xref: /linux/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi (revision daa121128a2d2ac6006159e2c47676e4fcd21eab)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
3
4#include <dt-bindings/interrupt-controller/arm-gic.h>
5#include <dt-bindings/clock/sun50i-h6-ccu.h>
6#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
7#include <dt-bindings/clock/sun6i-rtc.h>
8#include <dt-bindings/clock/sun8i-de2.h>
9#include <dt-bindings/clock/sun8i-tcon-top.h>
10#include <dt-bindings/reset/sun50i-h6-ccu.h>
11#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
12#include <dt-bindings/reset/sun8i-de2.h>
13#include <dt-bindings/thermal/thermal.h>
14
15/ {
16	interrupt-parent = <&gic>;
17	#address-cells = <1>;
18	#size-cells = <1>;
19
20	cpus {
21		#address-cells = <1>;
22		#size-cells = <0>;
23
24		cpu0: cpu@0 {
25			compatible = "arm,cortex-a53";
26			device_type = "cpu";
27			reg = <0>;
28			enable-method = "psci";
29			clocks = <&ccu CLK_CPUX>;
30			clock-latency-ns = <244144>; /* 8 32k periods */
31			#cooling-cells = <2>;
32		};
33
34		cpu1: cpu@1 {
35			compatible = "arm,cortex-a53";
36			device_type = "cpu";
37			reg = <1>;
38			enable-method = "psci";
39			clocks = <&ccu CLK_CPUX>;
40			clock-latency-ns = <244144>; /* 8 32k periods */
41			#cooling-cells = <2>;
42		};
43
44		cpu2: cpu@2 {
45			compatible = "arm,cortex-a53";
46			device_type = "cpu";
47			reg = <2>;
48			enable-method = "psci";
49			clocks = <&ccu CLK_CPUX>;
50			clock-latency-ns = <244144>; /* 8 32k periods */
51			#cooling-cells = <2>;
52		};
53
54		cpu3: cpu@3 {
55			compatible = "arm,cortex-a53";
56			device_type = "cpu";
57			reg = <3>;
58			enable-method = "psci";
59			clocks = <&ccu CLK_CPUX>;
60			clock-latency-ns = <244144>; /* 8 32k periods */
61			#cooling-cells = <2>;
62		};
63	};
64
65	de: display-engine {
66		compatible = "allwinner,sun50i-h6-display-engine";
67		allwinner,pipelines = <&mixer0>;
68		status = "disabled";
69	};
70
71	osc24M: osc24M-clk {
72		#clock-cells = <0>;
73		compatible = "fixed-clock";
74		clock-frequency = <24000000>;
75		clock-output-names = "osc24M";
76	};
77
78	pmu {
79		compatible = "arm,cortex-a53-pmu";
80		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
81			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
82			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
83			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
84		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
85	};
86
87	psci {
88		compatible = "arm,psci-0.2";
89		method = "smc";
90	};
91
92	timer {
93		compatible = "arm,armv8-timer";
94		arm,no-tick-in-suspend;
95		interrupts = <GIC_PPI 13
96			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
97			     <GIC_PPI 14
98			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
99			     <GIC_PPI 11
100			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
101			     <GIC_PPI 10
102			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
103	};
104
105	soc {
106		compatible = "simple-bus";
107		#address-cells = <1>;
108		#size-cells = <1>;
109		ranges;
110
111		bus@1000000 {
112			compatible = "allwinner,sun50i-h6-de3",
113				     "allwinner,sun50i-a64-de2";
114			reg = <0x1000000 0x400000>;
115			allwinner,sram = <&de2_sram 1>;
116			#address-cells = <1>;
117			#size-cells = <1>;
118			ranges = <0 0x1000000 0x400000>;
119
120			display_clocks: clock@0 {
121				compatible = "allwinner,sun50i-h6-de3-clk";
122				reg = <0x0 0x10000>;
123				clocks = <&ccu CLK_BUS_DE>,
124					 <&ccu CLK_DE>;
125				clock-names = "bus",
126					      "mod";
127				resets = <&ccu RST_BUS_DE>;
128				#clock-cells = <1>;
129				#reset-cells = <1>;
130			};
131
132			mixer0: mixer@100000 {
133				compatible = "allwinner,sun50i-h6-de3-mixer-0";
134				reg = <0x100000 0x100000>;
135				clocks = <&display_clocks CLK_BUS_MIXER0>,
136					 <&display_clocks CLK_MIXER0>;
137				clock-names = "bus",
138					      "mod";
139				resets = <&display_clocks RST_MIXER0>;
140				iommus = <&iommu 0>;
141
142				ports {
143					#address-cells = <1>;
144					#size-cells = <0>;
145
