1// SPDX-License-Identifier: GPL-2.0 2#include <dt-bindings/input/input.h> 3 4#include "qcom-msm8960.dtsi" 5#include "pm8921.dtsi" 6 7/ { 8 model = "Qualcomm MSM8960 CDP"; 9 compatible = "qcom,msm8960-cdp", "qcom,msm8960"; 10 11 aliases { 12 serial0 = &gsbi5_serial; 13 }; 14 15 chosen { 16 stdout-path = "serial0:115200n8"; 17 }; 18 19 ext_l2: gpio-regulator { 20 compatible = "regulator-fixed"; 21 regulator-name = "ext_l2"; 22 gpio = <&msmgpio 91 0>; 23 startup-delay-us = <10000>; 24 enable-active-high; 25 }; 26}; 27 28&gsbi1 { 29 qcom,mode = <GSBI_PROT_SPI>; 30 pinctrl-names = "default"; 31 pinctrl-0 = <&spi1_default>; 32 status = "okay"; 33}; 34 35&gsbi1_spi { 36 status = "okay"; 37 38 ethernet@0 { 39 compatible = "micrel,ks8851"; 40 reg = <0>; 41 interrupt-parent = <&msmgpio>; 42 interrupts = <90 IRQ_TYPE_LEVEL_LOW>; 43 spi-max-frequency = <5400000>; 44 vdd-supply = <&ext_l2>; 45 vdd-io-supply = <&pm8921_lvs6>; 46 reset-gpios = <&msmgpio 89 0>; 47 }; 48}; 49 50&gsbi5 { 51 qcom,mode = <GSBI_PROT_I2C_UART>; 52 status = "okay"; 53}; 54 55&gsbi5_serial { 56 status = "okay"; 57}; 58 59&msmgpio { 60 spi1_default: spi1-default-state { 61 mosi-pins { 62 pins = "gpio6"; 63 function = "gsbi1"; 64 drive-strength = <12>; 65 bias-disable; 66 }; 67 68 miso-pins { 69 pins = "gpio7"; 70 function = "gsbi1"; 71 drive-strength = <12>; 72 bias-disable; 73 }; 74 75 cs-pins { 76 pins = "gpio8"; 77 function = "gsbi1"; 78 drive-strength = <12>; 79 bias-disable; 80 output-low; 81 }; 82 83 clk-pins { 84 pins = "gpio9"; 85 function = "gsbi1"; 86 drive-strength = <12>; 87 bias-disable; 88 }; 89 }; 90}; 91 92&pm8921 { 93 interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; 94}; 95 96&pm8921_keypad { 97 linux,keymap = < 98 MATRIX_KEY(0, 0, KEY_VOLUMEUP) 99 MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) 100 MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) 101 MATRIX_KEY(0, 3, KEY_CAMERA) 102 >; 103 keypad,num-rows = <1>; 104 keypad,num-columns = <5>; 105 106 status = "okay"; 107}; 108 109&rpm { 110 regulators { 111 compatible = "qcom,rpm-pm8921-regulators"; 112 vin_lvs1_3_6-supply = <&pm8921_s4>; 113 vin_lvs2-supply = <&pm8921_s4>; 114 vin_lvs4_5_7-supply = <&pm8921_s4>; 115 vdd_ncp-supply = <&pm8921_l6>; 116 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; 117 vdd_l21_l23_l29-supply = <&pm8921_s8>; 118 vdd_l24-supply = <&pm8921_s1>; 119 vdd_l25-supply = <&pm8921_s1>; 120 vdd_l27-supply = <&pm8921_s7>; 121 vdd_l28-supply = <&pm8921_s7>; 122 123 /* Buck SMPS */ 124 pm8921_s1: s1 { 125 regulator-always-on; 126 regulator-min-microvolt = <1225000>; 127 regulator-max-microvolt = <1225000>; 128 qcom,switch-mode-frequency = <3200000>; 129 bias-pull-down; 130 }; 131 132 pm8921_s2: s2 { 133 regulator-min-microvolt = <1300000>; 134 regulator-max-microvolt = <1300000>; 135 qcom,switch-mode-frequency = <1600000>; 136 bias-pull-down; 137 }; 138 139 pm8921_s3: s3 { 140 regulator-min-microvolt = <500000>; 141 regulator-max-microvolt = <1150000>; 142 qcom,switch-mode-frequency = <4800000>; 143 bias-pull-down; 144 }; 145 146 pm8921_s4: s4 { 147 regulator-always-on; 148 regulator-min-microvolt = <1800000>; 149 regulator-max-microvolt = <1800000>; 150 qcom,switch-mode-frequency = <1600000>; 151 bias-pull-down; 152 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; 153 }; 154 155 pm8921_s7: s7 { 156 regulator-min-microvolt = <1150000>; 157 regulator-max-microvolt = <1150000>; 158 qcom,switch-mode-frequency = <3200000>; 159 bias-pull-down; 160 }; 161 162 pm8921_s8: s8 { 163 regulator-always-on; 164 regulator-min-microvolt = <2050000>; 165 regulator-max-microvolt = <2050000>; 166 qcom,switch-mode-frequency = <1600000>; 167 bias-pull-down; 168 }; 169 170 /* PMOS LDO */ 171 pm8921_l1: l1 { 172 regulator-always-on; 