1# SPDX-License-Identifier: GPL-2.0 2VERSION = 7 3PATCHLEVEL = 3 4SUBLEVEL = 0 5EXTRAVERSION = 6NAME = Baby Opossum Posse 7 8# *DOCUMENTATION* 9# To see a list of typical targets execute "make help" 10# More info can be located in ./README 11# Comments in this file are targeted only to the developer, do not 12# expect to learn how to build the kernel reading this file. 13 14ifeq ($(filter output-sync,$(.FEATURES)),) 15$(error GNU Make >= 4.0 is required. Your Make version is $(MAKE_VERSION)) 16endif 17 18$(if $(filter __%, $(MAKECMDGOALS)), \ 19 $(error targets prefixed with '__' are only for internal use)) 20 21# That's our default target when none is given on the command line 22PHONY := __all 23__all: 24 25# We are using a recursive build, so we need to do a little thinking 26# to get the ordering right. 27# 28# Most importantly: sub-Makefiles should only ever modify files in 29# their own directory. If in some directory we have a dependency on 30# a file in another dir (which doesn't happen often, but it's often 31# unavoidable when linking the built-in.a targets which finally 32# turn into vmlinux), we will call a sub make in that other dir, and 33# after that we are sure that everything which is in that other dir 34# is now up to date. 35# 36# The only cases where we need to modify files which have global 37# effects are thus separated out and done before the recursive 38# descending is started. They are now explicitly listed as the 39# prepare rule. 40 41this-makefile := $(lastword $(MAKEFILE_LIST)) 42abs_srctree := $(realpath $(dir $(this-makefile))) 43abs_output := $(CURDIR) 44 45ifneq ($(sub_make_done),1) 46 47# Do not use make's built-in rules and variables 48# (this increases performance and avoids hard-to-debug behaviour) 49MAKEFLAGS += -rR 50 51# Avoid funny character set dependencies 52unexport LC_ALL 53LC_COLLATE=C 54LC_NUMERIC=C 55export LC_COLLATE LC_NUMERIC 56 57# Avoid interference with shell env settings 58unexport GREP_OPTIONS 59 60# Beautify output 61# --------------------------------------------------------------------------- 62# 63# Most of build commands in Kbuild start with "cmd_". You can optionally define 64# "quiet_cmd_*". If defined, the short log is printed. Otherwise, no log from 65# that command is printed by default. 66# 67# e.g.) 68# quiet_cmd_depmod = DEPMOD $(MODLIB) 69# cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE) 70# 71# A simple variant is to prefix commands with $(Q) - that's useful 72# for commands that shall be hidden in non-verbose mode. 73# 74# $(Q)$(MAKE) $(build)=scripts/basic 75# 76# If KBUILD_VERBOSE contains 1, the whole command is echoed. 77# If KBUILD_VERBOSE contains 2, the reason for rebuilding is printed. 78# 79# To put more focus on warnings, be less verbose as default 80# Use 'make V=1' to see the full commands 81 82ifeq ("$(origin V)", "command line") 83 KBUILD_VERBOSE = $(V) 84endif 85 86quiet = quiet_ 87Q = @ 88 89ifneq ($(findstring 1, $(KBUILD_VERBOSE)),) 90 quiet = 91 Q = 92endif 93 94# If the user is running make -s (silent mode), suppress echoing of 95# commands 96ifneq ($(findstring s,$(firstword -$(MAKEFLAGS))),) 97quiet=silent_ 98override KBUILD_VERBOSE := 99endif 100 101export quiet Q KBUILD_VERBOSE 102 103# Call a source code checker (by default, "sparse") as part of the 104# C compilation. 105# 106# Use 'make C=1' to enable checking of only re-compiled files. 107# Use 'make C=2' to enable checking of *all* source files, regardless 108# of whether they are re-compiled or not. 109# 110# See the file "Documentation/dev-tools/sparse.rst" for more details, 111# including where to get the "sparse" utility. 112 113ifeq ("$(origin C)", "command line") 114 KBUILD_CHECKSRC = $(C) 115endif 116ifndef KBUILD_CHECKSRC 117 KBUILD_CHECKSRC = 0 118endif 119 120export KBUILD_CHECKSRC 121 122# Enable "clippy" (a linter) as part of the Rust compilation. 123# 124# Use 'make CLIPPY=1' to enable it. 125ifeq ("$(origin CLIPPY)", "command line") 126 KBUILD_CLIPPY := $(CLIPPY) 127endif 128 129export KBUILD_CLIPPY 130 131# Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the 132# directory of external module to build. Setting M= takes precedence. 133ifeq ("$(origin M)", "command line") 134 KBUILD_EXTMOD := $(M) 135endif 136 137ifeq ("$(origin MO)", "command line") 138 KBUILD_EXTMOD_OUTPUT := $(MO) 139endif 140 141$(if $(word 2, $(KBUILD_EXTMOD)), \ 142 $(error building multiple external modules is not supported)) 143 144$(foreach x, % :, $(if $(findstring $x, $(KBUILD_EXTMOD)), \ 145 $(error module directory path cannot contain '$x'))) 146 147# Remove trailing slashes 148ifneq ($(filter %/, $(KBUILD_EXTMOD)),) 149KBUILD_EXTMOD := $(shell dirname $(KBUILD_EXTMOD).) 150endif 151 152export KBUILD_EXTMOD 153 154ifeq ("$(origin W)", "command line") 155 KBUILD_EXTRA_WARN := $(W) 156endif 157 158export KBUILD_EXTRA_WARN 159 160# Kbuild will save output files in the current working directory. 161# This does not need to match to the root of the kernel source tree. 162# 163# For example, you can do this: 164# 165# cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile 166# 167# If you want to save output files in a different location, there are 168# two syntaxes to specify it. 169# 170# 1) O= 171# Use "make O=dir/to/store/output/files/" 172# 173# 2) Set KBUILD_OUTPUT 174# Set the environment variable KBUILD_OUTPUT to point to the output directory. 175# export KBUILD_OUTPUT=dir/to/store/output/files/; make 176# 177# The O= assignment takes precedence over the KBUILD_OUTPUT environment 178# variable. 179 180ifeq ("$(origin O)", "command line") 181 KBUILD_OUTPUT := $(O) 182endif 183 184ifdef KBUILD_EXTMOD 185 ifdef KBUILD_OUTPUT 186 objtree := $(realpath $(KBUILD_OUTPUT)) 187 $(if $(objtree),,$(error specified kernel directory "$(KBUILD_OUTPUT)" does not exist)) 188 else 189 objtree := $(abs_srctree) 190 endif 191 # If Make is invoked from the kernel directory (either kernel 192 # source directory or kernel build directory), external modules 193 # are built in $(KBUILD_EXTMOD) for backward compatibility, 194 # otherwise, built in the current directory. 195 output := $(or $(KBUILD_EXTMOD_OUTPUT),$(if $(filter $(CURDIR),$(objtree) $(abs_srctree)),$(KBUILD_EXTMOD))) 196 # KBUILD_EXTMOD might be a relative path. Remember its absolute path before 197 # Make changes the working directory. 198 srcroot := $(realpath $(KBUILD_EXTMOD)) 199 $(if $(srcroot),,$(error specified external module directory "$(KBUILD_EXTMOD)" does not exist)) 200else 201 objtree := . 202 output := $(KBUILD_OUTPUT) 203endif 204 205export objtree srcroot 206 207# Do we want to change the working directory? 208ifneq ($(output),) 209# $(realpath ...) gets empty if the path does not exist. Run 'mkdir -p' first. 210$(shell mkdir -p "$(output)") 211# $(realpath ...) resolves symlinks 212abs_output := $(realpath $(output)) 213$(if $(abs_output),,$(error failed to create output directory "$(output)")) 214endif 215 216ifneq ($(words $(subst :, ,$(abs_srctree))), 1) 217$(error source directory cannot contain spaces or colons) 218endif 219 220export sub_make_done := 1 221 222endif # sub_make_done 223 224ifeq ($(abs_output),$(CURDIR)) 225# Suppress "Entering directory ..." if we are at the final work directory. 226no-print-directory := --no-print-directory 227else 228# Recursion to show "Entering directory ..." 229need-sub-make := 1 230endif 231 232ifeq ($(filter --no-print-directory, $(MAKEFLAGS)),) 233# If --no-print-directory is unset, recurse once again to set it. 234# You may end up recursing into __sub-make twice. This is needed due to the 235# behavior change in GNU Make 4.4.1. 236need-sub-make := 1 237endif 238 239ifeq ($(need-sub-make),1) 240 241PHONY += $(MAKECMDGOALS) __sub-make 242 243$(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make 244 @: 245 246# Invoke a second make in the output directory, passing relevant variables 247__sub-make: 248 $(Q)$(MAKE) $(no-print-directory) -C $(abs_output) \ 249 -f $(abs_srctree)/Makefile $(MAKECMDGOALS) 250 251else # need-sub-make 252 253# We process the rest of the Makefile if this is the final invocation of make 254 255ifndef KBUILD_EXTMOD 256srcroot := $(abs_srctree) 257endif 258 259ifeq ($(srcroot),$(CURDIR)) 260building_out_of_srctree := 261else 262export building_out_of_srctree := 1 263endif 264 265ifdef KBUILD_ABS_SRCTREE 266 # Do nothing. Use the absolute path. 267else ifeq ($(srcroot),$(CURDIR)) 268 # Building in the source. 269 srcroot := . 270else ifeq ($(srcroot)/,$(dir $(CURDIR))) 271 # Building in a subdirectory of the source. 272 srcroot := .. 273endif 274 275export srctree := $(if $(KBUILD_EXTMOD),$(abs_srctree),$(srcroot)) 276 277ifdef building_out_of_srctree 278export VPATH := $(srcroot) 279else 280VPATH := 281endif 282 283# To make sure we do not include .config for any of the *config targets 284# catch them early, and hand them over to scripts/kconfig/Makefile 285# It is allowed to specify more targets when calling make, including 286# mixing *config targets and build targets. 