1 # SPDX-License-Identifier: GPL-2.0 2 VERSION = 6 3 PATCHLEVEL = 2 4 SUBLEVEL = 0 5 EXTRAVERSION = -rc2 6 NAME = Hurr durr I'ma ninja sloth 7 8 # *DOCUMENTATION* 9 # To see a list of typical targets execute "make help" 10 # More info can be located in ./README 11 # Comments in this file are targeted only to the developer, do not 12 # expect to learn how to build the kernel reading this file. 13 14 ifeq ($(filter undefine,$(.FEATURES)),) 15 $(error GNU Make >= 3.82 is required. Your Make version is $(MAKE_VERSION)) 16 endif 17 18 $(if $(filter __%, $(MAKECMDGOALS)), \ 19 $(error targets prefixed with '__' are only for internal use)) 20 21 # That's our default target when none is given on the command line 22 PHONY := __all 23 __all: 24 25 # We are using a recursive build, so we need to do a little thinking 26 # to get the ordering right. 27 # 28 # Most importantly: sub-Makefiles should only ever modify files in 29 # their own directory. If in some directory we have a dependency on 30 # a file in another dir (which doesn't happen often, but it's often 31 # unavoidable when linking the built-in.a targets which finally 32 # turn into vmlinux), we will call a sub make in that other dir, and 33 # after that we are sure that everything which is in that other dir 34 # is now up to date. 35 # 36 # The only cases where we need to modify files which have global 37 # effects are thus separated out and done before the recursive 38 # descending is started. They are now explicitly listed as the 39 # prepare rule. 40 41 ifneq ($(sub_make_done),1) 42 43 # Do not use make's built-in rules and variables 44 # (this increases performance and avoids hard-to-debug behaviour) 45 MAKEFLAGS += -rR 46 47 # Avoid funny character set dependencies 48 unexport LC_ALL 49 LC_COLLATE=C 50 LC_NUMERIC=C 51 export LC_COLLATE LC_NUMERIC 52 53 # Avoid interference with shell env settings 54 unexport GREP_OPTIONS 55 56 # Beautify output 57 # --------------------------------------------------------------------------- 58 # 59 # Normally, we echo the whole command before executing it. By making 60 # that echo $($(quiet)$(cmd)), we now have the possibility to set 61 # $(quiet) to choose other forms of output instead, e.g. 62 # 63 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 64 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 65 # 66 # If $(quiet) is empty, the whole command will be printed. 67 # If it is set to "quiet_", only the short version will be printed. 68 # If it is set to "silent_", nothing will be printed at all, since 69 # the variable $(silent_cmd_cc_o_c) doesn't exist. 70 # 71 # A simple variant is to prefix commands with $(Q) - that's useful 72 # for commands that shall be hidden in non-verbose mode. 73 # 74 # $(Q)ln $@ :< 75 # 76 # If KBUILD_VERBOSE equals 0 then the above command will be hidden. 77 # If KBUILD_VERBOSE equals 1 then the above command is displayed. 78 # If KBUILD_VERBOSE equals 2 then give the reason why each target is rebuilt. 79 # 80 # To put more focus on warnings, be less verbose as default 81 # Use 'make V=1' to see the full commands 82 83 ifeq ("$(origin V)", "command line") 84 KBUILD_VERBOSE = $(V) 85 endif 86 ifndef KBUILD_VERBOSE 87 KBUILD_VERBOSE = 0 88 endif 89 90 ifeq ($(KBUILD_VERBOSE),1) 91 quiet = 92 Q = 93 else 94 quiet=quiet_ 95 Q = @ 96 endif 97 98 # If the user is running make -s (silent mode), suppress echoing of 99 # commands 100 # make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS. 101 102 ifeq ($(filter 3.%,$(MAKE_VERSION)),) 103 silence:=$(findstring s,$(firstword -$(MAKEFLAGS))) 104 else 105 silence:=$(findstring s,$(filter-out --%,$(MAKEFLAGS))) 106 endif 107 108 ifeq ($(silence),s) 109 quiet=silent_ 110 KBUILD_VERBOSE = 0 111 endif 112 113 export quiet Q KBUILD_VERBOSE 114 115 # Call a source code checker (by default, "sparse") as part of the 116 # C compilation. 117 # 118 # Use 'make C=1' to enable checking of only re-compiled files. 119 # Use 'make C=2' to enable checking of *all* source files, regardless 120 # of whether they are re-compiled or not. 121 # 122 # See the file "Documentation/dev-tools/sparse.rst" for more details, 123 # including where to get the "sparse" utility. 124 125 ifeq ("$(origin C)", "command line") 126 KBUILD_CHECKSRC = $(C) 127 endif 128 ifndef KBUILD_CHECKSRC 129 KBUILD_CHECKSRC = 0 130 endif 131 132 export KBUILD_CHECKSRC 133 134 # Enable "clippy" (a linter) as part of the Rust compilation. 135 # 136 # Use 'make CLIPPY=1' to enable it. 137 ifeq ("$(origin CLIPPY)", "command line") 138 KBUILD_CLIPPY := $(CLIPPY) 139 endif 140 141 export KBUILD_CLIPPY 142 143 # Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the 144 # directory of external module to build. Setting M= takes precedence. 145 ifeq ("$(origin M)", "command line") 146 KBUILD_EXTMOD := $(M) 147 endif 148 149 $(if $(word 2, $(KBUILD_EXTMOD)), \ 150 $(error building multiple external modules is not supported)) 151 152 $(foreach x, % :, $(if $(findstring $x, $(KBUILD_EXTMOD)), \ 153 $(error module directory path cannot contain '$x'))) 154 155 # Remove trailing slashes 156 ifneq ($(filter %/, $(KBUILD_EXTMOD)),) 157 KBUILD_EXTMOD := $(shell dirname $(KBUILD_EXTMOD).) 158 endif 159 160 export KBUILD_EXTMOD 161 162 # Kbuild will save output files in the current working directory. 163 # This does not need to match to the root of the kernel source tree. 164 # 165 # For example, you can do this: 166 # 167 # cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile 168 # 169 # If you want to save output files in a different location, there are 170 # two syntaxes to specify it. 171 # 172 # 1) O= 173 # Use "make O=dir/to/store/output/files/" 174 # 175 # 2) Set KBUILD_OUTPUT 176 # Set the environment variable KBUILD_OUTPUT to point to the output directory. 177 # export KBUILD_OUTPUT=dir/to/store/output/files/; make 178 # 179 # The O= assignment takes precedence over the KBUILD_OUTPUT environment 180 # variable. 181 182 # Do we want to change the working directory? 183 ifeq ("$(origin O)", "command line") 184 KBUILD_OUTPUT := $(O) 185 endif 186 187 ifneq ($(KBUILD_OUTPUT),) 188 # Make's built-in functions such as $(abspath ...), $(realpath ...) cannot 189 # expand a shell special character '~'. We use a somewhat tedious way here. 190 abs_objtree := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd) 191 $(if $(abs_objtree),, \ 192 $(error failed to create output directory "$(KBUILD_OUTPUT)")) 193 194 # $(realpath ...) resolves symlinks 195 abs_objtree := $(realpath $(abs_objtree)) 196 else 197 abs_objtree := $(CURDIR) 198 endif # ifneq ($(KBUILD_OUTPUT),) 199 200 ifeq ($(abs_objtree),$(CURDIR)) 201 # Suppress "Entering directory ..." unless we are changing the work directory. 202 MAKEFLAGS += --no-print-directory 203 else 204 need-sub-make := 1 205 endif 206 207 this-makefile := $(lastword $(MAKEFILE_LIST)) 208 abs_srctree := $(realpath $(dir $(this-makefile))) 209 210 ifneq ($(words $(subst :, ,$(abs_srctree))), 1) 211 $(error source directory cannot contain spaces or colons) 212 endif 213 214 ifneq ($(abs_srctree),$(abs_objtree)) 215 # Look for make include files relative to root of kernel src 216 # 217 # --included-dir is added for backward compatibility, but you should not rely on 218 # it. Please add $(srctree)/ prefix to include Makefiles in the source tree. 219 MAKEFLAGS += --include-dir=$(abs_srctree) 220 endif 221 222 ifneq ($(filter 3.%,$(MAKE_VERSION)),) 223 # 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x 224 # We need to invoke sub-make to avoid implicit rules in the top Makefile. 225 need-sub-make := 1 226 # Cancel implicit rules for this Makefile. 227 $(this-makefile): ; 228 endif 229 230 export abs_srctree abs_objtree 231 export sub_make_done := 1 232 233 ifeq ($(need-sub-make),1) 234 235 PHONY += $(MAKECMDGOALS) __sub-make 236 237 $(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make 238 @: 239 240 # Invoke a second make in the output directory, passing relevant variables 241 __sub-make: 242 $(Q)$(MAKE) -C $(abs_objtree) -f $(abs_srctree)/Makefile $(MAKECMDGOALS) 243 244 endif # need-sub-make 245 endif # sub_make_done 246 247 # We process the rest of the Makefile if this is the final invocation of make 248 ifeq ($(need-sub-make),) 249 250 # Do not print "Entering directory ...", 251 # but we want to display it when entering to the output directory 252 # so that IDEs/editors are able to understand relative filenames. 253 MAKEFLAGS += --no-print-directory 254 255 ifeq ($(abs_srctree),$(abs_objtree)) 256 # building in the source tree 257 srctree := . 258 building_out_of_srctree := 259 else 260 ifeq ($(abs_srctree)/,$(dir $(abs_objtree))) 261 # building in a subdirectory of the source tree 262 srctree := .. 263 else 264 srctree := $(abs_srctree) 265 endif 266 building_out_of_srctree := 1 267 endif 268 269 ifneq ($(KBUILD_ABS_SRCTREE),) 270 srctree := $(abs_srctree) 271 endif 272 273 objtree := . 274 VPATH := $(srctree) 275 276 export building_out_of_srctree srctree objtree VPATH 277 278 # To make sure we do not include .config for any of the *config targets 279 # catch them early, and hand them over to scripts/kconfig/Makefile 280 # It is allowed to specify more targets when calling make, including 281 # mixing *config targets and build targets. 282 # For example 'make oldconfig all'. 283 # Detect when mixed targets is specified, and make a second invocation 284 # of make so .config is not included in this case either (for *config). 