1 // SPDX-License-Identifier: GPL-2.0
2 #include <linux/kernel.h>
3 #include <linux/string.h>
4 #include <linux/init.h>
5 #include <linux/of.h>
6 #include <linux/of_platform.h>
7 #include <linux/platform_device.h>
8
9 #include <asm/oplib.h>
10 #include <asm/prom.h>
11 #include <asm/irq.h>
12 #include <asm/upa.h>
13
14 #include "prom.h"
15
16 #ifdef CONFIG_PCI
17 /* PSYCHO interrupt mapping support. */
18 #define PSYCHO_IMAP_A_SLOT0 0x0c00UL
19 #define PSYCHO_IMAP_B_SLOT0 0x0c20UL
psycho_pcislot_imap_offset(unsigned long ino)20 static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
21 {
22 unsigned int bus = (ino & 0x10) >> 4;
23 unsigned int slot = (ino & 0x0c) >> 2;
24
25 if (bus == 0)
26 return PSYCHO_IMAP_A_SLOT0 + (slot * 8);
27 else
28 return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
29 }
30
31 #define PSYCHO_OBIO_IMAP_BASE 0x1000UL
32
33 #define PSYCHO_ONBOARD_IRQ_BASE 0x20
34 #define psycho_onboard_imap_offset(__ino) \
35 (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
36
37 #define PSYCHO_ICLR_A_SLOT0 0x1400UL
38 #define PSYCHO_ICLR_SCSI 0x1800UL
39
40 #define psycho_iclr_offset(ino) \
41 ((ino & 0x20) ? (PSYCHO_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
42 (PSYCHO_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
43
psycho_irq_build(struct device_node * dp,unsigned int ino,void * _data)44 static unsigned int psycho_irq_build(struct device_node *dp,
45 unsigned int ino,
46 void *_data)
47 {
48 unsigned long controller_regs = (unsigned long) _data;
49 unsigned long imap, iclr;
50 unsigned long imap_off, iclr_off;
51 int inofixup = 0;
52
53 ino &= 0x3f;
54 if (ino < PSYCHO_ONBOARD_IRQ_BASE) {
55 /* PCI slot */
56 imap_off = psycho_pcislot_imap_offset(ino);
57 } else {
58 /* Onboard device */
59 imap_off = psycho_onboard_imap_offset(ino);
60 }
61
62 /* Now build the IRQ bucket. */
63 imap = controller_regs + imap_off;
64
65 iclr_off = psycho_iclr_offset(ino);
66 iclr = controller_regs + iclr_off;
67
68 if ((ino & 0x20) == 0)
69 inofixup = ino & 0x03;
70
71 return build_irq(inofixup, iclr, imap);
72 }
73
psycho_irq_trans_init(struct device_node * dp)74 static void __init psycho_irq_trans_init(struct device_node *dp)
75 {
76 const struct linux_prom64_registers *regs;
77
78 dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
79 dp->irq_trans->irq_build = psycho_irq_build;
80
81 regs = of_get_property(dp, "reg", NULL);
82 dp->irq_trans->data = (void *) regs[2].phys_addr;
83 }
84
85 #define sabre_read(__reg) \
86 ({ u64 __ret; \
87 __asm__ __volatile__("ldxa [%1] %2, %0" \
88 : "=r" (__ret) \
89 : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
90 : "memory"); \
91 __ret; \
92 })
93
94 struct sabre_irq_data {
95 unsigned long controller_regs;
96 unsigned int pci_first_busno;
97 };
98 #define SABRE_CONFIGSPACE 0x001000000UL
99 #define SABRE_WRSYNC 0x1c20UL
100
101 #define SABRE_CONFIG_BASE(CONFIG_SPACE) \
102 (CONFIG_SPACE | (1UL << 24))
103 #define SABRE_CONFIG_ENCODE(BUS, DEVFN, REG) \
104 (((unsigned long)(BUS) << 16) | \
105 ((unsigned long)(DEVFN) << 8) | \
106 ((unsigned long)(REG)))
107
108 /* When a device lives behind a bridge deeper in the PCI bus topology
109 * than APB, a special sequence must run to make sure all pending DMA
110 * transfers at the time of IRQ delivery are visible in the coherency
111 * domain by the cpu. This sequence is to perform a read on the far
112 * side of the non-APB bridge, then perform a read of Sabre's DMA
113 * write-sync register.