146					mixer0_out: port@1 {
147						reg = <1>;
148
149						mixer0_out_tcon_top_mixer0: endpoint {
150							remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
151						};
152					};
153				};
154			};
155		};
156
157		video-codec-g2@1c00000 {
158			compatible = "allwinner,sun50i-h6-vpu-g2";
159			reg = <0x01c00000 0x1000>;
160			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
161			clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
162			clock-names = "bus", "mod";
163			resets = <&ccu RST_BUS_VP9>;
164			iommus = <&iommu 5>;
165		};
166
167		video-codec@1c0e000 {
168			compatible = "allwinner,sun50i-h6-video-engine";
169			reg = <0x01c0e000 0x2000>;
170			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
171				 <&ccu CLK_MBUS_VE>;
172			clock-names = "ahb", "mod", "ram";
173			resets = <&ccu RST_BUS_VE>;
174			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
175			allwinner,sram = <&ve_sram 1>;
176			iommus = <&iommu 3>;
177		};
178
179		gpu: gpu@1800000 {
180			compatible = "allwinner,sun50i-h6-mali",
181				     "arm,mali-t720";
182			reg = <0x01800000 0x4000>;
183			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
184				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
185				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
186			interrupt-names = "job", "mmu", "gpu";
187			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
188			clock-names = "core", "bus";
189			resets = <&ccu RST_BUS_GPU>;
190			#cooling-cells = <2>;
191			status = "disabled";
192		};
193
194		crypto: crypto@1904000 {
195			compatible = "allwinner,sun50i-h6-crypto";
196			reg = <0x01904000 0x1000>;
197			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
198			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>;
199			clock-names = "bus", "mod", "ram";
200			resets = <&ccu RST_BUS_CE>;
201		};
202
203		syscon: syscon@3000000 {
204			compatible = "allwinner,sun50i-h6-system-control",
205				     "allwinner,sun50i-a64-system-control";
206			reg = <0x03000000 0x1000>;
207			#address-cells = <1>;
208			#size-cells = <1>;
209			ranges;
210
211			sram_c: sram@28000 {
212				compatible = "mmio-sram";
213				reg = <0x00028000 0x1e000>;
214				#address-cells = <1>;
215				#size-cells = <1>;
216				ranges = <0 0x00028000 0x1e000>;
217
218				de2_sram: sram-section@0 {
219					compatible = "allwinner,sun50i-h6-sram-c",
220						     "allwinner,sun50i-a64-sram-c";
221					reg = <0x0000 0x1e000>;
222				};
223			};
224
225			sram_c1: sram@1a00000 {
226				compatible = "mmio-sram";
227				reg = <0x01a00000 0x200000>;
228				#address-cells = <1>;
229				#size-cells = <1>;
230				ranges = <0 0x01a00000 0x200000>;
231
232				ve_sram: sram-section@0 {
233					compatible = "allwinner,sun50i-h6-sram-c1",
234						     "allwinner,sun4i-a10-sram-c1";
235					reg = <0x000000 0x200000>;
236				};
237			};
238		};
239
240		ccu: clock@3001000 {
241			compatible = "allwinner,sun50i-h6-ccu";
242			reg = <0x03001000 0x1000>;
243			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
244			clock-names = "hosc", "losc", "iosc";
245			#clock-cells = <1>;
246			#reset-cells = <1>;
247		};
248
249		dma: dma-controller@3002000 {
250			compatible = "allwinner,sun50i-h6-dma";
251			reg = <0x03002000 0x1000>;
252			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
253			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
254			clock-names = "bus", "mbus";
255			dma-channels = <16>;
256			dma-requests = <46>;
257			resets = <&ccu RST_BUS_DMA>;
258			#dma-cells = <1>;
259		};
260
261		msgbox: mailbox@3003000 {
262			compatible = "allwinner,sun50i-h6-msgbox",
263				     "allwinner,sun6i-a31-msgbox";
264			reg = <0x03003000 0x1000>;
265			clocks = <&ccu CLK_BUS_MSGBOX>;
266			resets = <&ccu RST_BUS_MSGBOX>;
267			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
268			#mbox-cells = <1>;
269		};
270
271		sid: efuse@3006000 {
272			compatible = "allwinner,sun50i-h6-sid";
273			reg = <0x03006000 0x400>;
274			#address-cells = <1>;
275			#size-cells = <1>;
276
277			ths_calibration: thermal-sensor-calibration@14 {