287# For example 'make oldconfig all'. 288# Detect when mixed targets is specified, and make a second invocation 289# of make so .config is not included in this case either (for *config). 290 291version_h := include/generated/uapi/linux/version.h 292 293clean-targets := %clean mrproper cleandocs 294no-dot-config-targets := $(clean-targets) \ 295 cscope gtags TAGS tags help% %docs check% coccicheck \ 296 kconfig-sym-check \ 297 $(version_h) headers headers_% archheaders archscripts \ 298 %asm-generic kernelversion %src-pkg dt_binding_check \ 299 dt_style_selftest \ 300 outputmakefile rustavailable rustfmt rustfmtcheck \ 301 scripts_gen_init_cpio \ 302 run-command 303no-sync-config-targets := $(no-dot-config-targets) %install modules_sign kernelrelease \ 304 image_name 305single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.rsi %.s %.header-check %/ 306 307config-build := 308mixed-build := 309need-config := 1 310may-sync-config := 1 311single-build := 312 313ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 314 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 315 need-config := 316 endif 317endif 318 319ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),) 320 ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),) 321 may-sync-config := 322 endif 323endif 324 325need-compiler := $(may-sync-config) 326 327ifneq ($(KBUILD_EXTMOD),) 328 may-sync-config := 329endif 330 331ifeq ($(KBUILD_EXTMOD),) 332 ifneq ($(filter %config,$(MAKECMDGOALS)),) 333 config-build := 1 334 ifneq ($(words $(MAKECMDGOALS)),1) 335 mixed-build := 1 336 endif 337 endif 338endif 339 340# We cannot build single targets and the others at the same time 341ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),) 342 single-build := 1 343 ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),) 344 mixed-build := 1 345 endif 346endif 347 348# For "make -j clean all", "make -j mrproper defconfig all", etc. 349ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),) 350 ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),) 351 mixed-build := 1 352 endif 353endif 354 355# install and modules_install need also be processed one by one 356ifneq ($(filter install,$(MAKECMDGOALS)),) 357 ifneq ($(filter modules_install,$(MAKECMDGOALS)),) 358 mixed-build := 1 359 endif 360endif 361 362ifdef mixed-build 363# =========================================================================== 364# We're called with mixed targets (*config and build targets). 365# Handle them one by one. 366 367PHONY += $(MAKECMDGOALS) __build_one_by_one 368 369$(MAKECMDGOALS): __build_one_by_one 370 @: 371 372__build_one_by_one: 373 $(Q)set -e; \ 374 for i in $(MAKECMDGOALS); do \ 375 $(MAKE) -f $(srctree)/Makefile $$i; \ 376 done 377 378else # !mixed-build 379 380include $(srctree)/scripts/Kbuild.include 381 382# Read KERNELRELEASE from include/config/kernel.release (if it exists) 383KERNELRELEASE = $(call read-file, $(objtree)/include/config/kernel.release) 384KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 385export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION 386 387include $(srctree)/scripts/subarch.include 388 389# Cross compiling and selecting different set of gcc/bin-utils 390# --------------------------------------------------------------------------- 391# 392# When performing cross compilation for other architectures ARCH shall be set 393# to the target architecture. (See arch/* for the possibilities). 394# ARCH can be set during invocation of make: 395# make ARCH=arm64 396# Another way is to have ARCH set in the environment. 397# The default ARCH is the host where make is executed. 398 399# CROSS_COMPILE specify the prefix used for all executables used 400# during compilation. Only gcc and related bin-utils executables 401# are prefixed with $(CROSS_COMPILE). 402# CROSS_COMPILE can be set on the command line 403# make CROSS_COMPILE=aarch64-linux-gnu- 404# Alternatively CROSS_COMPILE can be set in the environment. 405# Default value for CROSS_COMPILE is not to prefix executables 406# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile 407ARCH ?= $(SUBARCH) 408 409# Architecture as present in compile.h 410UTS_MACHINE := $(ARCH) 411SRCARCH := $(ARCH) 412 413# Additional ARCH settings for x86 414ifeq ($(ARCH),i386) 415 SRCARCH := x86 416endif 417ifeq ($(ARCH),x86_64) 418 SRCARCH := x86 419endif 420 421# Additional ARCH settings for sparc 422ifeq ($(ARCH),sparc32) 423 SRCARCH := sparc 424endif 425ifeq ($(ARCH),sparc64) 426 SRCARCH := sparc 427endif 428 429# Additional ARCH settings for parisc 430ifeq ($(ARCH),parisc64) 431 SRCARCH := parisc 432endif 433 434export cross_compiling := 435ifneq ($(SRCARCH),$(SUBARCH)) 436cross_compiling := 1 437endif 438 439KCONFIG_CONFIG ?= .config 440export KCONFIG_CONFIG 441 442# SHELL used by kbuild 443CONFIG_SHELL := sh 444 445HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null) 446HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null) 447HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null) 448 449ifneq ($(LLVM),) 450ifneq ($(filter %/,$(LLVM)),) 451LLVM_PREFIX := $(LLVM) 452else ifneq ($(filter -%,$(LLVM)),) 453LLVM_SUFFIX := $(LLVM) 454else ifneq ($(LLVM),1) 455$(error Invalid value for LLVM, see Documentation/kbuild/llvm.rst) 456endif 457 458HOSTCC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX) 459HOSTCXX = $(LLVM_PREFIX)clang++$(LLVM_SUFFIX) 460else 461HOSTCC = gcc 462HOSTCXX = g++ 463endif 464HOSTRUSTC = rustc 465HOSTPKG_CONFIG = pkg-config 466 467# the KERNELDOC macro needs to be exported, as scripts/Makefile.build 468# has a logic to call it 469KERNELDOC = $(srctree)/tools/docs/kernel-doc 470export KERNELDOC 471 472KBUILD_USERHOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \ 473 -O2 -fomit-frame-pointer -std=gnu11 474KBUILD_USERCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(USERCFLAGS) 475KBUILD_USERLDFLAGS := $(USERLDFLAGS) 476 477# These flags apply to all Rust code in the tree, including the kernel and 478# host programs. 479# 480# `-Aclippy::comparison_chain`: the lint has been demoted since 1.87. 481# `-Aclippy::unwrap_or_default`: the lint is buggy [1] and ignores our 482# MSRV. It can trigger depending on the optimization level. 483# [1] https://github.com/rust-lang/rust-clippy/issues/17379 484export rust_common_flags := --edition=2021 \ 485 -Zbinary_dep_depinfo=y \ 486 -Astable_features \ 487 -Aunused_features \ 488 -Dnon_ascii_idents \ 489 -Dunsafe_op_in_unsafe_fn \ 490 -Wmissing_docs \ 491 -Wrust_2018_idioms \ 492 -Wunreachable_pub \ 493 -Wclippy::all \ 494 -Wclippy::as_ptr_cast_mut \ 495 -Wclippy::as_underscore \ 496 -Wclippy::cast_lossless \ 497 -Aclippy::collapsible_if \ 498 -Aclippy::collapsible_match \ 499 -Aclippy::comparison_chain \ 500 -Wclippy::ignored_unit_patterns \ 501 -Aclippy::incompatible_msrv \ 502 -Wclippy::mut_mut \ 503 -Wclippy::needless_bitwise_bool \ 504 -Aclippy::needless_lifetimes \ 505 -Wclippy::no_mangle_with_rust_abi \ 506 -Wclippy::ptr_as_ptr \ 507 -Wclippy::ptr_cast_constness \ 508 -Wclippy::ref_as_ptr \ 509 -Wclippy::undocumented_unsafe_blocks \ 510 -Aclippy::uninlined_format_args \ 511 -Wclippy::unnecessary_safety_comment \ 512 -Wclippy::unnecessary_safety_doc \ 513 -Aclippy::unwrap_or_default \ 514 -Wrustdoc::missing_crate_level_docs \ 515 -Wrustdoc::unescaped_backticks 516 517KBUILD_HOSTCFLAGS := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) \ 518 $(HOSTCFLAGS) -I $(srctree)/scripts/include 519KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS) \ 520 -I $(srctree)/scripts/include 521KBUILD_HOSTRUSTFLAGS := $(rust_common_flags) -O -Cstrip=debuginfo \ 522 -Zallow-features= 523KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS) 524KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS) 525KBUILD_PROCMACROLDFLAGS := $(or $(PROCMACROLDFLAGS),$(KBUILD_HOSTLDFLAGS)) 526 527# Make variables (CC, etc...) 528CPP = $(CC) -E 529ifneq ($(LLVM),) 530CC = $(LLVM_PREFIX)clang$(LLVM_SUFFIX) 531LD = $(LLVM_PREFIX)ld.lld$(LLVM_SUFFIX) 532AR = $(LLVM_PREFIX)llvm-ar$(LLVM_SUFFIX) 533LLVM_LINK = $(LLVM_PREFIX)llvm-link$(LLVM_SUFFIX) 534NM = $(LLVM_PREFIX)llvm-nm$(LLVM_SUFFIX) 535OBJCOPY = $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX) 536OBJDUMP = $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX) 537READELF = $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX) 538STRIP = $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX) 539ifeq ($(filter -fuse-ld=% --ld-path=%,$(KBUILD_HOSTLDFLAGS)),) 540KBUILD_HOSTLDFLAGS += -fuse-ld=lld 541endif 542else 543CC = $(CROSS_COMPILE)gcc 544LD = $(CROSS_COMPILE)ld 545AR = $(CROSS_COMPILE)ar 546NM = $(CROSS_COMPILE)nm 547OBJCOPY = $(CROSS_COMPILE)objcopy 548OBJDUMP = $(CROSS_COMPILE)objdump 549READELF = $(CROSS_COMPILE)readelf 550STRIP = $(CROSS_COMPILE)strip 551endif 552RUSTC = rustc 553RUSTDOC = rustdoc 554RUSTFMT = rustfmt 555CLIPPY_DRIVER = clippy-driver 556BINDGEN = bindgen 557PAHOLE = pahole 558RESOLVE_BTFIDS = $(objtree)/tools/bpf/resolve_btfids/resolve_btfids 559LEX = flex 560YACC = bison 561AWK = awk 562INSTALLKERNEL := installkernel 563PERL = perl 564PYTHON3 = python3 565CHECK = sparse 566BASH = bash 567KGZIP = gzip 568KBZIP2 = bzip2 569KLZOP = lzop 570LZMA = lzma 571LZ4 = lz4 572XZ = xz 573ZSTD = zstd 574# The kernel image is compressed with pigz, on the job slots make has free, 575# if it is installed. Everything else uses KGZIP. 