1// SPDX-License-Identifier: GPL-2.0+ OR MIT 2/* 3 * Copyright (C) 2019 Kontron Electronics GmbH 4 */ 5 6/dts-v1/; 7 8#include "imx8mm-kontron-sl.dtsi" 9 10/ { 11 model = "Kontron BL i.MX8MM (N801X S)"; 12 compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm"; 13 14 aliases { 15 ethernet1 = &usbnet; 16 rtc0 = &rx8900; 17 rtc1 = &snvs_rtc; 18 }; 19 20 /* fixed crystal dedicated to mcp2515 */ 21 osc_can: clock-osc-can { 22 compatible = "fixed-clock"; 23 #clock-cells = <0>; 24 clock-frequency = <16000000>; 25 clock-output-names = "osc-can"; 26 }; 27 28 leds { 29 compatible = "gpio-leds"; 30 pinctrl-names = "default"; 31 pinctrl-0 = <&pinctrl_gpio_led>; 32 33 led1 { 34 label = "led1"; 35 gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; 36 linux,default-trigger = "heartbeat"; 37 }; 38 39 led2 { 40 label = "led2"; 41 gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; 42 }; 43 44 led3 { 45 label = "led3"; 46 gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; 47 }; 48 49 led4 { 50 label = "led4"; 51 gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; 52 }; 53 54 led5 { 55 label = "led5"; 56 gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; 57 }; 58 59 led6 { 60 label = "led6"; 61 gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; 62 }; 63 }; 64 65 pwm-beeper { 66 compatible = "pwm-beeper"; 67 pwms = <&pwm2 0 5000 0>; 68 }; 69 70 reg_rst_eth2: regulator-rst-eth2 { 71 compatible = "regulator-fixed"; 72 regulator-name = "rst-usb-eth2"; 73 pinctrl-names = "default"; 74 pinctrl-0 = <&pinctrl_usb_eth2>; 75 gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; 76 enable-active-high; 77 regulator-always-on; 78 }; 79 80 reg_vdd_5v: regulator-5v { 81 compatible = "regulator-fixed"; 82 regulator-name = "vdd-5v"; 83 regulator-min-microvolt = <5000000>; 84 regulator-max-microvolt = <5000000>; 85 }; 86}; 87 88&ecspi2 { 89 pinctrl-names = "default"; 90 pinctrl-0 = <&pinctrl_ecspi2>; 91 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; 92 status = "okay"; 93 94 can0: can@0 { 95 compatible = "microchip,mcp2515"; 96 reg = <0>; 97 pinctrl-names = "default"; 98 pinctrl-0 = <&pinctrl_can>; 99 clocks = <&osc_can>; 100 interrupt-parent = <&gpio4>; 101 interrupts = <28 IRQ_TYPE_EDGE_FALLING>; 102 spi-max-frequency = <10000000>; 103 vdd-supply = <®_vdd_3v3>; 104 xceiver-supply = <®_vdd_5v>; 105 }; 106}; 107 108&ecspi3 { 109 pinctrl-names = "default"; 110 pinctrl-0 = <&pinctrl_ecspi3>; 111 cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; 112 status = "okay"; 113}; 114 115&fec1 { 116 pinctrl-names = "default"; 117 pinctrl-0 = <&pinctrl_enet>; 118 phy-connection-type = "rgmii-rxid"; 119 phy-handle = <ðphy>; 120 status = "okay"; 121 122 mdio { 123 #address-cells = <1>; 124 #size-cells = <0>; 125 126 ethphy: ethernet-phy@0 { 127 reg = <0>; 128 reset-assert-us = <1>; 129 reset-deassert-us = <15000>; 130 reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; 131 }; 132 }; 133}; 134 135&i2c4 { 136 clock-frequency = <100000>; 137 pinctrl-names = "default"; 138 pinctrl-0 = <&pinctrl_i2c4>; 139 status = "okay"; 140 141 rx8900: rtc@32 { 142 compatible = "epson,rx8900"; 143 reg = <0x32>; 144 }; 145}; 146 147&pwm2 { 148 pinctrl-names = "default"; 149 pinctrl-0 = <&pinctrl_pwm2>; 150 status = "okay"; 151}; 152 153&uart1 { 154 pinctrl-names = "default"; 155 pinctrl-0 = <&pinctrl_uart1>; 156 uart-has-rtscts; 157 status = "okay"; 158}; 159 160&uart2 { 161 pinctrl-names = "default"; 162 pinctrl-0 = <&pinctrl_uart2>; 163 linux,rs485-enabled-at-boot-time; 164 uart-has-rtscts; 165 status = "okay"; 166}; 167 168&usbotg1 { 169 dr_mode = "otg"; 170 over-current-active-low; 171 status = "okay"; 172}; 173 174&usbotg2 { 175 dr_mode = "host"; 176 disable-over-current; 177 #address-cells = <1>; 178 #size-cells = <0>; 179 status = "okay"; 180 181 usb1@1 { 182 compatible = "usb424,9514"; 183 reg = <1>; 184 #address-cells = <1>; 185 #size-cells = <0>; 186 187 usbnet: ethernet@1 { 188 compatible = "usb424,ec00"; 189 reg = <1>; 190 local-mac-address = [ 00 00 00 00 00 00 ]; 191 }; 192 }; 193}; 194 195&usdhc2 { 196 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 197 pinctrl-0 = <&pinctrl_usdhc2>; 198 pinctrl-1 = <&pinctrl_usdhc2_100mhz>; 199 pinctrl-2 = <&pinctrl_usdhc2_200mhz>; 200 vmmc-supply = <®_vdd_3v3>; 201 vqmmc-supply = <®_nvcc_sd>; 202 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; 203 status = "okay"; 204}; 205 206&iomuxc { 207 pinctrl-names = "default"; 208 pinctrl-0 = <&pinctrl_gpio>; 209 210 pinctrl_can: cangrp { 211 fsl,pins = < 212 MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 213 >; 214 }; 215 216 pinctrl_ecspi2: ecspi2grp { 217 fsl,pins = < 218 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 219 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 220 MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 221 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 222 >; 223 }; 224 225 pinctrl_ecspi3: ecspi3grp { 226 fsl,pins = < 227 MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 228 MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 229 MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 230 MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 231 >; 232 }; 233 234 pinctrl_enet: enetgrp { 235 fsl,pins = < 236 MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 237 MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 238 MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f 239 MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f 240 MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f 241 MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f 242 MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 243 MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 244 MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 245 MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 246 MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f 247 MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 248 MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 249 MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f 250 MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ 251 MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ 252 >; 253 }; 254 255 pinctrl_gpio_led: gpioledgrp { 256 fsl,pins = < 257 MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 258 MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 259 MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 260 MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 261 MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 262 MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 263 MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 264 >; 265 }; 266 267 pinctrl_gpio: gpiogrp { 268 fsl,pins = < 269 MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 270 MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 271 MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 272 MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 273 MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 274 MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 275 MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 276 MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 277 >; 278 }; 279 280 pinctrl_i2c4: i2c4grp { 281 fsl,pins = < 282 MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000083 283 MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000083 284 >; 285 }; 286 287 pinctrl_pwm2: pwm2grp { 288 fsl,pins = < 289 MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 290 >; 291 }; 292 293 pinctrl_uart1: uart1grp { 294 fsl,pins = < 295 MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x0 296 MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x0 297 MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x0 298 MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x0 299 >; 300 }; 301 302 pinctrl_uart2: uart2grp { 303 fsl,pins = < 304 MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0 305 MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0 306 MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0 307 MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0 308 >; 309 }; 310 311 pinctrl_usb_eth2: usbeth2grp { 312 fsl,pins = < 313 MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 314 >; 315 }; 316 317 pinctrl_usdhc2: usdhc2grp { 318 fsl,pins = < 319 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90 320 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 321 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 322 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 323 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 324 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 325 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 326 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 327 >; 328 }; 329 330 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { 331 fsl,pins = < 332 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94 333 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 334 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 335 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 336 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 337 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 338 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 339 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 340 >; 341 }; 342 343 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { 344 fsl,pins = < 345 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96 346 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 347 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 348 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 349 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 350 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 351 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 352 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 353 >; 354 }; 355}; 356