278				reg = <0x14 0x8>;
279			};
280
281			cpu_speed_grade: cpu-speed-grade@1c {
282				reg = <0x1c 0x4>;
283			};
284		};
285
286		timer@3009000 {
287			compatible = "allwinner,sun50i-h6-timer",
288				     "allwinner,sun8i-a23-timer";
289			reg = <0x03009000 0xa0>;
290			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
291				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
292			clocks = <&osc24M>;
293		};
294
295		watchdog: watchdog@30090a0 {
296			compatible = "allwinner,sun50i-h6-wdt",
297				     "allwinner,sun6i-a31-wdt";
298			reg = <0x030090a0 0x20>;
299			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
300			clocks = <&osc24M>;
301			/* Broken on some H6 boards */
302			status = "disabled";
303		};
304
305		pwm: pwm@300a000 {
306			compatible = "allwinner,sun50i-h6-pwm";
307			reg = <0x0300a000 0x400>;
308			clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
309			clock-names = "mod", "bus";
310			resets = <&ccu RST_BUS_PWM>;
311			#pwm-cells = <3>;
312			status = "disabled";
313		};
314
315		pio: pinctrl@300b000 {
316			compatible = "allwinner,sun50i-h6-pinctrl";
317			reg = <0x0300b000 0x400>;
318			interrupt-parent = <&r_intc>;
319			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
320				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
321				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
322				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
323			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
324			clock-names = "apb", "hosc", "losc";
325			gpio-controller;
326			#gpio-cells = <3>;
327			interrupt-controller;
328			#interrupt-cells = <3>;
329
330			ext_rgmii_pins: rgmii-pins {
331				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
332				       "PD5", "PD7", "PD8", "PD9", "PD10",
333				       "PD11", "PD12", "PD13", "PD19", "PD20";
334				function = "emac";
335				drive-strength = <40>;
336			};
337
338			hdmi_pins: hdmi-pins {
339				pins = "PH8", "PH9", "PH10";
340				function = "hdmi";
341			};
342
343			i2c0_pins: i2c0-pins {
344				pins = "PD25", "PD26";
345				function = "i2c0";
346			};
347
348			i2c1_pins: i2c1-pins {
349				pins = "PH5", "PH6";
350				function = "i2c1";
351			};
352
353			i2c2_pins: i2c2-pins {
354				pins = "PD23", "PD24";
355				function = "i2c2";
356			};
357
358			mmc0_pins: mmc0-pins {
359				pins = "PF0", "PF1", "PF2", "PF3",
360				       "PF4", "PF5";
361				function = "mmc0";
362				drive-strength = <30>;
363				bias-pull-up;
364			};
365
366			/omit-if-no-ref/
367			mmc1_pins: mmc1-pins {
368				pins = "PG0", "PG1", "PG2", "PG3",
369				       "PG4", "PG5";
370				function = "mmc1";
371				drive-strength = <30>;
372				bias-pull-up;
373			};
374
375			mmc2_pins: mmc2-pins {
376				pins = "PC1", "PC4", "PC5", "PC6",
377				       "PC7", "PC8", "PC9", "PC10",
378				       "PC11", "PC12", "PC13", "PC14";
379				function = "mmc2";
380				drive-strength = <30>;
381				bias-pull-up;
382			};
383
384			/omit-if-no-ref/
385			spi0_pins: spi0-pins {
386				pins = "PC0", "PC2", "PC3";
387				function = "spi0";
388			};
389
390			/* pin shared with MMC2-CMD (eMMC) */
391			/omit-if-no-ref/
392			spi0_cs_pin: spi0-cs-pin {
393				pins = "PC5";
394				function = "spi0";
395			};
396
397			/omit-if-no-ref/
398			spi1_pins: spi1-pins {
399				pins = "PH4", "PH5", "PH6";
400				function = "spi1";
401			};
402
403			/omit-if-no-ref/
404			spi1_cs_pin: spi1-cs-pin {
405				pins = "PH3";
406				function = "spi1";
407			};
408
409			/omit-if-no-ref/
410			spdif_tx_pin: spdif-tx-pin {
411				pins = "PH7";
412				function = "spdif";
413			};
414
415			uart0_ph_pins: uart0-ph-pins {
416				pins = "PH0", "PH1";
417				function = "uart0";
418			};
419
420			uart1_pins: uart1-pins {
421				pins = "PG6", "PG7";
422				function = "uart1";
423			};
424
425			uart1_rts_cts_pins: uart1-rts-cts-pins {
426				pins = "PG8", "PG9";
427				function = "uart1";
428			};
429		};
430
431		gic: interrupt-controller@3021000 {
432			compatible = "arm,gic-400";
433			reg = <0x03021000 0x1000>,
