xref: /linux/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi (revision 3a39d672e7f48b8d6b91a09afa4b55352773b4b5) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
4 */
5
6#include "meson-sm1.dtsi"
7#include <dt-bindings/gpio/meson-g12a-gpio.h>
8#include <dt-bindings/leds/common.h>
9#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
10
11/ {
12	aliases {
13		serial0 = &uart_AO;
14		ethernet0 = &ethmac;
15	};
16
17	chosen {
18		stdout-path = "serial0:115200n8";
19	};
20
21	memory@0 {
22		device_type = "memory";
23		reg = <0x0 0x0 0x0 0x40000000>;
24	};
25
26	emmc_pwrseq: emmc-pwrseq {
27		compatible = "mmc-pwrseq-emmc";
28		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
29	};
30
31	tflash_vdd: regulator-tflash-vdd {
32		compatible = "regulator-fixed";
33
34		regulator-name = "TFLASH_VDD";
35		regulator-min-microvolt = <3300000>;
36		regulator-max-microvolt = <3300000>;
37
38		gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
39		enable-active-high;
40		regulator-always-on;
41	};
42
43	tf_io: gpio-regulator-tf-io {
44		compatible = "regulator-gpio";
45
46		regulator-name = "TF_IO";
47		regulator-min-microvolt = <1800000>;
48		regulator-max-microvolt = <3300000>;
49		vin-supply = <&vcc_5v>;
50
51		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
52		enable-active-high;
53		regulator-always-on;
54
55		gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>;
56		gpios-states = <0>;
57
58		states = <3300000 0>,
59			 <1800000 1>;
60	};
61
62	flash_1v8: regulator-flash-1v8 {
63		compatible = "regulator-fixed";
64		regulator-name = "FLASH_1V8";
65		regulator-min-microvolt = <1800000>;
66		regulator-max-microvolt = <1800000>;
67		vin-supply = <&vcc_3v3>;
68		regulator-always-on;
69	};
70
71	main_12v: regulator-main-12v {
72		compatible = "regulator-fixed";
73		regulator-name = "12V";
74		regulator-min-microvolt = <12000000>;
75		regulator-max-microvolt = <12000000>;
76		regulator-always-on;
77	};
78
79	vcc_5v: regulator-vcc-5v {
80		compatible = "regulator-fixed";
81		regulator-name = "5V";
82		regulator-min-microvolt = <5000000>;
83		regulator-max-microvolt = <5000000>;
84		regulator-always-on;
85		vin-supply = <&main_12v>;
86		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
87		enable-active-high;
88	};
89
90	vcc_1v8: regulator-vcc-1v8 {
91		compatible = "regulator-fixed";
92		regulator-name = "VCC_1V8";
93		regulator-min-microvolt = <1800000>;
94		regulator-max-microvolt = <1800000>;
95		vin-supply = <&vcc_3v3>;
96		regulator-always-on;
97	};
98
99	vcc_3v3: regulator-vcc-3v3 {
100		compatible = "regulator-fixed";
101		regulator-name = "VCC_3V3";
102		regulator-min-microvolt = <3300000>;
103		regulator-max-microvolt = <3300000>;
104		vin-supply = <&vddao_3v3>;
105		regulator-always-on;
106		/* FIXME: actually controlled by VDDCPU_B_EN */
107	};
108
109	vddcpu: regulator-vddcpu {
110		/*
111		 * MP8756GD Regulator.
