xref: /linux/arch/powerpc/boot/dts/mpc8377_wlan.dts (revision 75bf465f0bc33e9b776a46d6a1b9b990f5fb7c37) 
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8377E WLAN Device Tree Source
4 *
5 * Copyright 2007-2009 Freescale Semiconductor Inc.
6 * Copyright 2009 MontaVista Software, Inc.
7 */
8
9/dts-v1/;
10
11/ {
12	compatible = "fsl,mpc8377wlan";
13	#address-cells = <1>;
14	#size-cells = <1>;
15
16	aliases {
17		ethernet0 = &enet0;
18		ethernet1 = &enet1;
19		serial0 = &serial0;
20		serial1 = &serial1;
21		pci0 = &pci0;
22		pci1 = &pci1;
23		pci2 = &pci2;
24	};
25
26	cpus {
27		#address-cells = <1>;
28		#size-cells = <0>;
29
30		PowerPC,8377@0 {
31			device_type = "cpu";
32			reg = <0x0>;
33			d-cache-line-size = <32>;
34			i-cache-line-size = <32>;
35			d-cache-size = <32768>;
36			i-cache-size = <32768>;
37			timebase-frequency = <0>;
38			bus-frequency = <0>;
39			clock-frequency = <0>;
40		};
41	};
42
43	memory {
44		device_type = "memory";
45		reg = <0x00000000 0x20000000>;	// 512MB at 0
46	};
47
48	localbus@e0005000 {
49		#address-cells = <2>;
50		#size-cells = <1>;
51		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
52		reg = <0xe0005000 0x1000>;
53		interrupts = <77 0x8>;
54		interrupt-parent = <&ipic>;
55		ranges = <0x0 0x0 0xfc000000 0x04000000>;
56
57		flash@0,0 {
58			#address-cells = <1>;
59			#size-cells = <1>;
60			compatible = "cfi-flash";
61			reg = <0x0 0x0 0x4000000>;
62			bank-width = <2>;
63			device-width = <1>;
64
65			partition@0 {
66				reg = <0 0x80000>;
67				label = "u-boot";
68				read-only;
69			};
70
71			partition@a0000 {
72				reg = <0xa0000 0x300000>;
73				label = "kernel";
74			};
75
76			partition@3a0000 {
77				reg = <0x3a0000 0x3c60000>;
78				label = "rootfs";
79			};
80		};
81	};
82
83	immr@e0000000 {
84		#address-cells = <1>;
85		#size-cells = <1>;
86		device_type = "soc";
87		compatible = "simple-bus";
88		ranges = <0x0 0xe0000000 0x00100000>;
89		reg = <0xe0000000 0x00000200>;
90		bus-frequency = <0>;
91
92		wdt@200 {
93			device_type = "watchdog";
94			compatible = "mpc83xx_wdt";
95			reg = <0x200 0x100>;
96		};
97
98		gpio1: gpio-controller@c00 {
99			#gpio-cells = <2>;
100			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
101			reg = <0xc00 0x100>;
102			interrupts = <74 0x8>;
103			interrupt-parent = <&ipic>;
104			gpio-controller;
105		};
106
107		gpio2: gpio-controller@d00 {
108			#gpio-cells = <2>;
109			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
110			reg = <0xd00 0x100>;
111			interrupts = <75 0x8>;
112			interrupt-parent = <&ipic>;
113			gpio-controller;
114		};
115
116		sleep-nexus {
117			#address-cells = <1>;
118			#size-cells = <1>;
119			compatible = "simple-bus";
120			sleep = <&pmc 0x0c000000>;
121			ranges;
122
123			i2c@3000 {
124				#address-cells = <1>;
125				#size-cells = <0>;
126				cell-index = <0>;
127				compatible = "fsl-i2c";
128				reg = <0x3000 0x100>;
129				interrupts = <14 0x8>;
130				interrupt-parent = <&ipic>;
131				dfsrr;
132
133				at24@50 {
134					compatible = "atmel,24c256";
135					reg = <0x50>;
136				};
137
138				rtc@68 {
139					compatible = "dallas,ds1339";
140					reg = <0x68>;
141				};
142			};
143
144			sdhci@2e000 {
145				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
146				reg = <0x2e000 0x1000>;
147				interrupts = <42 0x8>;
148				interrupt-parent = <&ipic>;
149				sdhci,wp-inverted;
150				clock-frequency = <133333333>;
151			};
152		};
153
154		i2c@3100 {
155			#address-cells = <1>;
156			#size-cells = <0>;
157			cell-index = <1>;
158			compatible = "fsl-i2c";
159			reg = <0x3100 0x100>;
160			interrupts = <15 0x8>;
161			interrupt-parent = <&ipic>;
162			dfsrr;
163		};
164
165		spi@7000 {
166			cell-index = <0>;
167			compatible = "fsl,spi";
168			reg = <0x7000 0x1000>;
169			interrupts = <16 0x8>;
170			interrupt-parent = <&ipic>;
171			mode = "cpu";
172		};
173
174		dma@82a8 {
175			#address-cells = <1>;
176			#size-cells = <1>;