173 regulator-min-microvolt = <1050000>; 174 regulator-max-microvolt = <1050000>; 175 bias-pull-down; 176 }; 177 178 pm8921_l2: l2 { 179 regulator-min-microvolt = <1200000>; 180 regulator-max-microvolt = <1200000>; 181 bias-pull-down; 182 }; 183 184 pm8921_l3: l3 { 185 regulator-min-microvolt = <3075000>; 186 regulator-max-microvolt = <3075000>; 187 bias-pull-down; 188 }; 189 190 pm8921_l4: l4 { 191 regulator-always-on; 192 regulator-min-microvolt = <1800000>; 193 regulator-max-microvolt = <1800000>; 194 bias-pull-down; 195 }; 196 197 pm8921_l5: l5 { 198 regulator-min-microvolt = <2950000>; 199 regulator-max-microvolt = <2950000>; 200 bias-pull-down; 201 }; 202 203 pm8921_l6: l6 { 204 regulator-min-microvolt = <2950000>; 205 regulator-max-microvolt = <2950000>; 206 bias-pull-down; 207 }; 208 209 pm8921_l7: l7 { 210 regulator-always-on; 211 regulator-min-microvolt = <1850000>; 212 regulator-max-microvolt = <2950000>; 213 bias-pull-down; 214 }; 215 216 pm8921_l8: l8 { 217 regulator-min-microvolt = <2800000>; 218 regulator-max-microvolt = <3000000>; 219 bias-pull-down; 220 }; 221 222 pm8921_l9: l9 { 223 regulator-min-microvolt = <3000000>; 224 regulator-max-microvolt = <3000000>; 225 bias-pull-down; 226 }; 227 228 pm8921_l10: l10 { 229 regulator-min-microvolt = <3000000>; 230 regulator-max-microvolt = <3000000>; 231 bias-pull-down; 232 }; 233 234 pm8921_l11: l11 { 235 regulator-min-microvolt = <2850000>; 236 regulator-max-microvolt = <2850000>; 237 bias-pull-down; 238 }; 239 240 pm8921_l12: l12 { 241 regulator-min-microvolt = <1200000>; 242 regulator-max-microvolt = <1200000>; 243 bias-pull-down; 244 }; 245 246 pm8921_l14: l14 { 247 regulator-min-microvolt = <1800000>; 248 regulator-max-microvolt = <1800000>; 249 bias-pull-down; 250 }; 251 252 pm8921_l15: l15 { 253 regulator-min-microvolt = <1800000>; 254 regulator-max-microvolt = <2950000>; 255 bias-pull-down; 256 }; 257 258 pm8921_l16: l16 { 259 regulator-min-microvolt = <2800000>; 260 regulator-max-microvolt = <2800000>; 261 bias-pull-down; 262 }; 263 264 pm8921_l17: l17 { 265 regulator-min-microvolt = <1800000>; 266 regulator-max-microvolt = <2950000>; 267 bias-pull-down; 268 }; 269 270 pm8921_l18: l18 { 271 regulator-min-microvolt = <1300000>; 272 regulator-max-microvolt = <1300000>; 273 bias-pull-down; 274 }; 275 276 pm8921_l21: l21 { 277 regulator-min-microvolt = <1900000>; 278 regulator-max-microvolt = <1900000>; 279 bias-pull-down; 280 }; 281 282 pm8921_l22: l22 { 283 regulator-min-microvolt = <2750000>; 284 regulator-max-microvolt = <2750000>; 285 bias-pull-down; 286 }; 287 288 pm8921_l23: l23 { 289 regulator-always-on; 290 regulator-min-microvolt = <1800000>; 291 regulator-max-microvolt = <1800000>; 292 bias-pull-down; 293 }; 294 295 pm8921_l24: l24 { 296 regulator-min-microvolt = <750000>; 297 regulator-max-microvolt = <1150000>; 298 bias-pull-down; 299 }; 300 301 pm8921_l25: l25 { 302 regulator-always-on; 303 regulator-min-microvolt = <1250000>; 304 regulator-max-microvolt = <1250000>; 305 bias-pull-down; 306 }; 307 308 /* Low Voltage Switch */ 309 pm8921_lvs1: lvs1 { 310 bias-pull-down; 311 }; 312 313 pm8921_lvs2: lvs2 { 314 bias-pull-down; 315 }; 316 317 pm8921_lvs3: lvs3 { 318 bias-pull-down; 319 }; 320 321 pm8921_lvs4: lvs4 { 322 bias-pull-down; 323 }; 324 325 pm8921_lvs5: lvs5 { 326 bias-pull-down; 327 }; 328 329 pm8921_lvs6: lvs6 { 330 bias-pull-down; 331 }; 332 333 pm8921_lvs7: lvs7 { 334 bias-pull-down; 335 }; 336 337 pm8921_ncp: ncp { 338 regulator-min-microvolt = <1800000>; 339 regulator-max-microvolt = <1800000>; 340 qcom,switch-mode-frequency = <1600000>; 341 }; 342 }; 343}; 344 345/* eMMC */ 346&sdcc1 { 347 status = "okay"; 348}; 349 350/* External micro SD card */ 351&sdcc3 { 352 status = "okay"; 353}; 354