xref: /linux/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2018-2020 Purism SPC
4 */
5
6/dts-v1/;
7
8#include "dt-bindings/input/input.h"
9#include <dt-bindings/interrupt-controller/irq.h>
10#include <dt-bindings/leds/common.h>
11#include "dt-bindings/pwm/pwm.h"
12#include "dt-bindings/usb/pd.h"
13#include "imx8mq.dtsi"
14
15/ {
16	model = "Purism Librem 5";
17	compatible = "purism,librem5", "fsl,imx8mq";
18	chassis-type = "handset";
19
20	backlight_dsi: backlight-dsi {
21		compatible = "led-backlight";
22		leds = <&led_backlight>;
23		brightness-levels = <255>;
24		default-brightness-level = <190>;
25	};
26
27	pmic_osc: clock-pmic {
28		compatible = "fixed-clock";
29		#clock-cells = <0>;
30		clock-frequency = <32768>;
31		clock-output-names = "pmic_osc";
32	};
33
34	chosen {
35		stdout-path = &uart1;
36	};
37
38	gpio-keys {
39		compatible = "gpio-keys";
40		pinctrl-names = "default";
41		pinctrl-0 = <&pinctrl_keys>;
42
43		key-vol-down {
44			label = "VOL_DOWN";
45			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
46			linux,code = <KEY_VOLUMEDOWN>;
47			debounce-interval = <50>;
48		};
49
50		key-vol-up {
51			label = "VOL_UP";
52			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
53			linux,code = <KEY_VOLUMEUP>;
54			debounce-interval = <50>;
55		};
56	};
57
58	led-controller {
59		compatible = "pwm-leds-multicolor";
60
61		multi-led {
62			color = <LED_COLOR_ID_RGB>;
63			function = LED_FUNCTION_STATUS;
64			max-brightness = <248>;
65
66			led-0 {
67				color = <LED_COLOR_ID_BLUE>;
68				pwms = <&pwm2 0 50000 0>;
69			};
70
71			led-1 {
72				color = <LED_COLOR_ID_GREEN>;
73				pwms = <&pwm4 0 50000 0>;
74			};
75
76			led-2 {
77				color = <LED_COLOR_ID_RED>;
78				pwms = <&pwm3 0 50000 0>;
79			};
80		};
81	};
82
83	reg_aud_1v8: regulator-audio-1v8 {
84		compatible = "regulator-fixed";
85		pinctrl-names = "default";
86		pinctrl-0 = <&pinctrl_audiopwr>;
87		regulator-name = "AUD_1V8";
88		regulator-min-microvolt = <1800000>;
89		regulator-max-microvolt = <1800000>;
90		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
91		enable-active-high;
92		regulator-always-on;
93	};
94
95	reg_mic_2v4: regulator-mic-2v4 {
96		compatible = "regulator-fixed";
97		regulator-name = "MIC_2V4";
98		regulator-min-microvolt = <2400000>;
99		regulator-max-microvolt = <2400000>;
100		vin-supply = <&reg_aud_1v8>;
101	};
102
103	/*
104	 * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
105	 * since we can't have it twice in the 2 different regulator nodes.
106	 */
107	reg_csi_1v8: regulator-csi-1v8 {
108		compatible = "regulator-fixed";
109		regulator-name = "CAMERA_VDDIO_1V8";
110		regulator-min-microvolt = <1800000>;
111		regulator-max-microvolt = <1800000>;
112		vin-supply = <&reg_vdd_3v3>;
113		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
114		enable-active-high;
115	};
116
117	/* controlled by the CAMERA_POWER_KEY HKS */
118	reg_vcam_1v2: regulator-vcam-1v2 {
119		compatible = "regulator-fixed";
120		regulator-name = "CAMERA_VDDD_1V2";
121		regulator-min-microvolt = <1200000>;
122		regulator-max-microvolt = <1200000>;
123		vin-supply = <&reg_vdd_1v8>;
124		enable-active-high;
125	};
126
127	reg_vcam_2v8: regulator-vcam-2v8 {
128		compatible = "regulator-fixed";
129		regulator-name = "CAMERA_VDDA_2V8";
130		regulator-min-microvolt = <2800000>;
131		regulator-max-microvolt = <2800000>;
132		vin-supply = <&reg_vdd_3v3>;
133		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
134		enable-active-high;
135	};
136
137	reg_gnss: regulator-gnss {
138		compatible = "regulator-fixed";
139		pinctrl-names = "default";
140		pinctrl-0 = <&pinctrl_gnsspwr>;
141		regulator-name = "GNSS";
142		regulator-min-microvolt = <3300000>;
143		regulator-max-microvolt = <3300000>;
144		gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
145		enable-active-high;
146	};
147
148	reg_hub: regulator-hub {
149		compatible = "regulator-fixed";
150		pinctrl-names = "default";
151		pinctrl-0 = <&pinctrl_hub_pwr>;
152		regulator-name = "HUB";
153		regulator-min-microvolt = <3300000>;
154		regulator-max-microvolt = <3300000>;
155		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
156		enable-active-high;
157	};
158
159	reg_lcd_1v8: regulator-lcd-1v8 {
160		compatible = "regulator-fixed";
161		pinctrl-names = "default";
162		pinctrl-0 = <&pinctrl_dsien>;
163		regulator-name = "LCD_1V8";
164		regulator-min-microvolt = <1800000>;
165		regulator-max-microvolt = <1800000>;
166		vin-supply = <&reg_vdd_1v8>;
167		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
168		enable-active-high;
169		/* Otherwise i2c3 is not functional */
170		regulator-always-on;
171	};
172
173	reg_lcd_3v4: regulator-lcd-3v4 {