576KPGZIP := $(if $(shell command -v pigz 2>/dev/null),$(PYTHON3) $(abs_srctree)/scripts/jobserver-exec pigz -p %PARALLELISM%,$(KGZIP)) 577TAR = tar 578 579CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 580 -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF) 581NOSTDINC_FLAGS := 582CFLAGS_MODULE = 583RUSTFLAGS_MODULE = 584AFLAGS_MODULE = 585LDFLAGS_MODULE = 586CFLAGS_KERNEL = 587RUSTFLAGS_KERNEL = 588AFLAGS_KERNEL = 589LDFLAGS_vmlinux = 590 591# Use USERINCLUDE when you must reference the UAPI directories only. 592USERINCLUDE := \ 593 -I$(srctree)/arch/$(SRCARCH)/include/uapi \ 594 -I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \ 595 -I$(srctree)/include/uapi \ 596 -I$(objtree)/include/generated/uapi \ 597 -include $(srctree)/include/linux/compiler-version.h \ 598 -include $(srctree)/include/linux/kconfig.h 599 600# Use LINUXINCLUDE when you must reference the include/ directory. 601# Needed to be compatible with the O= option 602LINUXINCLUDE := \ 603 -I$(srctree)/arch/$(SRCARCH)/include \ 604 -I$(objtree)/arch/$(SRCARCH)/include/generated \ 605 -I$(srctree)/include \ 606 -I$(objtree)/include \ 607 $(USERINCLUDE) 608 609KBUILD_AFLAGS := -D__ASSEMBLY__ -fno-PIE 610 611KBUILD_CFLAGS := 612KBUILD_CFLAGS += -fshort-wchar 613KBUILD_CFLAGS += -funsigned-char 614KBUILD_CFLAGS += -fno-common 615KBUILD_CFLAGS += -fno-PIE 616KBUILD_CFLAGS += -fno-strict-aliasing 617 618KBUILD_CPPFLAGS := -D__KERNEL__ 619KBUILD_RUSTFLAGS := $(rust_common_flags) \ 620 -Cpanic=abort -Cembed-bitcode=n -Clto=n \ 621 -Cforce-unwind-tables=n -Ccodegen-units=1 \ 622 -Csymbol-mangling-version=v0 \ 623 -Crelocation-model=static \ 624 -Zfunction-sections=n \ 625 -Wclippy::float_arithmetic 626KBUILD_RUSTFLAGS_OPTION_CHKS := 627 628KBUILD_AFLAGS_KERNEL := 629KBUILD_CFLAGS_KERNEL := 630KBUILD_RUSTFLAGS_KERNEL := 631KBUILD_AFLAGS_MODULE := -DMODULE 632KBUILD_CFLAGS_MODULE := -DMODULE 633KBUILD_RUSTFLAGS_MODULE := --cfg MODULE 634KBUILD_LDFLAGS_MODULE := 635KBUILD_LDFLAGS := 636CLANG_FLAGS := 637 638ifeq ($(KBUILD_CLIPPY),1) 639 RUSTC_OR_CLIPPY_QUIET := CLIPPY 640 RUSTC_OR_CLIPPY = $(CLIPPY_DRIVER) 641else 642 RUSTC_OR_CLIPPY_QUIET := RUSTC 643 RUSTC_OR_CLIPPY = $(RUSTC) 644endif 645 646# Allows the usage of unstable features in stable compilers. 647export RUSTC_BOOTSTRAP := 1 648 649# Allows finding `.clippy.toml` in out-of-srctree builds. 650export CLIPPY_CONF_DIR := $(srctree) 651 652export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG 653export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN LLVM_LINK 654export HOSTRUSTC KBUILD_HOSTRUSTFLAGS 655export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL 656export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX 657export KGZIP KPGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD TAR 658export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS KBUILD_PROCMACROLDFLAGS LDFLAGS_MODULE 659export KBUILD_USERCFLAGS KBUILD_USERLDFLAGS 660 661export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS 662export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE 663export KBUILD_RUSTFLAGS RUSTFLAGS_KERNEL RUSTFLAGS_MODULE KBUILD_RUSTFLAGS_OPTION_CHKS 664export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE 665export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_RUSTFLAGS_MODULE KBUILD_LDFLAGS_MODULE 666export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL KBUILD_RUSTFLAGS_KERNEL 667 668# Files to ignore in find ... statements 669 670export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 671 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 672 -prune -o 673 674# =========================================================================== 675# Rules shared between *config targets and build targets 676 677# Basic helpers built in scripts/basic/ 678PHONY += scripts_basic 679scripts_basic: KBUILD_HOSTCFLAGS := $(KBUILD_HOSTCFLAGS) 680scripts_basic: KBUILD_HOSTLDFLAGS := $(KBUILD_HOSTLDFLAGS) 681scripts_basic: 682 $(Q)$(MAKE) $(build)=scripts/basic 683 684PHONY += outputmakefile 685ifdef building_out_of_srctree 686# Before starting out-of-tree build, make sure the source tree is clean. 687# outputmakefile generates a Makefile in the output directory, if using a 688# separate output directory. This allows convenient use of make in the 689# output directory. 690# At the same time as the output Makefile is generated, generate .gitignore to 691# ignore the whole output directory 692 693ifdef KBUILD_EXTMOD 694print_env_for_makefile = \ 695 echo "export KBUILD_OUTPUT = $(objtree)"; \ 696 echo "export KBUILD_EXTMOD = $(realpath $(srcroot))" ; \ 697 echo "export KBUILD_EXTMOD_OUTPUT = $(CURDIR)" 698else 699print_env_for_makefile = \ 700 echo "export KBUILD_OUTPUT = $(CURDIR)" 701endif 702 703filechk_makefile = { \ 704 echo "\# Automatically generated by $(abs_srctree)/Makefile: don't edit"; \ 705 $(print_env_for_makefile); \ 706 echo "include $(abs_srctree)/Makefile"; \ 707 } 708 709PHONY += $(CURDIR)/Makefile 710$(CURDIR)/Makefile: FORCE 711 $(call filechk,makefile) 712 713outputmakefile: $(CURDIR)/Makefile 714ifeq ($(KBUILD_EXTMOD),) 715 @if [ -f $(srctree)/.config -o \ 716 -d $(srctree)/include/config -o \ 717 -d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \ 718 echo >&2 "***"; \ 719 echo >&2 "*** The source tree is not clean, please run 'make$(if $(findstring command line, $(origin ARCH)), ARCH=$(ARCH)) mrproper'"; \ 720 echo >&2 "*** in $(abs_srctree)";\ 721 echo >&2 "***"; \ 722 false; \ 723 fi 724else 725 @if [ -f $(srcroot)/modules.order ]; then \ 726 echo >&2 "***"; \ 727 echo >&2 "*** The external module source tree is not clean."; \ 728 echo >&2 "*** Please run 'make -C $(abs_srctree) M=$(realpath $(srcroot)) clean'"; \ 729 echo >&2 "***"; \ 730 false; \ 731 fi 732endif 733 $(Q)ln -fsn $(srcroot) source 734 $(Q)test -e .gitignore || \ 735 { echo "# this is build directory, ignore it"; echo "*"; } > .gitignore 736endif 737 738# The expansion should be delayed until arch/$(SRCARCH)/Makefile is included. 739# Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile. 740# CC_VERSION_TEXT, RUSTC_VERSION_TEXT and PAHOLE_VERSION are referenced from 741# Kconfig (so they need export), and from include/config/auto.conf.cmd to 742# detect the version changes between builds. 743CC_VERSION_TEXT = $(subst $(pound),,$(shell LC_ALL=C $(CC) --version 2>/dev/null | head -n 1)) 744RUSTC_VERSION_TEXT = $(subst $(pound),,$(shell $(RUSTC) --version 2>/dev/null)) 745PAHOLE_VERSION = $(shell $(srctree)/scripts/pahole-version.sh $(PAHOLE)) 746 747ifneq ($(findstring clang,$(CC_VERSION_TEXT)),) 748include $(srctree)/scripts/Makefile.clang 749endif 750 751# Include this also for config targets because some architectures need 752# cc-cross-prefix to determine CROSS_COMPILE. 753ifdef need-compiler 754include $(srctree)/scripts/Makefile.compiler 755endif 756 757ifdef config-build 758# =========================================================================== 759# *config targets only - make sure prerequisites are updated, and descend 760# in scripts/kconfig to make the *config target 761 762# Read arch-specific Makefile to set KBUILD_DEFCONFIG as needed. 763# KBUILD_DEFCONFIG may point out an alternative default configuration 764# used for 'make defconfig' 765include $(srctree)/arch/$(SRCARCH)/Makefile 766export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT RUSTC_VERSION_TEXT PAHOLE_VERSION 767 768config: outputmakefile scripts_basic FORCE 769 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 770 771%config: outputmakefile scripts_basic FORCE 772 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 773 774else #!config-build 775# =========================================================================== 776# Build targets only - this includes vmlinux, arch-specific targets, clean 777# targets and others. In general all targets except *config targets. 778 779# If building an external module we do not care about the all: rule 780# but instead __all depend on modules 781PHONY += all 782ifeq ($(KBUILD_EXTMOD),) 783__all: all 784else 785__all: modules 786endif 787 788targets := 789 790# Decide whether to build built-in, modular, or both. 791# Normally, just do built-in. 792 793KBUILD_MODULES := 794KBUILD_BUILTIN := y 795 796# If we have only "make modules", don't compile built-in objects. 797ifeq ($(MAKECMDGOALS),modules) 798 KBUILD_BUILTIN := 799endif 800 801# If we have "make <whatever> modules", compile modules 802# in addition to whatever we do anyway. 