1/* 2 * Copyright 2015 Technologic Systems 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 * 13 * This file is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * Or, alternatively, 19 * 20 * b) Permission is hereby granted, free of charge, to any person 21 * obtaining a copy of this software and associated documentation 22 * files (the "Software"), to deal in the Software without 23 * restriction, including without limitation the rights to use, 24 * copy, modify, merge, publish, distribute, sublicense, and/or 25 * sell copies of the Software, and to permit persons to whom the 26 * Software is furnished to do so, subject to the following 27 * conditions: 28 * 29 * The above copyright notice and this permission notice shall be 30 * included in all copies or substantial portions of the Software. 31 * 32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 39 * OTHER DEALINGS IN THE SOFTWARE. 40 */ 41 42#include <dt-bindings/gpio/gpio.h> 43#include <dt-bindings/interrupt-controller/irq.h> 44 45/ { 46 aliases { 47 ethernet0 = &fec; 48 }; 49 50 leds { 51 pinctrl-names = "default"; 52 pinctrl-0 = <&pinctrl_leds1>; 53 compatible = "gpio-leds"; 54 55 green-led { 56 label = "green-led"; 57 gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; 58 default-state = "on"; 59 }; 60 61 red-led { 62 label = "red-led"; 63 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; 64 default-state = "off"; 65 }; 66 }; 67 68 reg_3p3v: regulator-3p3v { 69 compatible = "regulator-fixed"; 70 regulator-name = "3p3v"; 71 regulator-min-microvolt = <3300000>; 72 regulator-max-microvolt = <3300000>; 73 }; 74 75 reg_usb_otg_vbus: regulator-usb-otg-vbus { 76 compatible = "regulator-fixed"; 77 regulator-name = "usb_otg_vbus"; 78 regulator-min-microvolt = <5000000>; 79 regulator-max-microvolt = <5000000>; 80 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 81 enable-active-high; 82 }; 83}; 84 85&can1 { 86 pinctrl-names = "default"; 87 pinctrl-0 = <&pinctrl_flexcan1>; 88 status = "okay"; 89}; 90 91&can2 { 92 pinctrl-names = "default"; 93 pinctrl-0 = <&pinctrl_flexcan2>; 94 status = "okay"; 95}; 96 97&ecspi1 { 98 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 99 pinctrl-names = "default"; 100 pinctrl-0 = <&pinctrl_ecspi1>; 101 status = "okay"; 102 103 n25q064: flash@0 { 104 compatible = "micron,n25q064", "jedec,spi-nor"; 105 reg = <0>; 106 spi-max-frequency = <20000000>; 107 }; 108}; 109 110&ecspi2 { 111 cs-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; 112 pinctrl-names = "default"; 113 pinctrl-0 = <&pinctrl_ecspi2>; 114 status = "okay"; 115}; 116 117&fec { 118 pinctrl-names = "default"; 119 pinctrl-0 = <&pinctrl_enet>; 120 phy-mode = "rgmii"; 121 status = "okay"; 122}; 123 124&i2c1 { 125 clock-frequency = <100000>; 126 pinctrl-names = "default", "gpio"; 127 pinctrl-0 = <&pinctrl_i2c1>; 128 pinctrl-1 = <&pinctrl_i2c1_gpio>; 129 scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 130 sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; 131 status = "okay"; 132 133 isl12022: rtc@6f { 134 compatible = "isil,isl12022"; 135 reg = <0x6f>; 136 }; 137 138 gpio8: gpio@28 { 139 compatible = "technologic,ts4900-gpio"; 140 reg = <0x28>; 141 #gpio-cells = <2>; 142 gpio-controller; 143 ngpio = <32>; 144 }; 145}; 146 147&i2c2 { 148 clock-frequency = <100000>; 149 pinctrl-names = "default", "gpio"; 150 pinctrl-0 = <&pinctrl_i2c2>; 151 pinctrl-1 = <&pinctrl_i2c2_gpio>; 152 scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; 153 sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; 154 status = "okay"; 155}; 156 157&iomuxc { 158 pinctrl-names = "default"; 159 pinctrl-0 = <&pinctrl_hog>; 160 161 pinctrl_ecspi1: ecspi1grp { 162 fsl,pins = < 163 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 164 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 165 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 166 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 /* Onboard flash CS1# */ 167 >; 168 }; 169 170 pinctrl_ecspi2: ecspi2grp { 171 fsl,pins = < 172 MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 173 MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 174 MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 175 MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1 /* Offboard CS0# */ 176 MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x100b1 /* FPGA CS1# */ 177 MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1 /* FPGA_RESET# */ 178 MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 /* FPGA_DONE */ 179 MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10 /* FPGA 24MHZ */ 180 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 /* FPGA_IRQ */ 181 >; 182 }; 183 184 pinctrl_enet: enetgrp { 185 fsl,pins = < 186 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 187 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 188 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 189 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 190 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 191 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 192 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 193 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 194 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 195 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 196 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 197 