285 286 version_h := include/generated/uapi/linux/version.h 287 288 clean-targets := %clean mrproper cleandocs 289 no-dot-config-targets := $(clean-targets) \ 290 cscope gtags TAGS tags help% %docs check% coccicheck \ 291 $(version_h) headers headers_% archheaders archscripts \ 292 %asm-generic kernelversion %src-pkg dt_binding_check \ 293 outputmakefile rustavailable rustfmt rustfmtcheck 294 # Installation targets should not require compiler. Unfortunately, vdso_install 295 # is an exception where build artifacts may be updated. This must be fixed. 296 no-compiler-targets := $(no-dot-config-targets) install dtbs_install \ 297 headers_install modules_install kernelrelease image_name 298 no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease \ 299 image_name 300 single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.rsi %.s %.symtypes %/ 301 302 config-build := 303 mixed-build := 304 need-config := 1 305 need-compiler := 1 306 may-sync-config := 1 307 single-build := 308 309 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 310 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 311 need-config := 312 endif 313 endif 314 315 ifneq ($(filter $(no-compiler-targets), $(MAKECMDGOALS)),) 316 ifeq ($(filter-out $(no-compiler-targets), $(MAKECMDGOALS)),) 317 need-compiler := 318 endif 319 endif 320 321 ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),) 322 ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),) 323 may-sync-config := 324 endif 325 endif 326 327 ifneq ($(KBUILD_EXTMOD),) 328 may-sync-config := 329 endif 330 331 ifeq ($(KBUILD_EXTMOD),) 332 ifneq ($(filter %config,$(MAKECMDGOALS)),) 333 config-build := 1 334 ifneq ($(words $(MAKECMDGOALS)),1) 335 mixed-build := 1 336 endif 337 endif 338 endif 339 340 # We cannot build single targets and the others at the same time 341 ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),) 342 single-build := 1 343 ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),) 344 mixed-build := 1 345 endif 346 endif 347 348 # For "make -j clean all", "make -j mrproper defconfig all", etc. 349 ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),) 350 ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),) 351 mixed-build := 1 352 endif 353 endif 354 355 # install and modules_install need also be processed one by one 356 ifneq ($(filter install,$(MAKECMDGOALS)),) 357 ifneq ($(filter modules_install,$(MAKECMDGOALS)),) 358 mixed-build := 1 359 endif 360 endif 361 362 ifdef mixed-build 363 # =========================================================================== 364 # We're called with mixed targets (*config and build targets). 365 # Handle them one by one. 366 367 PHONY += $(MAKECMDGOALS) __build_one_by_one 368 369 $(MAKECMDGOALS): __build_one_by_one 370 @: 371 372 __build_one_by_one: 373 $(Q)set -e; \ 374 for i in $(MAKECMDGOALS); do \ 375 $(MAKE) -f $(srctree)/Makefile $$i; \ 376 done 377 378 else # !mixed-build 379 380 include $(srctree)/scripts/Kbuild.include 381 382 # Read KERNELRELEASE from include/config/kernel.release (if it exists) 383 KERNELRELEASE = $(call read-file, include/config/kernel.release) 384 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 385 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION 386 387 include $(srctree)/scripts/subarch.include 388 389 # Cross compiling and selecting different set of gcc/bin-utils 390 # --------------------------------------------------------------------------- 391 # 392 # When performing cross compilation for other architectures ARCH shall be set 393 # to the target architecture. (See arch/* for the possibilities). 394 # ARCH can be set during invocation of make: 395 # make ARCH=ia64 396 # Another way is to have ARCH set in the environment. 397 # The default ARCH is the host where make is executed. 398 399 # CROSS_COMPILE specify the prefix used for all executables used 400 # during compilation. Only gcc and related bin-utils executables 401 # are prefixed with $(CROSS_COMPILE). 402 # CROSS_COMPILE can be set on the command line 403 # make CROSS_COMPILE=ia64-linux- 404 # Alternatively CROSS_COMPILE can be set in the environment. 405 # Default value for CROSS_COMPILE is not to prefix executables 406 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile 407 ARCH ?= $(SUBARCH) 408 409 # Architecture as present in compile.h 410 UTS_MACHINE := $(ARCH) 411 SRCARCH := $(ARCH) 412 413 # Additional ARCH settings for x86 414 ifeq ($(ARCH),i386) 415 SRCARCH := x86 416 endif 417 ifeq ($(ARCH),x86_64) 418 SRCARCH := x86 419 endif 420 421 # Additional ARCH settings for sparc 422 ifeq ($(ARCH),sparc32) 423 SRCARCH := sparc 424 endif 425 ifeq ($(ARCH),sparc64) 426 SRCARCH := sparc 427 endif 428 429 # Additional ARCH settings for parisc 430 ifeq ($(ARCH),parisc64) 431 SRCARCH := parisc 432 endif 433 434 export cross_compiling := 435 ifneq ($(SRCARCH),$(SUBARCH)) 436 cross_compiling := 1 437 endif 438 439 KCONFIG_CONFIG ?= .config 440 export KCONFIG_CONFIG 441 442 # SHELL used by kbuild 443 CONFIG_SHELL := sh 444 445 HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null) 446 HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null) 447 HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null) 448 449 ifneq ($(LLVM),) 450 ifneq ($(filter %/,$(LLVM)),) 451 LLVM_PREFIX := $(LLVM) 452 else ifneq ($(filter -%,$(LLVM)),) 453 LLVM_SUFFIX := $(LLVM) 454 endif 455 456 HOSTCC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX) 457 HOSTCXX = $(LLVM_PREFIX)clang++$(LLVM_SUFFIX) 458 else 459 HOSTCC = gcc 460 HOSTCXX = g++ 461 endif 462 HOSTRUSTC = rustc 463 HOSTPKG_CONFIG = pkg-config 464 465 KBUILD_USERHOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \ 466 -O2 -fomit-frame-pointer -std=gnu11 \ 467 -Wdeclaration-after-statement 468 KBUILD_USERCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(USERCFLAGS) 469 KBUILD_USERLDFLAGS := $(USERLDFLAGS) 470 471 # These flags apply to all Rust code in the tree, including the kernel and 472 # host programs. 473 export rust_common_flags := --edition=2021 \ 474 -Zbinary_dep_depinfo=y \ 475 -Dunsafe_op_in_unsafe_fn -Drust_2018_idioms \ 476 -Dunreachable_pub -Dnon_ascii_idents \ 477 -Wmissing_docs \ 478 -Drustdoc::missing_crate_level_docs \ 479 -Dclippy::correctness -Dclippy::style \ 480 -Dclippy::suspicious -Dclippy::complexity \ 481 -Dclippy::perf \ 482 -Dclippy::let_unit_value -Dclippy::mut_mut \ 483 -Dclippy::needless_bitwise_bool \ 484 -Dclippy::needless_continue \ 485 -Wclippy::dbg_macro 486 487 KBUILD_HOSTCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS) 488 KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS) 489 KBUILD_HOSTRUSTFLAGS := $(rust_common_flags) -O -Cstrip=debuginfo \ 490 -Zallow-features= $(HOSTRUSTFLAGS) 491 KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS) 492 KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS) 493 494 # Make variables (CC, etc...) 495 CPP = $(CC) -E 496 ifneq ($(LLVM),) 497 CC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX) 498 LD = $(LLVM_PREFIX)ld.lld$(LLVM_SUFFIX) 499 AR = $(LLVM_PREFIX)llvm-ar$(LLVM_SUFFIX) 500 NM = $(LLVM_PREFIX)llvm-nm$(LLVM_SUFFIX) 501 OBJCOPY = $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX) 502 OBJDUMP = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX) 503 READELF = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX) 504 STRIP = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX) 505 else 506 CC = $(CROSS_COMPILE)gcc 507 LD = $(CROSS_COMPILE)ld 508 AR = $(CROSS_COMPILE)ar 509 NM = $(CROSS_COMPILE)nm 510 OBJCOPY = $(CROSS_COMPILE)objcopy 511 OBJDUMP = $(CROSS_COMPILE)objdump 512 READELF = $(CROSS_COMPILE)readelf 513 STRIP = $(CROSS_COMPILE)strip 514 endif 515 RUSTC = rustc 516 RUSTDOC = rustdoc 517 RUSTFMT = rustfmt 518 CLIPPY_DRIVER = clippy-driver 519 BINDGEN = bindgen 520 CARGO = cargo 521 PAHOLE = pahole 522 RESOLVE_BTFIDS = $(objtree)/tools/bpf/resolve_btfids/resolve_btfids 523 LEX = flex 524 YACC = bison 525 AWK = awk 526 INSTALLKERNEL := installkernel 527 DEPMOD = depmod 528 PERL = perl 529 PYTHON3 = python3 530 CHECK = sparse 531 BASH = bash 532 KGZIP = gzip 533 KBZIP2 = bzip2 534 KLZOP = lzop 535 LZMA = lzma 536 LZ4 = lz4c 537 XZ = xz 538 ZSTD = zstd 539 540 PAHOLE_FLAGS = $(shell PAHOLE=$(PAHOLE) $(srctree)/scripts/pahole-flags.sh) 541 542 CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 543 -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF) 544 NOSTDINC_FLAGS := 545 CFLAGS_MODULE = 546 RUSTFLAGS_MODULE = 547 AFLAGS_MODULE = 548 LDFLAGS_MODULE = 549 CFLAGS_KERNEL = 550 RUSTFLAGS_KERNEL = 551 AFLAGS_KERNEL = 552 export LDFLAGS_vmlinux = 553 554 # Use USERINCLUDE when you must reference the UAPI directories only. 555 USERINCLUDE := \ 556 -I$(srctree)/arch/$(SRCARCH)/include/uapi \ 557 -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \ 558 -I$(srctree)/include/uapi \ 559 -I$(objtree)/include/generated/uapi \ 560 -include $(srctree)/include/linux/compiler-version.h \ 561 -include $(srctree)/include/linux/kconfig.h 562 563 # Use LINUXINCLUDE when you must reference the include/ directory. 