174		compatible = "regulator-fixed";
175		regulator-name = "LCD_3V4";
176		pinctrl-names = "default";
177		pinctrl-0 = <&pinctrl_dsibiasen>;
178		vin-supply = <&reg_vsys_3v4>;
179		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
180		enable-active-high;
181	};
182
183	reg_vdd_sen: regulator-vdd-sen {
184		compatible = "regulator-fixed";
185		regulator-name = "VDD_SEN";
186		regulator-min-microvolt = <3300000>;
187		regulator-max-microvolt = <3300000>;
188	};
189
190	reg_vdd_1v8: regulator-vdd-1v8 {
191		compatible = "regulator-fixed";
192		regulator-name = "VDD_1V8";
193		regulator-min-microvolt = <1800000>;
194		regulator-max-microvolt = <1800000>;
195		vin-supply = <&buck7_reg>;
196	};
197
198	reg_vdd_3v3: regulator-vdd-3v3 {
199		compatible = "regulator-fixed";
200		regulator-name = "VDD_3V3";
201		regulator-min-microvolt = <3300000>;
202		regulator-max-microvolt = <3300000>;
203	};
204
205	reg_vsys_3v4: regulator-vsys-3v4 {
206		compatible = "regulator-fixed";
207		regulator-name = "VSYS_3V4";
208		regulator-min-microvolt = <3400000>;
209		regulator-max-microvolt = <3400000>;
210		regulator-always-on;
211	};
212
213	reg_wifi_3v3: regulator-wifi-3v3 {
214		compatible = "regulator-fixed";
215		pinctrl-names = "default";
216		pinctrl-0 = <&pinctrl_wifi_pwr>;
217		regulator-name = "3V3_WIFI";
218		regulator-min-microvolt = <3300000>;
219		regulator-max-microvolt = <3300000>;
220		gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>;
221		enable-active-high;
222		vin-supply = <&reg_vdd_3v3>;
223	};
224
225	sound {
226		compatible = "simple-audio-card";
227		pinctrl-names = "default";
228		pinctrl-0 = <&pinctrl_hp>;
229		simple-audio-card,name = "Librem 5";
230		simple-audio-card,format = "i2s";
231		simple-audio-card,widgets =
232			"Headphone", "Headphones",
233			"Microphone", "Headset Mic",
234			"Microphone", "Digital Mic",
235			"Speaker", "Speaker";
236		simple-audio-card,routing =
237			"Headphones", "HPOUTL",
238			"Headphones", "HPOUTR",
239			"Speaker", "SPKOUTL",
240			"Speaker", "SPKOUTR",
241			"Headset Mic", "MICBIAS",
242			"IN3R", "Headset Mic",
243			"DMICDAT", "Digital Mic";
244		simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
245
246		simple-audio-card,cpu {
247			sound-dai = <&sai2>;
248		};
249
250		simple-audio-card,codec {
251			sound-dai = <&codec>;
252			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
253			frame-master;
254			bitclock-master;
255		};
256	};
257
258	sound-wwan {
259		compatible = "simple-audio-card";
260		simple-audio-card,name = "Modem";
261		simple-audio-card,format = "i2s";
262
263		simple-audio-card,cpu {
264			sound-dai = <&sai6>;
265			frame-inversion;
266		};
267
268		simple-audio-card,codec {
269			sound-dai = <&bm818_codec>;
270			frame-master;
271			bitclock-master;
272		};
273	};
274
275	usdhc2_pwrseq: pwrseq {
276		pinctrl-names = "default";
277		pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>;
278		compatible = "mmc-pwrseq-simple";
279		reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>,
280			      <&gpio4 29 GPIO_ACTIVE_HIGH>;
281	};
282
283	bm818_codec: sound-wwan-codec {
284		compatible = "broadmobi,bm818", "option,gtm601";
285		#sound-dai-cells = <0>;
286	};
287
288	vibrator {
289		compatible = "pwm-vibrator";
290		pwms = <&pwm1 0 1000000000 0>;
291		pwm-names = "enable";
292		vcc-supply = <&reg_vdd_3v3>;
293	};
294};
295
296&A53_0 {
297	cpu-supply = <&buck2_reg>;
298};
299
300&A53_1 {
301	cpu-supply = <&buck2_reg>;
302};
303
304&A53_2 {
305	cpu-supply = <&buck2_reg>;
306};
307
308&A53_3 {
309	cpu-supply = <&buck2_reg>;
310};
311
312&csi1 {
313	status = "okay";
314};
315
316&ddrc {
317	operating-points-v2 = <&ddrc_opp_table>;
318	status = "okay";
319
320	ddrc_opp_table: opp-table {
321		compatible = "operating-points-v2";
322
323		opp-25000000 {
324			opp-hz = /bits/ 64 <25000000>;
325		};
326
327		opp-100000000 {
328			opp-hz = /bits/ 64 <100000000>;
329		};
330
331		opp-166000000 {
332			opp-hz = /bits/ 64 <166935483>;
333		};
334
335		opp-800000000 {
336			opp-hz = /bits/ 64 <800000000>;
337		};
338	};
339};
340
341&dphy {
342	status = "okay";
343};
344
345&ecspi1 {
346	pinctrl-names = "default";
347	pinctrl-0 = <&pinctrl_ecspi1>;
348	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
349	#address-cells = <1>;
350	#size-cells = <0>;
351	status = "okay";
352
353	nor_flash: flash@0 {
354		compatible = "jedec,spi-nor";
355		reg = <0>;
356		spi-max-frequency = <1000000>;
357		#address-cells = <1>;
358		#size-cells = <1>;
359
360		partition@0 {
361			label = "protected0";
362			reg = <0x0 0x30000>;
363			read-only;
364		};
365
366		partition@30000 {
367			label = "firmware";
368			reg = <0x30000 0x1d0000>;
369			read-only;