434			      <0x03022000 0x2000>,
435			      <0x03024000 0x2000>,
436			      <0x03026000 0x2000>;
437			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
438			interrupt-controller;
439			#interrupt-cells = <3>;
440		};
441
442		iommu: iommu@30f0000 {
443			compatible = "allwinner,sun50i-h6-iommu";
444			reg = <0x030f0000 0x10000>;
445			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
446			clocks = <&ccu CLK_BUS_IOMMU>;
447			resets = <&ccu RST_BUS_IOMMU>;
448			#iommu-cells = <1>;
449		};
450
451		mmc0: mmc@4020000 {
452			compatible = "allwinner,sun50i-h6-mmc",
453				     "allwinner,sun50i-a64-mmc";
454			reg = <0x04020000 0x1000>;
455			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
456			clock-names = "ahb", "mmc";
457			resets = <&ccu RST_BUS_MMC0>;
458			reset-names = "ahb";
459			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
460			pinctrl-names = "default";
461			pinctrl-0 = <&mmc0_pins>;
462			max-frequency = <150000000>;
463			status = "disabled";
464			#address-cells = <1>;
465			#size-cells = <0>;
466		};
467
468		mmc1: mmc@4021000 {
469			compatible = "allwinner,sun50i-h6-mmc",
470				     "allwinner,sun50i-a64-mmc";
471			reg = <0x04021000 0x1000>;
472			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
473			clock-names = "ahb", "mmc";
474			resets = <&ccu RST_BUS_MMC1>;
475			reset-names = "ahb";
476			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
477			pinctrl-names = "default";
478			pinctrl-0 = <&mmc1_pins>;
479			max-frequency = <150000000>;
480			status = "disabled";
481			#address-cells = <1>;
482			#size-cells = <0>;
483		};
484
485		mmc2: mmc@4022000 {
486			compatible = "allwinner,sun50i-h6-emmc",
487				     "allwinner,sun50i-a64-emmc";
488			reg = <0x04022000 0x1000>;
489			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
490			clock-names = "ahb", "mmc";
491			resets = <&ccu RST_BUS_MMC2>;
492			reset-names = "ahb";
493			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
494			pinctrl-names = "default";
495			pinctrl-0 = <&mmc2_pins>;
496			max-frequency = <150000000>;
497			status = "disabled";
498			#address-cells = <1>;
499			#size-cells = <0>;
500		};
501
502		uart0: serial@5000000 {
503			compatible = "snps,dw-apb-uart";
504			reg = <0x05000000 0x400>;
505			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
506			reg-shift = <2>;
507			reg-io-width = <4>;
508			clocks = <&ccu CLK_BUS_UART0>;
509			resets = <&ccu RST_BUS_UART0>;
510			status = "disabled";
511		};
512
513		uart1: serial@5000400 {
514			compatible = "snps,dw-apb-uart";
515			reg = <0x05000400 0x400>;
516			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
517			reg-shift = <2>;
518			reg-io-width = <4>;
519			clocks = <&ccu CLK_BUS_UART1>;
520			resets = <&ccu RST_BUS_UART1>;
521			status = "disabled";
522		};
523
524		uart2: serial@5000800 {
525			compatible = "snps,dw-apb-uart";
526			reg = <0x05000800 0x400>;
527			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
528			reg-shift = <2>;
529			reg-io-width = <4>;
530			clocks = <&ccu CLK_BUS_UART2>;
531			resets = <&ccu RST_BUS_UART2>;
532			status = "disabled";
533		};
534
535		uart3: serial@5000c00 {
536			compatible = "snps,dw-apb-uart";
537			reg = <0x05000c00 0x400>;
538			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
539			reg-shift = <2>;
540			reg-io-width = <4>;
541			clocks = <&ccu CLK_BUS_UART3>;
542			resets = <&ccu RST_BUS_UART3>;
543			status = "disabled";
544		};
545
546		i2c0: i2c@5002000 {
547			compatible = "allwinner,sun50i-h6-i2c",
548				     "allwinner,sun6i-a31-i2c";
549			reg = <0x05002000 0x400>;
550			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
551			clocks = <&ccu CLK_BUS_I2C0>;
552			resets = <&ccu RST_BUS_I2C0>;
553			pinctrl-names = "default";
554			pinctrl-0 = <&i2c0_pins>;
555			status = "disabled";
556			#address-cells = <1>;
557			#size-cells = <0>;
558		};
559
560		i2c1: i2c@5002400 {
561			compatible = "allwinner,sun50i-h6-i2c",
562				     "allwinner,sun6i-a31-i2c";
563			reg = <0x05002400 0x400>;
564			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