564 # Needed to be compatible with the O= option 565 LINUXINCLUDE := \ 566 -I$(srctree)/arch/$(SRCARCH)/include \ 567 -I$(objtree)/arch/$(SRCARCH)/include/generated \ 568 $(if $(building_out_of_srctree),-I$(srctree)/include) \ 569 -I$(objtree)/include \ 570 $(USERINCLUDE) 571 572 KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE 573 KBUILD_CFLAGS := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \ 574 -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \ 575 -Werror=implicit-function-declaration -Werror=implicit-int \ 576 -Werror=return-type -Wno-format-security -funsigned-char \ 577 -std=gnu11 578 KBUILD_CPPFLAGS := -D__KERNEL__ 579 KBUILD_RUSTFLAGS := $(rust_common_flags) \ 580 --target=$(objtree)/rust/target.json \ 581 -Cpanic=abort -Cembed-bitcode=n -Clto=n \ 582 -Cforce-unwind-tables=n -Ccodegen-units=1 \ 583 -Csymbol-mangling-version=v0 \ 584 -Crelocation-model=static \ 585 -Zfunction-sections=n \ 586 -Dclippy::float_arithmetic 587 588 KBUILD_AFLAGS_KERNEL := 589 KBUILD_CFLAGS_KERNEL := 590 KBUILD_RUSTFLAGS_KERNEL := 591 KBUILD_AFLAGS_MODULE := -DMODULE 592 KBUILD_CFLAGS_MODULE := -DMODULE 593 KBUILD_RUSTFLAGS_MODULE := --cfg MODULE 594 KBUILD_LDFLAGS_MODULE := 595 KBUILD_LDFLAGS := 596 CLANG_FLAGS := 597 598 ifeq ($(KBUILD_CLIPPY),1) 599 RUSTC_OR_CLIPPY_QUIET := CLIPPY 600 RUSTC_OR_CLIPPY = $(CLIPPY_DRIVER) 601 else 602 RUSTC_OR_CLIPPY_QUIET := RUSTC 603 RUSTC_OR_CLIPPY = $(RUSTC) 604 endif 605 606 ifdef RUST_LIB_SRC 607 export RUST_LIB_SRC 608 endif 609 610 # Allows the usage of unstable features in stable compilers. 611 export RUSTC_BOOTSTRAP := 1 612 613 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG 614 export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO 615 export HOSTRUSTC KBUILD_HOSTRUSTFLAGS 616 export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL 617 export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX 618 export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD 619 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE 620 export KBUILD_USERCFLAGS KBUILD_USERLDFLAGS 621 622 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS 623 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE 624 export KBUILD_RUSTFLAGS RUSTFLAGS_KERNEL RUSTFLAGS_MODULE 625 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE 626 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_RUSTFLAGS_MODULE KBUILD_LDFLAGS_MODULE 627 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL KBUILD_RUSTFLAGS_KERNEL 628 export PAHOLE_FLAGS 629 630 # Files to ignore in find ... statements 631 632 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 633 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 634 -prune -o 635 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 636 --exclude CVS --exclude .pc --exclude .hg --exclude .git 637 638 # =========================================================================== 639 # Rules shared between *config targets and build targets 640 641 # Basic helpers built in scripts/basic/ 642 PHONY += scripts_basic 643 scripts_basic: 644 $(Q)$(MAKE) $(build)=scripts/basic 645 646 PHONY += outputmakefile 647 ifdef building_out_of_srctree 648 # Before starting out-of-tree build, make sure the source tree is clean. 649 # outputmakefile generates a Makefile in the output directory, if using a 650 # separate output directory. This allows convenient use of make in the 651 # output directory. 652 # At the same time when output Makefile generated, generate .gitignore to 653 # ignore whole output directory 654 655 quiet_cmd_makefile = GEN Makefile 656 cmd_makefile = { \ 657 echo "\# Automatically generated by $(srctree)/Makefile: don't edit"; \ 658 echo "include $(srctree)/Makefile"; \ 659 } > Makefile 660 661 outputmakefile: 662 @if [ -f $(srctree)/.config -o \ 663 -d $(srctree)/include/config -o \ 664 -d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \ 665 echo >&2 "***"; \ 666 echo >&2 "*** The source tree is not clean, please run 'make$(if $(findstring command line, $(origin ARCH)), ARCH=$(ARCH)) mrproper'"; \ 667 echo >&2 "*** in $(abs_srctree)";\ 668 echo >&2 "***"; \ 669 false; \ 670 fi 671 $(Q)ln -fsn $(srctree) source 672 $(call cmd,makefile) 673 $(Q)test -e .gitignore || \ 674 { echo "# this is build directory, ignore it"; echo "*"; } > .gitignore 675 endif 676 677 # The expansion should be delayed until arch/$(SRCARCH)/Makefile is included. 678 # Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile. 679 # CC_VERSION_TEXT is referenced from Kconfig (so it needs export), 680 # and from include/config/auto.conf.cmd to detect the compiler upgrade. 681 CC_VERSION_TEXT = $(subst $(pound),,$(shell LC_ALL=C $(CC) --version 2>/dev/null | head -n 1)) 682 683 ifneq ($(findstring clang,$(CC_VERSION_TEXT)),) 684 include $(srctree)/scripts/Makefile.clang 685 endif 686 687 # Include this also for config targets because some architectures need 688 # cc-cross-prefix to determine CROSS_COMPILE. 689 ifdef need-compiler 690 include $(srctree)/scripts/Makefile.compiler 691 endif 692 693 ifdef config-build 694 # =========================================================================== 695 # *config targets only - make sure prerequisites are updated, and descend 696 # in scripts/kconfig to make the *config target 697 698 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. 699 # KBUILD_DEFCONFIG may point out an alternative default configuration 700 # used for 'make defconfig' 701 include $(srctree)/arch/$(SRCARCH)/Makefile 702 export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT 703 704 config: outputmakefile scripts_basic FORCE 705 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 706 707 %config: outputmakefile scripts_basic FORCE 708 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 709 710 else #!config-build 711 # =========================================================================== 712 # Build targets only - this includes vmlinux, arch specific targets, clean 713 # targets and others. In general all targets except *config targets. 714 715 # If building an external module we do not care about the all: rule 716 # but instead __all depend on modules 717 PHONY += all 718 ifeq ($(KBUILD_EXTMOD),) 719 __all: all 720 else 721 __all: modules 722 endif 723 724 targets := 725 726 # Decide whether to build built-in, modular, or both. 727 # Normally, just do built-in. 728 729 KBUILD_MODULES := 730 KBUILD_BUILTIN := 1 731 732 # If we have only "make modules", don't compile built-in objects. 733 ifeq ($(MAKECMDGOALS),modules) 734 KBUILD_BUILTIN := 735 endif 736 737 # If we have "make <whatever> modules", compile modules 738 # in addition to whatever we do anyway. 739 # Just "make" or "make all" shall build modules as well 740 741 ifneq ($(filter all modules nsdeps %compile_commands.json clang-%,$(MAKECMDGOALS)),) 742 KBUILD_MODULES := 1 743 endif 744 745 ifeq ($(MAKECMDGOALS),) 746 KBUILD_MODULES := 1 747 endif 748 749 export KBUILD_MODULES KBUILD_BUILTIN 750 751 ifdef need-config 752 include include/config/auto.conf 753 endif 754 755 ifeq ($(KBUILD_EXTMOD),) 756 # Objects we will link into vmlinux / subdirs we need to visit 757 core-y := 758 drivers-y := 759 libs-y := lib/ 760 endif # KBUILD_EXTMOD 761 762 # The all: target is the default when no target is given on the 763 # command line. 764 # This allow a user to issue only 'make' to build a kernel including modules 765 # Defaults to vmlinux, but the arch makefile usually adds further targets 766 all: vmlinux 767 768 CFLAGS_GCOV := -fprofile-arcs -ftest-coverage 769 ifdef CONFIG_CC_IS_GCC 770 CFLAGS_GCOV += -fno-tree-loop-im 771 endif 772 export CFLAGS_GCOV 773 774 # The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later. 775 ifdef CONFIG_FUNCTION_TRACER 776 CC_FLAGS_FTRACE := -pg 777 endif 778 779 include $(srctree)/arch/$(SRCARCH)/Makefile 780 781 ifdef need-config 782 ifdef may-sync-config 783 # Read in dependencies to all Kconfig* files, make sure to run syncconfig if 784 # changes are detected. This should be included after arch/$(SRCARCH)/Makefile 785 # because some architectures define CROSS_COMPILE there. 786 include include/config/auto.conf.cmd 787 788 $(KCONFIG_CONFIG): 789 @echo >&2 '***' 790 @echo >&2 '*** Configuration file "$@" not found!' 791 @echo >&2 '***' 792 @echo >&2 '*** Please run some configurator (e.g. "make oldconfig" or' 793 @echo >&2 '*** "make menuconfig" or "make xconfig").' 794 @echo >&2 '***' 795 @/bin/false 796 797 # The actual configuration files used during the build are stored in 798 # include/generated/ and include/config/. Update them if .config is newer than 799 # include/config/auto.conf (which mirrors .config). 800 # 801 # This exploits the 'multi-target pattern rule' trick. 802 # The syncconfig should be executed only once to make all the targets. 803 # (Note: use the grouped target '&:' when we bump to GNU Make 4.3) 804 # 805 # Do not use $(call cmd,...) here. That would suppress prompts from syncconfig, 806 # so you cannot notice that Kconfig is waiting for the user input. 807 %/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h %/generated/rustc_cfg: $(KCONFIG_CONFIG) 808 $(Q)$(kecho) " SYNC $@" 809 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig 810 else # !may-sync-config 811 # External modules and some install targets need include/generated/autoconf.h 812 # and include/config/auto.conf but do not care if they are up-to-date. 813 # Use auto.conf to trigger the test 814 PHONY += include/config/auto.conf 815 816 include/config/auto.conf: 817 @test -e include/generated/autoconf.h -a -e $@ || ( \ 818 echo >&2; \ 819 echo >&2 " ERROR: Kernel configuration is invalid."; \ 820 echo >&2 " include/generated/autoconf.h or $@ are missing.";\ 821 echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ 822 echo >&2 ; \ 823 /bin/false) 824 825 endif # may-sync-config 826 endif # need-config 827 828 KBUILD_CFLAGS += -fno-delete-null-pointer-checks 829 KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) 830 KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation) 831 KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow) 832 KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) 833 834 ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE 835 KBUILD_CFLAGS += -O2 836 KBUILD_RUSTFLAGS += -Copt-level=2 837 else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 838 KBUILD_CFLAGS += -Os 839 KBUILD_RUSTFLAGS += -Copt-level=s 840 endif 841 842 # Always set `debug-assertions` and `overflow-checks` because their default 843 # depends on `opt-level` and `debug-assertions`, respectively. 