370		};
371	};
372};
373
374&gpio1 {
375	pinctrl-names = "default";
376	pinctrl-0 = <&pinctrl_pmic_5v>;
377
378	pmic-5v-hog {
379		gpio-hog;
380		gpios = <1 GPIO_ACTIVE_HIGH>;
381		input;
382		line-name = "pmic-5v";
383	};
384};
385
386&iomuxc {
387	pinctrl-names = "default";
388	pinctrl-0 = <&pinctrl_hog>;
389
390	pinctrl_hog: hoggrp {
391		fsl,pins = <
392			/* CLKO2 for cameras on both CSI1 and CSI2 */
393			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
394		>;
395	};
396
397	pinctrl_audiopwr: audiopwrgrp {
398		fsl,pins = <
399			/* AUDIO_POWER_EN_3V3 */
400			MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x83
401		>;
402	};
403
404	pinctrl_bl: blgrp {
405		fsl,pins = <
406			/* BACKLINGE_EN */
407			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14	0x83
408		>;
409	};
410
411	pinctrl_bt: btgrp {
412		fsl,pins = <
413			/* BT_REG_ON */
414			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x83
415		>;
416	};
417
418	pinctrl_camera_pwr: camerapwrgrp {
419		fsl,pins = <
420			/* CAMERA_PWR_EN_3V3 */
421			MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x83
422		>;
423	};
424
425	pinctrl_csi1: csi1grp {
426		fsl,pins = <
427			/* CSI1_NRST */
428			MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25	0x83
429		>;
430	};
431
432	pinctrl_charger_in: chargeringrp {
433		fsl,pins = <
434			/* CHRG_INT */
435			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3	0x80
436		>;
437	};
438
439	pinctrl_dsibiasen: dsibiasengrp {
440		fsl,pins = <
441			/* DSI_BIAS_EN */
442			MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20	0x83
443		>;
444	};
445
446	pinctrl_dsien: dsiengrp {
447		fsl,pins = <
448			/* DSI_EN_3V3 */
449			MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x83
450		>;
451	};
452
453	pinctrl_dsirst: dsirstgrp {
454		fsl,pins = <
455			/* DSI_RST */
456			MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29	0x83
457			/* DSI_TE */
458			MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28	0x83
459			/* TP_RST */
460			MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24	0x83
461		>;
462	};
463
464	pinctrl_ecspi1: ecspigrp {
465		fsl,pins = <
466			MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x83
467			MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x83
468			MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x19
469			MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x83
470		>;
471	};
472
473	pinctrl_gauge: gaugegrp {
474		fsl,pins = <
475			/* BAT_LOW */
476			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0x80
477		>;
478	};
479
480	pinctrl_gnsspwr: gnsspwrgrp {
481		fsl,pins = <
482			/* GPS3V3_EN */
483			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12	0x83
484		>;
485	};
486
487	pinctrl_haptic: hapticgrp {
488		fsl,pins = <
489			/* MOTO */
490			MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT	0x83
491		>;
492	};
493
494	pinctrl_hp: hpgrp {
495		fsl,pins = <
496			/* HEADPHONE_DET_1V8 */
497			MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9	0x180
498		>;
499	};
500
501	pinctrl_hub_pwr: hubpwrgrp {
502		fsl,pins = <
503			/* HUB_PWR_3V3_EN */
504			MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x83
505		>;
506	};
507
508	pinctrl_i2c1: i2c1grp {
509		fsl,pins = <
510			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x40000026
511			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x40000026
512		>;
513	};
514
515	pinctrl_i2c2: i2c2grp {
516		fsl,pins = <
517			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000026
518			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000026
519		>;
520	};
521
522	pinctrl_i2c3: i2c3grp {
523		fsl,pins = <
524			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000026
525			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000026
526		>;
527	};
528
529	pinctrl_i2c4: i2c4grp {
530		fsl,pins = <
531			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL		0x40000026
532			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA		0x40000026
533		>;
534	};
535
536	pinctrl_keys: keysgrp {
537		fsl,pins = <
538			/* VOL- */
539			MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17	0x01C0
540			/* VOL+ */
541			MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16	0x01C0
542		>;
543	};
544
545	pinctrl_led_b: ledbgrp {
546		fsl,pins = <
547			/* LED_B */
548			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x06
549		>;
550	};
551
552	pinctrl_led_g: ledggrp {
553		fsl,pins = <
554			/* LED_G */
555			MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT		0x06
556		>;
557	};
558
559	pinctrl_led_r: ledrgrp {
560		fsl,pins = <
561			/* LED_R */
562			MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT		0x06