114 */
sabre_wsync_handler(unsigned int ino,void * _arg1,void * _arg2)115 static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
116 {
117 unsigned int phys_hi = (unsigned int) (unsigned long) _arg1;
118 struct sabre_irq_data *irq_data = _arg2;
119 unsigned long controller_regs = irq_data->controller_regs;
120 unsigned long sync_reg = controller_regs + SABRE_WRSYNC;
121 unsigned long config_space = controller_regs + SABRE_CONFIGSPACE;
122 unsigned int bus, devfn;
123 u16 _unused;
124
125 config_space = SABRE_CONFIG_BASE(config_space);
126
127 bus = (phys_hi >> 16) & 0xff;
128 devfn = (phys_hi >> 8) & 0xff;
129
130 config_space |= SABRE_CONFIG_ENCODE(bus, devfn, 0x00);
131
132 __asm__ __volatile__("membar #Sync\n\t"
133 "lduha [%1] %2, %0\n\t"
134 "membar #Sync"
135 : "=r" (_unused)
136 : "r" ((u16 *) config_space),
137 "i" (ASI_PHYS_BYPASS_EC_E_L)
138 : "memory");
139
140 sabre_read(sync_reg);
141 }
142
143 #define SABRE_IMAP_A_SLOT0 0x0c00UL
144 #define SABRE_IMAP_B_SLOT0 0x0c20UL
145 #define SABRE_ICLR_A_SLOT0 0x1400UL
146 #define SABRE_ICLR_B_SLOT0 0x1480UL
147 #define SABRE_ICLR_SCSI 0x1800UL
148 #define SABRE_ICLR_ETH 0x1808UL
149 #define SABRE_ICLR_BPP 0x1810UL
150 #define SABRE_ICLR_AU_REC 0x1818UL
151 #define SABRE_ICLR_AU_PLAY 0x1820UL
152 #define SABRE_ICLR_PFAIL 0x1828UL
153 #define SABRE_ICLR_KMS 0x1830UL
154 #define SABRE_ICLR_FLPY 0x1838UL
155 #define SABRE_ICLR_SHW 0x1840UL
156 #define SABRE_ICLR_KBD 0x1848UL
157 #define SABRE_ICLR_MS 0x1850UL
158 #define SABRE_ICLR_SER 0x1858UL
159 #define SABRE_ICLR_UE 0x1870UL
160 #define SABRE_ICLR_CE 0x1878UL
161 #define SABRE_ICLR_PCIERR 0x1880UL
162
sabre_pcislot_imap_offset(unsigned long ino)163 static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
164 {
165 unsigned int bus = (ino & 0x10) >> 4;
166 unsigned int slot = (ino & 0x0c) >> 2;
167
168 if (bus == 0)
169 return SABRE_IMAP_A_SLOT0 + (slot * 8);
170 else
171 return SABRE_IMAP_B_SLOT0 + (slot * 8);
172 }
173
174 #define SABRE_OBIO_IMAP_BASE 0x1000UL
175 #define SABRE_ONBOARD_IRQ_BASE 0x20
176 #define sabre_onboard_imap_offset(__ino) \
177 (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
178
179 #define sabre_iclr_offset(ino) \
180 ((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
181 (SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
182
sabre_device_needs_wsync(struct device_node * dp)183 static int sabre_device_needs_wsync(struct device_node *dp)
184 {
185 struct device_node *parent = dp->parent;
186 const char *parent_model, *parent_compat;
187
188 /* This traversal up towards the root is meant to
189 * handle two cases:
190 *
191 * 1) non-PCI bus sitting under PCI, such as 'ebus'
192 * 2) the PCI controller interrupts themselves, which
193 * will use the sabre_irq_build but do not need
