1// SPDX-License-Identifier: GPL-2.0-only 2 3/dts-v1/; 4 5#include "msm8916-samsung-a2015-common.dtsi" 6 7/ { 8 model = "Samsung Galaxy A3U (EUR)"; 9 compatible = "samsung,a3u-eur", "qcom,msm8916"; 10 chassis-type = "handset"; 11 12 reg_panel_vdd3: regulator-panel-vdd3 { 13 compatible = "regulator-fixed"; 14 regulator-name = "panel_vdd3"; 15 regulator-min-microvolt = <1800000>; 16 regulator-max-microvolt = <1800000>; 17 18 gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; 19 enable-active-high; 20 21 pinctrl-names = "default"; 22 pinctrl-0 = <&panel_vdd3_default>; 23 }; 24 25 reg_touch_key: regulator-touch-key { 26 compatible = "regulator-fixed"; 27 regulator-name = "touch_key"; 28 regulator-min-microvolt = <2800000>; 29 regulator-max-microvolt = <2800000>; 30 31 gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; 32 enable-active-high; 33 34 pinctrl-names = "default"; 35 pinctrl-0 = <&tkey_en_default>; 36 }; 37 38 reg_key_led: regulator-key-led { 39 compatible = "regulator-fixed"; 40 regulator-name = "key_led"; 41 regulator-min-microvolt = <3300000>; 42 regulator-max-microvolt = <3300000>; 43 44 gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; 45 enable-active-high; 46 47 pinctrl-names = "default"; 48 pinctrl-0 = <&tkey_led_en_default>; 49 }; 50}; 51 52&accelerometer { 53 mount-matrix = "0", "1", "0", 54 "1", "0", "0", 55 "0", "0", "1"; 56}; 57 58&battery { 59 charge-term-current-microamp = <150000>; 60 constant-charge-current-max-microamp = <1000000>; 61 constant-charge-voltage-max-microvolt = <4350000>; 62}; 63 64&blsp_i2c5 { 65 status = "okay"; 66 67 touchscreen@20 { 68 compatible = "zinitix,bt541"; 69 70 reg = <0x20>; 71 interrupt-parent = <&tlmm>; 72 interrupts = <13 IRQ_TYPE_EDGE_FALLING>; 73 74 touchscreen-size-x = <540>; 75 touchscreen-size-y = <960>; 76 77 vcca-supply = <®_vdd_tsp_a>; 78 vdd-supply = <&pm8916_l6>; 79 80 pinctrl-names = "default"; 81 pinctrl-0 = <&ts_int_default>; 82 }; 83}; 84 85&clk_pwm { 86 status = "okay"; 87}; 88 89&mdss_dsi0 { 90 panel@0 { 91 reg = <0>; 92 93 compatible = "samsung,s6e88a0-ams452ef01"; 94 95 vdd3-supply = <®_panel_vdd3>; 96 vci-supply = <&pm8916_l17>; 97 reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; 98 99 port { 100 panel_in: endpoint { 101 remote-endpoint = <&mdss_dsi0_out>; 102 }; 103 }; 104 }; 105}; 106 107&mdss_dsi0_out { 108 data-lanes = <0 1>; 109 remote-endpoint = <&panel_in>; 110}; 111 112&touchkey { 113 vcc-supply = <®_touch_key>; 114 vdd-supply = <®_key_led>; 115}; 116 117&vibrator { 118 status = "okay"; 119}; 120 121&wcnss { 122 status = "okay"; 123}; 124 125&wcnss_iris { 126 compatible = "qcom,wcn3620"; 127}; 128 129&wcnss_mem { 130 status = "okay"; 131}; 132 133&tlmm { 134 panel_vdd3_default: panel-vdd3-default-state { 135 pins = "gpio9"; 136 function = "gpio"; 137 138 drive-strength = <2>; 139 bias-disable; 140 }; 141 142 tkey_en_default: tkey-en-default-state { 143 pins = "gpio86"; 144 function = "gpio"; 145 146 drive-strength = <2>; 147 bias-disable; 148 }; 149 150 tkey_led_en_default: tkey-led-en-default-state { 151 pins = "gpio60"; 152 function = "gpio"; 153 154 drive-strength = <2>; 155 bias-disable; 156 }; 157}; 158