844 KBUILD_RUSTFLAGS += -Cdebug-assertions=$(if $(CONFIG_RUST_DEBUG_ASSERTIONS),y,n) 845 KBUILD_RUSTFLAGS += -Coverflow-checks=$(if $(CONFIG_RUST_OVERFLOW_CHECKS),y,n) 846 847 # Tell gcc to never replace conditional load with a non-conditional one 848 ifdef CONFIG_CC_IS_GCC 849 # gcc-10 renamed --param=allow-store-data-races=0 to 850 # -fno-allow-store-data-races. 851 KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) 852 KBUILD_CFLAGS += $(call cc-option,-fno-allow-store-data-races) 853 endif 854 855 ifdef CONFIG_READABLE_ASM 856 # Disable optimizations that make assembler listings hard to read. 857 # reorder blocks reorders the control in the function 858 # ipa clone creates specialized cloned functions 859 # partial inlining inlines only parts of functions 860 KBUILD_CFLAGS += -fno-reorder-blocks -fno-ipa-cp-clone -fno-partial-inlining 861 endif 862 863 ifneq ($(CONFIG_FRAME_WARN),0) 864 KBUILD_CFLAGS += -Wframe-larger-than=$(CONFIG_FRAME_WARN) 865 endif 866 867 stackp-flags-y := -fno-stack-protector 868 stackp-flags-$(CONFIG_STACKPROTECTOR) := -fstack-protector 869 stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong 870 871 KBUILD_CFLAGS += $(stackp-flags-y) 872 873 KBUILD_CPPFLAGS-$(CONFIG_WERROR) += -Werror 874 KBUILD_CPPFLAGS += $(KBUILD_CPPFLAGS-y) 875 KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds 876 877 KBUILD_RUSTFLAGS-$(CONFIG_WERROR) += -Dwarnings 878 KBUILD_RUSTFLAGS += $(KBUILD_RUSTFLAGS-y) 879 880 ifdef CONFIG_CC_IS_CLANG 881 KBUILD_CPPFLAGS += -Qunused-arguments 882 # The kernel builds with '-std=gnu11' so use of GNU extensions is acceptable. 883 KBUILD_CFLAGS += -Wno-gnu 884 else 885 886 # gcc inanely warns about local variables called 'main' 887 KBUILD_CFLAGS += -Wno-main 888 endif 889 890 # These warnings generated too much noise in a regular build. 891 # Use make W=1 to enable them (see scripts/Makefile.extrawarn) 892 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) 893 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable) 894 895 # These result in bogus false positives 896 KBUILD_CFLAGS += $(call cc-disable-warning, dangling-pointer) 897 898 ifdef CONFIG_FRAME_POINTER 899 KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls 900 KBUILD_RUSTFLAGS += -Cforce-frame-pointers=y 901 else 902 # Some targets (ARM with Thumb2, for example), can't be built with frame 903 # pointers. For those, we don't have FUNCTION_TRACER automatically 904 # select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is 905 # incompatible with -fomit-frame-pointer with current GCC, so we don't use 906 # -fomit-frame-pointer with FUNCTION_TRACER. 907 # In the Rust target specification, "frame-pointer" is set explicitly 908 # to "may-omit". 909 ifndef CONFIG_FUNCTION_TRACER 910 KBUILD_CFLAGS += -fomit-frame-pointer 911 endif 912 endif 913 914 # Initialize all stack variables with a 0xAA pattern. 915 ifdef CONFIG_INIT_STACK_ALL_PATTERN 916 KBUILD_CFLAGS += -ftrivial-auto-var-init=pattern 917 endif 918 919 # Initialize all stack variables with a zero value. 920 ifdef CONFIG_INIT_STACK_ALL_ZERO 921 KBUILD_CFLAGS += -ftrivial-auto-var-init=zero 922 ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER 923 # https://github.com/llvm/llvm-project/issues/44842 924 KBUILD_CFLAGS += -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang 925 endif 926 endif 927 928 # While VLAs have been removed, GCC produces unreachable stack probes 929 # for the randomize_kstack_offset feature. Disable it for all compilers. 930 KBUILD_CFLAGS += $(call cc-option, -fno-stack-clash-protection) 931 932 # Clear used registers at func exit (to reduce data lifetime and ROP gadgets). 933 ifdef CONFIG_ZERO_CALL_USED_REGS 934 KBUILD_CFLAGS += -fzero-call-used-regs=used-gpr 935 endif 936 937 ifdef CONFIG_FUNCTION_TRACER 938 ifdef CONFIG_FTRACE_MCOUNT_USE_CC 939 CC_FLAGS_FTRACE += -mrecord-mcount 940 ifdef CONFIG_HAVE_NOP_MCOUNT 941 ifeq ($(call cc-option-yn, -mnop-mcount),y) 942 CC_FLAGS_FTRACE += -mnop-mcount 943 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 944 endif 945 endif 946 endif 947 ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL 948 ifdef CONFIG_HAVE_OBJTOOL_NOP_MCOUNT 949 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 950 endif 951 endif 952 ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT 953 ifdef CONFIG_HAVE_C_RECORDMCOUNT 954 BUILD_C_RECORDMCOUNT := y 955 export BUILD_C_RECORDMCOUNT 956 endif 957 endif 958 ifdef CONFIG_HAVE_FENTRY 959 # s390-linux-gnu-gcc did not support -mfentry until gcc-9. 960 ifeq ($(call cc-option-yn, -mfentry),y) 961 CC_FLAGS_FTRACE += -mfentry 962 CC_FLAGS_USING += -DCC_USING_FENTRY 963 endif 964 endif 965 export CC_FLAGS_FTRACE 966 KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING) 967 KBUILD_AFLAGS += $(CC_FLAGS_USING) 968 endif 969 970 # We trigger additional mismatches with less inlining 971 ifdef CONFIG_DEBUG_SECTION_MISMATCH 972 KBUILD_CFLAGS += -fno-inline-functions-called-once 973 endif 974 975 # `rustc`'s `-Zfunction-sections` applies to data too (as of 1.59.0). 976 ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION 977 KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections 978 KBUILD_RUSTFLAGS_KERNEL += -Zfunction-sections=y 979 LDFLAGS_vmlinux += --gc-sections 980 endif 981 982 ifdef CONFIG_SHADOW_CALL_STACK 983 ifndef CONFIG_DYNAMIC_SCS 984 CC_FLAGS_SCS := -fsanitize=shadow-call-stack 985 KBUILD_CFLAGS += $(CC_FLAGS_SCS) 986 endif 987 export CC_FLAGS_SCS 988 endif 989 990 ifdef CONFIG_LTO_CLANG 991 ifdef CONFIG_LTO_CLANG_THIN 992 CC_FLAGS_LTO := -flto=thin -fsplit-lto-unit 993 KBUILD_LDFLAGS += --thinlto-cache-dir=$(extmod_prefix).thinlto-cache 994 else 995 CC_FLAGS_LTO := -flto 996 endif 997 CC_FLAGS_LTO += -fvisibility=hidden 998 999 # Limit inlining across translation units to reduce binary size 1000 KBUILD_LDFLAGS += -mllvm -import-instr-limit=5 1001 1002 # Check for frame size exceeding threshold during prolog/epilog insertion 1003 # when using lld < 13.0.0. 1004 ifneq ($(CONFIG_FRAME_WARN),0) 1005 ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y) 1006 KBUILD_LDFLAGS += -plugin-opt=-warn-stack-size=$(CONFIG_FRAME_WARN) 1007 endif 1008 endif 1009 endif 1010 1011 ifdef CONFIG_LTO 1012 KBUILD_CFLAGS += -fno-lto $(CC_FLAGS_LTO) 1013 KBUILD_AFLAGS += -fno-lto 1014 export CC_FLAGS_LTO 1015 endif 1016 1017 ifdef CONFIG_CFI_CLANG 1018 CC_FLAGS_CFI := -fsanitize=kcfi 1019 KBUILD_CFLAGS += $(CC_FLAGS_CFI) 1020 export CC_FLAGS_CFI 1021 endif 1022 1023 ifneq ($(CONFIG_FUNCTION_ALIGNMENT),0) 1024 KBUILD_CFLAGS += -falign-functions=$(CONFIG_FUNCTION_ALIGNMENT) 1025 endif 1026 1027 # arch Makefile may override CC so keep this after arch Makefile is included 1028 NOSTDINC_FLAGS += -nostdinc 1029 1030 # warn about C99 declaration after statement 1031 KBUILD_CFLAGS += -Wdeclaration-after-statement 1032 1033 # Variable Length Arrays (VLAs) should not be used anywhere in the kernel 1034 KBUILD_CFLAGS += -Wvla 1035 1036 # disable pointer signed / unsigned warnings in gcc 4.0 1037 KBUILD_CFLAGS += -Wno-pointer-sign 1038 1039 # In order to make sure new function cast mismatches are not introduced 1040 # in the kernel (to avoid tripping CFI checking), the kernel should be 1041 # globally built with -Wcast-function-type. 1042 KBUILD_CFLAGS += $(call cc-option, -Wcast-function-type) 1043 1044 # disable stringop warnings in gcc 8+ 1045 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation) 1046 1047 # We'll want to enable this eventually, but it's not going away for 5.7 at least 1048 KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow) 1049 1050 # Another good warning that we'll want to enable eventually 1051 KBUILD_CFLAGS += $(call cc-disable-warning, restrict) 1052 1053 # Enabled with W=2, disabled by default as noisy 1054 ifdef CONFIG_CC_IS_GCC 1055 KBUILD_CFLAGS += -Wno-maybe-uninitialized 1056 endif 1057 1058 # The allocators already balk at large sizes, so silence the compiler 1059 # warnings for bounds checks involving those possible values. While 1060 # -Wno-alloc-size-larger-than would normally be used here, earlier versions 1061 # of gcc (<9.1) weirdly don't handle the option correctly when _other_ 1062 # warnings are produced (?!). Using -Walloc-size-larger-than=SIZE_MAX 1063 # doesn't work (as it is documented to), silently resolving to "0" prior to 1064 # version 9.1 (and producing an error more recently). Numeric values larger 1065 # than PTRDIFF_MAX also don't work prior to version 9.1, which are silently 1066 # ignored, continuing to default to PTRDIFF_MAX. So, left with no other 1067 # choice, we must perform a versioned check to disable this warning. 