112		 */
113		compatible = "pwm-regulator";
114
115		regulator-name = "VDDCPU";
116		regulator-min-microvolt = <721000>;
117		regulator-max-microvolt = <1022000>;
118
119		pwm-supply = <&main_12v>;
120
121		pwms = <&pwm_AO_cd 1 1250 0>;
122		pwm-dutycycle-range = <100 0>;
123
124		regulator-boot-on;
125		regulator-always-on;
126	};
127
128	usb_pwr_en: regulator-usb-pwr-en {
129		compatible = "regulator-fixed";
130		regulator-name = "USB_PWR_EN";
131		regulator-min-microvolt = <5000000>;
132		regulator-max-microvolt = <5000000>;
133		vin-supply = <&vcc_5v>;
134
135		/* Connected to the microUSB port power enable */
136		gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
137		enable-active-high;
138	};
139
140	vddao_1v8: regulator-vddao-1v8 {
141		compatible = "regulator-fixed";
142		regulator-name = "VDDAO_1V8";
143		regulator-min-microvolt = <1800000>;
144		regulator-max-microvolt = <1800000>;
145		vin-supply = <&vddao_3v3>;
146		regulator-always-on;
147	};
148
149	vddao_3v3: regulator-vddao-3v3 {
150		compatible = "regulator-fixed";
151		regulator-name = "VDDAO_3V3";
152		regulator-min-microvolt = <3300000>;
153		regulator-max-microvolt = <3300000>;
154		vin-supply = <&main_12v>;
155		regulator-always-on;
156	};
157
158	hdmi-connector {
159		compatible = "hdmi-connector";
160		type = "a";
161
162		port {
163			hdmi_connector_in: endpoint {
164				remote-endpoint = <&hdmi_tx_tmds_out>;
165			};
166		};
167	};
168
169	sound {
170		compatible = "amlogic,axg-sound-card";
171		audio-aux-devs = <&tdmout_b>;
172		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
173				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
174				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
175				"TDM_B Playback", "TDMOUT_B OUT";
176
177		clocks = <&clkc CLKID_MPLL2>,
178			 <&clkc CLKID_MPLL0>,
179			 <&clkc CLKID_MPLL1>;
180
181		assigned-clocks = <&clkc CLKID_MPLL2>,
182				  <&clkc CLKID_MPLL0>,
183				  <&clkc CLKID_MPLL1>;
184		assigned-clock-parents = <0>, <0>, <0>;
185		assigned-clock-rates = <294912000>,
186				       <270950400>,
187				       <393216000>;
188
189		dai-link-0 {
190			sound-dai = <&frddr_a>;
191		};
192
193		dai-link-1 {
194			sound-dai = <&frddr_b>;
195		};
196
197		dai-link-2 {
198			sound-dai = <&frddr_c>;
199		};
200
201		/* 8ch hdmi interface */
202		dai-link-3 {
203			sound-dai = <&tdmif_b>;
204			dai-format = "i2s";
205			dai-tdm-slot-tx-mask-0 = <1 1>;
206			dai-tdm-slot-tx-mask-1 = <1 1>;
207			dai-tdm-slot-tx-mask-2 = <1 1>;
208			dai-tdm-slot-tx-mask-3 = <1 1>;
209			mclk-fs = <256>;
210
211			codec {
212				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
213			};
214		};
215
216		/* hdmi glue */
217		dai-link-4 {
218			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
219
220			codec {
221				sound-dai = <&hdmi_tx>;
222			};
223		};
224	};
225};
226
227&arb {
228	status = "okay";
229};
230
231&cec_AO {
232	pinctrl-0 = <&cec_ao_a_h_pins>;
233	pinctrl-names = "default";
234	status = "disabled";
235	hdmi-phandle = <&hdmi_tx>;
236};
237
238&cecb_AO {
239	pinctrl-0 = <&cec_ao_b_h_pins>;
240	pinctrl-names = "default";
241	status = "okay";
242	hdmi-phandle = <&hdmi_tx>;
243};
244
245&clkc_audio {
246	status = "okay";
247};
248
249&cpu0 {
250	cpu-supply = <&vddcpu>;
251	operating-points-v2 = <&cpu_opp_table>;
252	clocks = <&clkc CLKID_CPU_CLK>;
253	clock-latency = <50000>;
254};
255
256&cpu1 {
257	cpu-supply = <&vddcpu>;
258	operating-points-v2 = <&cpu_opp_table>;
259	clocks = <&clkc CLKID_CPU1_CLK>;
260	clock-latency = <50000>;
261};
262
263&cpu2 {
264	cpu-supply = <&vddcpu>;
265	operating-points-v2 = <&cpu_opp_table>;
266	clocks = <&clkc CLKID_CPU2_CLK>;
267	clock-latency = <50000>;
268};
269
270&cpu3 {
271	cpu-supply = <&vddcpu>;
272	operating-points-v2 = <&cpu_opp_table>;
273	clocks = <&clkc CLKID_CPU3_CLK>;
274	clock-latency = <50000>;
275};
276
277&ext_mdio {
278	external_phy: ethernet-phy@0 {
279		/* Realtek RTL8211F (0x001cc916) */
280		reg = <0>;
281		max-speed = <1000>;
282
