, the coprocessor will 1220 be used nevertheless. (This behavior can be changed with the kernel 1221 command line option "no387", which comes handy if your coprocessor 1222 is broken. Try "man bootparam" or see the documentation of your boot 1223 loader (lilo or loadlin) about how to pass options to the kernel at 1224 boot time.) This means that it is a good idea to say Y here if you 1225 intend to use this kernel on different machines. 1226 1227 More information about the internals of the Linux math coprocessor 1228 emulation can be found in <file:arch/x86/math-emu/README>. 1229 1230 If you are not sure, say Y; apart from resulting in a 66 KB bigger 1231 kernel, it won't hurt. 1232 1233config MTRR 1234 bool "MTRR (Memory Type Range Register) support" 1235 ---help--- 1236 On Intel P6 family processors (Pentium Pro, Pentium II and later) 1237 the Memory Type Range Registers (MTRRs) may be used to control 1238 processor access to memory ranges. This is most useful if you have 1239 a video (VGA) card on a PCI or AGP bus. Enabling write-combining 1240 allows bus write transfers to be combined into a larger transfer 1241 before bursting over the PCI/AGP bus. This can increase performance 1242 of image write operations 2.5 times or more. Saying Y here creates a 1243 /proc/mtrr file which may be used to manipulate your processor's 1244 MTRRs. Typically the X server should use this. 1245 1246 This code has a reasonably generic interface so that similar 1247 control registers on other processors can be easily supported 1248 as well: 1249 1250 The Cyrix 6x86, 6x86MX and M II processors have Address Range 1251 Registers (ARRs) which provide a similar functionality to MTRRs. For 1252 these, the ARRs are used to emulate the MTRRs. 1253 The AMD K6-2 (stepping 8 and above) and K6-3 processors have two 1254 MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing 1255 write-combining. All of these processors are supported by this code 1256 and it makes sense to say Y here if you have one of them. 1257 1258 Saying Y here also fixes a problem with buggy SMP BIOSes which only 1259 set the MTRRs for the boot CPU and not for the secondary CPUs. This 1260 can lead to all sorts of problems, so it's good to say Y here. 1261 1262 You can safely say Y even if your machine doesn't have MTRRs, you'll 1263 just add about 9 KB to your kernel. 1264 1265 See <file:Documentation/x86/mtrr.txt> for more information. 1266 1267config MTRR_SANITIZER 1268 def_bool y 1269 prompt "MTRR cleanup support" 1270 depends on MTRR 1271 help 1272 Convert MTRR layout from continuous to discrete, so X drivers can 1273 add writeback entries. 1274 1275 Can be disabled with disable_mtrr_cleanup on the kernel command line. 1276 The largest mtrr entry size for a continous block can be set with 1277 mtrr_chunk_size. 1278 1279 If unsure, say Y. 1280 1281config MTRR_SANITIZER_ENABLE_DEFAULT 1282 int "MTRR cleanup enable value (0-1)" 1283 range 0 1 1284 default "0" 1285 depends on MTRR_SANITIZER 1286 help 1287 Enable mtrr cleanup default value 1288 1289config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT 1290 int "MTRR cleanup spare reg num (0-7)" 1291 range 0 7 1292 default "1" 1293 depends on MTRR_SANITIZER 1294 help 1295 mtrr cleanup spare entries default, it can be changed via 1296 mtrr_spare_reg_nr=N on the kernel command line. 1297 1298config X86_PAT 1299 bool 1300 prompt "x86 PAT support" 1301 depends on MTRR 1302 help 1303 Use PAT attributes to setup page level cache control. 1304 1305 PATs are the modern equivalents of MTRRs and are much more 1306 flexible than MTRRs. 1307 1308 Say N here if you see bootup problems (boot crash, boot hang, 1309 spontaneous reboots) or a non-working video driver. 1310 1311 If unsure, say Y. 1312 1313config EFI 1314 bool "EFI runtime service support" 1315 depends on ACPI 1316 ---help--- 1317 This enables the kernel to use EFI runtime services that are 1318 available (such as the EFI variable services). 1319 1320 This option is only useful on systems that have EFI firmware. 1321 In addition, you should use the latest ELILO loader available 1322 at <http://elilo.sourceforge.net> in order to take advantage 1323 of EFI runtime services. However, even with this option, the 1324 resultant kernel should continue to boot on existing non-EFI 1325 platforms. 