1068 # https://lore.kernel.org/lkml/20210824115859.187f272f@canb.auug.org.au 1069 KBUILD_CFLAGS-$(call gcc-min-version, 90100) += -Wno-alloc-size-larger-than 1070 KBUILD_CFLAGS += $(KBUILD_CFLAGS-y) $(CONFIG_CC_IMPLICIT_FALLTHROUGH) 1071 1072 # disable invalid "can't wrap" optimizations for signed / pointers 1073 KBUILD_CFLAGS += -fno-strict-overflow 1074 1075 # Make sure -fstack-check isn't enabled (like gentoo apparently did) 1076 KBUILD_CFLAGS += -fno-stack-check 1077 1078 # conserve stack if available 1079 ifdef CONFIG_CC_IS_GCC 1080 KBUILD_CFLAGS += -fconserve-stack 1081 endif 1082 1083 # Prohibit date/time macros, which would make the build non-deterministic 1084 KBUILD_CFLAGS += -Werror=date-time 1085 1086 # enforce correct pointer usage 1087 KBUILD_CFLAGS += $(call cc-option,-Werror=incompatible-pointer-types) 1088 1089 # Require designated initializers for all marked structures 1090 KBUILD_CFLAGS += $(call cc-option,-Werror=designated-init) 1091 1092 # change __FILE__ to the relative path from the srctree 1093 KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) 1094 1095 # include additional Makefiles when needed 1096 include-y := scripts/Makefile.extrawarn 1097 include-$(CONFIG_DEBUG_INFO) += scripts/Makefile.debug 1098 include-$(CONFIG_KASAN) += scripts/Makefile.kasan 1099 include-$(CONFIG_KCSAN) += scripts/Makefile.kcsan 1100 include-$(CONFIG_KMSAN) += scripts/Makefile.kmsan 1101 include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan 1102 include-$(CONFIG_KCOV) += scripts/Makefile.kcov 1103 include-$(CONFIG_RANDSTRUCT) += scripts/Makefile.randstruct 1104 include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins 1105 1106 include $(addprefix $(srctree)/, $(include-y)) 1107 1108 # scripts/Makefile.gcc-plugins is intentionally included last. 1109 # Do not add $(call cc-option,...) below this line. When you build the kernel 1110 # from the clean source tree, the GCC plugins do not exist at this point. 1111 1112 # Add user supplied CPPFLAGS, AFLAGS, CFLAGS and RUSTFLAGS as the last assignments 1113 KBUILD_CPPFLAGS += $(KCPPFLAGS) 1114 KBUILD_AFLAGS += $(KAFLAGS) 1115 KBUILD_CFLAGS += $(KCFLAGS) 1116 KBUILD_RUSTFLAGS += $(KRUSTFLAGS) 1117 1118 KBUILD_LDFLAGS_MODULE += --build-id=sha1 1119 LDFLAGS_vmlinux += --build-id=sha1 1120 1121 KBUILD_LDFLAGS += -z noexecstack 1122 ifeq ($(CONFIG_LD_IS_BFD),y) 1123 KBUILD_LDFLAGS += $(call ld-option,--no-warn-rwx-segments) 1124 endif 1125 1126 ifeq ($(CONFIG_STRIP_ASM_SYMS),y) 1127 LDFLAGS_vmlinux += -X 1128 endif 1129 1130 ifeq ($(CONFIG_RELR),y) 1131 LDFLAGS_vmlinux += --pack-dyn-relocs=relr --use-android-relr-tags 1132 endif 1133 1134 # We never want expected sections to be placed heuristically by the 1135 # linker. All sections should be explicitly named in the linker script. 1136 ifdef CONFIG_LD_ORPHAN_WARN 1137 LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL) 1138 endif 1139 1140 # Align the bit size of userspace programs with the kernel 1141 KBUILD_USERCFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) 1142 KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS)) 1143 1144 # make the checker run with the right architecture 1145 CHECKFLAGS += --arch=$(ARCH) 1146 1147 # insure the checker run with the right endianness 1148 CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian) 1149 1150 # the checker needs the correct machine size 1151 CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32) 1152 1153 # Default kernel image to build when no specific target is given. 1154 # KBUILD_IMAGE may be overruled on the command line or 1155 # set in the environment 1156 # Also any assignments in arch/$(ARCH)/Makefile take precedence over 1157 # this default value 1158 export KBUILD_IMAGE ?= vmlinux 1159 1160 # 1161 # INSTALL_PATH specifies where to place the updated kernel and system map 1162 # images. Default is /boot, but you can set it to other values 1163 export INSTALL_PATH ?= /boot 1164 1165 # 1166 # INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots. 1167 # Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as 1168 # an argument if needed. Otherwise it defaults to the kernel install path 1169 # 1170 export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) 1171 1172 # 1173 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory 1174 # relocations required by build roots. This is not defined in the 1175 # makefile but the argument can be passed to make if needed. 1176 # 1177 1178 MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) 1179 export MODLIB 1180 1181 PHONY += prepare0 1182 1183 export extmod_prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/) 1184 export MODORDER := $(extmod_prefix)modules.order 1185 export MODULES_NSDEPS := $(extmod_prefix)modules.nsdeps 1186 1187 ifeq ($(KBUILD_EXTMOD),) 1188 1189 build-dir := . 1190 clean-dirs := $(sort . Documentation \ 1191 $(patsubst %/,%,$(filter %/, $(core-) \ 1192 $(drivers-) $(libs-)))) 1193 1194 export ARCH_CORE := $(core-y) 1195 export ARCH_LIB := $(filter %/, $(libs-y)) 1196 export ARCH_DRIVERS := $(drivers-y) $(drivers-m) 1197 # Externally visible symbols (used by link-vmlinux.sh) 1198 1199 KBUILD_VMLINUX_OBJS := ./built-in.a 1200 ifdef CONFIG_MODULES 1201 KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y))) 1202 KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y)) 1203 else 1204 KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y)) 1205 endif 1206 1207 export KBUILD_VMLINUX_LIBS 1208 export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds 1209 1210 # Recurse until adjust_autoksyms.sh is satisfied 1211 PHONY += autoksyms_recursive 1212 ifdef CONFIG_TRIM_UNUSED_KSYMS 1213 # For the kernel to actually contain only the needed exported symbols, 1214 # we have to build modules as well to determine what those symbols are. 1215 # (this can be evaluated only once include/config/auto.conf has been included) 1216 KBUILD_MODULES := 1 1217 1218 autoksyms_recursive: $(build-dir) modules.order 1219 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \ 1220 "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive" 1221 endif 1222 1223 autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h) 1224 1225 quiet_cmd_autoksyms_h = GEN $@ 1226 cmd_autoksyms_h = mkdir -p $(dir $@); \ 1227 $(CONFIG_SHELL) $(srctree)/scripts/gen_autoksyms.sh $@ 1228 1229 $(autoksyms_h): 1230 $(call cmd,autoksyms_h) 1231 1232 # '$(AR) mPi' needs 'T' to workaround the bug of llvm-ar <= 14 1233 quiet_cmd_ar_vmlinux.a = AR $@ 1234 cmd_ar_vmlinux.a = \ 1235 rm -f $@; \ 1236 $(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \ 1237 $(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt) 1238 1239 targets += vmlinux.a 1240 vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt autoksyms_recursive FORCE 1241 $(call if_changed,ar_vmlinux.a) 1242 1243 PHONY += vmlinux_o 1244 vmlinux_o: vmlinux.a $(KBUILD_VMLINUX_LIBS) 1245 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux_o 1246 1247 vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o 1248 @: 1249 1250 PHONY += vmlinux 1251 vmlinux: vmlinux.o $(KBUILD_LDS) modpost 1252 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux 1253 1254 # The actual objects are generated when descending, 1255 # make sure no implicit rule kicks in 1256 $(sort $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)): . ; 1257 1258 filechk_kernel.release = \ 1259 echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1260 1261 # Store (new) KERNELRELEASE string in include/config/kernel.release 1262 include/config/kernel.release: FORCE 1263 $(call filechk,kernel.release) 1264 1265 # Additional helpers built in scripts/ 1266 # Carefully list dependencies so we do not try to build scripts twice 1267 # in parallel 1268 PHONY += scripts 1269 scripts: scripts_basic scripts_dtc 1270 $(Q)$(MAKE) $(build)=$(@) 1271 1272 # Things we need to do before we recursively start building the kernel 1273 # or the modules are listed in "prepare". 1274 # A multi level approach is used. prepareN is processed before prepareN-1. 1275 # archprepare is used in arch Makefiles and when processed asm symlink, 1276 # version.h and scripts_basic is processed / created. 1277 1278 PHONY += prepare archprepare 1279 1280 archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \ 1281 asm-generic $(version_h) $(autoksyms_h) include/generated/utsrelease.h \ 1282 include/generated/compile.h include/generated/autoconf.h remove-stale-files 1283 1284 prepare0: archprepare 1285 $(Q)$(MAKE) $(build)=scripts/mod 1286 $(Q)$(MAKE) $(build)=. prepare 1287 1288 # All the preparing.. 1289 prepare: prepare0 1290 ifdef CONFIG_RUST 1291 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh -v 1292 $(Q)$(MAKE) $(build)=rust 1293 endif 1294 1295 PHONY += remove-stale-files 1296 remove-stale-files: 1297 $(Q)$(srctree)/scripts/remove-stale-files 1298 1299 # Support for using generic headers in asm-generic 1300 asm-generic := -f $(srctree)/scripts/Makefile.asm-generic obj 1301 1302 PHONY += asm-generic uapi-asm-generic 1303 asm-generic: uapi-asm-generic 1304 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \ 1305 generic=include/asm-generic 1306 uapi-asm-generic: 1307 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \ 1308 generic=include/uapi/asm-generic 1309 1310 # Generate some files 1311 # --------------------------------------------------------------------------- 1312 1313 # KERNELRELEASE can change from a few different places, meaning version.h 1314 # needs to be updated, so this check is forced on all builds 1315 1316 uts_len := 64 1317 define filechk_utsrelease.h 1318 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ 1319 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ 1320 exit 1; \ 1321 fi; \ 1322 echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" 1323 endef 1324 1325 define filechk_version.h 1326 if [ $(SUBLEVEL) -gt 255 ]; then \ 1327 echo \#define LINUX_VERSION_CODE $(shell \ 1328 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \ 1329 else \ 1330 echo \#define LINUX_VERSION_CODE $(shell \ 1331 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ 1332 fi; \ 1333 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + \ 1334 ((c) > 255 ? 