1# SPDX-License-Identifier: GPL-2.0-only 2menu "Platform selection" 3 4config ARCH_ACTIONS 5 bool "Actions Semi Platforms" 6 select OWL_TIMER 7 select PINCTRL 8 help 9 This enables support for the Actions Semiconductor S900 SoC family. 10 11config ARCH_SUNXI 12 bool "Allwinner sunxi 64-bit SoC Family" 13 select ARCH_HAS_RESET_CONTROLLER 14 select PINCTRL 15 select RESET_CONTROLLER 16 select SUN4I_TIMER 17 select SUN6I_R_INTC 18 select SUNXI_NMI_INTC 19 help 20 This enables support for Allwinner sunxi based SoCs like the A64. 21 22config ARCH_ALPINE 23 bool "Annapurna Labs Alpine platform" 24 select ALPINE_MSI if PCI 25 help 26 This enables support for the Annapurna Labs Alpine 27 Soc family. 28 29config ARCH_APPLE 30 bool "Apple Silicon SoC family" 31 select APPLE_AIC 32 help 33 This enables support for Apple's in-house ARM SoC family, starting 34 with the Apple M1. 35 36menuconfig ARCH_BCM 37 bool "Broadcom SoC Support" 38 39if ARCH_BCM 40 41config ARCH_BCM2835 42 bool "Broadcom BCM2835 family" 43 select TIMER_OF 44 select GPIOLIB 45 select MFD_CORE 46 select PINCTRL 47 select PINCTRL_BCM2835 48 select ARM_AMBA 49 select ARM_GIC 50 select ARM_TIMER_SP804 51 help 52 This enables support for the Broadcom BCM2837 and BCM2711 SoC. 53 These SoCs are used in the Raspberry Pi 3 and 4 devices. 54 55config ARCH_BCM_IPROC 56 bool "Broadcom iProc SoC Family" 57 select COMMON_CLK_IPROC 58 select GPIOLIB 59 select PINCTRL 60 help 61 This enables support for Broadcom iProc based SoCs 62 63config ARCH_BCMBCA 64 bool "Broadcom Broadband Carrier Access (BCA) origin SoC" 65 select GPIOLIB 66 help 67 Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based 68 BCA chipset. 69 70 This enables support for Broadcom BCA ARM-based broadband chipsets, 71 including the DSL, PON and Wireless family of chips. 72 73config ARCH_BRCMSTB 74 bool "Broadcom Set-Top-Box SoCs" 75 select ARCH_HAS_RESET_CONTROLLER 76 select GENERIC_IRQ_CHIP 77 select PINCTRL 78 help 79 This enables support for Broadcom's ARMv8 Set Top Box SoCs 80 81endif 82 83config ARCH_BERLIN 84 bool "Marvell Berlin SoC Family" 85 select DW_APB_ICTL 86 select DW_APB_TIMER_OF 87 select GPIOLIB 88 select PINCTRL 89 help 90 This enables support for Marvell Berlin SoC Family 91 92config ARCH_BITMAIN 93 bool "Bitmain SoC Platforms" 94 help 95 This enables support for the Bitmain SoC Family. 96 97config ARCH_EXYNOS 98 bool "Samsung Exynos SoC family" 99 select COMMON_CLK_SAMSUNG 100 select CLKSRC_EXYNOS_MCT 101 select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS 102 select EXYNOS_PMU 103 select PINCTRL 104 select PINCTRL_EXYNOS 105 select PM_GENERIC_DOMAINS if PM 106 select SOC_SAMSUNG 107 help 108 This enables support for ARMv8 based Samsung Exynos SoC family. 109 110config ARCH_SPARX5 111 bool "Microchip Sparx5 SoC family" 112 select PINCTRL 113 select DW_APB_TIMER_OF 114 help 115 This enables support for the Microchip Sparx5 ARMv8-based 116 SoC family of TSN-capable gigabit switches. 117 118 The SparX-5 Ethernet switch family provides a rich set of 119 switching features such as advanced TCAM-based VLAN and QoS 120 processing enabling delivery of differentiated services, and 121 security through TCAM-based frame processing using versatile 122 content aware processor (VCAP). 