1326 1327config SECCOMP 1328 def_bool y 1329 prompt "Enable seccomp to safely compute untrusted bytecode" 1330 help 1331 This kernel feature is useful for number crunching applications 1332 that may need to compute untrusted bytecode during their 1333 execution. By using pipes or other transports made available to 1334 the process as file descriptors supporting the read/write 1335 syscalls, it's possible to isolate those applications in 1336 their own address space using seccomp. Once seccomp is 1337 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled 1338 and the task is only allowed to execute a few safe syscalls 1339 defined by each seccomp mode. 1340 1341 If unsure, say Y. Only embedded should say N here. 1342 1343config CC_STACKPROTECTOR 1344 bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" 1345 depends on X86_64 && EXPERIMENTAL && BROKEN 1346 help 1347 This option turns on the -fstack-protector GCC feature. This 1348 feature puts, at the beginning of critical functions, a canary 1349 value on the stack just before the return address, and validates 1350 the value just before actually returning. Stack based buffer 1351 overflows (that need to overwrite this return address) now also 1352 overwrite the canary, which gets detected and the attack is then 1353 neutralized via a kernel panic. 1354 1355 This feature requires gcc version 4.2 or above, or a distribution 1356 gcc with the feature backported. Older versions are automatically 1357 detected and for those versions, this configuration option is ignored. 1358 1359config CC_STACKPROTECTOR_ALL 1360 bool "Use stack-protector for all functions" 1361 depends on CC_STACKPROTECTOR 1362 help 1363 Normally, GCC only inserts the canary value protection for 1364 functions that use large-ish on-stack buffers. By enabling 1365 this option, GCC will be asked to do this for ALL functions. 1366 1367source kernel/Kconfig.hz 1368 1369config KEXEC 1370 bool "kexec system call" 1371 depends on X86_BIOS_REBOOT 1372 help 1373 kexec is a system call that implements the ability to shutdown your 1374 current kernel, and to start another kernel. It is like a reboot 1375 but it is independent of the system firmware. And like a reboot 1376 you can start any kernel with it, not just Linux. 1377 1378 The name comes from the similarity to the exec system call. 1379 1380 It is an ongoing process to be certain the hardware in a machine 1381 is properly shutdown, so do not be surprised if this code does not 1382 initially work for you. It may help to enable device hotplugging 1383 support. As of this writing the exact hardware interface is 1384 strongly in flux, so no good recommendation can be made. 1385 1386config CRASH_DUMP 1387 bool "kernel crash dumps" 1388 depends on X86_64 || (X86_32 && HIGHMEM) 1389 help 1390 Generate crash dump after being started by kexec. 1391 This should be normally only set in special crash dump kernels 1392 which are loaded in the main kernel with kexec-tools into 1393 a specially reserved region and then later executed after 1394 a crash by kdump/kexec. The crash dump kernel must be compiled 1395 to a memory address not used by the main kernel or BIOS using 1396 PHYSICAL_START, or it must be built as a relocatable image 1397 (CONFIG_RELOCATABLE=y). 1398 For more details see Documentation/kdump/kdump.txt 1399 1400config KEXEC_JUMP 1401 bool "kexec jump (EXPERIMENTAL)" 1402 depends on EXPERIMENTAL 1403 depends on KEXEC && HIBERNATION && X86_32 1404 help 1405 Jump between original kernel and kexeced kernel and invoke 1406 code in physical address mode via KEXEC 1407 1408config PHYSICAL_START 1409 hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) 1410 default "0x1000000" if X86_NUMAQ 1411 default "0x200000" if X86_64 1412 default "0x100000" 1413 help 1414 This gives the physical address where the kernel is loaded. 1415 1416 If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then 1417 bzImage will decompress itself to above physical address and 1418 run from there. Otherwise, bzImage will run from the address where 1419 it has been loaded by the boot loader and will ignore above physical 1420 address. 