565			clocks = <&ccu CLK_BUS_I2C1>;
566			resets = <&ccu RST_BUS_I2C1>;
567			pinctrl-names = "default";
568			pinctrl-0 = <&i2c1_pins>;
569			status = "disabled";
570			#address-cells = <1>;
571			#size-cells = <0>;
572		};
573
574		i2c2: i2c@5002800 {
575			compatible = "allwinner,sun50i-h6-i2c",
576				     "allwinner,sun6i-a31-i2c";
577			reg = <0x05002800 0x400>;
578			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
579			clocks = <&ccu CLK_BUS_I2C2>;
580			resets = <&ccu RST_BUS_I2C2>;
581			pinctrl-names = "default";
582			pinctrl-0 = <&i2c2_pins>;
583			status = "disabled";
584			#address-cells = <1>;
585			#size-cells = <0>;
586		};
587
588		spi0: spi@5010000 {
589			compatible = "allwinner,sun50i-h6-spi",
590				     "allwinner,sun8i-h3-spi";
591			reg = <0x05010000 0x1000>;
592			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
593			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
594			clock-names = "ahb", "mod";
595			dmas = <&dma 22>, <&dma 22>;
596			dma-names = "rx", "tx";
597			resets = <&ccu RST_BUS_SPI0>;
598			status = "disabled";
599			#address-cells = <1>;
600			#size-cells = <0>;
601		};
602
603		spi1: spi@5011000 {
604			compatible = "allwinner,sun50i-h6-spi",
605				     "allwinner,sun8i-h3-spi";
606			reg = <0x05011000 0x1000>;
607			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
608			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
609			clock-names = "ahb", "mod";
610			dmas = <&dma 23>, <&dma 23>;
611			dma-names = "rx", "tx";
612			resets = <&ccu RST_BUS_SPI1>;
613			status = "disabled";
614			#address-cells = <1>;
615			#size-cells = <0>;
616		};
617
618		emac: ethernet@5020000 {
619			compatible = "allwinner,sun50i-h6-emac",
620				     "allwinner,sun50i-a64-emac";
621			syscon = <&syscon>;
622			reg = <0x05020000 0x10000>;
623			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
624			interrupt-names = "macirq";
625			resets = <&ccu RST_BUS_EMAC>;
626			reset-names = "stmmaceth";
627			clocks = <&ccu CLK_BUS_EMAC>;
628			clock-names = "stmmaceth";
629			status = "disabled";
630
631			mdio: mdio {
632				compatible = "snps,dwmac-mdio";
633				#address-cells = <1>;
634				#size-cells = <0>;
635			};
636		};
637
638		i2s1: i2s@5091000 {
639			#sound-dai-cells = <0>;
640			compatible = "allwinner,sun50i-h6-i2s";
641			reg = <0x05091000 0x1000>;
642			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
643			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
644			clock-names = "apb", "mod";
645			dmas = <&dma 4>, <&dma 4>;
646			resets = <&ccu RST_BUS_I2S1>;
647			dma-names = "rx", "tx";
648			status = "disabled";
649		};
650
651		spdif: spdif@5093000 {
652			#sound-dai-cells = <0>;
653			compatible = "allwinner,sun50i-h6-spdif";
654			reg = <0x05093000 0x400>;
655			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
656			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
657			clock-names = "apb", "spdif";
658			resets = <&ccu RST_BUS_SPDIF>;
659			dmas = <&dma 2>, <&dma 2>;
660			dma-names = "rx", "tx";
661			status = "disabled";
662		};
663
664		usb2otg: usb@5100000 {
665			compatible = "allwinner,sun50i-h6-musb",
666				     "allwinner,sun8i-a33-musb";
667			reg = <0x05100000 0x0400>;
668			clocks = <&ccu CLK_BUS_OTG>;
669			resets = <&ccu RST_BUS_OTG>;
670			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
671			interrupt-names = "mc";
672			phys = <&usb2phy 0>;
673			phy-names = "usb";
674			extcon = <&usb2phy 0>;
675			status = "disabled";
676		};
677
678		usb2phy: phy@5100400 {
679			compatible = "allwinner,sun50i-h6-usb-phy";
680			reg = <0x05100400 0x24>,
681			      <0x05101800 0x4>,
682			      <0x05311800 0x4>;
683			reg-names = "phy_ctrl",
684				    "pmu0",
685				    "pmu3";
686			clocks = <&ccu CLK_USB_PHY0>,
687				 <&ccu CLK_USB_PHY3>;
688			clock-names = "usb0_phy",
689				      "usb3_phy";
690			resets = <&ccu RST_USB_PHY0>,
691				 <&ccu RST_USB_PHY3>;
692			reset-names = "usb0_reset",
693				      "usb3_reset";
694			status = "disabled";
695			#phy-cells = <1>;