803# Just "make" or "make all" shall build modules as well 804 805ifneq ($(filter all modules nsdeps compile_commands.json clang-% sbom,$(MAKECMDGOALS)),) 806 KBUILD_MODULES := y 807endif 808 809ifeq ($(MAKECMDGOALS),) 810 KBUILD_MODULES := y 811endif 812 813export KBUILD_MODULES KBUILD_BUILTIN 814 815ifdef need-config 816include $(objtree)/include/config/auto.conf 817endif 818 819CC_FLAGS_DIALECT := -std=gnu11 820# Allow including a tagged struct or union anonymously in another struct/union. 821CC_FLAGS_DIALECT += $(CONFIG_CC_MS_EXTENSIONS) 822# Clang enables warnings about GNU and Microsoft extensions by default, disable 823# them because this is expected with the above options. 824ifdef CONFIG_CC_IS_CLANG 825CC_FLAGS_DIALECT += -Wno-gnu 826CC_FLAGS_DIALECT += -Wno-microsoft-anon-tag 827endif 828export CC_FLAGS_DIALECT 829KBUILD_CFLAGS += $(CC_FLAGS_DIALECT) 830 831ifeq ($(KBUILD_EXTMOD),) 832# Objects we will link into vmlinux / subdirs we need to visit 833core-y := 834drivers-y := 835libs-y := lib/ 836endif # KBUILD_EXTMOD 837 838# The all: target is the default when no target is given on the 839# command line. 840# This allow a user to issue only 'make' to build a kernel including modules 841# Defaults to vmlinux, but the arch makefile usually adds further targets 842all: vmlinux 843 844# The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later. 845ifdef CONFIG_FUNCTION_TRACER 846 CC_FLAGS_FTRACE := -pg 847endif 848 849ifdef CONFIG_TRACEPOINTS 850# To check for unused tracepoints (tracepoints that are defined but never 851# called), run with: 852# 853# make UT=1 854# 855# Each unused tracepoints can take up to 5KB of memory in the running kernel. 856# It is best to remove any that are not used. 857# 858# This command line option will be removed when all current unused 859# tracepoints are removed. 860 861ifeq ("$(origin UT)", "command line") 862 WARN_ON_UNUSED_TRACEPOINTS := $(UT) 863endif 864endif # CONFIG_TRACEPOINTS 865 866export WARN_ON_UNUSED_TRACEPOINTS 867 868# Per-version Rust flags. These are like `rust_common_flags`, but may 869# depend on the Rust compiler version (e.g. using `rustc-min-version`). 870# 871# `-Aclippy::precedence`: the lint was extended in Rust 1.85.0 to 872# include bitmasking and shift operations. However, because it generated 873# many hits, in Rust 1.86.0 it was split into a new `precedence_bits` 874# lint which is not enabled by default. 875rust_common_flags_per_version := \ 876 $(if $(call rustc-min-version,108600),,-Aclippy::precedence) 877 878rust_common_flags += $(rust_common_flags_per_version) 879KBUILD_HOSTRUSTFLAGS += $(rust_common_flags_per_version) $(HOSTRUSTFLAGS) 880KBUILD_RUSTFLAGS += $(rust_common_flags_per_version) 881 882include $(srctree)/arch/$(SRCARCH)/Makefile 883 884ifdef need-config 885ifdef may-sync-config 886# Read in dependencies to all Kconfig* files, make sure to run syncconfig if 887# changes are detected. This should be included after arch/$(SRCARCH)/Makefile 888# because some architectures define CROSS_COMPILE there. 889include include/config/auto.conf.cmd 890 891$(KCONFIG_CONFIG): 892 @echo >&2 '***' 893 @echo >&2 '*** Configuration file "$@" not found!' 894 @echo >&2 '***' 895 @echo >&2 '*** Please run some configurator (e.g. "make oldconfig" or' 896 @echo >&2 '*** "make menuconfig" or "make xconfig").' 897 @echo >&2 '***' 898 @/bin/false 899 900# The actual configuration files used during the build are stored in 901# include/generated/ and include/config/. Update them if .config is newer than 902# include/config/auto.conf (which mirrors .config). 903# 904# This exploits the 'multi-target pattern rule' trick. 905# The syncconfig should be executed only once to make all the targets. 906# (Note: use the grouped target '&:' when we bump to GNU Make 4.3) 907# 908# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig, 909# so you cannot notice that Kconfig is waiting for the user input. 910%/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h %/generated/rustc_cfg: $(KCONFIG_CONFIG) 911 $(Q)$(kecho) " SYNC $@" 912 $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig 913else # !may-sync-config 914# External modules and some install targets need include/generated/autoconf.h 915# and include/config/auto.conf but do not care if they are up-to-date. 916# Use auto.conf to show the error message 917 918checked-configs := $(addprefix $(objtree)/, include/generated/autoconf.h include/generated/rustc_cfg include/config/auto.conf) 919missing-configs := $(filter-out $(wildcard $(checked-configs)), $(checked-configs)) 920 921ifdef missing-configs 922PHONY += $(objtree)/include/config/auto.conf 923 924$(objtree)/include/config/auto.conf: 925 @echo >&2 '***' 926 @echo >&2 '*** ERROR: Kernel configuration is invalid. The following files are missing:' 927 @printf >&2 '*** - %s\n' $(missing-configs) 928 @echo >&2 '*** Run "make oldconfig && make prepare" on kernel source to fix it.' 929 @echo >&2 '***' 930 @/bin/false 931endif 932 933endif # may-sync-config 934endif # need-config 935 936KBUILD_CFLAGS += -fno-delete-null-pointer-checks 937 938ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE 939KBUILD_CFLAGS += -O2 940KBUILD_RUSTFLAGS += -Copt-level=2 941else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 942KBUILD_CFLAGS += -Os 943KBUILD_RUSTFLAGS += -Copt-level=s 944endif 945 946# Always set `debug-assertions` and `overflow-checks` because their default 947# depends on `opt-level` and `debug-assertions`, respectively. 948KBUILD_RUSTFLAGS += -Cdebug-assertions=$(if $(CONFIG_RUST_DEBUG_ASSERTIONS),y,n) 949KBUILD_RUSTFLAGS += -Coverflow-checks=$(if $(CONFIG_RUST_OVERFLOW_CHECKS),y,n) 950 951# Tell gcc to never replace conditional load with a non-conditional one 952ifdef CONFIG_CC_IS_GCC 953# gcc-10 renamed --param=allow-store-data-races=0 to 954# -fno-allow-store-data-races. 955KBUILD_CFLAGS += $(CONFIG_CC_OPT_ALLOW_STORE_DATA_RACES_PARAM) 956KBUILD_CFLAGS += $(CONFIG_CC_OPT_NO_ALLOW_STORE_DATA_RACES) 957endif 958 959ifdef CONFIG_READABLE_ASM 960# Disable optimizations that make assembler listings hard to read. 961# reorder blocks reorders the control in the function 962# ipa clone creates specialized cloned functions 963# partial inlining inlines only parts of functions 964KBUILD_CFLAGS += -fno-reorder-blocks -fno-ipa-cp-clone -fno-partial-inlining 965endif 966 967stackp-flags-y := -fno-stack-protector 968stackp-flags-$(CONFIG_STACKPROTECTOR) := -fstack-protector 969stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong 970 971KBUILD_CFLAGS += $(stackp-flags-y) 972 973ifdef CONFIG_FRAME_POINTER 974KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls 975KBUILD_RUSTFLAGS += -Cforce-frame-pointers=y 976# Work around rustc bug on compilers without 977# https://github.com/rust-lang/rust/pull/156980. 978KBUILD_RUSTFLAGS += $(if $(call rustc-min-version,109800),,-Zllvm_module_flag=frame-pointer:u32:2:max) 979else 980# Some targets (ARM with Thumb2, for example), can't be built with frame 981# pointers. For those, we don't have FUNCTION_TRACER automatically 982# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is 983# incompatible with -fomit-frame-pointer with current GCC, so we don't use 984# -fomit-frame-pointer with FUNCTION_TRACER. 985# In the Rust target specification, "frame-pointer" is set explicitly 986# to "may-omit". 987ifndef CONFIG_FUNCTION_TRACER 988KBUILD_CFLAGS += -fomit-frame-pointer 989endif 990endif 991 992# Initialize all stack variables with a 0xAA pattern. 993ifdef CONFIG_INIT_STACK_ALL_PATTERN 994KBUILD_CFLAGS += -ftrivial-auto-var-init=pattern 995endif 996 997# Initialize all stack variables with a zero value. 998ifdef CONFIG_INIT_STACK_ALL_ZERO 999KBUILD_CFLAGS += -ftrivial-auto-var-init=zero 1000ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER 1001# https://github.com/llvm/llvm-project/issues/44842 1002CC_AUTO_VAR_INIT_ZERO_ENABLER := -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang 1003export CC_AUTO_VAR_INIT_ZERO_ENABLER 1004KBUILD_CFLAGS += $(CC_AUTO_VAR_INIT_ZERO_ENABLER) 1005endif 1006endif 1007 1008ifdef CONFIG_KMALLOC_PARTITION_TYPED 1009# KMALLOC_PARTITION_CACHES_NR + 1 1010KBUILD_CFLAGS += -falloc-token-max=16 1011endif 1012 1013ifdef CONFIG_CC_IS_CLANG 1014ifdef CONFIG_CC_HAS_COUNTED_BY_PTR 1015KBUILD_CFLAGS += -fexperimental-late-parse-attributes 1016endif 1017endif 1018 1019# Explicitly clear padding bits during variable initialization 1020KBUILD_CFLAGS += $(CONFIG_CC_OPT_ZERO_INIT_PADDING_BITS) 1021 1022# While VLAs have been removed, GCC produces unreachable stack probes 1023# for the randomize_kstack_offset feature. Disable it for all compilers. 1024# Probed here rather than in Kconfig as clang only accepts it for some 1025# sub-targets, so the architecture's flags matter. 1026KBUILD_CFLAGS += $(call cc-option, -fno-stack-clash-protection) 1027 1028# Get details on warnings generated due to GCC value tracking. 1029KBUILD_CFLAGS += $(CONFIG_CC_OPT_DIAGNOSTICS_SHOW_CONTEXT) 1030 1031# Show inlining notes for __attribute__((warning/error)) call chains. 