1421 1422 In normal kdump cases one does not have to set/change this option 1423 as now bzImage can be compiled as a completely relocatable image 1424 (CONFIG_RELOCATABLE=y) and be used to load and run from a different 1425 address. This option is mainly useful for the folks who don't want 1426 to use a bzImage for capturing the crash dump and want to use a 1427 vmlinux instead. vmlinux is not relocatable hence a kernel needs 1428 to be specifically compiled to run from a specific memory area 1429 (normally a reserved region) and this option comes handy. 1430 1431 So if you are using bzImage for capturing the crash dump, leave 1432 the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y. 1433 Otherwise if you plan to use vmlinux for capturing the crash dump 1434 change this value to start of the reserved region (Typically 16MB 1435 0x1000000). In other words, it can be set based on the "X" value as 1436 specified in the "crashkernel=YM@XM" command line boot parameter 1437 passed to the panic-ed kernel. Typically this parameter is set as 1438 crashkernel=64M@16M. Please take a look at 1439 Documentation/kdump/kdump.txt for more details about crash dumps. 1440 1441 Usage of bzImage for capturing the crash dump is recommended as 1442 one does not have to build two kernels. Same kernel can be used 1443 as production kernel and capture kernel. Above option should have 1444 gone away after relocatable bzImage support is introduced. But it 1445 is present because there are users out there who continue to use 1446 vmlinux for dump capture. This option should go away down the 1447 line. 1448 1449 Don't change this unless you know what you are doing. 1450 1451config RELOCATABLE 1452 bool "Build a relocatable kernel (EXPERIMENTAL)" 1453 depends on EXPERIMENTAL 1454 help 1455 This builds a kernel image that retains relocation information 1456 so it can be loaded someplace besides the default 1MB. 1457 The relocations tend to make the kernel binary about 10% larger, 1458 but are discarded at runtime. 1459 1460 One use is for the kexec on panic case where the recovery kernel 1461 must live at a different physical address than the primary 1462 kernel. 1463 1464 Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address 1465 it has been loaded at and the compile time physical address 1466 (CONFIG_PHYSICAL_START) is ignored. 1467 1468config PHYSICAL_ALIGN 1469 hex 1470 prompt "Alignment value to which kernel should be aligned" if X86_32 1471 default "0x100000" if X86_32 1472 default "0x200000" if X86_64 1473 range 0x2000 0x400000 1474 help 1475 This value puts the alignment restrictions on physical address 1476 where kernel is loaded and run from. Kernel is compiled for an 1477 address which meets above alignment restriction. 1478 1479 If bootloader loads the kernel at a non-aligned address and 1480 CONFIG_RELOCATABLE is set, kernel will move itself to nearest 1481 address aligned to above value and run from there. 1482 1483 If bootloader loads the kernel at a non-aligned address and 1484 CONFIG_RELOCATABLE is not set, kernel will ignore the run time 1485 load address and decompress itself to the address it has been 1486 compiled for and run from there. The address for which kernel is 1487 compiled already meets above alignment restrictions. Hence the 1488 end result is that kernel runs from a physical address meeting 1489 above alignment restrictions. 1490 1491 Don't change this unless you know what you are doing. 1492 1493config HOTPLUG_CPU 1494 bool "Support for hot-pluggable CPUs" 1495 depends on SMP && HOTPLUG && !X86_VOYAGER 1496 ---help--- 1497 Say Y here to allow turning CPUs off and on. CPUs can be 1498 controlled through /sys/devices/system/cpu. 1499 ( Note: power management support will enable this option 1500 automatically on SMP systems. ) 1501 Say N if you want to disable CPU hotplug. 