563		>;
564	};
565
566	pinctrl_mag: maggrp {
567		fsl,pins = <
568			/* INT_MAG */
569			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x80
570		>;
571	};
572
573	pinctrl_pmic: pmicgrp {
574		fsl,pins = <
575			/* PMIC_NINT */
576			MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x80
577		>;
578	};
579
580	pinctrl_pmic_5v: pmic5vgrp {
581		fsl,pins = <
582			/* PMIC_5V */
583			MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x80
584		>;
585	};
586
587	pinctrl_prox: proxgrp {
588		fsl,pins = <
589			/* INT_LIGHT */
590			MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7	0x80
591		>;
592	};
593
594	pinctrl_rtc: rtcgrp {
595		fsl,pins = <
596			/* RTC_INT */
597			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x80
598		>;
599	};
600
601	pinctrl_sai2: sai2grp {
602		fsl,pins = <
603			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
604			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
605			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
606			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
607			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
608		>;
609	};
610
611	pinctrl_sai6: sai6grp {
612		fsl,pins = <
613			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
614			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
615			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK	0xd6
616			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
617		>;
618	};
619
620	pinctrl_tcpc: tcpcgrp {
621		fsl,pins = <
622			/* TCPC_INT */
623			MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x01C0
624		>;
625	};
626
627	pinctrl_touch: touchgrp {
628		fsl,pins = <
629			/* TP_INT */
630			MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27	0x80
631		>;
632	};
633
634	pinctrl_typec: typecgrp {
635		fsl,pins = <
636			/* TYPEC_MUX_EN */
637			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x83
638		>;
639	};
640
641	pinctrl_uart1: uart1grp {
642		fsl,pins = <
643			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX	0x49
644			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX	0x49
645		>;
646	};
647
648	pinctrl_uart2: uart2grp {
649		fsl,pins = <
650			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX	0x49
651			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX	0x49
652		>;
653	};
654
655	pinctrl_uart3: uart3grp {
656		fsl,pins = <
657			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX	0x49
658			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX	0x49
659		>;
660	};
661
662	pinctrl_uart4: uart4grp {
663		fsl,pins = <
664			MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x49
665			MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x49
666			MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x49
667			MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x49
668		>;
669	};
670
671	pinctrl_usdhc1: usdhc1grp {
672		fsl,pins = <
673			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
674			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
675			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
676			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
677			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
678			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
679			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
680			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
681			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
682			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
683			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
684			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
685		>;
686	};
687
688	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
689		fsl,pins = <
690			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
691			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
692			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
693			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
694			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
695			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
696			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
697			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
698			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
699			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
700			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
701			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
702		>;
703	};
704
705	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
706		fsl,pins = <
707			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
708			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
709			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