194 * the DMA synchronization handling
195 */
196 while (parent) {
197 if (of_node_is_type(parent, "pci"))
198 break;
199 parent = parent->parent;
200 }
201
202 if (!parent)
203 return 0;
204
205 parent_model = of_get_property(parent,
206 "model", NULL);
207 if (parent_model &&
208 (!strcmp(parent_model, "SUNW,sabre") ||
209 !strcmp(parent_model, "SUNW,simba")))
210 return 0;
211
212 parent_compat = of_get_property(parent,
213 "compatible", NULL);
214 if (parent_compat &&
215 (!strcmp(parent_compat, "pci108e,a000") ||
216 !strcmp(parent_compat, "pci108e,a001")))
217 return 0;
218
219 return 1;
220 }
221
sabre_irq_build(struct device_node * dp,unsigned int ino,void * _data)222 static unsigned int sabre_irq_build(struct device_node *dp,
223 unsigned int ino,
224 void *_data)
225 {
226 struct sabre_irq_data *irq_data = _data;
227 unsigned long controller_regs = irq_data->controller_regs;
228 const struct linux_prom_pci_registers *regs;
229 unsigned long imap, iclr;
230 unsigned long imap_off, iclr_off;
231 int inofixup = 0;
232 int irq;
233
234 ino &= 0x3f;
235 if (ino < SABRE_ONBOARD_IRQ_BASE) {
236 /* PCI slot */
237 imap_off = sabre_pcislot_imap_offset(ino);
238 } else {
239 /* onboard device */
240 imap_off = sabre_onboard_imap_offset(ino);
241 }
242
243 /* Now build the IRQ bucket. */
244 imap = controller_regs + imap_off;
245
246 iclr_off = sabre_iclr_offset(ino);
247 iclr = controller_regs + iclr_off;
248
249 if ((ino & 0x20) == 0)
250 inofixup = ino & 0x03;
251
252 irq = build_irq(inofixup, iclr, imap);
253
254 /* If the parent device is a PCI<->PCI bridge other than
255 * APB, we have to install a pre-handler to ensure that
256 * all pending DMA is drained before the interrupt handler
257 * is run.
258 */
259 regs = of_get_property(dp, "reg", NULL);
260 if (regs && sabre_device_needs_wsync(dp)) {
261 irq_install_pre_handler(irq,
262 sabre_wsync_handler,
263 (void *) (long) regs->phys_hi,
264 (void *) irq_data);
265 }
266
267 return irq;
268 }
269
sabre_irq_trans_init(struct device_node * dp)270 static void __init sabre_irq_trans_init(struct device_node *dp)
271 {
272 const struct linux_prom64_registers *regs;
273 struct sabre_irq_data *irq_data;
274 const u32 *busrange;
275
276 dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
277 dp->irq_trans->irq_build = sabre_irq_build;
278
279 irq_data = prom_early_alloc(sizeof(struct sabre_irq_data));
280
281 regs = of_get_property(dp, "reg", NULL);
282 irq_data->controller_regs = regs[0].phys_addr;
283
284 busrange = of_get_property(dp, "bus-range", NULL);
285 irq_data->pci_first_busno = busrange[0];
286
287 dp->irq_trans->data = irq_data;
288 }
289
290 /* SCHIZO interrupt mapping support. Unlike Psycho, for this controller the
291 * imap/iclr registers are per-PBM.
