xref: /linux/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1// SPDX-License-Identifier: GPL-2.0-only OR MIT
2/*
3 * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals
4 *
5 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8&cbass_wakeup {
9	wkup_conf: bus@43000000 {
10		compatible = "simple-bus";
11		#address-cells = <1>;
12		#size-cells = <1>;
13		ranges = <0x00 0x00 0x43000000 0x20000>;
14
15		chipid: chipid@14 {
16			compatible = "ti,am654-chipid";
17			reg = <0x14 0x4>;
18		};
19
20		cpsw_mac_syscon: ethernet-mac-syscon@200 {
21			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
22			reg = <0x200 0x8>;
23		};
24
25		usb0_phy_ctrl: syscon@4008 {
26			compatible = "ti,am62-usb-phy-ctrl", "syscon";
27			reg = <0x4008 0x4>;
28		};
29
30		usb1_phy_ctrl: syscon@4018 {
31			compatible = "ti,am62-usb-phy-ctrl", "syscon";
32			reg = <0x4018 0x4>;
33		};
34	};
35
36	wkup_uart0: serial@2b300000 {
37		compatible = "ti,am64-uart", "ti,am654-uart";
38		reg = <0x00 0x2b300000 0x00 0x100>;
39		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
40		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
41		clocks = <&k3_clks 114 0>;
42		clock-names = "fclk";
43		status = "disabled";
44	};
45
46	wkup_i2c0: i2c@2b200000 {
47		compatible = "ti,am64-i2c", "ti,omap4-i2c";
48		reg = <0x00 0x2b200000 0x00 0x100>;
49		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
50		#address-cells = <1>;
51		#size-cells = <0>;
52		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
53		clocks = <&k3_clks 107 4>;
54		clock-names = "fck";
55		status = "disabled";
56	};
57
58	wkup_rtc0: rtc@2b1f0000 {
59		compatible = "ti,am62-rtc";
60		reg = <0x00 0x2b1f0000 0x00 0x100>;
61		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
62		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
63		clock-names = "vbus", "osc32k";
64		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
65		wakeup-source;
66	};
67
68	wkup_rti0: watchdog@2b000000 {
69		compatible = "ti,j7-rti-wdt";
70		reg = <0x00 0x2b000000 0x00 0x100>;
71		clocks = <&k3_clks 132 0>;
72		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
73		assigned-clocks = <&k3_clks 132 0>;
74		assigned-clock-parents = <&k3_clks 132 2>;
75		/* Used by DM firmware */
76		status = "reserved";
77	};
78
79	wkup_vtm0: temperature-sensor@b00000 {
80		compatible = "ti,j7200-vtm";
81		reg = <0x00 0xb00000 0x00 0x400>,
82		      <0x00 0xb01000 0x00 0x400>;
83		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
84		#thermal-sensor-cells = <1>;
85	};
86};
87