710			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
711			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
712			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
713			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
714			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
715			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
716			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
717			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
718			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
719		>;
720	};
721
722	pinctrl_usdhc2: usdhc2grp {
723		fsl,pins = <
724			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
725			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83
726			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3
727			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xc3
728			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xc3
729			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xc3
730			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xc3
731			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
732		>;
733	};
734
735	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
736		fsl,pins = <
737			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
738			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x8d
739			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcd
740			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcd
741			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcd
742			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcd
743			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcd
744			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
745		>;
746	};
747
748	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
749		fsl,pins = <
750			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
751			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f
752			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcf
753			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcf
754			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcf
755			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcf
756			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcf
757			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
758		>;
759	};
760
761	pinctrl_wifi_disable: wifidisablegrp {
762		fsl,pins = <
763			/* WIFI_REG_ON */
764			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29	0x83
765		>;
766	};
767
768	pinctrl_wifi_pwr: wifipwrgrp {
769		fsl,pins = <
770			/* WIFI3V3_EN */
771			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10	0x83
772		>;
773	};
774
775	pinctrl_wdog: wdoggrp {
776		fsl,pins = <
777			/* nWDOG */
778			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x1f
779		>;
780	};
781};
782
783&i2c1 {
784	clock-frequency = <384000>;
785	pinctrl-names = "default";
786	pinctrl-0 = <&pinctrl_i2c1>;
787	status = "okay";
788
789	typec_pd: usb-pd@3f {
790		compatible = "ti,tps6598x";
791		reg = <0x3f>;
792		pinctrl-names = "default";
793		pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>;
794		interrupt-parent = <&gpio1>;
795		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
796		interrupt-names = "irq";
797		extcon = <&usb3_phy0>;
798		wakeup-source;
799
800		connector {
801			compatible = "usb-c-connector";
802			label = "USB-C";
803			data-role = "dual";
804
805			ports {
806				#address-cells = <1>;
807				#size-cells = <0>;
808
809				port@0 {
810					reg = <0>;
811
812					usb_con_hs: endpoint {
813						remote-endpoint = <&typec_hs>;
814					};
815				};
816
817				port@1 {
818					reg = <1>;
819
820					usb_con_ss: endpoint {
821						remote-endpoint = <&typec_ss>;
822					};
823				};
824			};
825		};
826	};
827
828	pmic: pmic@4b {
829		compatible = "rohm,bd71837";
830		reg = <0x4b>;
831		pinctrl-names = "default";
832		pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
833		clocks = <&pmic_osc>;
834		#clock-cells = <0>;
835		clock-names = "osc";
836		clock-output-names = "pmic_clk";
837		interrupt-parent = <&gpio1>;
838		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
839		rohm,reset-snvs-powered;
840
841		regulators {
842			buck1_reg: BUCK1 {
843				regulator-name = "buck1";
844				regulator-min-microvolt = <700000>;
845				regulator-max-microvolt = <1300000>;
846				regulator-boot-on;
847				regulator-ramp-delay = <1250>;
848				rohm,dvs-run-voltage = <880000>;
849				rohm,dvs-idle-voltage = <820000>;
850				rohm,dvs-suspend-voltage = <810000>;
851				regulator-always-on;
852			};
853
854			buck2_reg: BUCK2 {
855				regulator-name = "buck2";
856				regulator-min-microvolt = <700000>;
857				regulator-max-microvolt = <1300000>;
858				regulator-boot-on;