292 */
293 #define SCHIZO_IMAP_BASE 0x1000UL
294 #define SCHIZO_ICLR_BASE 0x1400UL
295
schizo_imap_offset(unsigned long ino)296 static unsigned long schizo_imap_offset(unsigned long ino)
297 {
298 return SCHIZO_IMAP_BASE + (ino * 8UL);
299 }
300
schizo_iclr_offset(unsigned long ino)301 static unsigned long schizo_iclr_offset(unsigned long ino)
302 {
303 return SCHIZO_ICLR_BASE + (ino * 8UL);
304 }
305
schizo_ino_to_iclr(unsigned long pbm_regs,unsigned int ino)306 static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs,
307 unsigned int ino)
308 {
309
310 return pbm_regs + schizo_iclr_offset(ino);
311 }
312
schizo_ino_to_imap(unsigned long pbm_regs,unsigned int ino)313 static unsigned long schizo_ino_to_imap(unsigned long pbm_regs,
314 unsigned int ino)
315 {
316 return pbm_regs + schizo_imap_offset(ino);
317 }
318
319 #define schizo_read(__reg) \
320 ({ u64 __ret; \
321 __asm__ __volatile__("ldxa [%1] %2, %0" \
322 : "=r" (__ret) \
323 : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
324 : "memory"); \
325 __ret; \
326 })
327 #define schizo_write(__reg, __val) \
328 __asm__ __volatile__("stxa %0, [%1] %2" \
329 : /* no outputs */ \
330 : "r" (__val), "r" (__reg), \
331 "i" (ASI_PHYS_BYPASS_EC_E) \
332 : "memory")
333
tomatillo_wsync_handler(unsigned int ino,void * _arg1,void * _arg2)334 static void tomatillo_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
335 {
336 unsigned long sync_reg = (unsigned long) _arg2;
337 u64 mask = 1UL << (ino & IMAP_INO);
338 u64 val;
339 int limit;
340
341 schizo_write(sync_reg, mask);
342
343 limit = 100000;
344 val = 0;
345 while (--limit) {
346 val = schizo_read(sync_reg);
347 if (!(val & mask))
348 break;
349 }
350 if (limit <= 0) {
351 printk("tomatillo_wsync_handler: DMA won't sync [%llx:%llx]\n",
352 val, mask);
353 }
354
355 if (_arg1) {
356 static unsigned char cacheline[64]
357 __attribute__ ((aligned (64)));
358
359 __asm__ __volatile__("rd %%fprs, %0\n\t"
360 "or %0, %4, %1\n\t"
361 "wr %1, 0x0, %%fprs\n\t"
362 "stda %%f0, [%5] %6\n\t"
363 "wr %0, 0x0, %%fprs\n\t"
364 "membar #Sync"
365 : "=&r" (mask), "=&r" (val)
366 : "0" (mask), "1" (val),
367 "i" (FPRS_FEF), "r" (&cacheline[0]),
368 "i" (ASI_BLK_COMMIT_P));
369 }
370 }
371
372 struct schizo_irq_data {
373 unsigned long pbm_regs;
374 unsigned long sync_reg;
375 u32 portid;
376 int chip_version;
377 };
378
schizo_irq_build(struct device_node * dp,unsigned int ino,void * _data)379 static unsigned int schizo_irq_build(struct device_node *dp,
380 unsigned int ino,
381 void *_data)
382 {
383 struct schizo_irq_data *irq_data = _data;
384 unsigned long pbm_regs = irq_data->pbm_regs;
385 unsigned long imap, iclr;
386 int ign_fixup;
387 int irq;
388 int is_tomatillo;
389
390 ino &= 0x3f;
391
392 /* Now build the IRQ bucket. */
393 imap = schizo_ino_to_imap(pbm_regs, ino);
394 iclr = schizo_ino_to_iclr(pbm_regs, ino);
395
396 /* On Schizo, no inofixup occurs. This is because each
397 * INO has its own IMAP register. On Psycho and Sabre
398 * there is only one IMAP register for each PCI slot even
399 * though four different INOs can be generated by each
400 * PCI slot.
401 *
402 * But, for JBUS variants (essentially, Tomatillo), we have
403 * to fixup the lowest bit of the interrupt group number.
404 */
405 ign_fixup = 0;
406
407 is_tomatillo = (irq_data->sync_reg != 0UL);
408
409 if (is_tomatillo) {
410 if (irq_data->portid & 1)
411 ign_fixup = (1 << 6);
412 }
413
414 irq = build_irq(ign_fixup, iclr, imap);
415
416 if (is_tomatillo) {
417 irq_install_pre_handler(irq,
418 tomatillo_wsync_handler,
419 ((irq_data->chip_version <= 4) ?