696		};
697
698		ehci0: usb@5101000 {
699			compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
700			reg = <0x05101000 0x100>;
701			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
702			clocks = <&ccu CLK_BUS_OHCI0>,
703				 <&ccu CLK_BUS_EHCI0>,
704				 <&ccu CLK_USB_OHCI0>;
705			resets = <&ccu RST_BUS_OHCI0>,
706				 <&ccu RST_BUS_EHCI0>;
707			phys = <&usb2phy 0>;
708			phy-names = "usb";
709			status = "disabled";
710		};
711
712		ohci0: usb@5101400 {
713			compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
714			reg = <0x05101400 0x100>;
715			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
716			clocks = <&ccu CLK_BUS_OHCI0>,
717				 <&ccu CLK_USB_OHCI0>;
718			resets = <&ccu RST_BUS_OHCI0>;
719			phys = <&usb2phy 0>;
720			phy-names = "usb";
721			status = "disabled";
722		};
723
724		dwc3: usb@5200000 {
725			compatible = "snps,dwc3";
726			reg = <0x05200000 0x10000>;
727			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
728			clocks = <&ccu CLK_BUS_XHCI>,
729				 <&ccu CLK_BUS_XHCI>,
730				 <&rtc CLK_OSC32K>;
731			clock-names = "ref", "bus_early", "suspend";
732			resets = <&ccu RST_BUS_XHCI>;
733			/*
734			 * The datasheet of the chip doesn't declare the
735			 * peripheral function, and there's no boards known
736			 * to have a USB Type-B port routed to the port.
737			 * In addition, no one has tested the peripheral
738			 * function yet.
739			 * So set the dr_mode to "host" in the DTSI file.
740			 */
741			dr_mode = "host";
742			phys = <&usb3phy>;
743			phy-names = "usb3-phy";
744			status = "disabled";
745		};
746
747		usb3phy: phy@5210000 {
748			compatible = "allwinner,sun50i-h6-usb3-phy";
749			reg = <0x5210000 0x10000>;
750			clocks = <&ccu CLK_USB_PHY1>;
751			resets = <&ccu RST_USB_PHY1>;
752			#phy-cells = <0>;
753			status = "disabled";
754		};
755
756		ehci3: usb@5311000 {
757			compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
758			reg = <0x05311000 0x100>;
759			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
760			clocks = <&ccu CLK_BUS_OHCI3>,
761				 <&ccu CLK_BUS_EHCI3>,
762				 <&ccu CLK_USB_OHCI3>;
763			resets = <&ccu RST_BUS_OHCI3>,
764				 <&ccu RST_BUS_EHCI3>;
765			phys = <&usb2phy 3>;
766			phy-names = "usb";
767			status = "disabled";
768		};
769
770		ohci3: usb@5311400 {
771			compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
772			reg = <0x05311400 0x100>;
773			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
774			clocks = <&ccu CLK_BUS_OHCI3>,
775				 <&ccu CLK_USB_OHCI3>;
776			resets = <&ccu RST_BUS_OHCI3>;
777			phys = <&usb2phy 3>;
778			phy-names = "usb";
779			status = "disabled";
780		};
781
782		hdmi: hdmi@6000000 {
783			compatible = "allwinner,sun50i-h6-dw-hdmi";
784			reg = <0x06000000 0x10000>;
785			reg-io-width = <1>;
786			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
787			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
788				 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
789				 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
790			clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
791				      "hdcp-bus";
792			resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
793			reset-names = "ctrl", "hdcp";
794			phys = <&hdmi_phy>;
795			phy-names = "phy";
796			pinctrl-names = "default";
797			pinctrl-0 = <&hdmi_pins>;
798			status = "disabled";
799
800			ports {
801				#address-cells = <1>;
802				#size-cells = <0>;
803
804				hdmi_in: port@0 {
805					reg = <0>;
806
807					hdmi_in_tcon_top: endpoint {
808						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
809					};
810				};
811
812				hdmi_out: port@1 {
813					reg = <1>;
814				};
815			};
816		};
817
818		hdmi_phy: hdmi-phy@6010000 {
819			compatible = "allwinner,sun50i-h6-hdmi-phy";
820			reg = <0x06010000 0x10000>;
821			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
822			clock-names = "bus", "mod";
823			resets = <&ccu RST_BUS_HDMI>;
824			reset-names = "phy";
825			#phy-cells = <0>;
826		};
827
828		tcon_top: tcon-top@6510000 {
829			compatible = "allwinner,sun50i-h6-tcon-top";