1032# GCC supports this unconditionally while Clang 23+ provides a flag. 1033KBUILD_CFLAGS += $(CONFIG_CC_OPT_DIAGNOSTICS_SHOW_INLINING_CHAIN) 1034 1035# Clear used registers at func exit (to reduce data lifetime and ROP gadgets). 1036ifdef CONFIG_ZERO_CALL_USED_REGS 1037KBUILD_CFLAGS += -fzero-call-used-regs=used-gpr 1038endif 1039 1040ifdef CONFIG_FUNCTION_TRACER 1041ifdef CONFIG_FTRACE_MCOUNT_USE_CC 1042 CC_FLAGS_FTRACE += -mrecord-mcount 1043 ifdef CONFIG_HAVE_NOP_MCOUNT 1044 ifdef CONFIG_CC_HAS_MNOP_MCOUNT 1045 CC_FLAGS_FTRACE += -mnop-mcount 1046 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 1047 endif 1048 endif 1049endif 1050ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL 1051 ifdef CONFIG_HAVE_OBJTOOL_NOP_MCOUNT 1052 CC_FLAGS_USING += -DCC_USING_NOP_MCOUNT 1053 endif 1054endif 1055ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT 1056 ifdef CONFIG_HAVE_C_RECORDMCOUNT 1057 BUILD_C_RECORDMCOUNT := y 1058 export BUILD_C_RECORDMCOUNT 1059 endif 1060endif 1061ifdef CONFIG_HAVE_FENTRY 1062 ifdef CONFIG_CC_HAS_MFENTRY 1063 CC_FLAGS_FTRACE += -mfentry 1064 CC_FLAGS_USING += -DCC_USING_FENTRY 1065 endif 1066endif 1067export CC_FLAGS_FTRACE 1068KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING) 1069KBUILD_AFLAGS += $(CC_FLAGS_USING) 1070endif 1071 1072# We trigger additional mismatches with less inlining 1073ifdef CONFIG_DEBUG_SECTION_MISMATCH 1074KBUILD_CFLAGS += -fno-inline-functions-called-once 1075endif 1076 1077# `rustc`'s `-Zfunction-sections` applies to data too (as of 1.59.0). 1078ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION 1079KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections 1080KBUILD_RUSTFLAGS_KERNEL += -Zfunction-sections=y 1081LDFLAGS_vmlinux += --gc-sections 1082endif 1083 1084ifdef CONFIG_SHADOW_CALL_STACK 1085ifndef CONFIG_DYNAMIC_SCS 1086CC_FLAGS_SCS := -fsanitize=shadow-call-stack 1087KBUILD_CFLAGS += $(CC_FLAGS_SCS) 1088KBUILD_RUSTFLAGS += -Zsanitizer=shadow-call-stack 1089endif 1090export CC_FLAGS_SCS 1091endif 1092 1093ifdef CONFIG_RUST_INLINE_HELPERS 1094# `rustc` normally emits traps for unreachable paths during code generation. 1095# With inline helpers, Clang performs code generation from the linked bitcode 1096# instead, so request the same behavior explicitly. Otherwise `objtool` may 1097# follow an impossible Rust path into the next function. 1098CC_FLAGS_RUST_INLINE_HELPERS := -mllvm -trap-unreachable \ 1099 -mllvm -no-trap-after-noreturn 1100export CC_FLAGS_RUST_INLINE_HELPERS 1101endif 1102 1103ifdef CONFIG_LTO_CLANG 1104ifdef CONFIG_LTO_CLANG_FULL 1105CC_FLAGS_LTO := -flto 1106else 1107CC_FLAGS_LTO := -flto=thin -fsplit-lto-unit 1108 1109# These LLVM options were initially added with only in-process ThinLTO 1110# support, so avoid distributed ThinLTO support for now. 1111ifdef CONFIG_LTO_CLANG_THIN 1112KBUILD_LDFLAGS += $(call ld-option,--lto-whole-program-visibility -mllvm -always-rename-promoted-locals=false) 1113endif 1114endif 1115CC_FLAGS_LTO += -fvisibility=hidden 1116 1117# Limit inlining across translation units to reduce binary size 1118KBUILD_LDFLAGS += -mllvm -import-instr-limit=5 1119endif 1120 1121ifdef CONFIG_LTO 1122KBUILD_CFLAGS += -fno-lto $(CC_FLAGS_LTO) 1123KBUILD_AFLAGS += -fno-lto 1124export CC_FLAGS_LTO 1125endif 1126 1127ifdef CONFIG_CFI 1128CC_FLAGS_CFI := -fsanitize=kcfi 1129ifdef CONFIG_CFI_ICALL_NORMALIZE_INTEGERS 1130 CC_FLAGS_CFI += -fsanitize-cfi-icall-experimental-normalize-integers 1131endif 1132ifdef CONFIG_FINEIBT_BHI 1133 CC_FLAGS_CFI += -fsanitize-kcfi-arity 1134endif 1135ifdef CONFIG_RUST 1136 # Always pass -Zsanitizer-cfi-normalize-integers as CONFIG_RUST selects 1137 # CONFIG_CFI_ICALL_NORMALIZE_INTEGERS. 1138 # Disable function merging as LLVM incorrectly merges functions with different KCFI types. 1139 RUSTC_FLAGS_CFI := -Zsanitizer=kcfi -Zsanitizer-cfi-normalize-integers -Zmerge-functions=disabled 1140 KBUILD_RUSTFLAGS += $(RUSTC_FLAGS_CFI) 1141 export RUSTC_FLAGS_CFI 1142endif 1143KBUILD_CFLAGS += $(CC_FLAGS_CFI) 1144export CC_FLAGS_CFI 1145endif 1146 1147# Architectures can define flags to add/remove for floating-point support 1148CC_FLAGS_FPU += -D_LINUX_FPU_COMPILATION_UNIT 1149export CC_FLAGS_FPU 1150export CC_FLAGS_NO_FPU 1151 1152ifneq ($(CONFIG_FUNCTION_ALIGNMENT),0) 1153# Set the minimal function alignment. Use the newer GCC option 1154# -fmin-function-alignment if it is available, or fall back to -falign-functions. 1155# See also CONFIG_CC_HAS_SANE_FUNCTION_ALIGNMENT. 1156ifdef CONFIG_CC_HAS_MIN_FUNCTION_ALIGNMENT 1157KBUILD_CFLAGS += -fmin-function-alignment=$(CONFIG_FUNCTION_ALIGNMENT) 1158else 1159KBUILD_CFLAGS += -falign-functions=$(CONFIG_FUNCTION_ALIGNMENT) 1160endif 1161endif 1162 1163# arch Makefile may override CC so keep this after arch Makefile is included 1164NOSTDINC_FLAGS += -nostdinc 1165 1166# To gain proper coverage for CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE, 1167# the kernel uses only C99 flexible arrays for dynamically sized trailing 1168# arrays. Enforce this for everything that may examine structure sizes and 1169# perform bounds checking. 1170KBUILD_CFLAGS += $(CONFIG_CC_OPT_STRICT_FLEX_ARRAYS) 1171 1172# disable invalid "can't wrap" optimizations for signed / pointers 1173KBUILD_CFLAGS += -fno-strict-overflow 1174 1175# Make sure -fstack-check isn't enabled (like gentoo apparently did) 1176KBUILD_CFLAGS += -fno-stack-check 1177 1178# conserve stack if available 1179ifdef CONFIG_CC_IS_GCC 1180KBUILD_CFLAGS += -fconserve-stack 1181endif 1182 1183# Ensure compilers do not transform certain loops into calls to wcslen() 1184KBUILD_CFLAGS += -fno-builtin-wcslen 1185 1186# change __FILE__ to the relative path to the source directory 1187ifdef building_out_of_srctree 1188CFLAGS_PREFIX_MAP := -fmacro-prefix-map=$(srcroot)/= 1189KBUILD_CPPFLAGS += $(CFLAGS_PREFIX_MAP) 1190KBUILD_USERCFLAGS += $(CFLAGS_PREFIX_MAP) 1191KBUILD_HOSTCFLAGS += $(CFLAGS_PREFIX_MAP) 1192ifeq ($(call rustc-option-yn, --remap-path-scope=macro),y) 1193KBUILD_RUSTFLAGS += --remap-path-prefix=$(srcroot)/= --remap-path-scope=macro 1194endif 1195endif 1196 1197# include additional Makefiles when needed 1198include-y := scripts/Makefile.warn 1199include-$(CONFIG_DEBUG_INFO) += scripts/Makefile.debug 1200include-$(CONFIG_DEBUG_INFO_BTF)+= scripts/Makefile.btf 1201include-$(CONFIG_KASAN) += scripts/Makefile.kasan 1202include-$(CONFIG_KCSAN) += scripts/Makefile.kcsan 1203include-$(CONFIG_KMSAN) += scripts/Makefile.kmsan 1204include-$(CONFIG_UBSAN) += scripts/Makefile.ubsan 1205include-$(CONFIG_KCOV) += scripts/Makefile.kcov 1206include-$(CONFIG_GCOV_KERNEL) += scripts/Makefile.gcov 1207include-$(CONFIG_RANDSTRUCT) += scripts/Makefile.randstruct 1208include-$(CONFIG_KSTACK_ERASE) += scripts/Makefile.kstack_erase 1209include-$(CONFIG_AUTOFDO_CLANG) += scripts/Makefile.autofdo 1210include-$(CONFIG_PROPELLER_CLANG) += scripts/Makefile.propeller 1211include-$(CONFIG_WARN_CONTEXT_ANALYSIS) += scripts/Makefile.context-analysis 1212include-$(CONFIG_GCC_PLUGINS) += scripts/Makefile.gcc-plugins 1213 1214include $(addprefix $(srctree)/, $(include-y)) 1215 1216# scripts/Makefile.gcc-plugins is intentionally included last. 1217# Do not add $(call cc-option,...) below this line. When you build the kernel 1218# from the clean source tree, the GCC plugins do not exist at this point. 1219 1220# Add user supplied CPPFLAGS, AFLAGS, CFLAGS and RUSTFLAGS as the last assignments 1221KBUILD_CPPFLAGS += $(KCPPFLAGS) 1222KBUILD_AFLAGS += $(KAFLAGS) 1223KBUILD_CFLAGS += $(KCFLAGS) 1224KBUILD_RUSTFLAGS += $(KRUSTFLAGS) 1225 1226KBUILD_LDFLAGS_MODULE += --build-id=sha1 1227LDFLAGS_vmlinux += --build-id=sha1 1228 1229# Specific code, such as outlined KASAN checks, may be placed in 1230# COMDAT-deduplicated sections. Use --force-group-allocation to resolve these 1231# groups when linking modules. The option is available from ld.bfd 2.29 and 1232# ld.lld 19.1.0. 1233KBUILD_LDFLAGS_MODULE += $(CONFIG_LD_OPT_FORCE_GROUP_ALLOCATION) 1234 1235KBUILD_LDFLAGS += -z noexecstack 1236ifeq ($(CONFIG_LD_IS_BFD),y) 1237KBUILD_LDFLAGS += $(CONFIG_LD_OPT_NO_WARN_RWX_SEGMENTS) 1238endif 1239 1240ifeq ($(CONFIG_STRIP_ASM_SYMS),y) 1241LDFLAGS_vmlinux += -X 1242endif 1243 1244ifeq ($(CONFIG_RELR),y) 1245# ld.lld before 15 did not support -z pack-relative-relocs. 1246LDFLAGS_vmlinux += $(call ld-option,--pack-dyn-relocs=relr,-z pack-relative-relocs) 1247endif 1248 1249# We never want expected sections to be placed heuristically by the 1250# linker. All sections should be explicitly named in the linker script. 