420 (void *) 1 : (void *) 0),
421 (void *) irq_data->sync_reg);
422 }
423
424 return irq;
425 }
426
__schizo_irq_trans_init(struct device_node * dp,int is_tomatillo)427 static void __init __schizo_irq_trans_init(struct device_node *dp,
428 int is_tomatillo)
429 {
430 const struct linux_prom64_registers *regs;
431 struct schizo_irq_data *irq_data;
432
433 dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
434 dp->irq_trans->irq_build = schizo_irq_build;
435
436 irq_data = prom_early_alloc(sizeof(struct schizo_irq_data));
437
438 regs = of_get_property(dp, "reg", NULL);
439 dp->irq_trans->data = irq_data;
440
441 irq_data->pbm_regs = regs[0].phys_addr;
442 if (is_tomatillo)
443 irq_data->sync_reg = regs[3].phys_addr + 0x1a18UL;
444 else
445 irq_data->sync_reg = 0UL;
446 irq_data->portid = of_getintprop_default(dp, "portid", 0);
447 irq_data->chip_version = of_getintprop_default(dp, "version#", 0);
448 }
449
schizo_irq_trans_init(struct device_node * dp)450 static void __init schizo_irq_trans_init(struct device_node *dp)
451 {
452 __schizo_irq_trans_init(dp, 0);
453 }
454
tomatillo_irq_trans_init(struct device_node * dp)455 static void __init tomatillo_irq_trans_init(struct device_node *dp)
456 {
457 __schizo_irq_trans_init(dp, 1);
458 }
459
pci_sun4v_irq_build(struct device_node * dp,unsigned int devino,void * _data)460 static unsigned int pci_sun4v_irq_build(struct device_node *dp,
461 unsigned int devino,
462 void *_data)
463 {
464 u32 devhandle = (u32) (unsigned long) _data;
465
466 return sun4v_build_irq(devhandle, devino);
467 }
468
pci_sun4v_irq_trans_init(struct device_node * dp)469 static void __init pci_sun4v_irq_trans_init(struct device_node *dp)
470 {
471 const struct linux_prom64_registers *regs;
472
473 dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
474 dp->irq_trans->irq_build = pci_sun4v_irq_build;
475
476 regs = of_get_property(dp, "reg", NULL);
477 dp->irq_trans->data = (void *) (unsigned long)
478 ((regs->phys_addr >> 32UL) & 0x0fffffff);
479 }
480
481 struct fire_irq_data {
482 unsigned long pbm_regs;
483 u32 portid;
484 };
485
486 #define FIRE_IMAP_BASE 0x001000
487 #define FIRE_ICLR_BASE 0x001400
488
fire_imap_offset(unsigned long ino)489 static unsigned long fire_imap_offset(unsigned long ino)
490 {
491 return FIRE_IMAP_BASE + (ino * 8UL);
492 }
493
fire_iclr_offset(unsigned long ino)494 static unsigned long fire_iclr_offset(unsigned long ino)
495 {
496 return FIRE_ICLR_BASE + (ino * 8UL);
497 }
498
fire_ino_to_iclr(unsigned long pbm_regs,unsigned int ino)499 static unsigned long fire_ino_to_iclr(unsigned long pbm_regs,
500 unsigned int ino)
501 {
502 return pbm_regs + fire_iclr_offset(ino);
503 }
504
fire_ino_to_imap(unsigned long pbm_regs,unsigned int ino)505 static unsigned long fire_ino_to_imap(unsigned long pbm_regs,
506 unsigned int ino)
507 {
508 return pbm_regs + fire_imap_offset(ino);
509 }
510
fire_irq_build(struct device_node * dp,unsigned int ino,void * _data)511 static unsigned int fire_irq_build(struct device_node *dp,
512 unsigned int ino,
513 void *_data)
514 {
515 struct fire_irq_data *irq_data = _data;
516 unsigned long pbm_regs = irq_data->pbm_regs;
517 unsigned long imap, iclr;
518 unsigned long int_ctrlr;
519
520 ino &= 0x3f;
521
522 /* Now build the IRQ bucket. */
523 imap = fire_ino_to_imap(pbm_regs, ino);
524 iclr = fire_ino_to_iclr(pbm_regs, ino);
525
526 /* Set the interrupt controller number. */
527 int_ctrlr = 1 << 6;
528 upa_writeq(int_ctrlr, imap);
529
530 /* The interrupt map registers do not have an INO field
531 * like other chips do. They return zero in the INO
532 * field, and the interrupt controller number is controlled
533 * in bits 6 to 9. So in order for build_irq() to get
534 * the INO right we pass it in as part of the fixup
535 * which will get added to the map register zero value
536 * read by build_irq().