1502 1503config COMPAT_VDSO 1504 def_bool y 1505 prompt "Compat VDSO support" 1506 depends on X86_32 || IA32_EMULATION 1507 help 1508 Map the 32-bit VDSO to the predictable old-style address too. 1509 ---help--- 1510 Say N here if you are running a sufficiently recent glibc 1511 version (2.3.3 or later), to remove the high-mapped 1512 VDSO mapping and to exclusively use the randomized VDSO. 1513 1514 If unsure, say Y. 1515 1516config CMDLINE_BOOL 1517 bool "Built-in kernel command line" 1518 default n 1519 help 1520 Allow for specifying boot arguments to the kernel at 1521 build time. On some systems (e.g. embedded ones), it is 1522 necessary or convenient to provide some or all of the 1523 kernel boot arguments with the kernel itself (that is, 1524 to not rely on the boot loader to provide them.) 1525 1526 To compile command line arguments into the kernel, 1527 set this option to 'Y', then fill in the 1528 the boot arguments in CONFIG_CMDLINE. 1529 1530 Systems with fully functional boot loaders (i.e. non-embedded) 1531 should leave this option set to 'N'. 1532 1533config CMDLINE 1534 string "Built-in kernel command string" 1535 depends on CMDLINE_BOOL 1536 default "" 1537 help 1538 Enter arguments here that should be compiled into the kernel 1539 image and used at boot time. If the boot loader provides a 1540 command line at boot time, it is appended to this string to 1541 form the full kernel command line, when the system boots. 1542 1543 However, you can use the CONFIG_CMDLINE_OVERRIDE option to 1544 change this behavior. 1545 1546 In most cases, the command line (whether built-in or provided 1547 by the boot loader) should specify the device for the root 1548 file system. 1549 1550config CMDLINE_OVERRIDE 1551 bool "Built-in command line overrides boot loader arguments" 1552 default n 1553 depends on CMDLINE_BOOL 1554 help 1555 Set this option to 'Y' to have the kernel ignore the boot loader 1556 command line, and use ONLY the built-in command line. 1557 1558 This is used to work around broken boot loaders. This should 1559 be set to 'N' under normal conditions. 1560 1561endmenu 1562 1563config ARCH_ENABLE_MEMORY_HOTPLUG 1564 def_bool y 1565 depends on X86_64 || (X86_32 && HIGHMEM) 1566 1567config ARCH_ENABLE_MEMORY_HOTREMOVE 1568 def_bool y 1569 depends on MEMORY_HOTPLUG 1570 1571config HAVE_ARCH_EARLY_PFN_TO_NID 1572 def_bool X86_64 1573 depends on NUMA 1574 1575menu "Power management and ACPI options" 1576 depends on !X86_VOYAGER 1577 1578config ARCH_HIBERNATION_HEADER 1579 def_bool y 1580 depends on X86_64 && HIBERNATION 1581 1582source "kernel/power/Kconfig" 1583 1584source "drivers/acpi/Kconfig" 1585 1586config X86_APM_BOOT 1587 bool 1588 default y 1589 depends on APM || APM_MODULE 1590 1591menuconfig APM 1592 tristate "APM (Advanced Power Management) BIOS support" 1593 depends on X86_32 && PM_SLEEP 1594 ---help--- 1595 APM is a BIOS specification for saving power using several different 1596 techniques. This is mostly useful for battery powered laptops with 1597 APM compliant BIOSes. If you say Y here, the system time will be 1598 reset after a RESUME operation, the /proc/apm device will provide 1599 battery status information, and user-space programs will receive 1600 notification of APM "events" (e.g. battery status change). 1601 1602 If you select "Y" here, you can disable actual use of the APM 1603 BIOS by passing the "apm=off" option to the kernel at boot time. 1604 1605 Note that the APM support is almost completely disabled for 1606 machines with more than one CPU. 1607 1608 In order to use APM, you will need supporting software. For location 1609 and more information, read <file:Documentation/power/pm.txt> and the 1610 Battery Powered Linux mini-HOWTO, available from 1611 <http://www.tldp.org/docs.html#howto>. 1612 1613 This driver does not spin down disk drives (see the hdparm(8) 1614 manpage ("man 8 hdparm") for that), and it doesn't turn off 1615 VESA-compliant "green" monitors. 1616 1617 This driver does not support the TI 4000M TravelMate and the ACER 1618 486/DX4/75 because they don't have compliant BIOSes. Many "green" 1619 desktop machines also don't have compliant BIOSes, and this driver 1620 may cause those machines to panic during the boot phase. 1621 1622 Generally, if you don't have a battery in your machine, there isn't 1623 much point in using this driver and you should say N. If you get 1624 random kernel OOPSes or reboots that don't seem to be related to 1625 anything, try disabling/enabling this option (or disabling/enabling 1626 APM in your BIOS). 1627 1628 Some other things you should try when experiencing seemingly random, 1629 "weird" problems: 1630 1631 1) make sure that you have enough swap space and that it is 1632 enabled. 