1251ifdef CONFIG_LD_ORPHAN_WARN 1252LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL) 1253endif 1254 1255# --emit-relocs is added by scripts/link-vmlinux.sh, for the final link only. 1256ifneq ($(CONFIG_ARCH_VMLINUX_NEEDS_RELOCS),) 1257LDFLAGS_vmlinux += --discard-none 1258endif 1259 1260# Align the architecture of userspace programs with the kernel 1261USERFLAGS_FROM_KERNEL := --target=% 1262 1263ifdef CONFIG_ARCH_USERFLAGS 1264KBUILD_USERCFLAGS += $(CONFIG_ARCH_USERFLAGS) 1265KBUILD_USERLDFLAGS += $(CONFIG_ARCH_USERFLAGS) 1266else 1267# If not overridden also inherit the bit size 1268USERFLAGS_FROM_KERNEL += -m32 -m64 1269endif 1270 1271KBUILD_USERCFLAGS += $(filter $(USERFLAGS_FROM_KERNEL), $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)) 1272KBUILD_USERLDFLAGS += $(filter $(USERFLAGS_FROM_KERNEL), $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)) 1273 1274# userspace programs are linked via the compiler, use the correct linker 1275ifdef CONFIG_CC_IS_CLANG 1276KBUILD_USERLDFLAGS += --ld-path=$(LD) 1277endif 1278 1279# make the checker run with the right architecture 1280CHECKFLAGS += --arch=$(ARCH) 1281 1282# insure the checker run with the right endianness 1283CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian) 1284 1285# the checker needs the correct machine size 1286CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32) 1287 1288# Validate the checker is available and functional 1289ifneq ($(KBUILD_CHECKSRC), 0) 1290 ifneq ($(shell $(srctree)/scripts/checker-valid.sh $(CHECK) $(CHECKFLAGS)), 1) 1291 $(warning C=$(KBUILD_CHECKSRC) specified, but $(CHECK) is not available or not up to date) 1292 KBUILD_CHECKSRC = 0 1293 endif 1294endif 1295 1296# Default kernel image to build when no specific target is given. 1297# KBUILD_IMAGE may be overruled on the command line or 1298# set in the environment 1299# Also any assignments in arch/$(ARCH)/Makefile take precedence over 1300# this default value 1301export KBUILD_IMAGE ?= vmlinux 1302 1303# 1304# INSTALL_PATH specifies where to place the updated kernel and system map 1305# images. Default is /boot, but you can set it to other values 1306export INSTALL_PATH ?= /boot 1307 1308# 1309# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots. 1310# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as 1311# an argument if needed. Otherwise it defaults to the kernel install path 1312# 1313export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) 1314 1315# 1316# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory 1317# relocations required by build roots. This is not defined in the 1318# makefile but the argument can be passed to make if needed. 1319# 1320 1321MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) 1322export MODLIB 1323 1324PHONY += prepare0 1325 1326ifeq ($(KBUILD_EXTMOD),) 1327 1328build-dir := . 1329clean-dirs := $(sort . Documentation \ 1330 $(patsubst %/,%,$(filter %/, $(core-) \ 1331 $(drivers-) $(libs-)))) 1332 1333export ARCH_CORE := $(core-y) 1334export ARCH_LIB := $(filter %/, $(libs-y)) 1335export ARCH_DRIVERS := $(drivers-y) $(drivers-m) 1336# Externally visible symbols (used by link-vmlinux.sh) 1337 1338KBUILD_VMLINUX_OBJS := built-in.a $(patsubst %/, %/lib.a, $(filter %/, $(libs-y))) 1339KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y)) 1340 1341export KBUILD_VMLINUX_OBJS KBUILD_VMLINUX_LIBS 1342export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds 1343 1344ifdef CONFIG_TRIM_UNUSED_KSYMS 1345# For the kernel to actually contain only the needed exported symbols, 1346# we have to build modules as well to determine what those symbols are. 1347KBUILD_MODULES := y 1348endif 1349 1350PHONY += vmlinux_a 1351vmlinux_a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE 1352 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux_a 1353 1354vmlinux.a: vmlinux_a 1355 @: 1356 1357PHONY += vmlinux_o 1358vmlinux_o: vmlinux.a $(KBUILD_VMLINUX_LIBS) 1359 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux_o 1360 1361vmlinux.o: vmlinux_o 1362 @: 1363 1364PHONY += vmlinux 1365# LDFLAGS_vmlinux in the top Makefile defines linker flags for the top vmlinux, 1366# not for decompressors. LDFLAGS_vmlinux in arch/*/boot/compressed/Makefile is 1367# unrelated; the decompressors just happen to have the same base name, 1368# arch/*/boot/compressed/vmlinux. 1369# Export LDFLAGS_vmlinux only to scripts/Makefile.vmlinux. 1370# 1371# _LDFLAGS_vmlinux is a workaround for the 'private export' bug: 1372# https://savannah.gnu.org/bugs/?61463 1373# For Make > 4.4, the following simple code will work: 1374# vmlinux: private export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux) 1375vmlinux: private _LDFLAGS_vmlinux := $(LDFLAGS_vmlinux) 1376vmlinux: export LDFLAGS_vmlinux = $(_LDFLAGS_vmlinux) 1377vmlinux: vmlinux.o $(KBUILD_LDS) modpost 1378 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux 1379 1380# The actual objects are generated when descending, 1381# make sure no implicit rule kicks in 1382$(sort $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)): . ; 1383 1384ifeq ($(origin KERNELRELEASE),file) 1385filechk_kernel.release = $(srctree)/scripts/setlocalversion $(srctree) 1386else 1387filechk_kernel.release = echo $(KERNELRELEASE) 1388endif 1389 1390# Store (new) KERNELRELEASE string in include/config/kernel.release 1391include/config/kernel.release: FORCE 1392 $(call filechk,kernel.release) 1393 1394# Additional helpers built in scripts/ 1395# Carefully list dependencies so we do not try to build scripts twice 1396# in parallel 1397PHONY += scripts 1398scripts: scripts_basic scripts_dtc 1399 $(Q)$(MAKE) $(build)=$(@) 1400 1401# Things we need to do before we recursively start building the kernel 1402# or the modules are listed in "prepare". 1403# A multi level approach is used. prepareN is processed before prepareN-1. 1404# archprepare is used in arch Makefiles and when processed asm symlink, 1405# version.h and scripts_basic is processed / created. 1406 1407PHONY += prepare archprepare 1408 1409archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \ 1410 asm-generic $(version_h) include/generated/utsrelease.h \ 1411 include/generated/compile.h include/generated/autoconf.h \ 1412 include/generated/rustc_cfg remove-stale-files 1413 1414prepare0: archprepare 1415 $(Q)$(MAKE) $(build)=scripts/mod 1416 $(Q)$(MAKE) $(build)=. prepare 1417 1418# All the preparing.. 1419prepare: prepare0 1420ifdef CONFIG_RUST 1421 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh 1422 $(Q)$(MAKE) $(build)=rust 1423endif 1424 1425PHONY += remove-stale-files 1426remove-stale-files: 1427 $(Q)$(srctree)/scripts/remove-stale-files 1428 1429# Support for using generic headers in asm-generic 1430asm-generic := -f $(srctree)/scripts/Makefile.asm-headers obj 1431 1432PHONY += asm-generic uapi-asm-generic 1433asm-generic: uapi-asm-generic 1434 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \ 1435 generic=include/asm-generic 1436uapi-asm-generic: 1437 $(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \ 1438 generic=include/uapi/asm-generic 1439 1440# Generate some files 1441# --------------------------------------------------------------------------- 1442 1443# KERNELRELEASE can change from a few different places, meaning version.h 1444# needs to be updated, so this check is forced on all builds 1445 1446uts_len := 64 1447define filechk_utsrelease.h 1448 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ 1449 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ 1450 exit 1; \ 1451 fi; \ 1452 echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" 1453endef 1454 1455define filechk_version.h 1456 if [ $(SUBLEVEL) -gt 255 ]; then \ 1457 echo \#define LINUX_VERSION_CODE $(shell \ 1458 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \ 1459 else \ 1460 echo \#define LINUX_VERSION_CODE $(shell \ 1461 expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ 1462 fi; \ 1463 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + \ 1464 ((c) > 255 ? 