xref: /linux/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts (revision 03ab8e6297acd1bc0eedaa050e2a1635c576fd11)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2019 NXP
4 * Copyright (c) 2019 Engicam srl
5 * Copyright (c) 2020 Amarula Solutions(India)
6 */
7
8/dts-v1/;
9#include "imx8mm.dtsi"
10#include "imx8mm-icore-mx8mm.dtsi"
11
12/ {
13	model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit";
14	compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm",
15		     "fsl,imx8mm";
16
17	chosen {
18		stdout-path = &uart2;
19	};
20};
21
22&fec1 {
23	status = "okay";
24};
25
26&i2c2 {
27	clock-frequency = <400000>;
28	pinctrl-names = "default";
29	pinctrl-0 = <&pinctrl_i2c2>;
30	status = "okay";
31};
32
33&i2c4 {
34	clock-frequency = <100000>;
35	pinctrl-names = "default";
36	pinctrl-0 = <&pinctrl_i2c4>;
37	status = "okay";
38};
39
40&iomuxc {
41	pinctrl_i2c2: i2c2grp {
42		fsl,pins = <
43			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
44			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
45		>;
46	};
47
48	pinctrl_i2c4: i2c4grp {
49		fsl,pins = <
50			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
51			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
52		>;
53	};
54
55	pinctrl_uart2: uart2grp {
56		fsl,pins = <
57			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
58			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
59		>;
60	};
61
62	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
63		fsl,pins = <
64			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x41
65		>;
66	};
67
68	pinctrl_usdhc1: usdhc1grp {
69		fsl,pins = <
70			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
71			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
72			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
73			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
74			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
75			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
76		>;
77	};
78};
79
80&uart2 {
81	pinctrl-names = "default";
82	pinctrl-0 = <&pinctrl_uart2>;
83	status = "okay";
84};
85
86/* SD */
87&usdhc1 {
88	pinctrl-names = "default";
89	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
90	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
91	max-frequency = <50000000>;
92	bus-width = <4>;
93	no-1-8-v;
94	keep-power-in-suspend;
95	status = "okay";
96};
97