123 124config ARCH_K3 125 bool "Texas Instruments Inc. K3 multicore SoC architecture" 126 select PM_GENERIC_DOMAINS if PM 127 select MAILBOX 128 select SOC_TI 129 select TI_MESSAGE_MANAGER 130 select TI_SCI_PROTOCOL 131 select TI_SCI_INTR_IRQCHIP 132 select TI_SCI_INTA_IRQCHIP 133 select TI_K3_SOCINFO 134 help 135 This enables support for Texas Instruments' K3 multicore SoC 136 architecture. 137 138config ARCH_LG1K 139 bool "LG Electronics LG1K SoC Family" 140 help 141 This enables support for LG Electronics LG1K SoC Family 142 143config ARCH_HISI 144 bool "Hisilicon SoC Family" 145 select ARM_TIMER_SP804 146 select HISILICON_IRQ_MBIGEN if PCI 147 select PINCTRL 148 help 149 This enables support for Hisilicon ARMv8 SoC family 150 151config ARCH_KEEMBAY 152 bool "Keem Bay SoC" 153 help 154 This enables support for Intel Movidius SoC code-named Keem Bay. 155 156config ARCH_MEDIATEK 157 bool "MediaTek SoC Family" 158 select ARM_GIC 159 select PINCTRL 160 select MTK_TIMER 161 help 162 This enables support for MediaTek MT27xx, MT65xx, MT76xx 163 & MT81xx ARMv8 SoCs 164 165config ARCH_MESON 166 bool "Amlogic Platforms" 167 help 168 This enables support for the arm64 based Amlogic SoCs 169 such as the s905, S905X/D, S912, A113X/D or S905X/D2 170 171config ARCH_MVEBU 172 bool "Marvell EBU SoC Family" 173 select ARMADA_AP806_SYSCON 174 select ARMADA_CP110_SYSCON 175 select ARMADA_37XX_CLK 176 select GPIOLIB 177 select GPIOLIB_IRQCHIP 178 select MVEBU_GICP 179 select MVEBU_ICU 180 select MVEBU_ODMI 181 select MVEBU_PIC 182 select MVEBU_SEI 183 select OF_GPIO 184 select PINCTRL 185 select PINCTRL_ARMADA_37XX 186 select PINCTRL_ARMADA_AP806 187 select PINCTRL_ARMADA_CP110 188 select PINCTRL_AC5 189 help 190 This enables support for Marvell EBU family, including: 191 - Armada 3700 SoC Family 192 - Armada 7K SoC Family 193 - Armada 8K SoC Family 194 - 98DX2530 SoC Family 195 196menuconfig ARCH_NXP 197 bool "NXP SoC support" 198 199if ARCH_NXP 200 201config ARCH_LAYERSCAPE 202 bool "Freescale Layerscape SoC family" 203 select EDAC_SUPPORT 204 help 205 This enables support for the Freescale Layerscape SoC family. 206 207config ARCH_MXC 208 bool "NXP i.MX SoC family" 209 select ARM64_ERRATUM_843419 210 select ARM64_ERRATUM_845719 if COMPAT 211 select IMX_GPCV2 212 select IMX_GPCV2_PM_DOMAINS 213 select PM 214 select PM_GENERIC_DOMAINS 215 select SOC_BUS 216 select TIMER_IMX_SYS_CTR 217 help 218 This enables support for the ARMv8 based SoCs in the 219 NXP i.MX family. 220 221config ARCH_S32 222 bool "NXP S32 SoC Family" 223 help 224 This enables support for the NXP S32 family of processors. 225 226endif 227 228config ARCH_MA35 229 bool "Nuvoton MA35 Architecture" 230 select GPIOLIB 231 select PINCTRL 232 select RESET_CONTROLLER 233 help 234 This enables support for the ARMv8 based Nuvoton MA35 series SoCs. 235 236config ARCH_NPCM 237 bool "Nuvoton NPCM Architecture" 238 select PINCTRL 239 select GPIOLIB 240 select NPCM7XX_TIMER 241 select RESET_CONTROLLER 242 select MFD_SYSCON 243 help 244 General support for NPCM8xx BMC (Arbel). 245 Nuvoton NPCM8xx BMC based on the Cortex A35. 246 247config ARCH_QCOM 248 bool "Qualcomm Platforms" 249 select GPIOLIB 250 select PINCTRL 251 help 252 This enables support for the ARMv8 based Qualcomm chipsets. 