255 : (c)))'; \ 1465 echo \#define LINUX_VERSION_MAJOR $(VERSION); \ 1466 echo \#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL); \ 1467 echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL) 1468endef 1469 1470$(version_h): private PATCHLEVEL := $(or $(PATCHLEVEL), 0) 1471$(version_h): private SUBLEVEL := $(or $(SUBLEVEL), 0) 1472$(version_h): FORCE 1473 $(call filechk,version.h) 1474 1475include/generated/utsrelease.h: include/config/kernel.release FORCE 1476 $(call filechk,utsrelease.h) 1477 1478filechk_compile.h = $(srctree)/scripts/mkcompile_h \ 1479 "$(UTS_MACHINE)" "$(CONFIG_CC_VERSION_TEXT)" "$(LD)" 1480 1481include/generated/compile.h: FORCE 1482 $(call filechk,compile.h) 1483 1484PHONY += headerdep 1485headerdep: 1486 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ 1487 $(srctree)/scripts/headerdep.pl -I$(srctree)/include 1488 1489# --------------------------------------------------------------------------- 1490# Kernel headers 1491 1492#Default location for installed headers 1493export INSTALL_HDR_PATH = $(objtree)/usr 1494 1495quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include 1496 cmd_headers_install = \ 1497 mkdir -p $(INSTALL_HDR_PATH); \ 1498 rsync -mrl --include='*/' --include='*\.h' --exclude='*' \ 1499 usr/include $(INSTALL_HDR_PATH) 1500 1501PHONY += headers_install 1502headers_install: headers 1503 $(call cmd,headers_install) 1504 1505PHONY += archheaders archscripts 1506 1507hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj 1508 1509PHONY += headers 1510headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders 1511ifdef HEADER_ARCH 1512 $(Q)$(MAKE) -f $(srctree)/Makefile HEADER_ARCH= SRCARCH=$(HEADER_ARCH) headers 1513else 1514 $(Q)$(MAKE) $(hdr-inst)=include/uapi 1515 $(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi 1516endif 1517 1518ifdef CONFIG_HEADERS_INSTALL 1519prepare: headers 1520endif 1521 1522PHONY += scripts_gen_init_cpio 1523scripts_gen_init_cpio: scripts_basic 1524 $(Q)$(MAKE) $(build)=scripts scripts/gen_init_cpio 1525 1526PHONY += scripts_unifdef 1527scripts_unifdef: scripts_basic 1528 $(Q)$(MAKE) $(build)=scripts scripts/unifdef 1529 1530PHONY += scripts_gen_packed_field_checks 1531scripts_gen_packed_field_checks: scripts_basic 1532 $(Q)$(MAKE) $(build)=scripts scripts/gen_packed_field_checks 1533 1534# --------------------------------------------------------------------------- 1535# Header check 1536 1537# Check the headers in HEADER_CHECK=(headers|dirs) 1538PHONY += headercheck 1539 1540ifneq ($(HEADER_CHECK),) 1541 1542header-check-dirs := $(filter-out %.h,$(HEADER_CHECK)) 1543header-check-files := $(filter %.h,$(HEADER_CHECK)) $(if $(header-check-dirs),$(shell cd $(srctree) && find $(header-check-dirs) -name '*.h' 2>/dev/null)) 1544header-check-targets := $(patsubst %.h,%.header-check,$(sort $(header-check-files))) 1545 1546headercheck: 1547 $(if $(header-check-targets),,$(error $@ found no headers in HEADER_CHECK="$(HEADER_CHECK)")) 1548 $(Q)$(MAKE) $(header-check-targets) 1549else 1550headercheck: 1551 $(error $@ requires HEADER_CHECK=(headers|dirs)) 1552endif 1553 1554# --------------------------------------------------------------------------- 1555# Install 1556 1557# Many distributions have the custom install script, /sbin/installkernel. 1558# If DKMS is installed, 'make install' will eventually recurse back 1559# to this Makefile to build and install external modules. 1560# Cancel sub_make_done so that options such as M=, V=, etc. are parsed. 1561 1562quiet_cmd_install = INSTALL $(INSTALL_PATH) 1563 cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh 1564 1565# --------------------------------------------------------------------------- 1566# vDSO install 1567 1568PHONY += vdso_install 1569vdso_install: export INSTALL_FILES = $(vdso-install-y) 1570vdso_install: 1571 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst 1572 1573# --------------------------------------------------------------------------- 1574# Tools 1575 1576ifdef CONFIG_OBJTOOL 1577prepare: tools/objtool 1578endif 1579 1580ifdef CONFIG_BPF 1581ifdef CONFIG_DEBUG_INFO_BTF 1582prepare: tools/bpf/resolve_btfids 1583endif 1584endif 1585 1586# tools/bootconfig renders the embedded bootconfig into a cmdline at build time. 1587ifdef CONFIG_CMDLINE_FROM_BOOTCONFIG 1588prepare: tools/bootconfig 1589endif 1590 1591# tools/bootconfig is run on the build host during prepare, so force a host 1592# binary here; its own Makefile keeps $(CC) for standalone and cross builds. 1593# CROSS_COMPILE= is cleared so tools/scripts/Makefile.include does not inject 1594# the target's --target=/--sysroot= flags into the host clang invocation under 1595# LLVM=1 cross builds (which would produce a target binary that fails to exec). 1596tools/bootconfig: export CC := $(HOSTCC) 1597tools/bootconfig: FORCE 1598 $(Q)mkdir -p $(objtree)/tools 1599 $(Q)$(MAKE) O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ \ 1600 bootconfig CROSS_COMPILE= 1601 1602# The tools build system is not a part of Kbuild and tends to introduce 1603# its own unique issues. If you need to integrate a new tool into Kbuild, 1604# please consider locating that tool outside the tools/ tree and using the 1605# standard Kbuild "hostprogs" syntax instead of adding a new tools/* entry 1606# here. See Documentation/kbuild/makefiles.rst for details. 1607 1608PHONY += resolve_btfids_clean 1609 1610resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids 1611 1612# tools/bpf/resolve_btfids directory might not exist 1613# in output directory, skip its clean in that case 1614resolve_btfids_clean: 1615ifneq ($(wildcard $(resolve_btfids_O)),) 1616 $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean 1617endif 1618 1619PHONY += objtool_clean objtool_mrproper 1620 1621objtool_O = $(abspath $(objtree))/tools/objtool 1622 1623objtool_clean objtool_mrproper: 1624ifneq ($(wildcard $(objtool_O)),) 1625 $(Q)$(MAKE) -sC $(abs_srctree)/tools/objtool O=$(objtool_O) srctree=$(abs_srctree) $(patsubst objtool_%,%,$@) 1626endif 1627 1628PHONY += bootconfig_clean 1629 1630bootconfig_O = $(abspath $(objtree))/tools/bootconfig 1631 1632bootconfig_clean: 1633ifneq ($(wildcard $(bootconfig_O)),) 1634 $(Q)$(MAKE) -sC $(srctree)/tools/bootconfig O=$(bootconfig_O) clean 1635endif 1636 1637tools/: FORCE 1638 $(Q)mkdir -p $(objtree)/tools 1639 $(Q)$(MAKE) O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ 1640 1641tools/%: FORCE 1642 $(Q)mkdir -p $(objtree)/tools 1643 $(Q)$(MAKE) O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $* 1644 1645# --------------------------------------------------------------------------- 1646# Kernel selftest 1647 1648PHONY += kselftest 1649kselftest: headers 1650 $(Q)unset sub_make_done; $(MAKE) -C $(srctree)/tools/testing/selftests run_tests 1651 1652kselftest-%: headers FORCE 1653 $(Q)unset sub_make_done; $(MAKE) -C $(srctree)/tools/testing/selftests $* 1654 1655PHONY += kselftest-merge 1656kselftest-merge: 1657 $(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!)) 1658 $(Q)find $(srctree)/tools/testing/selftests -name config -o -name config.$(UTS_MACHINE) | \ 1659 xargs $(srctree)/scripts/kconfig/merge_config.sh -y -m $(objtree)/.config 1660 $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig 1661 1662# --------------------------------------------------------------------------- 1663# Devicetree files 1664 1665ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),) 1666dtstree := arch/$(SRCARCH)/boot/dts 1667endif 1668 1669dtbindingtree := Documentation/devicetree/bindings 1670 1671%.yaml: dtbs_prepare 1672 $(Q)$(MAKE) $(build)=$(dtbindingtree) \ 1673 $(dtbindingtree)/$(patsubst %.yaml,%.example.dtb,$@) dt_binding_check_one 1674 1675ifneq ($(dtstree),) 1676 1677%.dtb: dtbs_prepare 1678 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1679 1680%.dtbo: dtbs_prepare 1681 $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ 1682 1683PHONY += dtbs dtbs_prepare dtbs_install dtbs_check 1684dtbs: dtbs_prepare 1685 $(Q)$(MAKE) $(build)=$(dtstree) need-dtbslist=1 1686 1687# include/config/kernel.release is actually needed when installing DTBs because 1688# INSTALL_DTBS_PATH contains $(KERNELRELEASE). However, we do not want to make 1689# dtbs_install depend on it as dtbs_install may run as root. 1690dtbs_prepare: include/config/kernel.release scripts_dtc 1691 1692ifneq ($(filter dtbs_check %.yaml, $(MAKECMDGOALS)),) 1693export CHECK_DTBS=y 1694endif 1695 1696ifneq ($(CHECK_DTBS),) 1697dtbs_prepare: dt_binding_schemas 1698endif 1699 1700dtbs_check: dtbs 1701 1702dtbs_install: 1703 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.dtbinst obj=$(dtstree) 1704 1705ifdef CONFIG_OF_EARLY_FLATTREE 1706all: dtbs 1707endif 1708 1709ifdef CONFIG_GENERIC_BUILTIN_DTB 1710vmlinux: dtbs 1711endif 1712 1713endif 1714 1715PHONY += scripts_dtc 1716scripts_dtc: scripts_basic 1717 $(Q)$(MAKE) $(build)=scripts/dtc 1718 1719ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),) 1720export CHECK_DTBS=y 1721endif 1722 1723PHONY += dt_binding_check dt_binding_schemas 1724dt_binding_check: dt_binding_schemas scripts_dtc 1725 $(Q)$(MAKE) $(build)=$(dtbindingtree) $@ 1726 1727dt_binding_schemas: 1728 $(Q)$(MAKE) $(build)=$(dtbindingtree) 1729 1730PHONY += dt_compatible_check 1731dt_compatible_check: dt_binding_schemas 1732 $(Q)$(MAKE) $(build)=$(dtbindingtree) $@ 1733 1734PHONY += dt_style_selftest 1735dt_style_selftest: 1736 $(Q)$(srctree)/scripts/dtc/dt-style-selftest/run.sh 1737 1738# --------------------------------------------------------------------------- 1739# Modules 1740 1741ifdef CONFIG_MODULES 1742 1743# By default, build modules as well 1744 1745all: modules 1746 1747# When we're building modules with modversions, we need to consider 1748# the built-in objects during the descend as well, in order to 1749# make sure the checksums are up to date before we record them. 1750ifdef CONFIG_MODVERSIONS 1751 KBUILD_BUILTIN := y 1752endif 1753 1754# Build modules 1755# 1756 1757# *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFO_BTF_MODULES 1758# is an exception. 1759ifdef CONFIG_DEBUG_INFO_BTF_MODULES 1760KBUILD_BUILTIN := y 1761modules: vmlinux 1762endif 1763 1764modules: modules_prepare 1765 1766# Target to prepare building external modules 1767modules_prepare: prepare 1768 $(Q)$(MAKE) $(build)=scripts scripts/module.lds 1769 1770endif # CONFIG_MODULES 1771 1772### 1773# Cleaning is done on three levels. 