1633 2) pass the "no-hlt" option to the kernel 1634 3) switch on floating point emulation in the kernel and pass 1635 the "no387" option to the kernel 1636 4) pass the "floppy=nodma" option to the kernel 1637 5) pass the "mem=4M" option to the kernel (thereby disabling 1638 all but the first 4 MB of RAM) 1639 6) make sure that the CPU is not over clocked. 1640 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/> 1641 8) disable the cache from your BIOS settings 1642 9) install a fan for the video card or exchange video RAM 1643 10) install a better fan for the CPU 1644 11) exchange RAM chips 1645 12) exchange the motherboard. 1646 1647 To compile this driver as a module, choose M here: the 1648 module will be called apm. 1649 1650if APM 1651 1652config APM_IGNORE_USER_SUSPEND 1653 bool "Ignore USER SUSPEND" 1654 help 1655 This option will ignore USER SUSPEND requests. On machines with a 1656 compliant APM BIOS, you want to say N. However, on the NEC Versa M 1657 series notebooks, it is necessary to say Y because of a BIOS bug. 1658 1659config APM_DO_ENABLE 1660 bool "Enable PM at boot time" 1661 ---help--- 1662 Enable APM features at boot time. From page 36 of the APM BIOS 1663 specification: "When disabled, the APM BIOS does not automatically 1664 power manage devices, enter the Standby State, enter the Suspend 1665 State, or take power saving steps in response to CPU Idle calls." 1666 This driver will make CPU Idle calls when Linux is idle (unless this 1667 feature is turned off -- see "Do CPU IDLE calls", below). This 1668 should always save battery power, but more complicated APM features 1669 will be dependent on your BIOS implementation. You may need to turn 1670 this option off if your computer hangs at boot time when using APM 1671 support, or if it beeps continuously instead of suspending. Turn 1672 this off if you have a NEC UltraLite Versa 33/C or a Toshiba 1673 T400CDT. This is off by default since most machines do fine without 1674 this feature. 1675 1676config APM_CPU_IDLE 1677 bool "Make CPU Idle calls when idle" 1678 help 1679 Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop. 1680 On some machines, this can activate improved power savings, such as 1681 a slowed CPU clock rate, when the machine is idle. These idle calls 1682 are made after the idle loop has run for some length of time (e.g., 1683 333 mS). On some machines, this will cause a hang at boot time or 1684 whenever the CPU becomes idle. (On machines with more than one CPU, 1685 this option does nothing.) 1686 1687config APM_DISPLAY_BLANK 1688 bool "Enable console blanking using APM" 1689 help 1690 Enable console blanking using the APM. Some laptops can use this to 1691 turn off the LCD backlight when the screen blanker of the Linux 1692 virtual console blanks the screen. Note that this is only used by 1693 the virtual console screen blanker, and won't turn off the backlight 1694 when using the X Window system. This also doesn't have anything to 1695 do with your VESA-compliant power-saving monitor. Further, this 1696 option doesn't work for all laptops -- it might not turn off your 1697 backlight at all, or it might print a lot of errors to the console, 1698 especially if you are using gpm. 1699 1700config APM_ALLOW_INTS 1701 bool "Allow interrupts during APM BIOS calls" 1702 help 1703 Normally we disable external interrupts while we are making calls to 1704 the APM BIOS as a measure to lessen the effects of a badly behaving 1705 BIOS implementation. The BIOS should reenable interrupts if it 1706 needs to. Unfortunately, some BIOSes do not -- especially those in 1707 many of the newer IBM Thinkpads. If you experience hangs when you 1708 suspend, try setting this to Y. Otherwise, say N. 1709 1710endif # APM 1711 1712source "arch/x86/kernel/cpu/cpufreq/Kconfig" 1713 1714source "drivers/cpuidle/Kconfig" 1715 1716source "drivers/idle/Kconfig" 1717 1718endmenu 1719 1720 1721menu "Bus options (PCI etc.)" 1722 1723config PCI 1724 bool "PCI support" 1725 default y 1726 select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) 1727 help 1728 Find out whether you have a PCI motherboard. PCI is the name of a 1729 bus