830			reg = <0x06510000 0x1000>;
831			clocks = <&ccu CLK_BUS_TCON_TOP>,
832				 <&ccu CLK_TCON_TV0>;
833			clock-names = "bus",
834				      "tcon-tv0";
835			clock-output-names = "tcon-top-tv0";
836			resets = <&ccu RST_BUS_TCON_TOP>;
837			#clock-cells = <1>;
838
839			ports {
840				#address-cells = <1>;
841				#size-cells = <0>;
842
843				tcon_top_mixer0_in: port@0 {
844					#address-cells = <1>;
845					#size-cells = <0>;
846					reg = <0>;
847
848					tcon_top_mixer0_in_mixer0: endpoint@0 {
849						reg = <0>;
850						remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
851					};
852				};
853
854				tcon_top_mixer0_out: port@1 {
855					#address-cells = <1>;
856					#size-cells = <0>;
857					reg = <1>;
858
859					tcon_top_mixer0_out_tcon_tv: endpoint@2 {
860						reg = <2>;
861						remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
862					};
863				};
864
865				tcon_top_hdmi_in: port@4 {
866					#address-cells = <1>;
867					#size-cells = <0>;
868					reg = <4>;
869
870					tcon_top_hdmi_in_tcon_tv: endpoint@0 {
871						reg = <0>;
872						remote-endpoint = <&tcon_tv_out_tcon_top>;
873					};
874				};
875
876				tcon_top_hdmi_out: port@5 {
877					reg = <5>;
878
879					tcon_top_hdmi_out_hdmi: endpoint {
880						remote-endpoint = <&hdmi_in_tcon_top>;
881					};
882				};
883			};
884		};
885
886		tcon_tv: lcd-controller@6515000 {
887			compatible = "allwinner,sun50i-h6-tcon-tv",
888				     "allwinner,sun8i-r40-tcon-tv";
889			reg = <0x06515000 0x1000>;
890			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
891			clocks = <&ccu CLK_BUS_TCON_TV0>,
892				 <&tcon_top CLK_TCON_TOP_TV0>;
893			clock-names = "ahb",
894				      "tcon-ch1";
895			resets = <&ccu RST_BUS_TCON_TV0>;
896			reset-names = "lcd";
897
898			ports {
899				#address-cells = <1>;
900				#size-cells = <0>;
901
902				tcon_tv_in: port@0 {
903					reg = <0>;
904
905					tcon_tv_in_tcon_top_mixer0: endpoint {
906						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
907					};
908				};
909
910				tcon_tv_out: port@1 {
911					#address-cells = <1>;
912					#size-cells = <0>;
913					reg = <1>;
914
915					tcon_tv_out_tcon_top: endpoint@1 {
916						reg = <1>;
917						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
918					};
919				};
920			};
921		};
922
923		rtc: rtc@7000000 {
924			compatible = "allwinner,sun50i-h6-rtc";
925			reg = <0x07000000 0x400>;
926			interrupt-parent = <&r_intc>;
927			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
928				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
929			clock-output-names = "osc32k", "osc32k-out", "iosc";
930			#clock-cells = <1>;
931		};
932
933		r_ccu: clock@7010000 {
934			compatible = "allwinner,sun50i-h6-r-ccu";
935			reg = <0x07010000 0x400>;
936			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
937				 <&ccu CLK_PLL_PERIPH0>;
938			clock-names = "hosc", "losc", "iosc", "pll-periph";
939			#clock-cells = <1>;
940			#reset-cells = <1>;
941		};
942
943		r_watchdog: watchdog@7020400 {
944			compatible = "allwinner,sun50i-h6-wdt",
945				     "allwinner,sun6i-a31-wdt";
946			reg = <0x07020400 0x20>;
947			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
948			clocks = <&osc24M>;
949		};
950
951		r_intc: interrupt-controller@7021000 {
952			compatible = "allwinner,sun50i-h6-r-intc";
953			interrupt-controller;
954			#interrupt-cells = <3>;
955			reg = <0x07021000 0x400>;
956			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
957		};
958
959		r_pio: pinctrl@7022000 {
960			compatible = "allwinner,sun50i-h6-r-pinctrl";
961			reg = <0x07022000 0x400>;
962			interrupt-parent = <&r_intc>;
963			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
964				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
965			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
966				 <&rtc CLK_OSC32K>;
967			clock-names = "apb", "hosc", "losc";
968			gpio-controller;
969			#gpio-cells = <3>;
970			interrupt-controller;
971			#interrupt-cells = <3>;
972
973			r_i2c_pins: r-i2c-pins {