177			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
178			reg = <0x82a8 4>;
179			ranges = <0 0x8100 0x1a8>;
180			interrupt-parent = <&ipic>;
181			interrupts = <71 8>;
182			cell-index = <0>;
183			dma-channel@0 {
184				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
185				reg = <0 0x80>;
186				cell-index = <0>;
187				interrupt-parent = <&ipic>;
188				interrupts = <71 8>;
189			};
190			dma-channel@80 {
191				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
192				reg = <0x80 0x80>;
193				cell-index = <1>;
194				interrupt-parent = <&ipic>;
195				interrupts = <71 8>;
196			};
197			dma-channel@100 {
198				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
199				reg = <0x100 0x80>;
200				cell-index = <2>;
201				interrupt-parent = <&ipic>;
202				interrupts = <71 8>;
203			};
204			dma-channel@180 {
205				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
206				reg = <0x180 0x28>;
207				cell-index = <3>;
208				interrupt-parent = <&ipic>;
209				interrupts = <71 8>;
210			};
211		};
212
213		usb@23000 {
214			compatible = "fsl-usb2-dr";
215			reg = <0x23000 0x1000>;
216			#address-cells = <1>;
217			#size-cells = <0>;
218			interrupt-parent = <&ipic>;
219			interrupts = <38 0x8>;
220			phy_type = "ulpi";
221			sleep = <&pmc 0x00c00000>;
222		};
223
224		enet0: ethernet@24000 {
225			#address-cells = <1>;
226			#size-cells = <1>;
227			cell-index = <0>;
228			device_type = "network";
229			model = "eTSEC";
230			compatible = "gianfar";
231			reg = <0x24000 0x1000>;
232			ranges = <0x0 0x24000 0x1000>;
233			local-mac-address = [ 00 00 00 00 00 00 ];
234			interrupts = <32 0x8 33 0x8 34 0x8>;
235			phy-connection-type = "mii";
236			interrupt-parent = <&ipic>;
237			tbi-handle = <&tbi0>;
238			phy-handle = <&phy2>;
239			sleep = <&pmc 0xc0000000>;
240			fsl,magic-packet;
241
242			mdio@520 {
243				#address-cells = <1>;
244				#size-cells = <0>;
245				compatible = "fsl,gianfar-mdio";
246				reg = <0x520 0x20>;
247
248				phy2: ethernet-phy@2 {
249					interrupt-parent = <&ipic>;
250					interrupts = <17 0x8>;
251					reg = <0x2>;
252				};
253
254				phy3: ethernet-phy@3 {
255					interrupt-parent = <&ipic>;
256					interrupts = <18 0x8>;
257					reg = <0x3>;
258				};
259
260				tbi0: tbi-phy@11 {
261					reg = <0x11>;
262					device_type = "tbi-phy";
263				};
264			};
265		};
266
267		enet1: ethernet@25000 {
268			#address-cells = <1>;
269			#size-cells = <1>;
270			cell-index = <1>;
271			device_type = "network";
272			model = "eTSEC";
273			compatible = "gianfar";
274			reg = <0x25000 0x1000>;
275			ranges = <0x0 0x25000 0x1000>;
276			local-mac-address = [ 00 00 00 00 00 00 ];
277			interrupts = <35 0x8 36 0x8 37 0x8>;
278			phy-connection-type = "mii";
279			interrupt-parent = <&ipic>;
280			phy-handle = <&phy3>;
281			tbi-handle = <&tbi1>;
282			sleep = <&pmc 0x30000000>;
283			fsl,magic-packet;
284
285			mdio@520 {
286				#address-cells = <1>;
287				#size-cells = <0>;
288				compatible = "fsl,gianfar-tbi";
289				reg = <0x520 0x20>;
290
291				tbi1: tbi-phy@11 {
292					reg = <0x11>;
293					device_type = "tbi-phy";
294				};
295			};
296		};
297
298		serial0: serial@4500 {
299			cell-index = <0>;
300			device_type = "serial";
301			compatible = "fsl,ns16550", "ns16550";
302			reg = <0x4500 0x100>;
303			clock-frequency = <0>;
304			interrupts = <9 0x8>;
305			interrupt-parent = <&ipic>;
306		};
307
308		serial1: serial@4600 {
309			cell-index = <1>;
310			device_type = "serial";
311			compatible = "fsl,ns16550", "ns16550";
312			reg = <0x4600 0x100>;
313			clock-frequency = <0>;
314			interrupts = <10 0x8>;
315			interrupt-parent = <&ipic>;
316		};
317
318		crypto@30000 {
319			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
320				     "fsl,sec2.1", "fsl,sec2.0";
321			reg = <0x30000 0x10000>;
322			interrupts = <11 0x8>;
323			interrupt-parent = <&ipic>;
324			fsl,num-channels = <4>;
325			fsl,channel-fifo-len = <24>;