253 254config ARCH_REALTEK 255 bool "Realtek Platforms" 256 select RESET_CONTROLLER 257 help 258 This enables support for the ARMv8 based Realtek chipsets, 259 like the RTD1295. 260 261config ARCH_RENESAS 262 bool "Renesas SoC Platforms" 263 help 264 This enables support for the ARMv8 based Renesas SoCs. 265 266config ARCH_ROCKCHIP 267 bool "Rockchip Platforms" 268 select ARCH_HAS_RESET_CONTROLLER 269 select PINCTRL 270 select PM 271 select ROCKCHIP_TIMER 272 help 273 This enables support for the ARMv8 based Rockchip chipsets, 274 like the RK3368. 275 276config ARCH_SEATTLE 277 bool "AMD Seattle SoC Family" 278 help 279 This enables support for AMD Seattle SOC Family 280 281config ARCH_INTEL_SOCFPGA 282 bool "Intel's SoCFPGA ARMv8 Families" 283 help 284 This enables support for Intel's SoCFPGA ARMv8 families: 285 Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform, 286 Agilex and eASIC N5X. 287 288config ARCH_STM32 289 bool "STMicroelectronics STM32 SoC Family" 290 select GPIOLIB 291 select PINCTRL 292 select PINCTRL_STM32MP257 293 select ARM_SMC_MBOX 294 select ARM_SCMI_PROTOCOL 295 select COMMON_CLK_SCMI 296 help 297 This enables support for ARMv8 based STMicroelectronics 298 STM32 family, including: 299 - STM32MP25: 300 - STM32MP251, STM32MP253, STM32MP255 and STM32MP257. 301 302config ARCH_SYNQUACER 303 bool "Socionext SynQuacer SoC Family" 304 select IRQ_FASTEOI_HIERARCHY_HANDLERS 305 306config ARCH_TEGRA 307 bool "NVIDIA Tegra SoC Family" 308 select ARCH_HAS_RESET_CONTROLLER 309 select ARM_GIC_PM 310 select CLKSRC_MMIO 311 select TIMER_OF 312 select GPIOLIB 313 select PINCTRL 314 select PM 315 select PM_GENERIC_DOMAINS 316 select RESET_CONTROLLER 317 help 318 This enables support for the NVIDIA Tegra SoC family. 319 320config ARCH_TESLA_FSD 321 bool "Tesla platform" 322 depends on ARCH_EXYNOS 323 help 324 Support for ARMv8 based Tesla platforms. 325 326config ARCH_SPRD 327 bool "Spreadtrum SoC platform" 328 help 329 Support for Spreadtrum ARM based SoCs 330 331config ARCH_THUNDER 332 bool "Cavium Inc. Thunder SoC Family" 333 help 334 This enables support for Cavium's Thunder Family of SoCs. 335 336config ARCH_THUNDER2 337 bool "Cavium ThunderX2 Server Processors" 338 select GPIOLIB 339 help 340 This enables support for Cavium's ThunderX2 CN99XX family of 341 server processors. 342 343config ARCH_UNIPHIER 344 bool "Socionext UniPhier SoC Family" 345 select ARCH_HAS_RESET_CONTROLLER 346 select PINCTRL 347 select RESET_CONTROLLER 348 help 349 This enables support for Socionext UniPhier SoC family. 350 351config ARCH_VEXPRESS 352 bool "ARMv8 software model (Versatile Express)" 353 select GPIOLIB 354 select PM 355 select PM_GENERIC_DOMAINS 356 help 357 This enables support for the ARMv8 software model (Versatile 358 Express). 359 360config ARCH_VISCONTI 361 bool "Toshiba Visconti SoC Family" 362 select PINCTRL 363 select PINCTRL_VISCONTI 364 help 365 This enables support for Toshiba Visconti SoCs Family. 366 367config ARCH_XGENE 368 bool "AppliedMicro X-Gene SOC Family" 369 help 370 This enables support for AppliedMicro X-Gene SOC Family 371 372config ARCH_ZYNQMP 373 bool "Xilinx ZynqMP Family" 374 help 375 This enables support for Xilinx ZynqMP Family 376 377endmenu # "Platform selection" 378