974				pins = "PL0", "PL1";
975				function = "s_i2c";
976			};
977
978			r_ir_rx_pin: r-ir-rx-pin {
979				pins = "PL9";
980				function = "s_cir_rx";
981			};
982
983			r_rsb_pins: r-rsb-pins {
984				pins = "PL0", "PL1";
985				function = "s_rsb";
986			};
987		};
988
989		r_ir: ir@7040000 {
990				compatible = "allwinner,sun50i-h6-ir",
991					     "allwinner,sun6i-a31-ir";
992				reg = <0x07040000 0x400>;
993				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
994				clocks = <&r_ccu CLK_R_APB1_IR>,
995					 <&r_ccu CLK_IR>;
996				clock-names = "apb", "ir";
997				resets = <&r_ccu RST_R_APB1_IR>;
998				pinctrl-names = "default";
999				pinctrl-0 = <&r_ir_rx_pin>;
1000				status = "disabled";
1001		};
1002
1003		r_i2c: i2c@7081400 {
1004			compatible = "allwinner,sun50i-h6-i2c",
1005				     "allwinner,sun6i-a31-i2c";
1006			reg = <0x07081400 0x400>;
1007			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1008			clocks = <&r_ccu CLK_R_APB2_I2C>;
1009			resets = <&r_ccu RST_R_APB2_I2C>;
1010			pinctrl-names = "default";
1011			pinctrl-0 = <&r_i2c_pins>;
1012			status = "disabled";
1013			#address-cells = <1>;
1014			#size-cells = <0>;
1015		};
1016
1017		r_rsb: rsb@7083000 {
1018			compatible = "allwinner,sun8i-a23-rsb";
1019			reg = <0x07083000 0x400>;
1020			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1021			clocks = <&r_ccu CLK_R_APB2_RSB>;
1022			clock-frequency = <3000000>;
1023			resets = <&r_ccu RST_R_APB2_RSB>;
1024			pinctrl-names = "default";
1025			pinctrl-0 = <&r_rsb_pins>;
1026			status = "disabled";
1027			#address-cells = <1>;
1028			#size-cells = <0>;
1029		};
1030
1031		ths: thermal-sensor@5070400 {
1032			compatible = "allwinner,sun50i-h6-ths";
1033			reg = <0x05070400 0x100>;
1034			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1035			clocks = <&ccu CLK_BUS_THS>;
1036			clock-names = "bus";
1037			resets = <&ccu RST_BUS_THS>;
1038			nvmem-cells = <&ths_calibration>;
1039			nvmem-cell-names = "calibration";
1040			#thermal-sensor-cells = <1>;
1041		};
1042	};
1043
1044	thermal-zones {
1045		cpu-thermal {
1046			polling-delay-passive = <0>;
1047			polling-delay = <0>;
1048			thermal-sensors = <&ths 0>;
1049
1050			trips {
1051				cpu_alert: cpu-alert {
1052					temperature = <85000>;
1053					hysteresis = <2000>;
1054					type = "passive";
1055				};
1056
1057				cpu-crit {
1058					temperature = <100000>;
1059					hysteresis = <0>;
1060					type = "critical";
1061				};
1062			};
1063
1064			cooling-maps {
1065				map0 {
1066					trip = <&cpu_alert>;
1067					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1068							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1069							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1070							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1071				};
1072			};
1073		};
1074
1075		gpu-thermal {
1076			polling-delay-passive = <1000>;
1077			polling-delay = <2000>;
1078			thermal-sensors = <&ths 1>;
1079
1080			trips {
1081				gpu_alert0: gpu-alert-0 {
1082					temperature = <95000>;
1083					hysteresis = <2000>;
1084					type = "passive";
1085				};
1086
1087				gpu_alert1: gpu-alert-1 {
1088					temperature = <100000>;
1089					hysteresis = <2000>;
1090					type = "passive";
1091				};
1092
1093				gpu_alert2: gpu-alert-2 {
1094					temperature = <105000>;
1095					hysteresis = <2000>;
1096					type = "passive";
1097				};
1098
1099				gpu-crit {
1100					temperature = <115000>;
1101					hysteresis = <0>;
1102					type = "critical";
1103				};
1104			};
1105
1106			cooling-maps {
1107				// Forbid the GPU to go over 756MHz
1108				map0 {
1109					trip = <&gpu_alert0>;
1110					cooling-device = <&gpu 1 THERMAL_NO_LIMIT>;
1111				};
1112
1113				// Forbid the GPU to go over 624MHz
1114				map1 {
1115					trip = <&gpu_alert1>;
1116					cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
1117				};
1118
1119				// Forbid the GPU to go over 576MHz
1120				map2 {
1121					trip = <&gpu_alert2>;
1122					cooling-device = <&gpu 3 THERMAL_NO_LIMIT>;
1123				};
1124			};
1125		};
1126	};
1127};
1128