326			fsl,exec-units-mask = <0x9fe>;
327			fsl,descriptor-types-mask = <0x3ab0ebf>;
328			sleep = <&pmc 0x03000000>;
329		};
330
331		sata@18000 {
332			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
333			reg = <0x18000 0x1000>;
334			interrupts = <44 0x8>;
335			interrupt-parent = <&ipic>;
336			sleep = <&pmc 0x000000c0>;
337		};
338
339		sata@19000 {
340			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
341			reg = <0x19000 0x1000>;
342			interrupts = <45 0x8>;
343			interrupt-parent = <&ipic>;
344			sleep = <&pmc 0x00000030>;
345		};
346
347		/* IPIC
348		 * interrupts cell = <intr #, sense>
349		 * sense values match linux IORESOURCE_IRQ_* defines:
350		 * sense == 8: Level, low assertion
351		 * sense == 2: Edge, high-to-low change
352		 */
353		ipic: interrupt-controller@700 {
354			compatible = "fsl,ipic";
355			interrupt-controller;
356			#address-cells = <0>;
357			#interrupt-cells = <2>;
358			reg = <0x700 0x100>;
359		};
360
361		pmc: power@b00 {
362			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
363			reg = <0xb00 0x100 0xa00 0x100>;
364			interrupts = <80 0x8>;
365			interrupt-parent = <&ipic>;
366		};
367	};
368
369	pci0: pci@e0008500 {
370		interrupt-map-mask = <0xf800 0 0 7>;
371		interrupt-map = <
372				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
373
374				/* IDSEL AD14 IRQ6 inta */
375				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
376
377				/* IDSEL AD15 IRQ5 inta */
378				 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
379		interrupt-parent = <&ipic>;
380		interrupts = <66 0x8>;
381		bus-range = <0 0>;
382		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
383		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
384		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
385		sleep = <&pmc 0x00010000>;
386		clock-frequency = <66666666>;
387		#interrupt-cells = <1>;
388		#size-cells = <2>;
389		#address-cells = <3>;
390		reg = <0xe0008500 0x100		/* internal registers */
391		       0xe0008300 0x8>;		/* config space access registers */
392		compatible = "fsl,mpc8349-pci";
393		device_type = "pci";
394	};
395
396	pci1: pcie@e0009000 {
397		#address-cells = <3>;
398		#size-cells = <2>;
399		#interrupt-cells = <1>;
400		device_type = "pci";
401		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
402		reg = <0xe0009000 0x00001000>;
403		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
404		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
405		bus-range = <0 255>;
406		interrupt-map-mask = <0xf800 0 0 7>;
407		interrupt-map = <0 0 0 1 &ipic 1 8
408				 0 0 0 2 &ipic 1 8
409				 0 0 0 3 &ipic 1 8
410				 0 0 0 4 &ipic 1 8>;
411		sleep = <&pmc 0x00300000>;
412		clock-frequency = <0>;
413
414		pcie@0 {
415			#address-cells = <3>;
416			#size-cells = <2>;
417			device_type = "pci";
418			reg = <0 0 0 0 0>;
419			ranges = <0x02000000 0 0xa8000000
420				  0x02000000 0 0xa8000000
421				  0 0x10000000
422				  0x01000000 0 0x00000000
423				  0x01000000 0 0x00000000
424				  0 0x00800000>;
425		};
426	};
427
428	pci2: pcie@e000a000 {
429		#address-cells = <3>;
430		#size-cells = <2>;
431		#interrupt-cells = <1>;
432		device_type = "pci";
433		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
434		reg = <0xe000a000 0x00001000>;
435		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
436			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
437		bus-range = <0 255>;
438		interrupt-map-mask = <0xf800 0 0 7>;
439		interrupt-map = <0 0 0 1 &ipic 2 8
440				 0 0 0 2 &ipic 2 8
441				 0 0 0 3 &ipic 2 8
442				 0 0 0 4 &ipic 2 8>;
443		sleep = <&pmc 0x000c0000>;
444		clock-frequency = <0>;
445
446		pcie@0 {
447			#address-cells = <3>;
448			#size-cells = <2>;
449			device_type = "pci";
450			reg = <0 0 0 0 0>;
451			ranges = <0x02000000 0 0xc8000000
452				  0x02000000 0 0xc8000000
453				  0 0x10000000
454				  0x01000000 0 0x00000000
455				  0x01000000 0 0x00000000
456				  0 0x00800000>;
457		};
458	};
459};
460