255 : (c)))'; \ 1335 echo \#define LINUX_VERSION_MAJOR $(VERSION); \ 1336 echo \#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL); \ 1337 echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL) 1338 endef 1339 1340 $(version_h): PATCHLEVEL := $(or $(PATCHLEVEL), 0) 1341 $(version_h): SUBLEVEL := $(or $(SUBLEVEL), 0) 1342 $(version_h): FORCE 1343 $(call filechk,version.h) 1344 1345 include/generated/utsrelease.h: include/config/kernel.release FORCE 1346 $(call filechk,utsrelease.h) 1347 1348 filechk_compile.h = $(srctree)/scripts/mkcompile_h \ 1349 "$(UTS_MACHINE)" "$(CONFIG_CC_VERSION_TEXT)" "$(LD)" 1350 1351 include/generated/compile.h: FORCE 1352 $(call filechk,compile.h) 1353 1354 PHONY += headerdep 1355 headerdep: 1356 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ 1357 $(srctree)/scripts/headerdep.pl -I$(srctree)/include 1358 1359 # --------------------------------------------------------------------------- 1360 # Kernel headers 1361 1362 #Default location for installed headers 1363 export INSTALL_HDR_PATH = $(objtree)/usr 1364 1365 quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include 1366 cmd_headers_install = \ 1367 mkdir -p $(INSTALL_HDR_PATH); \ 1368 rsync -mrl --include='*/' --include='*\.h' --exclude='*' \ 1369 usr/include $(INSTALL_HDR_PATH) 1370 1371 PHONY += headers_install 1372 headers_install: headers 1373 $(call cmd,headers_install) 1374 1375 PHONY += archheaders archscripts 1376 1377 hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj 1378 1379 PHONY += headers 1380 headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts 1381 $(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML)) 1382 $(Q)$(MAKE) $(hdr-inst)=include/uapi 1383 $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi 1384 1385 ifdef CONFIG_HEADERS_INSTALL 1386 prepare: headers 1387 endif 1388 1389 PHONY += scripts_unifdef 1390 scripts_unifdef: scripts_basic 1391 $(Q)$(MAKE) $(build)=scripts scripts/unifdef 1392 1393 # --------------------------------------------------------------------------- 1394 # Install 1395 1396 # Many distributions have the custom install script, /sbin/installkernel. 1397 # If DKMS is installed, 'make install' will eventually recurse back 1398 # to this Makefile to build and install external modules. 1399 # Cancel sub_make_done so that options such as M=, V=, etc. are parsed. 1400 1401 quiet_cmd_install = INSTALL $(INSTALL_PATH) 1402 cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh 1403 1404 # --------------------------------------------------------------------------- 1405 # Tools 1406 1407 ifdef CONFIG_OBJTOOL 1408 prepare: tools/objtool 1409 endif 1410 1411 ifdef CONFIG_BPF 1412 ifdef CONFIG_DEBUG_INFO_BTF 1413 prepare: tools/bpf/resolve_btfids 1414 endif 1415 endif 1416 1417 PHONY += resolve_btfids_clean 1418 1419 resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids 1420 1421 # tools/bpf/resolve_btfids directory might not exist 1422 # in output directory, skip its clean in that case 1423 resolve_btfids_clean: 1424 ifneq ($(wildcard $(resolve_btfids_O)),) 1425 $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean 1426 endif 1427 1428 # Clear a bunch of variables before executing the submake 1429 ifeq ($(quiet),silent_) 1430 tools_silent=s 1431 endif 1432 1433 tools/: FORCE 1434 $(Q)mkdir -p $(objtree)/tools 1435 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ 1436 1437 tools/%: FORCE 1438 $(Q)mkdir -p $(objtree)/tools 1439 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $* 1440 1441 # --------------------------------------------------------------------------- 1442 # Kernel selftest 1443 1444 PHONY += kselftest 1445 kselftest: headers 1446 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests 1447 1448 kselftest-%: headers FORCE 1449 $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $* 1450 1451 PHONY += kselftest-merge 1452 kselftest-merge: 1453 $(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!)) 1454 $(Q)find $(srctree)/tools/testing/selftests -name config | \ 1455 xargs $(srctree)/scripts/kconfig/merge_config.sh -m $(objtree)/.config 1456 $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig 1457 1458 # --------------------------------------------------------------------------- 1459 # Devicetree files 1460 1461 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),) 1462 dtstree := arch/$(SRCARCH)/boot/dts 1463 endif 1464 1465 ifneq ($(dtstree),) 1466 1467 %.dtb: dtbs_prepare 1468 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1469 1470 %.dtbo: dtbs_prepare 1471 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1472 1473 PHONY += dtbs dtbs_prepare dtbs_install dtbs_check 1474 dtbs: dtbs_prepare 1475 $(Q)$(MAKE) $(build)=$(dtstree) 1476 1477 # include/config/kernel.release is actually needed when installing DTBs because 1478 # INSTALL_DTBS_PATH contains $(KERNELRELEASE). However, we do not want to make 1479 # dtbs_install depend on it as dtbs_install may run as root. 1480 dtbs_prepare: include/config/kernel.release scripts_dtc 1481 1482 ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),) 1483 export CHECK_DTBS=y 1484 dtbs: dt_binding_check 1485 endif 1486 1487 dtbs_check: dtbs 1488 1489 dtbs_install: 1490 $(Q)$(MAKE) $(dtbinst)=$(dtstree) dst=$(INSTALL_DTBS_PATH) 1491 1492 ifdef CONFIG_OF_EARLY_FLATTREE 1493 all: dtbs 1494 endif 1495 1496 endif 1497 1498 PHONY += scripts_dtc 1499 scripts_dtc: scripts_basic 1500 $(Q)$(MAKE) $(build)=scripts/dtc 1501 1502 ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),) 1503 export CHECK_DT_BINDING=y 1504 endif 1505 1506 PHONY += dt_binding_check 1507 dt_binding_check: scripts_dtc 1508 $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings 1509 1510 PHONY += dt_compatible_check 1511 dt_compatible_check: dt_binding_check 1512 $(Q)$(MAKE) $(build)=Documentation/devicetree/bindings $@ 1513 1514 # --------------------------------------------------------------------------- 1515 # Modules 1516 1517 ifdef CONFIG_MODULES 1518 1519 # By default, build modules as well 1520 1521 all: modules 1522 1523 # When we're building modules with modversions, we need to consider 1524 # the built-in objects during the descend as well, in order to 1525 # make sure the checksums are up to date before we record them. 1526 ifdef CONFIG_MODVERSIONS 1527 KBUILD_BUILTIN := 1 1528 endif 1529 1530 # Build modules 1531 # 1532 1533 # *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFOBTF_MODULES 1534 # is an exception. 1535 ifdef CONFIG_DEBUG_INFO_BTF_MODULES 1536 modules: vmlinux 1537 endif 1538 1539 modules: modules_prepare 1540 1541 # Target to prepare building external modules 1542 modules_prepare: prepare 1543 $(Q)$(MAKE) $(build)=scripts scripts/module.lds 1544 1545 export modules_sign_only := 1546 1547 ifeq ($(CONFIG_MODULE_SIG),y) 1548 PHONY += modules_sign 1549 modules_sign: modules_install 1550 @: 1551 1552 # modules_sign is a subset of modules_install. 1553 # 'make modules_install modules_sign' is equivalent to 'make modules_install'. 1554 ifeq ($(filter modules_install,$(MAKECMDGOALS)),) 1555 modules_sign_only := y 1556 endif 1557 endif 1558 1559 modinst_pre := 1560 ifneq ($(filter modules_install,$(MAKECMDGOALS)),) 1561 modinst_pre := __modinst_pre 1562 endif 1563 1564 modules_install: $(modinst_pre) 1565 PHONY += __modinst_pre 1566 __modinst_pre: 1567 @rm -rf $(MODLIB)/kernel 1568 @rm -f $(MODLIB)/source 1569 @mkdir -p $(MODLIB)/kernel 1570 @ln -s $(abspath $(srctree)) $(MODLIB)/source 1571 @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ 1572 rm -f $(MODLIB)/build ; \ 1573 ln -s $(CURDIR) $(MODLIB)/build ; \ 1574 fi 1575 @sed 's:^\(.*\)\.o$$:kernel/\1.ko:' modules.order > $(MODLIB)/modules.order 1576 @cp -f modules.builtin $(MODLIB)/ 1577 @cp -f $(objtree)/modules.builtin.modinfo $(MODLIB)/ 1578 1579 endif # CONFIG_MODULES 1580 1581 ### 1582 # Cleaning is done on three levels. 1583 # make clean Delete most generated files 1584 # Leave enough to build external modules 1585 # make mrproper Delete the current configuration, and all generated files 1586 # make distclean Remove editor backup files, patch leftover files and the like 1587 1588 # Directories & files removed with 'make clean' 1589 CLEAN_FILES += include/ksym vmlinux.symvers modules-only.symvers \ 1590 modules.builtin modules.builtin.modinfo modules.nsdeps \ 1591 compile_commands.json .thinlto-cache rust/test rust/doc \ 1592 .vmlinux.objs .vmlinux.export.c 1593 1594 # Directories & files removed with 'make mrproper' 1595 MRPROPER_FILES += include/config include/generated \ 1596 arch/$(SRCARCH)/include/generated .objdiff \ 1597 debian snap tar-install \ 1598 .config .config.old .version \ 1599 Module.symvers \ 1600 certs/signing_key.pem \ 1601 certs/x509.genkey \ 1602 vmlinux-gdb.py \ 1603 *.spec \ 1604 rust/target.json rust/libmacros.so 1605 1606 # clean - Delete most, but leave enough to build external modules 1607 # 1608 clean: rm-files := $(CLEAN_FILES) 1609 1610 PHONY += archclean vmlinuxclean 1611 1612 vmlinuxclean: 1613 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean 1614 $(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean) 1615 1616 clean: archclean vmlinuxclean resolve_btfids_clean 1617 1618 # mrproper - Delete all generated files, including .config 1619 # 1620 mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1621 mrproper-dirs := $(addprefix _mrproper_,scripts) 1622 1623 PHONY += $(mrproper-dirs) mrproper 1624 $(mrproper-dirs): 1625 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1626 1627 mrproper: clean $(mrproper-dirs) 1628 $(call cmd,rmfiles) 1629 @find . $(RCS_FIND_IGNORE) \ 1630 \( -name '*.rmeta' \) \ 1631 -type f -print | xargs rm -f 1632 