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 198 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 199 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 200 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x4001b0a8 201 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 202 MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b1 /* ETH_PHY_RESET */ 203 >; 204 }; 205 206 pinctrl_flexcan1: flexcan1grp { 207 fsl,pins = < 208 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 209 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 210 >; 211 }; 212 213 pinctrl_flexcan2: flexcan2grp { 214 fsl,pins = < 215 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b1 216 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b1 217 >; 218 }; 219 220 pinctrl_hog: hoggrp { 221 fsl,pins = < 222 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1 /* OFF_BD_RESET# */ 223 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 /* EN_USB_5V# */ 224 MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b1 /* EN_LCD_3.3V */ 225 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* Audio CLK */ 226 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 /* DIO_1 */ 227 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b1 /* DIO_2 */ 228 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b1 /* DIO_3 */ 229 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b1 /* DIO_4 */ 230 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 /* DIO_5 */ 231 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b1 /* DIO_7 */ 232 MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b1 /* DIO_8 */ 233 MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b1 /* DIO_9 */ 234 MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b1 /* DIO_0 */ 235 MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b1 /* DIO_6 */ 236 MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b1 /* CPU_DIO_A */ 237 MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b1 /* DIO_2 */ 238 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b1 /* CPU_DIO_B */ 239 MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1 /* BUS_ALE# */ 240 MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1 /* DIO_15 */ 241 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1 /* BUS_DIR */ 242 MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1 /* BUS_CS# */ 243 MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* DIO_14 */ 244 MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b1 /* DIO_16 */ 245 MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x1b0b1 /* DIO_12 */ 246 MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1 /* DIO_18 */ 247 MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b1 /* DIO_19 */ 248 MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1 /* DIO_20 */ 249 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b1 /* BUS_BHE# */ 250 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1 /* DIO_13 */ 251 MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1 /* EIM_WAIT# */ 252 MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b1 /* DIO_10 */ 253 MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1 /* MUX_AD_00 */ 254 MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1 /* MUX_AD_01 */ 255 MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 /* MUX_AD_02 */ 256 MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1 /* MUX_AD_03 */ 257 MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 /* MUX_AD_04 */ 258 MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 /* MUX_AD_05 */ 259 MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1 /* MUX_AD_06 */ 260 MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 /* MUX_AD_07 */ 261 MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1 /* MUX_AD_08 */ 262 MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1 /* MUX_AD_09 */ 263 MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1 /* MUX_AD_10 */ 264 MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1 /* MUX_AD_11 */ 265 MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1 /* MUX_AD_12 */ 266 MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1 /* MUX_AD_13 */ 267 MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1 /* MUX_AD_14 */ 268 MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1 /* MUX_AD_15 */ 269 MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1 /* LCD_CLK */ 270 MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b1 /* DE */ 271 MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b1 /* Hsync */ 272 MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b1 /* Vsync */ 273 MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b1 274 MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x1b0b1 275 MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x1b0b1 276 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b1 277 MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1 278 MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b1 279 MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b1 280 MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b1 281 MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x1b0b1 282 MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b1 283 MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b1 284 MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x1b0b1 285 MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b1 