xref: /linux/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi (revision 3f41368fbfe1b3d5922d317fe1a0a0cab6846802)
1// SPDX-License-Identifier: GPL-2.0-only OR MIT
2/*
3 * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals
4 *
5 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8&cbass_wakeup {
9	wkup_conf: syscon@43000000 {
10		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
11		reg = <0x00 0x43000000 0x00 0x20000>;
12		#address-cells = <1>;
13		#size-cells = <1>;
14		ranges = <0x00 0x00 0x43000000 0x20000>;
15
16		chipid: chipid@14 {
17			compatible = "ti,am654-chipid";
18			reg = <0x14 0x4>;
19		};
20
21		usb0_phy_ctrl: syscon@4008 {
22			compatible = "ti,am62-usb-phy-ctrl", "syscon";
23			reg = <0x4008 0x4>;
24		};
25
26		usb1_phy_ctrl: syscon@4018 {
27			compatible = "ti,am62-usb-phy-ctrl", "syscon";
28			reg = <0x4018 0x4>;
29		};
30	};
31
32	wkup_uart0: serial@2b300000 {
33		compatible = "ti,am64-uart", "ti,am654-uart";
34		reg = <0x00 0x2b300000 0x00 0x100>;
35		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
36		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
37		clocks = <&k3_clks 114 0>;
38		clock-names = "fclk";
39		status = "disabled";
40	};
41
42	wkup_i2c0: i2c@2b200000 {
43		compatible = "ti,am64-i2c", "ti,omap4-i2c";
44		reg = <0x00 0x2b200000 0x00 0x100>;
45		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
46		#address-cells = <1>;
47		#size-cells = <0>;
48		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
49		clocks = <&k3_clks 107 4>;
50		clock-names = "fck";
51		status = "disabled";
52	};
53
54	wkup_rtc0: rtc@2b1f0000 {
55		compatible = "ti,am62-rtc";
56		reg = <0x00 0x2b1f0000 0x00 0x100>;
57		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
58		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
59		clock-names = "vbus", "osc32k";
60		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
61		wakeup-source;
62		status = "disabled";
63	};
64
65	wkup_rti0: watchdog@2b000000 {
66		compatible = "ti,j7-rti-wdt";
67		reg = <0x00 0x2b000000 0x00 0x100>;
68		clocks = <&k3_clks 132 0>;
69		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
70		assigned-clocks = <&k3_clks 132 0>;
71		assigned-clock-parents = <&k3_clks 132 2>;
72		/* Used by DM firmware */
73		status = "reserved";
74	};
75
76	wkup_vtm0: temperature-sensor@b00000 {
77		compatible = "ti,j7200-vtm";
78		reg = <0x00 0xb00000 0x00 0x400>,
79		      <0x00 0xb01000 0x00 0x400>;
80		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
81		#thermal-sensor-cells = <1>;
82	};
83};
84