537 */
538 ino |= (irq_data->portid << 6);
539 ino -= int_ctrlr;
540 return build_irq(ino, iclr, imap);
541 }
542
fire_irq_trans_init(struct device_node * dp)543 static void __init fire_irq_trans_init(struct device_node *dp)
544 {
545 const struct linux_prom64_registers *regs;
546 struct fire_irq_data *irq_data;
547
548 dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
549 dp->irq_trans->irq_build = fire_irq_build;
550
551 irq_data = prom_early_alloc(sizeof(struct fire_irq_data));
552
553 regs = of_get_property(dp, "reg", NULL);
554 dp->irq_trans->data = irq_data;
555
556 irq_data->pbm_regs = regs[0].phys_addr;
557 irq_data->portid = of_getintprop_default(dp, "portid", 0);
558 }
559 #endif /* CONFIG_PCI */
560
561 #ifdef CONFIG_SBUS
562 /* INO number to IMAP register offset for SYSIO external IRQ's.
563 * This should conform to both Sunfire/Wildfire server and Fusion
564 * desktop designs.
565 */
566 #define SYSIO_IMAP_SLOT0 0x2c00UL
567 #define SYSIO_IMAP_SLOT1 0x2c08UL
568 #define SYSIO_IMAP_SLOT2 0x2c10UL
569 #define SYSIO_IMAP_SLOT3 0x2c18UL
570 #define SYSIO_IMAP_SCSI 0x3000UL
571 #define SYSIO_IMAP_ETH 0x3008UL
572 #define SYSIO_IMAP_BPP 0x3010UL
573 #define SYSIO_IMAP_AUDIO 0x3018UL
574 #define SYSIO_IMAP_PFAIL 0x3020UL
575 #define SYSIO_IMAP_KMS 0x3028UL
576 #define SYSIO_IMAP_FLPY 0x3030UL
577 #define SYSIO_IMAP_SHW 0x3038UL
578 #define SYSIO_IMAP_KBD 0x3040UL
579 #define SYSIO_IMAP_MS 0x3048UL
580 #define SYSIO_IMAP_SER 0x3050UL
581 #define SYSIO_IMAP_TIM0 0x3060UL
582 #define SYSIO_IMAP_TIM1 0x3068UL
583 #define SYSIO_IMAP_UE 0x3070UL
584 #define SYSIO_IMAP_CE 0x3078UL
585 #define SYSIO_IMAP_SBERR 0x3080UL
586 #define SYSIO_IMAP_PMGMT 0x3088UL
587 #define SYSIO_IMAP_GFX 0x3090UL
588 #define SYSIO_IMAP_EUPA 0x3098UL
589
590 #define bogon ((unsigned long) -1)
591 static unsigned long sysio_irq_offsets[] = {
592 /* SBUS Slot 0 --> 3, level 1 --> 7 */
593 SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
594 SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
595 SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
596 SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
597 SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
598 SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
599 SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
600 SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
601
602 /* Onboard devices (not relevant/used on SunFire). */
603 SYSIO_IMAP_SCSI,
604 SYSIO_IMAP_ETH,
605 SYSIO_IMAP_BPP,
606 bogon,
607 SYSIO_IMAP_AUDIO,
608 SYSIO_IMAP_PFAIL,
609 bogon,
610 bogon,
611 SYSIO_IMAP_KMS,
612 SYSIO_IMAP_FLPY,
613 SYSIO_IMAP_SHW,
614 SYSIO_IMAP_KBD,
615 SYSIO_IMAP_MS,
616 SYSIO_IMAP_SER,
617 bogon,
618 bogon,
619 SYSIO_IMAP_TIM0,
620 SYSIO_IMAP_TIM1,
621 bogon,
622 bogon,
623 SYSIO_IMAP_UE,
624 SYSIO_IMAP_CE,
625 SYSIO_IMAP_SBERR,
626 SYSIO_IMAP_PMGMT,
627 SYSIO_IMAP_GFX,
628 SYSIO_IMAP_EUPA,
629 };
630
631 #undef bogon
632
633 #define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets)
634
635 /* Convert Interrupt Mapping register pointer to associated
636 * Interrupt Clear register pointer, SYSIO specific version.