286 MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 287 MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 288 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 289 MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 290 MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 291 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b1 292 MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1 293 MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b1 294 MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1 295 MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b1 296 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1 297 >; 298 }; 299 300 pinctrl_i2c1: i2c1grp { 301 fsl,pins = < 302 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 303 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 304 >; 305 }; 306 307 pinctrl_i2c1_gpio: i2c1gpiogrp { 308 fsl,pins = < 309 MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 310 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 311 >; 312 }; 313 314 pinctrl_i2c2: i2c2grp { 315 fsl,pins = < 316 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 317 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 318 >; 319 }; 320 321 pinctrl_i2c2_gpio: i2c2gpiogrp { 322 fsl,pins = < 323 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 324 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 325 >; 326 }; 327 328 pinctrl_leds1: leds1grp { 329 fsl,pins = < 330 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 /* RED_LED# */ 331 MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 /* GREEN_LED# */ 332 >; 333 }; 334 335 pinctrl_uart1: uart1grp { 336 fsl,pins = < 337 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 338 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 339 >; 340 }; 341 342 pinctrl_uart2: uart2grp { 343 fsl,pins = < 344 MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 345 MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1 346 MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 347 MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 348 >; 349 }; 350 351 pinctrl_uart3: uart3grp { 352 fsl,pins = < 353 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 354 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 355 >; 356 }; 357 358 pinctrl_uart4: uart4grp { 359 fsl,pins = < 360 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 361 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 362 >; 363 }; 364 365 pinctrl_uart5: uart5grp { 366 fsl,pins = < 367 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 368 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 369 >; 370 }; 371 372 pinctrl_usbotg: usbotggrp { 373 fsl,pins = < 374 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 375 >; 376 }; 377 378 pinctrl_usdhc1: usdhc1grp { 379 fsl,pins = < 380 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 381 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 382 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 383 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 384 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 385 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 386 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x17059 /* WIFI IRQ */ 387 >; 388 }; 389 390 pinctrl_usdhc2: usdhc2grp { 391 fsl,pins = < 392 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 393 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 394 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 395 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 396 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 397 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 398 MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b1 /* EN_SD_POWER# */ 399 >; 400 }; 401 402 pinctrl_usdhc3: usdhc3grp { 403 fsl,pins = < 404 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 405 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 406 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 407 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 408 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 409 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 410 >; 411 }; 412}; 413 414&pcie { 415 status = "okay"; 416}; 417 418&uart1 { 419 pinctrl-names = "default"; 420 pinctrl-0 = <&pinctrl_uart1>; 421 status = "okay"; 422}; 423 424&uart2 { 425 pinctrl-names = "default"; 426 pinctrl-0 = <&pinctrl_uart2>; 427 uart-has-rtscts; 428 status = "okay"; 429}; 430 431&uart3 { 432 pinctrl-names = "default"; 433 pinctrl-0 = <&pinctrl_uart3>; 434 status = "okay"; 435}; 436 437&uart4 { 438 pinctrl-names = "default"; 439 pinctrl-0 = <&pinctrl_uart4>; 440 status = "okay"; 441}; 442 443&uart5 { 444 pinctrl-names = "default"; 445 pinctrl-0 = <&pinctrl_uart5>; 446 status = "okay"; 447}; 448 449&usbh1 { 450 status = "okay"; 451}; 452 453&usbotg { 454 vbus-supply = <®_usb_otg_vbus>; 455 pinctrl-names = "default"; 456 pinctrl-0 = <&pinctrl_usbotg>; 457 disable-over-current; 458 status = "okay"; 459}; 460 461/* SD */ 462&usdhc2 { 463 pinctrl-names = "default"; 464 pinctrl-0 = <&pinctrl_usdhc2>; 465 vmmc-supply = <®_3p3v>; 466 bus-width = <4>; 467 fsl,wp-controller; 468 status = "okay"; 469}; 470 471/* eMMC */ 472&usdhc3 { 473 pinctrl-names = "default"; 474 pinctrl-0 = <&pinctrl_usdhc3>; 475 vmmc-supply = <®_3p3v>; 476 bus-width = <4>; 477 non-removable; 478 status = "okay"; 479}; 480