system, i.e. the way the CPU talks to the other stuff inside 1730 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or 1731 VESA. If you have PCI, say Y, otherwise N. 1732 1733choice 1734 prompt "PCI access mode" 1735 depends on X86_32 && PCI 1736 default PCI_GOANY 1737 ---help--- 1738 On PCI systems, the BIOS can be used to detect the PCI devices and 1739 determine their configuration. However, some old PCI motherboards 1740 have BIOS bugs and may crash if this is done. Also, some embedded 1741 PCI-based systems don't have any BIOS at all. Linux can also try to 1742 detect the PCI hardware directly without using the BIOS. 1743 1744 With this option, you can specify how Linux should detect the 1745 PCI devices. If you choose "BIOS", the BIOS will be used, 1746 if you choose "Direct", the BIOS won't be used, and if you 1747 choose "MMConfig", then PCI Express MMCONFIG will be used. 1748 If you choose "Any", the kernel will try MMCONFIG, then the 1749 direct access method and falls back to the BIOS if that doesn't 1750 work. If unsure, go with the default, which is "Any". 1751 1752config PCI_GOBIOS 1753 bool "BIOS" 1754 1755config PCI_GOMMCONFIG 1756 bool "MMConfig" 1757 1758config PCI_GODIRECT 1759 bool "Direct" 1760 1761config PCI_GOOLPC 1762 bool "OLPC" 1763 depends on OLPC 1764 1765config PCI_GOANY 1766 bool "Any" 1767 1768endchoice 1769 1770config PCI_BIOS 1771 def_bool y 1772 depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY) 1773 1774# x86-64 doesn't support PCI BIOS access from long mode so always go direct. 1775config PCI_DIRECT 1776 def_bool y 1777 depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC)) 1778 1779config PCI_MMCONFIG 1780 def_bool y 1781 depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) 1782 1783config PCI_OLPC 1784 def_bool y 1785 depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY) 1786 1787config PCI_DOMAINS 1788 def_bool y 1789 depends on PCI 1790 1791config PCI_MMCONFIG 1792 bool "Support mmconfig PCI config space access" 1793 depends on X86_64 && PCI && ACPI 1794 1795config DMAR 1796 bool "Support for DMA Remapping Devices (EXPERIMENTAL)" 1797 depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL 1798 help 1799 DMA remapping (DMAR) devices support enables independent address 1800 translations for Direct Memory Access (DMA) from devices. 1801 These DMA remapping devices are reported via ACPI tables 1802 and include PCI device scope covered by these DMA 1803 remapping devices. 1804 1805config DMAR_DEFAULT_ON 1806 def_bool n 1807 prompt "Enable DMA Remapping Devices by default" 1808 depends on DMAR 1809 help 1810 Selecting this option will enable a DMAR device at boot time if 1811 one is found. If this option is not selected, DMAR support can 1812 be enabled by passing intel_iommu=on to the kernel. It is 1813 recommended you say N here while the DMAR code remains 1814 experimental. 1815 1816config DMAR_GFX_WA 1817 def_bool y 1818 prompt "Support for Graphics workaround" 1819 depends on DMAR 1820 help 1821 Current Graphics drivers tend to use physical address 1822 for DMA and avoid using DMA APIs. Setting this config 1823 option permits the IOMMU driver to set a unity map for 1824 all the OS-visible memory. Hence the driver can continue 1825 to use physical addresses for DMA. 1826 1827config DMAR_FLOPPY_WA 1828 def_bool y 1829 depends on DMAR 1830 help 1831 Floppy disk drivers are know to bypass DMA API calls 1832 thereby failing to work when IOMMU is enabled. This 1833 workaround will setup a 1:1 mapping for the first 1834 16M to make floppy (an ISA device) work. 1835 1836config INTR_REMAP 1837 bool "Support for Interrupt Remapping (EXPERIMENTAL)" 1838 depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL 1839 help 1840 Supports Interrupt remapping for IO-APIC and MSI devices. 