637 */
638 #define SYSIO_ICLR_UNUSED0 0x3400UL
639 #define SYSIO_ICLR_SLOT0 0x3408UL
640 #define SYSIO_ICLR_SLOT1 0x3448UL
641 #define SYSIO_ICLR_SLOT2 0x3488UL
642 #define SYSIO_ICLR_SLOT3 0x34c8UL
sysio_imap_to_iclr(unsigned long imap)643 static unsigned long sysio_imap_to_iclr(unsigned long imap)
644 {
645 unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0;
646 return imap + diff;
647 }
648
sbus_of_build_irq(struct device_node * dp,unsigned int ino,void * _data)649 static unsigned int sbus_of_build_irq(struct device_node *dp,
650 unsigned int ino,
651 void *_data)
652 {
653 unsigned long reg_base = (unsigned long) _data;
654 const struct linux_prom_registers *regs;
655 unsigned long imap, iclr;
656 int sbus_slot = 0;
657 int sbus_level = 0;
658
659 ino &= 0x3f;
660
661 regs = of_get_property(dp, "reg", NULL);
662 if (regs)
663 sbus_slot = regs->which_io;
664
665 if (ino < 0x20)
666 ino += (sbus_slot * 8);
667
668 imap = sysio_irq_offsets[ino];
669 if (imap == ((unsigned long)-1)) {
670 prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n",
671 ino);
672 prom_halt();
673 }
674 imap += reg_base;
675
676 /* SYSIO inconsistency. For external SLOTS, we have to select
677 * the right ICLR register based upon the lower SBUS irq level
678 * bits.
679 */
680 if (ino >= 0x20) {
681 iclr = sysio_imap_to_iclr(imap);
682 } else {
683 sbus_level = ino & 0x7;
684
685 switch(sbus_slot) {
686 case 0:
687 iclr = reg_base + SYSIO_ICLR_SLOT0;
688 break;
689 case 1:
690 iclr = reg_base + SYSIO_ICLR_SLOT1;
691 break;
692 case 2:
693 iclr = reg_base + SYSIO_ICLR_SLOT2;
694 break;
695 default:
696 case 3:
697 iclr = reg_base + SYSIO_ICLR_SLOT3;
698 break;
699 }
700
701 iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
702 }
703 return build_irq(sbus_level, iclr, imap);
704 }
705
sbus_irq_trans_init(struct device_node * dp)706 static void __init sbus_irq_trans_init(struct device_node *dp)
707 {
708 const struct linux_prom64_registers *regs;
709
710 dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
711 dp->irq_trans->irq_build = sbus_of_build_irq;
712
713 regs = of_get_property(dp, "reg", NULL);
714 dp->irq_trans->data = (void *) (unsigned long) regs->phys_addr;
715 }
716 #endif /* CONFIG_SBUS */
717
718
central_build_irq(struct device_node * dp,unsigned int ino,void * _data)719 static unsigned int central_build_irq(struct device_node *dp,
720 unsigned int ino,
721 void *_data)
722 {
723 struct device_node *central_dp = _data;
724 struct platform_device *central_op = of_find_device_by_node(central_dp);
725 struct resource *res;
726 unsigned long imap, iclr;
727 u32 tmp;
728
729 if (of_node_name_eq(dp, "eeprom")) {
730 res = ¢ral_op->resource[5];
731 } else if (of_node_name_eq(dp, "zs")) {
732 res = ¢ral_op->resource[4];
733 } else if (of_node_name_eq(dp, "clock-board")) {
734 res = ¢ral_op->resource[3];
735 } else {
736 return ino;
737 }
738
739 imap = res->start + 0x00UL;
740 iclr = res->start + 0x10UL;
741
742 /* Set the INO state to idle, and disable. */
