1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Copyright (c) 2014 Protonic Holland 4 */ 5 6/dts-v1/; 7#include "imx6dl.dtsi" 8#include "imx6qdl-prti6q.dtsi" 9#include <dt-bindings/leds/common.h> 10 11/ { 12 model = "Protonic RVT board"; 13 compatible = "prt,prtrvt", "fsl,imx6dl"; 14 15 memory@10000000 { 16 device_type = "memory"; 17 reg = <0x10000000 0x10000000>; 18 }; 19 20 leds { 21 compatible = "gpio-leds"; 22 pinctrl-names = "default"; 23 pinctrl-0 = <&pinctrl_leds>; 24 25 led-debug0 { 26 function = LED_FUNCTION_STATUS; 27 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; 28 linux,default-trigger = "heartbeat"; 29 }; 30 }; 31}; 32 33&can1 { 34 pinctrl-names = "default"; 35 pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>; 36 status = "okay"; 37}; 38 39&ecspi1 { 40 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 41 pinctrl-names = "default"; 42 pinctrl-0 = <&pinctrl_ecspi1>; 43 status = "okay"; 44 45 flash@0 { 46 compatible = "jedec,spi-nor"; 47 reg = <0>; 48 spi-max-frequency = <20000000>; 49 #address-cells = <1>; 50 #size-cells = <1>; 51 }; 52}; 53 54&ecspi3 { 55 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; 56 pinctrl-names = "default"; 57 pinctrl-0 = <&pinctrl_ecspi3>; 58 status = "okay"; 59 60 nfc@0 { 61 compatible = "ti,trf7970a"; 62 reg = <0>; 63 pinctrl-names = "default"; 64 pinctrl-0 = <&pinctrl_nfc>; 65 spi-max-frequency = <2000000>; 66 interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>; 67 ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, 68 <&gpio5 11 GPIO_ACTIVE_LOW>; 69 vin-supply = <®_3v3>; 70 autosuspend-delay = <30000>; 71 irq-status-read-quirk; 72 en2-rf-quirk; 73 status = "okay"; 74 }; 75}; 76 77&i2c3 { 78 adc@49 { 79 compatible = "ti,ads1015"; 80 reg = <0x49>; 81 #address-cells = <1>; 82 #size-cells = <0>; 83 84 /* nc */ 85 channel@4 { 86 reg = <4>; 87 ti,gain = <3>; 88 ti,datarate = <3>; 89 }; 90 91 /* nc */ 92 channel@5 { 93 reg = <5>; 94 ti,gain = <3>; 95 ti,datarate = <3>; 96 }; 97 98 /* can1_l */ 99 channel@6 { 100 reg = <6>; 101 ti,gain = <3>; 102 ti,datarate = <3>; 103 }; 104 105 /* can1_h */ 106 channel@7 { 107 reg = <7>; 108 ti,gain = <3>; 109 ti,datarate = <3>; 110 }; 111 }; 112 113 rtc@51 { 114 compatible = "nxp,pcf8563"; 115 reg = <0x51>; 116 }; 117}; 118 119&pcie { 120 status = "okay"; 121}; 122 123&usbh1 { 124 status = "disabled"; 125}; 126 127&usbotg { 128 disable-over-current; 129}; 130 131&vpu { 132 status = "disabled"; 133}; 134 135&iomuxc { 136 pinctrl_can1phy: can1phy { 137 fsl,pins = < 138 /* CAN1_SR */ 139 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 140 /* CAN1_TERM */ 141 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 142 >; 143 }; 144 145 pinctrl_ecspi1: ecspi1grp { 146 fsl,pins = < 147 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 148 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 149 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 150 /* CS */ 151 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 152 >; 153 }; 154 155 pinctrl_ecspi3: ecspi3grp { 156 fsl,pins = < 157 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 158 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 159 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 160 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 161 >; 162 }; 163 164 pinctrl_leds: ledsgrp { 165 fsl,pins = < 166 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 167 >; 168 }; 169 170 pinctrl_nfc: nfcgrp { 171 fsl,pins = < 172 /* NFC_ASK_OOK */ 173 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x100b1 174 /* NFC_PWR_EN */ 175 MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x100b1 176 /* NFC_EN2 */ 177 MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x100b1 178 /* NFC_EN */ 179 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 180 /* NFC_MOD */ 181 MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 182 /* NFC_IRQ */ 183 MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 184 >; 185 }; 186}; 187