1841 To use x2apic mode in the CPU's which support x2APIC enhancements or 1842 to support platforms with CPU's having > 8 bit APIC ID, say Y. 1843 1844source "drivers/pci/pcie/Kconfig" 1845 1846source "drivers/pci/Kconfig" 1847 1848# x86_64 have no ISA slots, but do have ISA-style DMA. 1849config ISA_DMA_API 1850 def_bool y 1851 1852if X86_32 1853 1854config ISA 1855 bool "ISA support" 1856 depends on !X86_VOYAGER 1857 help 1858 Find out whether you have ISA slots on your motherboard. ISA is the 1859 name of a bus system, i.e. the way the CPU talks to the other stuff 1860 inside your box. Other bus systems are PCI, EISA, MicroChannel 1861 (MCA) or VESA. ISA is an older system, now being displaced by PCI; 1862 newer boards don't support it. If you have ISA, say Y, otherwise N. 1863 1864config EISA 1865 bool "EISA support" 1866 depends on ISA 1867 ---help--- 1868 The Extended Industry Standard Architecture (EISA) bus was 1869 developed as an open alternative to the IBM MicroChannel bus. 1870 1871 The EISA bus provided some of the features of the IBM MicroChannel 1872 bus while maintaining backward compatibility with cards made for 1873 the older ISA bus. The EISA bus saw limited use between 1988 and 1874 1995 when it was made obsolete by the PCI bus. 1875 1876 Say Y here if you are building a kernel for an EISA-based machine. 1877 1878 Otherwise, say N. 1879 1880source "drivers/eisa/Kconfig" 1881 1882config MCA 1883 bool "MCA support" if !X86_VOYAGER 1884 default y if X86_VOYAGER 1885 help 1886 MicroChannel Architecture is found in some IBM PS/2 machines and 1887 laptops. It is a bus system similar to PCI or ISA. See 1888 <file:Documentation/mca.txt> (and especially the web page given 1889 there) before attempting to build an MCA bus kernel. 1890 1891source "drivers/mca/Kconfig" 1892 1893config SCx200 1894 tristate "NatSemi SCx200 support" 1895 depends on !X86_VOYAGER 1896 help 1897 This provides basic support for National Semiconductor's 1898 (now AMD's) Geode processors. The driver probes for the 1899 PCI-IDs of several on-chip devices, so its a good dependency 1900 for other scx200_* drivers. 1901 1902 If compiled as a module, the driver is named scx200. 1903 1904config SCx200HR_TIMER 1905 tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" 1906 depends on SCx200 && GENERIC_TIME 1907 default y 1908 help 1909 This driver provides a clocksource built upon the on-chip 1910 27MHz high-resolution timer. Its also a workaround for 1911 NSC Geode SC-1100's buggy TSC, which loses time when the 1912 processor goes idle (as is done by the scheduler). The 1913 other workaround is idle=poll boot option. 1914 1915config GEODE_MFGPT_TIMER 1916 def_bool y 1917 prompt "Geode Multi-Function General Purpose Timer (MFGPT) events" 1918 depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS 1919 help 1920 This driver provides a clock event source based on the MFGPT 1921 timer(s) in the CS5535 and CS5536 companion chip for the geode. 1922 MFGPTs have a better resolution and max interval than the 1923 generic PIT, and are suitable for use as high-res timers. 1924 1925config OLPC 1926 bool "One Laptop Per Child support" 1927 default n 1928 help 1929 Add support for detecting the unique features of the OLPC 1930 XO hardware. 1931 1932endif # X86_32 1933 1934config K8_NB 1935 def_bool y 1936 depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA))) 1937 1938source "drivers/pcmcia/Kconfig" 1939 1940source "drivers/pci/hotplug/Kconfig" 1941 1942endmenu 1943 1944 1945menu "Executable file formats / Emulations" 1946 1947source "fs/Kconfig.binfmt" 1948 1949config IA32_EMULATION 1950 bool "IA32 Emulation" 1951 depends on X86_64 1952 select COMPAT_BINFMT_ELF 1953 help 1954 Include code to run 32-bit programs under a 64-bit kernel. You should 1955 likely turn this on, unless you're 100% sure that you don't have any 1956 32-bit programs left. 1957 1958config IA32_AOUT 1959 tristate "IA32 a.out support" 1960 depends on IA32_EMULATION 1961 help 1962 Support old a.out binaries in the 32bit emulation. 1963 1964config COMPAT 1965 def_bool y 1966 depends on IA32_EMULATION 1967 1968config COMPAT_FOR_U64_ALIGNMENT 1969 def_bool COMPAT 1970 depends on X86_64 1971 1972config SYSVIPC_COMPAT 1973 def_bool y 1974 depends on COMPAT && SYSVIPC 1975 1976endmenu 1977 1978 1979config HAVE_ATOMIC_IOMAP 1980 def_bool y 1981 depends on X86_32 1982 1983source "net/Kconfig" 1984 1985source "drivers/Kconfig" 1986 1987source "drivers/firmware/Kconfig" 1988 1989source "fs/Kconfig" 1990 1991source "arch/x86/Kconfig.debug" 1992 1993source "security/Kconfig" 1994 1995source "crypto/Kconfig" 1996 1997source "arch/x86/kvm/Kconfig" 1998 1999source "lib/Kconfig" 2000