743 upa_writel(0, iclr);
744 upa_readl(iclr);
745
746 tmp = upa_readl(imap);
747 tmp &= ~0x80000000;
748 upa_writel(tmp, imap);
749
750 return build_irq(0, iclr, imap);
751 }
752
central_irq_trans_init(struct device_node * dp)753 static void __init central_irq_trans_init(struct device_node *dp)
754 {
755 dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
756 dp->irq_trans->irq_build = central_build_irq;
757
758 dp->irq_trans->data = dp;
759 }
760
761 struct irq_trans {
762 const char *name;
763 void (*init)(struct device_node *);
764 };
765
766 #ifdef CONFIG_PCI
767 static struct irq_trans __initdata pci_irq_trans_table[] = {
768 { "SUNW,sabre", sabre_irq_trans_init },
769 { "pci108e,a000", sabre_irq_trans_init },
770 { "pci108e,a001", sabre_irq_trans_init },
771 { "SUNW,psycho", psycho_irq_trans_init },
772 { "pci108e,8000", psycho_irq_trans_init },
773 { "SUNW,schizo", schizo_irq_trans_init },
774 { "pci108e,8001", schizo_irq_trans_init },
775 { "SUNW,schizo+", schizo_irq_trans_init },
776 { "pci108e,8002", schizo_irq_trans_init },
777 { "SUNW,tomatillo", tomatillo_irq_trans_init },
778 { "pci108e,a801", tomatillo_irq_trans_init },
779 { "SUNW,sun4v-pci", pci_sun4v_irq_trans_init },
780 { "pciex108e,80f0", fire_irq_trans_init },
781 };
782 #endif
783
sun4v_vdev_irq_build(struct device_node * dp,unsigned int devino,void * _data)784 static unsigned int sun4v_vdev_irq_build(struct device_node *dp,
785 unsigned int devino,
786 void *_data)
787 {
788 u32 devhandle = (u32) (unsigned long) _data;
789
790 return sun4v_build_irq(devhandle, devino);
791 }
792
sun4v_vdev_irq_trans_init(struct device_node * dp)793 static void __init sun4v_vdev_irq_trans_init(struct device_node *dp)
794 {
795 const struct linux_prom64_registers *regs;
796
797 dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
798 dp->irq_trans->irq_build = sun4v_vdev_irq_build;
799
800 regs = of_get_property(dp, "reg", NULL);
801 dp->irq_trans->data = (void *) (unsigned long)
802 ((regs->phys_addr >> 32UL) & 0x0fffffff);
803 }
804
irq_trans_init(struct device_node * dp)805 void __init irq_trans_init(struct device_node *dp)
806 {
807 #ifdef CONFIG_PCI
808 const char *model;
809 int i;
810 #endif
811
812 #ifdef CONFIG_PCI
813 model = of_get_property(dp, "model", NULL);
814 if (!model)
815 model = of_get_property(dp, "compatible", NULL);
816 if (model) {
817 for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) {
818 struct irq_trans *t = &pci_irq_trans_table[i];
819
820 if (!strcmp(model, t->name)) {
821 t->init(dp);
822 return;
823 }
824 }
825 }
826 #endif
827 #ifdef CONFIG_SBUS
828 if (of_node_name_eq(dp, "sbus") ||
829 of_node_name_eq(dp, "sbi")) {
830 sbus_irq_trans_init(dp);
831 return;
832 }
833 #endif
834 if (of_node_name_eq(dp, "fhc") &&
835 of_node_name_eq(dp->parent, "central")) {
836 central_irq_trans_init(dp);
837 return;
838 }
839 if (of_node_name_eq(dp, "virtual-devices") ||
840 of_node_name_eq(dp, "niu")) {
841 sun4v_vdev_irq_trans_init(dp);
842 return;
843 }
844 }
845