859				regulator-ramp-delay = <1250>;
860				rohm,dvs-run-voltage = <950000>;
861				rohm,dvs-idle-voltage = <850000>;
862				regulator-always-on;
863			};
864
865			buck3_reg: BUCK3 {
866				regulator-name = "buck3";
867				regulator-min-microvolt = <700000>;
868				regulator-max-microvolt = <1300000>;
869				regulator-boot-on;
870				rohm,dvs-run-voltage = <850000>;
871			};
872
873			buck4_reg: BUCK4 {
874				regulator-name = "buck4";
875				regulator-min-microvolt = <700000>;
876				regulator-max-microvolt = <1300000>;
877				rohm,dvs-run-voltage = <930000>;
878			};
879
880			buck5_reg: BUCK5 {
881				regulator-name = "buck5";
882				regulator-min-microvolt = <700000>;
883				regulator-max-microvolt = <1350000>;
884				regulator-boot-on;
885				regulator-always-on;
886			};
887
888			buck6_reg: BUCK6 {
889				regulator-name = "buck6";
890				regulator-min-microvolt = <3000000>;
891				regulator-max-microvolt = <3300000>;
892				regulator-boot-on;
893				regulator-always-on;
894			};
895
896			buck7_reg: BUCK7 {
897				regulator-name = "buck7";
898				regulator-min-microvolt = <1605000>;
899				regulator-max-microvolt = <1995000>;
900				regulator-boot-on;
901				regulator-always-on;
902			};
903
904			buck8_reg: BUCK8 {
905				regulator-name = "buck8";
906				regulator-min-microvolt = <800000>;
907				regulator-max-microvolt = <1400000>;
908				regulator-boot-on;
909				regulator-always-on;
910			};
911
912			ldo1_reg: LDO1 {
913				regulator-name = "ldo1";
914				regulator-min-microvolt = <3000000>;
915				regulator-max-microvolt = <3300000>;
916				regulator-boot-on;
917				/* leave on for snvs power button */
918				regulator-always-on;
919			};
920
921			ldo2_reg: LDO2 {
922				regulator-name = "ldo2";
923				regulator-min-microvolt = <900000>;
924				regulator-max-microvolt = <900000>;
925				regulator-boot-on;
926				/* leave on for snvs power button */
927				regulator-always-on;
928			};
929
930			ldo3_reg: LDO3 {
931				regulator-name = "ldo3";
932				regulator-min-microvolt = <1800000>;
933				regulator-max-microvolt = <3300000>;
934				regulator-boot-on;
935				regulator-always-on;
936			};
937
938			ldo4_reg: LDO4 {
939				regulator-name = "ldo4";
940				regulator-min-microvolt = <900000>;
941				regulator-max-microvolt = <1800000>;
942				regulator-boot-on;
943				regulator-always-on;
944			};
945
946			ldo5_reg: LDO5 {
947				/* VDD_PHY_0V9 - MIPI and HDMI domains */
948				regulator-name = "ldo5";
949				regulator-min-microvolt = <1800000>;
950				regulator-max-microvolt = <3300000>;
951				regulator-always-on;
952			};
953
954			ldo6_reg: LDO6 {
955				/* VDD_PHY_0V9 - MIPI, HDMI and USB domains */
956				regulator-name = "ldo6";
957				regulator-min-microvolt = <900000>;
958				regulator-max-microvolt = <1800000>;
959				regulator-boot-on;
960				regulator-always-on;
961			};
962
963			ldo7_reg: LDO7 {
964				/* VDD_PHY_3V3 - USB domain */
965				regulator-name = "ldo7";
966				regulator-min-microvolt = <1800000>;
967				regulator-max-microvolt = <3300000>;
968				regulator-boot-on;
969				regulator-always-on;
970			};
971		};
972	};
973
974	rtc@68 {
975		compatible = "microcrystal,rv4162";
976		reg = <0x68>;
977		pinctrl-names = "default";
978		pinctrl-0 = <&pinctrl_rtc>;
979		interrupt-parent = <&gpio1>;
980		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
981	};
982};
983
984&i2c2 {
985	clock-frequency = <384000>;
986	pinctrl-names = "default";
987	pinctrl-0 = <&pinctrl_i2c2>;
988	status = "okay";
989
990	magnetometer: magnetometer@1e	{
991		compatible = "st,lsm9ds1-magn";
992		reg = <0x1e>;
993		pinctrl-names = "default";
994		pinctrl-0 = <&pinctrl_mag>;
995		interrupt-parent = <&gpio3>;
996		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
997		vdd-supply = <&reg_vdd_sen>;
998		vddio-supply = <&reg_vdd_1v8>;
999	};
1000
1001	regulator@3e {
1002		compatible = "ti,tps65132";
1003		reg = <0x3e>;
1004
1005		reg_lcd_avdd: outp {
1006			regulator-name = "LCD_AVDD";
1007			vin-supply = <&reg_lcd_3v4>;
1008		};
1009
1010		reg_lcd_avee: outn {
1011			regulator-name = "LCD_AVEE";
1012			vin-supply = <&reg_lcd_3v4>;
1013		};
1014	};
1015
1016	proximity: prox@60 {
1017		compatible = "vishay,vcnl4040";
1018		reg = <0x60>;
1019		pinctrl-names = "default";
1020		pinctrl-0 = <&pinctrl_prox>;
1021		interrupt-parent = <&gpio3>;
1022		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
1023	};
1024
1025	accel_gyro: accel-gyro@6a	{
1026		compatible = "st,lsm9ds1-imu";
1027		reg = <0x6a>;
1028		vdd-supply = <&reg_vdd_sen>;
1029		vddio-supply = <&reg_vdd_1v8>;
1030	};
1031};
1032
1033&i2c3 {
1034	clock-frequency = <384000>;
1035	pinctrl-names = "default";
1036	pinctrl-0 = <&pinctrl_i2c3>;