1633 # distclean 1634 # 1635 PHONY += distclean 1636 1637 distclean: mrproper 1638 @find . $(RCS_FIND_IGNORE) \ 1639 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1640 -o -name '*.bak' -o -name '#*#' -o -name '*%' \ 1641 -o -name 'core' -o -name tags -o -name TAGS -o -name 'cscope*' \ 1642 -o -name GPATH -o -name GRTAGS -o -name GSYMS -o -name GTAGS \) \ 1643 -type f -print | xargs rm -f 1644 1645 1646 # Packaging of the kernel to various formats 1647 # --------------------------------------------------------------------------- 1648 1649 %src-pkg: FORCE 1650 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1651 %pkg: include/config/kernel.release FORCE 1652 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1653 1654 # Brief documentation of the typical targets used 1655 # --------------------------------------------------------------------------- 1656 1657 boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) 1658 boards := $(sort $(notdir $(boards))) 1659 board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) 1660 board-dirs := $(sort $(notdir $(board-dirs:/=))) 1661 1662 PHONY += help 1663 help: 1664 @echo 'Cleaning targets:' 1665 @echo ' clean - Remove most generated files but keep the config and' 1666 @echo ' enough build support to build external modules' 1667 @echo ' mrproper - Remove all generated files + config + various backup files' 1668 @echo ' distclean - mrproper + remove editor backup and patch files' 1669 @echo '' 1670 @echo 'Configuration targets:' 1671 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1672 @echo '' 1673 @echo 'Other generic targets:' 1674 @echo ' all - Build all targets marked with [*]' 1675 @echo '* vmlinux - Build the bare kernel' 1676 @echo '* modules - Build all modules' 1677 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' 1678 @echo ' dir/ - Build all files in dir and below' 1679 @echo ' dir/file.[ois] - Build specified target only' 1680 @echo ' dir/file.ll - Build the LLVM assembly file' 1681 @echo ' (requires compiler support for LLVM assembly generation)' 1682 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1683 @echo ' (requires a recent binutils and recent build (System.map))' 1684 @echo ' dir/file.ko - Build module including final link' 1685 @echo ' modules_prepare - Set up for building external modules' 1686 @echo ' tags/TAGS - Generate tags file for editors' 1687 @echo ' cscope - Generate cscope index' 1688 @echo ' gtags - Generate GNU GLOBAL index' 1689 @echo ' kernelrelease - Output the release version string (use with make -s)' 1690 @echo ' kernelversion - Output the version stored in Makefile (use with make -s)' 1691 @echo ' image_name - Output the image name (use with make -s)' 1692 @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ 1693 echo ' (default: $(INSTALL_HDR_PATH))'; \ 1694 echo '' 1695 @echo 'Static analysers:' 1696 @echo ' checkstack - Generate a list of stack hogs' 1697 @echo ' versioncheck - Sanity check on version.h usage' 1698 @echo ' includecheck - Check for duplicate included header files' 1699 @echo ' export_report - List the usages of all exported symbols' 1700 @echo ' headerdep - Detect inclusion cycles in headers' 1701 @echo ' coccicheck - Check with Coccinelle' 1702 @echo ' clang-analyzer - Check with clang static analyzer' 1703 @echo ' clang-tidy - Check with clang-tidy' 1704 @echo '' 1705 @echo 'Tools:' 1706 @echo ' nsdeps - Generate missing symbol namespace dependencies' 1707 @echo '' 1708 @echo 'Kernel selftest:' 1709 @echo ' kselftest - Build and run kernel selftest' 1710 @echo ' Build, install, and boot kernel before' 1711 @echo ' running kselftest on it' 1712 @echo ' Run as root for full coverage' 1713 @echo ' kselftest-all - Build kernel selftest' 1714 @echo ' kselftest-install - Build and install kernel selftest' 1715 @echo ' kselftest-clean - Remove all generated kselftest files' 1716 @echo ' kselftest-merge - Merge all the config dependencies of' 1717 @echo ' kselftest to existing .config.' 1718 @echo '' 1719 @echo 'Rust targets:' 1720 @echo ' rustavailable - Checks whether the Rust toolchain is' 1721 @echo ' available and, if not, explains why.' 1722 @echo ' rustfmt - Reformat all the Rust code in the kernel' 1723 @echo ' rustfmtcheck - Checks if all the Rust code in the kernel' 1724 @echo ' is formatted, printing a diff otherwise.' 1725 @echo ' rustdoc - Generate Rust documentation' 1726 @echo ' (requires kernel .config)' 1727 @echo ' rusttest - Runs the Rust tests' 1728 @echo ' (requires kernel .config; downloads external repos)' 1729 @echo ' rust-analyzer - Generate rust-project.json rust-analyzer support file' 1730 @echo ' (requires kernel .config)' 1731 @echo ' dir/file.[os] - Build specified target only' 1732 @echo ' dir/file.rsi - Build macro expanded source, similar to C preprocessing.' 1733 @echo ' Run with RUSTFMT=n to skip reformatting if needed.' 1734 @echo ' The output is not intended to be compilable.' 1735 @echo ' dir/file.ll - Build the LLVM assembly file' 1736 @echo '' 1737 @$(if $(dtstree), \ 1738 echo 'Devicetree:'; \ 1739 echo '* dtbs - Build device tree blobs for enabled boards'; \ 1740 echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \ 1741 echo ' dt_binding_check - Validate device tree binding documents'; \ 1742 echo ' dtbs_check - Validate device tree source files';\ 1743 echo '') 1744 1745 @echo 'Userspace tools targets:' 1746 @echo ' use "make tools/help"' 1747 @echo ' or "cd tools; make help"' 1748 @echo '' 1749 @echo 'Kernel packaging:' 1750 @$(MAKE) -f $(srctree)/scripts/Makefile.package help 1751 @echo '' 1752 @echo 'Documentation targets:' 1753 @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp 1754 @echo '' 1755 @echo 'Architecture specific targets ($(SRCARCH)):' 1756 @$(or $(archhelp),\ 1757 echo ' No architecture specific help defined for $(SRCARCH)') 1758 @echo '' 1759 @$(if $(boards), \ 1760 $(foreach b, $(boards), \ 1761 printf " %-27s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ 1762 echo '') 1763 @$(if $(board-dirs), \ 1764 $(foreach b, $(board-dirs), \ 1765 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \ 1766 printf " %-16s - Show all of the above\\n" help-boards; \ 1767 echo '') 1768 1769 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' 1770 @echo ' make V=2 [targets] 2 => give reason for rebuild of target' 1771 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1772 @echo ' make C=1 [targets] Check re-compiled c source with $$CHECK' 1773 @echo ' (sparse by default)' 1774 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1775 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1776 @echo ' make W=n [targets] Enable extra build checks, n=1,2,3 where' 1777 @echo ' 1: warnings which may be relevant and do not occur too often' 1778 @echo ' 2: warnings which occur quite often but may still be relevant' 1779 @echo ' 3: more obscure warnings, can most likely be ignored' 1780 @echo ' e: warnings are being treated as errors' 1781 @echo ' Multiple levels can be combined with W=12 or W=123' 1782 @echo '' 1783 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1784 @echo 'For further info see the ./README file' 1785 1786 1787 help-board-dirs := $(addprefix help-,$(board-dirs)) 1788 1789 help-boards: $(help-board-dirs) 1790 1791 boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))) 1792 1793 $(help-board-dirs): help-%: 1794 @echo 'Architecture specific targets ($(SRCARCH) $*):' 1795 @$(if $(boards-per-dir), \ 1796 $(foreach b, $(boards-per-dir), \ 1797 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \ 1798 echo '') 1799 1800 1801 # Documentation targets 1802 # --------------------------------------------------------------------------- 1803 DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ 1804 linkcheckdocs dochelp refcheckdocs texinfodocs infodocs 1805 PHONY += $(DOC_TARGETS) 1806 $(DOC_TARGETS): 1807 $(Q)$(MAKE) $(build)=Documentation $@ 1808 1809 1810 # Rust targets 1811 # --------------------------------------------------------------------------- 1812 1813 # "Is Rust available?" target 1814 PHONY += rustavailable 1815 rustavailable: 1816 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh -v && echo "Rust is available!" 1817 1818 # Documentation target 1819 # 1820 # Using the singular to avoid running afoul of `no-dot-config-targets`. 1821 PHONY += rustdoc 1822 rustdoc: prepare 1823 $(Q)$(MAKE) $(build)=rust $@ 1824 1825 # Testing target 1826 PHONY += rusttest 1827 rusttest: prepare 1828 $(Q)$(MAKE) $(build)=rust $@ 1829 1830 # Formatting targets 1831 PHONY += rustfmt rustfmtcheck 1832 1833 # We skip `rust/alloc` since we want to minimize the diff w.r.t. upstream. 1834 # 1835 # We match using absolute paths since `find` does not resolve them 1836 # when matching, which is a problem when e.g. `srctree` is `..`. 1837 # We `grep` afterwards in order to remove the directory entry itself. 1838 rustfmt: 1839 $(Q)find $(abs_srctree) -type f -name '*.rs' \ 1840 -o -path $(abs_srctree)/rust/alloc -prune \ 1841 -o -path $(abs_objtree)/rust/test -prune \ 1842 | grep -Fv $(abs_srctree)/rust/alloc \ 1843 | grep -Fv $(abs_objtree)/rust/test \ 1844 | grep -Fv generated \ 1845 | xargs $(RUSTFMT) $(rustfmt_flags) 1846 1847 rustfmtcheck: rustfmt_flags = --check 1848 rustfmtcheck: rustfmt 1849 1850 # IDE support targets 1851 PHONY += rust-analyzer 1852 rust-analyzer: 1853 $(Q)$(MAKE) $(build)=rust $@ 1854 1855 # Misc 1856 # --------------------------------------------------------------------------- 1857 1858 PHONY += scripts_gdb 1859 scripts_gdb: prepare0 1860 $(Q)$(MAKE) $(build)=scripts/gdb 1861 $(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py) 1862 1863 ifdef CONFIG_GDB_SCRIPTS 1864 all: scripts_gdb 1865 endif 1866 1867 else # KBUILD_EXTMOD 1868 1869 ### 1870 # External module support. 