283		reset-assert-us = <10000>;
284		reset-deassert-us = <80000>;
285		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
286
287		interrupt-parent = <&gpio_intc>;
288		/* MAC_INTR on GPIOZ_14 */
289		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
290	};
291};
292
293&ethmac {
294	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
295	pinctrl-names = "default";
296	status = "okay";
297	phy-mode = "rgmii";
298	phy-handle = <&external_phy>;
299	amlogic,tx-delay-ns = <2>;
300};
301
302&frddr_a {
303	status = "okay";
304};
305
306&frddr_b {
307	status = "okay";
308};
309
310&frddr_c {
311	status = "okay";
312};
313
314&gpio {
315	gpio-line-names =
316		/* GPIOZ */
317		"", "", "", "", "", "", "", "",
318		"", "", "", "", "", "", "", "",
319		/* GPIOH */
320		"", "", "", "", "",
321		"PIN_36", /* GPIOH_5 */
322		"PIN_26", /* GPIOH_6 */
323		"PIN_32", /* GPIOH_7 */
324		"",
325		/* BOOT */
326		"", "", "", "", "", "", "", "",
327		"", "", "", "", "", "", "", "",
328		/* GPIOC */
329		"", "", "", "", "", "", "", "",
330		/* GPIOA */
331		"", "", "", "", "", "", "", "",
332		"", "", "", "", "", "",
333		"PIN_27", /* GPIOA_14 */
334		"PIN_28", /* GPIOA_15 */
335		/* GPIOX */
336		"PIN_16", /* GPIOX_0 */
337		"PIN_18", /* GPIOX_1 */
338		"PIN_22", /* GPIOX_2 */
339		"PIN_11", /* GPIOX_3 */
340		"PIN_13", /* GPIOX_4 */
341		"PIN_7",  /* GPIOX_5 */
342		"PIN_33", /* GPIOX_6 */
343		"PIN_15", /* GPIOX_7 */
344		"PIN_19", /* GPIOX_8 */
345		"PIN_21", /* GPIOX_9 */
346		"PIN_24", /* GPIOX_10 */
347		"PIN_23", /* GPIOX_11 */
348		"PIN_8",  /* GPIOX_12 */
349		"PIN_10", /* GPIOX_13 */
350		"PIN_29", /* GPIOX_14 */
351		"PIN_31", /* GPIOX_15 */
352		"PIN_12", /* GPIOX_16 */
353		"PIN_3",  /* GPIOX_17 */
354		"PIN_5",  /* GPIOX_18 */
355		"PIN_35"; /* GPIOX_19 */
356};
357
358&gpio_ao {
359	gpio-line-names =
360		/* GPIOAO */
361		"", "", "", "",
362		"PIN_47", /* GPIOAO_4 */
363		"", "",
364		"PIN_45", /* GPIOAO_7 */
365		"PIN_46", /* GPIOAO_8 */
366		"PIN_44", /* GPIOAO_9 */
367		"PIN_42", /* GPIOAO_10 */
368		"",
369		/* GPIOE */
370		"", "", "";
371};
372
373&hdmi_tx {
374	status = "okay";
375	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
376	pinctrl-names = "default";
377	hdmi-supply = <&vcc_5v>;
378};
379
380&hdmi_tx_tmds_port {
381	hdmi_tx_tmds_out: endpoint {
382		remote-endpoint = <&hdmi_connector_in>;
383	};
384};
385
386&ir {
387	status = "okay";
388	pinctrl-0 = <&remote_input_ao_pins>;
389	pinctrl-names = "default";
390};
391
392&pwm_AO_cd {
393	pinctrl-0 = <&pwm_ao_d_e_pins>;
394	pinctrl-names = "default";
395	clocks = <&xtal>;
396	clock-names = "clkin1";
397	status = "okay";
398};
399
400&saradc {
401	status = "okay";
402};
403
404/* SD card */
405&sd_emmc_b {
406	status = "okay";
407	pinctrl-0 = <&sdcard_c_pins>;
408	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
409	pinctrl-names = "default", "clk-gate";
410
411	bus-width = <4>;
412	cap-sd-highspeed;
413	max-frequency = <200000000>;
414	sd-uhs-sdr12;
415	sd-uhs-sdr25;
416	sd-uhs-sdr50;
417	sd-uhs-sdr104;
418	disable-wp;
419
420	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
421	vmmc-supply = <&tflash_vdd>;
422	vqmmc-supply = <&tf_io>;
423};
424
425/* eMMC */
426&sd_emmc_c {
427	status = "okay";
428	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
429	pinctrl-1 = <&emmc_clk_gate_pins>;
430	pinctrl-names = "default", "clk-gate";
431
432	bus-width = <8>;
433	cap-mmc-highspeed;
434	mmc-ddr-1_8v;
435	mmc-hs200-1_8v;
436	max-frequency = <200000000>;
437	disable-wp;
438
439	mmc-pwrseq = <&emmc_pwrseq>;
440	vmmc-supply = <&vcc_3v3>;
441	vqmmc-supply = <&flash_1v8>;
442};
443
444&tdmif_b {
445	status = "okay";
446};
447
448&tdmout_b {
449	status = "okay";
450};
451
452&tohdmitx {
453	status = "okay";
454};
455
456&uart_AO {
457	status = "okay";
458	pinctrl-0 = <&uart_ao_a_pins>;
459	pinctrl-names = "default";
460};
461
462&usb {
463	status = "okay";
464	vbus-supply = <&usb_pwr_en>;
465};
466
467&usb2_phy0 {
468	phy-supply = <&vcc_5v>;
469};
470
471