1037	status = "okay";
1038
1039	codec: audio-codec@1a {
1040		compatible = "wlf,wm8962";
1041		reg = <0x1a>;
1042		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
1043		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
1044		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
1045		assigned-clock-rates = <24576000>;
1046		#sound-dai-cells = <0>;
1047		mic-cfg = <0x200>;
1048		DCVDD-supply = <&reg_aud_1v8>;
1049		DBVDD-supply = <&reg_aud_1v8>;
1050		AVDD-supply = <&reg_aud_1v8>;
1051		CPVDD-supply = <&reg_aud_1v8>;
1052		MICVDD-supply = <&reg_mic_2v4>;
1053		PLLVDD-supply = <&reg_aud_1v8>;
1054		SPKVDD1-supply = <&reg_vsys_3v4>;
1055		SPKVDD2-supply = <&reg_vsys_3v4>;
1056		gpio-cfg = <
1057			0x0000 /* n/c */
1058			0x0001 /* gpio2, 1: default */
1059			0x0013 /* gpio3, 2: dmicclk */
1060			0x0000 /* n/c, 3: default */
1061			0x8014 /* gpio5, 4: dmic_dat */
1062			0x0000 /* gpio6, 5: default */
1063		>;
1064	};
1065
1066	camera_front: camera@20 {
1067		compatible = "hynix,hi846";
1068		reg = <0x20>;
1069		pinctrl-names = "default";
1070		pinctrl-0 = <&pinctrl_csi1>;
1071		clocks = <&clk IMX8MQ_CLK_CLKO2>;
1072		assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>;
1073		assigned-clock-rates = <25000000>;
1074		reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
1075		vdda-supply = <&reg_vcam_2v8>;
1076		vddd-supply = <&reg_vcam_1v2>;
1077		vddio-supply = <&reg_csi_1v8>;
1078		rotation = <90>;
1079		orientation = <0>;
1080
1081		port {
1082			camera1_ep: endpoint {
1083				data-lanes = <1 2>;
1084				link-frequencies = /bits/ 64
1085					<80000000 200000000 300000000>;
1086				remote-endpoint = <&mipi1_sensor_ep>;
1087			};
1088		};
1089	};
1090
1091	backlight@36 {
1092		compatible = "ti,lm36922";
1093		reg = <0x36>;
1094		pinctrl-names = "default";
1095		pinctrl-0 = <&pinctrl_bl>;
1096		#address-cells = <1>;
1097		#size-cells = <0>;
1098		enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
1099		vled-supply = <&reg_vsys_3v4>;
1100		ti,ovp-microvolt = <25000000>;
1101
1102		led_backlight: led@0 {
1103			reg = <0>;
1104			label = ":backlight";
1105			linux,default-trigger = "backlight";
1106			led-max-microamp = <20000>;
1107		};
1108	};
1109
1110	touchscreen@38 {
1111		compatible = "edt,edt-ft5506";
1112		reg = <0x38>;
1113		pinctrl-names = "default";
1114		pinctrl-0 = <&pinctrl_touch>;
1115		interrupt-parent = <&gpio1>;
1116		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
1117		touchscreen-size-x = <720>;
1118		touchscreen-size-y = <1440>;
1119		vcc-supply = <&reg_lcd_1v8>;
1120	};
1121};
1122
1123&i2c4 {
1124	clock-frequency = <384000>;
1125	pinctrl-names = "default";
1126	pinctrl-0 = <&pinctrl_i2c4>;
1127	status = "okay";
1128
1129	vcm@c {
1130		compatible = "dongwoon,dw9714";
1131		reg = <0x0c>;
1132		vcc-supply = <&reg_csi_1v8>;
1133	};
1134
1135	bat: fuel-gauge@36 {
1136		compatible = "maxim,max17055";
1137		reg = <0x36>;
1138		interrupt-parent = <&gpio3>;
1139		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
1140		pinctrl-names = "default";
1141		pinctrl-0 = <&pinctrl_gauge>;
1142		power-supplies = <&bq25895>;
1143		maxim,over-heat-temp = <700>;
1144		maxim,over-volt = <4500>;
1145		maxim,rsns-microohm = <5000>;
1146	};
1147
1148	bq25895: charger@6a {
1149		compatible = "ti,bq25895", "ti,bq25890";
1150		reg = <0x6a>;
1151		pinctrl-names = "default";
1152		pinctrl-0 = <&pinctrl_charger_in>;
1153		interrupt-parent = <&gpio3>;
1154		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
1155		ti,battery-regulation-voltage = <4208000>; /* uV */
1156		ti,termination-current = <128000>;  /* uA */
1157		ti,precharge-current = <128000>; /* uA */
1158		ti,minimum-sys-voltage = <3700000>; /* uV */
1159		ti,boost-voltage = <5000000>; /* uV */
1160		ti,boost-max-current = <1500000>; /* uA */
1161		monitored-battery = <&bat>;
1162		power-supplies = <&typec_pd>;
1163	};
1164};
1165
1166&lcdif {
1167	status = "okay";
1168};
1169
1170&mipi_csi1 {
1171	assigned-clock-rates = <266000000>, <200000000>, <66000000>;
1172	status = "okay";
1173
1174	ports {
1175		port@0 {
1176			reg = <0>;
1177
1178			mipi1_sensor_ep: endpoint {
1179				remote-endpoint = <&camera1_ep>;
1180				data-lanes = <1 2>;
1181			};
1182		};
1183	};
1184};
1185
1186&mipi_dsi {
1187	#address-cells = <1>;
1188	#size-cells = <0>;
1189	status = "okay";
1190
1191	lcd_panel: panel@0 {
1192		compatible = "mantix,mlaf057we51-x";
1193		reg = <0>;
1194		pinctrl-names = "default";
1195		pinctrl-0 = <&pinctrl_dsirst>;
1196		avdd-supply = <&reg_lcd_avdd>;
1197		avee-supply = <&reg_lcd_avee>;
1198		vddi-supply = <&reg_lcd_1v8>;
1199		backlight = <&backlight_dsi>;
1200		reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