1871 # When building external modules the kernel used as basis is considered 1872 # read-only, and no consistency checks are made and the make 1873 # system is not used on the basis kernel. If updates are required 1874 # in the basis kernel ordinary make commands (without M=...) must be used. 1875 1876 # We are always building only modules. 1877 KBUILD_BUILTIN := 1878 KBUILD_MODULES := 1 1879 1880 build-dir := $(KBUILD_EXTMOD) 1881 1882 compile_commands.json: $(extmod_prefix)compile_commands.json 1883 PHONY += compile_commands.json 1884 1885 clean-dirs := $(KBUILD_EXTMOD) 1886 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps \ 1887 $(KBUILD_EXTMOD)/compile_commands.json $(KBUILD_EXTMOD)/.thinlto-cache 1888 1889 PHONY += prepare 1890 # now expand this into a simple variable to reduce the cost of shell evaluations 1891 prepare: CC_VERSION_TEXT := $(CC_VERSION_TEXT) 1892 prepare: 1893 @if [ "$(CC_VERSION_TEXT)" != "$(CONFIG_CC_VERSION_TEXT)" ]; then \ 1894 echo >&2 "warning: the compiler differs from the one used to build the kernel"; \ 1895 echo >&2 " The kernel was built by: $(CONFIG_CC_VERSION_TEXT)"; \ 1896 echo >&2 " You are using: $(CC_VERSION_TEXT)"; \ 1897 fi 1898 1899 PHONY += help 1900 help: 1901 @echo ' Building external modules.' 1902 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' 1903 @echo '' 1904 @echo ' modules - default target, build the module(s)' 1905 @echo ' modules_install - install the module' 1906 @echo ' clean - remove generated files in module directory only' 1907 @echo '' 1908 1909 endif # KBUILD_EXTMOD 1910 1911 # --------------------------------------------------------------------------- 1912 # Modules 1913 1914 PHONY += modules modules_install modules_prepare 1915 1916 ifdef CONFIG_MODULES 1917 1918 $(MODORDER): $(build-dir) 1919 @: 1920 1921 # KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. 1922 # This is solely useful to speed up test compiles. 1923 modules: modpost 1924 ifneq ($(KBUILD_MODPOST_NOFINAL),1) 1925 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal 1926 endif 1927 1928 PHONY += modules_check 1929 modules_check: $(MODORDER) 1930 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $< 1931 1932 quiet_cmd_depmod = DEPMOD $(MODLIB) 1933 cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ 1934 $(KERNELRELEASE) 1935 1936 modules_install: 1937 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst 1938 $(call cmd,depmod) 1939 1940 else # CONFIG_MODULES 1941 1942 # Modules not configured 1943 # --------------------------------------------------------------------------- 1944 1945 modules modules_install: 1946 @echo >&2 '***' 1947 @echo >&2 '*** The present kernel configuration has modules disabled.' 1948 @echo >&2 '*** To use the module feature, please run "make menuconfig" etc.' 1949 @echo >&2 '*** to enable CONFIG_MODULES.' 1950 @echo >&2 '***' 1951 @exit 1 1952 1953 KBUILD_MODULES := 1954 1955 endif # CONFIG_MODULES 1956 1957 PHONY += modpost 1958 modpost: $(if $(single-build),, $(if $(KBUILD_BUILTIN), vmlinux.o)) \ 1959 $(if $(KBUILD_MODULES), modules_check) 1960 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1961 1962 # Single targets 1963 # --------------------------------------------------------------------------- 1964 # To build individual files in subdirectories, you can do like this: 1965 # 1966 # make foo/bar/baz.s 1967 # 1968 # The supported suffixes for single-target are listed in 'single-targets' 1969 # 1970 # To build only under specific subdirectories, you can do like this: 1971 # 1972 # make foo/bar/baz/ 1973 1974 ifdef single-build 1975 1976 # .ko is special because modpost is needed 1977 single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS))) 1978 single-no-ko := $(filter-out $(single-ko), $(MAKECMDGOALS)) \ 1979 $(foreach x, o mod, $(patsubst %.ko, %.$x, $(single-ko))) 1980 1981 $(single-ko): single_modules 1982 @: 1983 $(single-no-ko): $(build-dir) 1984 @: 1985 1986 # Remove MODORDER when done because it is not the real one. 1987 PHONY += single_modules 1988 single_modules: $(single-no-ko) modules_prepare 1989 $(Q){ $(foreach m, $(single-ko), echo $(extmod_prefix)$m;) } > $(MODORDER) 1990 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1991 ifneq ($(KBUILD_MODPOST_NOFINAL),1) 1992 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal 1993 endif 1994 $(Q)rm -f $(MODORDER) 1995 1996 single-goals := $(addprefix $(build-dir)/, $(single-no-ko)) 1997 1998 KBUILD_MODULES := 1 1999 2000 endif 2001 2002 # Preset locale variables to speed up the build process. Limit locale 2003 # tweaks to this spot to avoid wrong language settings when running 2004 # make menuconfig etc. 2005 # Error messages still appears in the original language 2006 PHONY += $(build-dir) 2007 $(build-dir): prepare 2008 $(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1 $(single-goals) 2009 2010 clean-dirs := $(addprefix _clean_, $(clean-dirs)) 2011 PHONY += $(clean-dirs) clean 2012 $(clean-dirs): 2013 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 2014 2015 clean: $(clean-dirs) 2016 $(call cmd,rmfiles) 2017 @find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 2018 \( -name '*.[aios]' -o -name '*.rsi' -o -name '*.ko' -o -name '.*.cmd' \ 2019 -o -name '*.ko.*' \ 2020 -o -name '*.dtb' -o -name '*.dtbo' \ 2021 -o -name '*.dtb.S' -o -name '*.dtbo.S' \ 2022 -o -name '*.dt.yaml' \ 2023 -o -name '*.dwo' -o -name '*.lst' \ 2024 -o -name '*.su' -o -name '*.mod' -o -name '*.usyms' \ 2025 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 2026 -o -name '*.lex.c' -o -name '*.tab.[ch]' \ 2027 -o -name '*.asn1.[ch]' \ 2028 -o -name '*.symtypes' -o -name 'modules.order' \ 2029 -o -name '.tmp_*' \ 2030 -o -name '*.c.[012]*.*' \ 2031 -o -name '*.ll' \ 2032 -o -name '*.gcno' \ 2033 -o -name '*.*.symversions' \) -type f -print | xargs rm -f 2034 2035 # Generate tags for editors 2036 # --------------------------------------------------------------------------- 2037 quiet_cmd_tags = GEN $@ 2038 cmd_tags = $(BASH) $(srctree)/scripts/tags.sh $@ 2039 2040 tags TAGS cscope gtags: FORCE 2041 $(call cmd,tags) 2042 2043 # Script to generate missing namespace dependencies 2044 # --------------------------------------------------------------------------- 2045 2046 PHONY += nsdeps 2047 nsdeps: export KBUILD_NSDEPS=1 2048 nsdeps: modules 2049 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/nsdeps 2050 2051 # Clang Tooling 2052 # --------------------------------------------------------------------------- 2053 2054 quiet_cmd_gen_compile_commands = GEN $@ 2055 cmd_gen_compile_commands = $(PYTHON3) $< -a $(AR) -o $@ $(filter-out $<, $(real-prereqs)) 2056 2057 $(extmod_prefix)compile_commands.json: scripts/clang-tools/gen_compile_commands.py \ 2058 $(if $(KBUILD_EXTMOD),, vmlinux.a $(KBUILD_VMLINUX_LIBS)) \ 2059 $(if $(CONFIG_MODULES), $(MODORDER)) FORCE 2060 $(call if_changed,gen_compile_commands) 2061 2062 targets += $(extmod_prefix)compile_commands.json 2063 2064 PHONY += clang-tidy clang-analyzer 2065 2066 ifdef CONFIG_CC_IS_CLANG 2067 quiet_cmd_clang_tools = CHECK $< 2068 cmd_clang_tools = $(PYTHON3) $(srctree)/scripts/clang-tools/run-clang-tools.py $@ $< 2069 2070 clang-tidy clang-analyzer: $(extmod_prefix)compile_commands.json 2071 $(call cmd,clang_tools) 2072 else 2073 clang-tidy clang-analyzer: 2074 @echo "$@ requires CC=clang" >&2 2075 @false 2076 endif 2077 2078 # Scripts to check various things for consistency 2079 # --------------------------------------------------------------------------- 2080 2081 PHONY += includecheck versioncheck coccicheck export_report 2082 2083 includecheck: 2084 find $(srctree)/* $(RCS_FIND_IGNORE) \ 2085 -name '*.[hcS]' -type f -print | sort \ 2086 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl 2087 2088 versioncheck: 2089 find $(srctree)/* $(RCS_FIND_IGNORE) \ 2090 -name '*.[hcS]' -type f -print | sort \ 2091 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl 2092 2093 coccicheck: 2094 $(Q)$(BASH) $(srctree)/scripts/$@ 2095 2096 export_report: 2097 $(PERL) $(srctree)/scripts/export_report.pl 2098 2099 PHONY += checkstack kernelrelease kernelversion image_name 2100 2101 # UML needs a little special treatment here. It wants to use the host 2102 # toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone 2103 # else wants $(ARCH), including people doing cross-builds, which means 2104 # that $(SUBARCH) doesn't work here. 2105 ifeq ($(ARCH), um) 2106 CHECKSTACK_ARCH := $(SUBARCH) 2107 else 2108 CHECKSTACK_ARCH := $(ARCH) 2109 endif 2110 checkstack: 2111 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ 2112 $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) 2113 2114 kernelrelease: 2115 @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 2116 2117 kernelversion: 2118 @echo $(KERNELVERSION) 2119 2120 image_name: 2121 @echo $(KBUILD_IMAGE) 2122 2123 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 2124 cmd_rmfiles = rm -rf $(rm-files) 2125 2126 # read saved command lines for existing targets 2127 existing-targets := $(wildcard $(sort $(targets))) 2128 2129 -include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) 2130 2131 endif # config-build 2132 endif # mixed-build 2133 endif # need-sub-make 2134 2135 PHONY += FORCE 2136 FORCE: 2137 2138 # Declare the contents of the PHONY variable as phony. We keep that 2139 # information in a variable so we can use it in if_changed and friends. 2140 .PHONY: $(PHONY) 2141