1201		mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
1202
1203		port {
1204			panel_in: endpoint {
1205				remote-endpoint = <&mipi_dsi_out>;
1206			};
1207		};
1208	};
1209
1210	ports {
1211		port@1 {
1212			reg = <1>;
1213
1214			mipi_dsi_out: endpoint {
1215				remote-endpoint = <&panel_in>;
1216			};
1217		};
1218	};
1219};
1220
1221&pgc_gpu {
1222	power-supply = <&buck3_reg>;
1223};
1224
1225&pgc_mipi {
1226	power-supply = <&ldo5_reg>;
1227};
1228
1229&pgc_vpu {
1230	power-supply = <&buck4_reg>;
1231};
1232
1233&pwm1 {
1234	pinctrl-names = "default";
1235	pinctrl-0 = <&pinctrl_haptic>;
1236	status = "okay";
1237};
1238
1239&pwm2 {
1240	pinctrl-names = "default";
1241	pinctrl-0 = <&pinctrl_led_b>;
1242	status = "okay";
1243};
1244
1245&pwm3 {
1246	pinctrl-names = "default";
1247	pinctrl-0 = <&pinctrl_led_r>;
1248	status = "okay";
1249};
1250
1251&pwm4 {
1252	pinctrl-names = "default";
1253	pinctrl-0 = <&pinctrl_led_g>;
1254	status = "okay";
1255};
1256
1257&sai2 {
1258	pinctrl-names = "default";
1259	pinctrl-0 = <&pinctrl_sai2>;
1260	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
1261	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
1262	assigned-clock-rates = <24576000>;
1263	status = "okay";
1264};
1265
1266&sai6 {
1267	pinctrl-names = "default";
1268	pinctrl-0 = <&pinctrl_sai6>;
1269	assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
1270	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
1271	assigned-clock-rates = <24576000>;
1272	fsl,sai-synchronous-rx;
1273	status = "okay";
1274};
1275
1276&snvs_pwrkey {
1277	status = "okay";
1278};
1279
1280&snvs_rtc {
1281	status = "disabled";
1282};
1283
1284&uart1 { /* console */
1285	pinctrl-names = "default";
1286	pinctrl-0 = <&pinctrl_uart1>;
1287	status = "okay";
1288};
1289
1290&uart2 { /* TPS - GPS - DEBUG */
1291	pinctrl-names = "default";
1292	pinctrl-0 = <&pinctrl_uart2>;
1293	status = "okay";
1294
1295	gnss {
1296		compatible = "globaltop,pa6h";
1297		vcc-supply = <&reg_gnss>;
1298		current-speed = <9600>;
1299	};
1300};
1301
1302&uart3 { /* SMC */
1303	pinctrl-names = "default";
1304	pinctrl-0 = <&pinctrl_uart3>;
1305	status = "okay";
1306};
1307
1308&uart4 { /* BT */
1309	pinctrl-names = "default";
1310	pinctrl-0 = <&pinctrl_uart4>;
1311	uart-has-rtscts;
1312	status = "okay";
1313};
1314
1315&usb3_phy0 {
1316	status = "okay";
1317};
1318
1319&usb3_phy1 {
1320	vbus-supply = <&reg_hub>;
1321	status = "okay";
1322};
1323
1324&usb_dwc3_0 {
1325	#address-cells = <1>;
1326	#size-cells = <0>;
1327	dr_mode = "otg";
1328	usb-role-switch;
1329	status = "okay";
1330
1331	port@0 {
1332		reg = <0>;
1333
1334		typec_hs: endpoint {
1335			remote-endpoint = <&usb_con_hs>;
1336		};
1337	};
1338
1339	port@1 {
1340		reg = <1>;
1341
1342		typec_ss: endpoint {
1343			remote-endpoint = <&usb_con_ss>;
1344		};
1345	};
1346};
1347
1348&usb_dwc3_1 {
1349	dr_mode = "host";
1350	status = "okay";
1351	#address-cells = <1>;
1352	#size-cells = <0>;
1353
1354	/* Microchip USB2642 */
1355	hub@1 {
1356		compatible = "usb424,2640";
1357		reg = <1>;
1358		#address-cells = <1>;
1359		#size-cells = <0>;
1360
1361		mass-storage@1 {
1362			compatible = "usb424,4041";
1363			reg = <1>;
1364		};
1365	};
1366};
1367
1368&usdhc1 {
1369	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
1370	assigned-clock-rates = <400000000>;
1371	pinctrl-names = "default", "state_100mhz", "state_200mhz";
1372	pinctrl-0 = <&pinctrl_usdhc1>;
1373	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
1374	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
1375	bus-width = <8>;
1376	vmmc-supply = <&reg_vdd_3v3>;
1377	vqmmc-supply = <&reg_vdd_1v8>;
1378	non-removable;
1379	status = "okay";
1380};
1381
1382&usdhc2 {
1383	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
1384	assigned-clock-rates = <200000000>;
1385	pinctrl-names = "default", "state_100mhz", "state_200mhz";
1386	pinctrl-0 = <&pinctrl_usdhc2>;
1387	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
1388	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
1389	bus-width = <4>;
1390	vmmc-supply = <&reg_wifi_3v3>;
1391	mmc-pwrseq = <&usdhc2_pwrseq>;
1392	post-power-on-delay-ms = <20>;
1393	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
1394	max-frequency = <100000000>;
1395	disable-wp;
1396	cap-sdio-irq;
1397	keep-power-in-suspend;
1398	wakeup-source;
1399	status = "okay";
1400};
1401
1402&wdog1 {
1403	pinctrl-names = "default";
1404	pinctrl-0 = <&pinctrl_wdog>;
1405	fsl,ext-reset-output;
1406	status = "okay";
1407};
1408
1409&a53_opp_table {
1410	opp-1000000000 {
1411		opp-microvolt = <850000>;
1412	};
1413
1414	opp-1500000000 {
1415		opp-microvolt = <950000>;
1416	};
1417};
1418