1774# make clean Delete most generated files 1775# Leave enough to build external modules 1776# make mrproper Delete the current configuration, and all generated files 1777# make distclean Remove editor backup files, patch leftover files and the like 1778 1779# Directories & files removed with 'make clean' 1780CLEAN_FILES += vmlinux.symvers modules-only.symvers \ 1781 modules.builtin modules.builtin.modinfo modules.nsdeps \ 1782 modules.builtin.ranges vmlinux.o.map vmlinux.unstripped \ 1783 vmlinux.BTF.inline \ 1784 vmlinux.thinlto-index builtin.order \ 1785 compile_commands.json rust/test \ 1786 rust-project.json .vmlinux.objs .vmlinux.export.c \ 1787 .builtin-dtbs-list .builtin-dtbs.S sbom-*.spdx.json 1788 1789# Directories & files removed with 'make mrproper' 1790MRPROPER_FILES += include/config include/generated \ 1791 arch/$(SRCARCH)/include/generated .objdiff \ 1792 debian snap tar-install PKGBUILD pacman \ 1793 .config .config.old .version \ 1794 Module.symvers \ 1795 certs/signing_key.pem \ 1796 certs/x509.genkey \ 1797 vmlinux-gdb.py \ 1798 rpmbuild \ 1799 rust/libmacros.so rust/libmacros.dylib \ 1800 rust/libpin_init_internal.so rust/libpin_init_internal.dylib \ 1801 rust/libzerocopy_derive.so rust/libzerocopy_derive.dylib 1802 1803# clean - Delete most, but leave enough to build external modules 1804# 1805clean: private rm-files := $(CLEAN_FILES) 1806 1807PHONY += archclean vmlinuxclean 1808 1809vmlinuxclean: 1810 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean 1811 $(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean) 1812 1813clean: archclean vmlinuxclean resolve_btfids_clean objtool_clean bootconfig_clean 1814 1815# mrproper - Delete all generated files, including .config 1816# 1817mrproper: private rm-files := $(MRPROPER_FILES) 1818mrproper-dirs := $(addprefix _mrproper_,scripts) 1819 1820PHONY += $(mrproper-dirs) mrproper 1821$(mrproper-dirs): 1822 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1823 1824mrproper: clean objtool_mrproper $(mrproper-dirs) 1825 $(call cmd,rmfiles) 1826 @find . $(RCS_FIND_IGNORE) \ 1827 \( -name '*.rmeta' \) \ 1828 -type f -print | xargs rm -f 1829 1830# distclean 1831# 1832PHONY += distclean 1833 1834distclean: mrproper 1835 @find . $(RCS_FIND_IGNORE) \ 1836 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1837 -o -name '*.bak' -o -name '#*#' -o -name '*%' \ 1838 -o -name 'core' -o -name tags -o -name TAGS -o -name 'cscope*' \ 1839 -o -name GPATH -o -name GRTAGS -o -name GSYMS -o -name GTAGS \) \ 1840 -type f -print | xargs rm -f 1841 1842 1843# Packaging of the kernel to various formats 1844# --------------------------------------------------------------------------- 1845 1846modules-cpio-pkg: scripts_gen_init_cpio 1847 1848%src-pkg: FORCE 1849 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1850%pkg: include/config/kernel.release FORCE 1851 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ 1852 1853# Brief documentation of the typical targets used 1854# --------------------------------------------------------------------------- 1855 1856boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) 1857boards := $(sort $(notdir $(boards))) 1858board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) 1859board-dirs := $(sort $(notdir $(board-dirs:/=))) 1860 1861PHONY += help 1862help: 1863 @echo 'Cleaning targets:' 1864 @echo ' clean - Remove most generated files but keep the config and' 1865 @echo ' enough build support to build external modules' 1866 @echo ' mrproper - Remove all generated files + config + various backup files' 1867 @echo ' distclean - mrproper + remove editor backup and patch files' 1868 @echo '' 1869 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1870 @echo '' 1871 @echo 'Other generic targets:' 1872 @echo ' all - Build all targets marked with [*]' 1873 @echo '* vmlinux - Build the bare kernel' 1874 @echo '* modules - Build all modules' 1875 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' 1876 @echo ' vdso_install - Install unstripped vdso to INSTALL_MOD_PATH (default: /)' 1877 @echo ' dir/ - Build all files in dir and below' 1878 @echo ' dir/file.[ois] - Build specified target only' 1879 @echo ' dir/file.ll - Build the LLVM assembly file' 1880 @echo ' (requires compiler support for LLVM assembly generation)' 1881 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1882 @echo ' (requires a recent binutils and recent build (System.map))' 1883 @echo ' dir/file.ko - Build module including final link' 1884 @echo ' modules_prepare - Set up for building external modules' 1885 @echo ' tags/TAGS - Generate tags file for editors' 1886 @echo ' cscope - Generate cscope index' 1887 @echo ' gtags - Generate GNU GLOBAL index' 1888 @echo ' kernelrelease - Output the release version string (use with make -s)' 1889 @echo ' kernelversion - Output the version stored in Makefile (use with make -s)' 1890 @echo ' image_name - Output the image name (use with make -s)' 1891 @echo ' headers - Build ready-to-install UAPI headers in usr/include' 1892 @echo ' headers_install - Install sanitised kernel UAPI headers to INSTALL_HDR_PATH'; \ 1893 echo ' (default: $(INSTALL_HDR_PATH))'; \ 1894 echo '' 1895 @echo 'Static analysers:' 1896 @echo ' checkstack - Generate a list of stack hogs and consider all functions' 1897 @echo ' with a stack size larger than MINSTACKSIZE (default: 100)' 1898 @echo ' versioncheck - Sanity check on version.h usage' 1899 @echo ' includecheck - Check for duplicate included header files' 1900 @echo ' headerdep - Detect inclusion cycles in headers' 1901 @echo ' headercheck - Check headers in HEADER_CHECK=(headers|dirs) are' 1902 @echo ' self-contained, have header guards, and pass kernel-doc.' 1903 @echo ' coccicheck - Check with Coccinelle' 1904 @echo ' kconfig-sym-check - Check for dangling Kconfig symbol references' 1905 @echo ' clang-analyzer - Check with clang static analyzer' 1906 @echo ' clang-tidy - Check with clang-tidy' 1907 @echo '' 1908 @echo 'Tools:' 1909 @echo ' nsdeps - Generate missing symbol namespace dependencies' 1910 @echo ' sbom - Generate Software Bill of Materials' 1911 @echo '' 1912 @echo 'Kernel selftest:' 1913 @echo ' kselftest - Build and run kernel selftest' 1914 @echo ' Build, install, and boot kernel before' 1915 @echo ' running kselftest on it' 1916 @echo ' Run as root for full coverage' 1917 @echo ' kselftest-all - Build kernel selftest' 1918 @echo ' kselftest-install - Build and install kernel selftest' 1919 @echo ' kselftest-clean - Remove all generated kselftest files' 1920 @echo ' kselftest-merge - Merge all the config dependencies of' 1921 @echo ' kselftest to existing .config.' 1922 @echo '' 1923 @echo 'Rust targets:' 1924 @echo ' rustavailable - Checks whether the Rust toolchain is' 1925 @echo ' available and, if not, explains why.' 1926 @echo ' rustfmt - Reformat all the Rust code in the kernel' 1927 @echo ' rustfmtcheck - Checks if all the Rust code in the kernel' 1928 @echo ' is formatted, printing a diff otherwise.' 1929 @echo ' rustdoc - Generate Rust documentation' 1930 @echo ' (requires kernel .config)' 1931 @echo ' rusttest - Runs the Rust tests' 1932 @echo ' (requires kernel .config; downloads external repos)' 1933 @echo ' rust-analyzer - Generate rust-project.json rust-analyzer support file' 1934 @echo ' (requires kernel .config)' 1935 @echo ' dir/file.[os] - Build specified target only' 1936 @echo ' dir/file.rsi - Build macro expanded source, similar to C preprocessing.' 1937 @echo ' Run with RUSTFMT=n to skip reformatting if needed.' 1938 @echo ' The output is not intended to be compilable.' 1939 @echo ' dir/file.ll - Build the LLVM assembly file' 1940 @echo '' 1941 @$(if $(dtstree), \ 1942 echo 'Devicetree:'; \ 1943 echo '* dtbs - Build device tree blobs for enabled boards'; \ 1944 echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \ 1945 echo ' dt_binding_check - Validate device tree binding documents and examples'; \ 1946 echo ' dt_binding_schemas - Build processed device tree binding schemas'; \ 1947 echo ' dt_style_selftest - Run dt-check-style fixture tests'; \ 1948 echo ' dtbs_check - Validate device tree source files';\ 1949 echo '') 1950 1951 @echo 'Userspace tools targets:' 1952 @echo ' use "make tools/help"' 1953 @echo ' or "cd tools; make help"' 1954 @echo '' 1955 @echo 'Kernel packaging:' 1956 @$(MAKE) -f $(srctree)/scripts/Makefile.package help 1957 @echo '' 1958 @echo 'Documentation targets:' 1959 @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp 1960 @echo '' 1961 @echo 'Architecture-specific targets ($(SRCARCH)):' 1962 @$(or $(archhelp),\ 1963 echo ' No architecture-specific help defined for $(SRCARCH)') 1964 @echo '' 1965 @$(if $(boards), \ 1966 $(foreach b, $(boards), \ 1967 printf " %-27s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ 1968 echo '') 1969 @$(if $(board-dirs), \ 1970 $(foreach b, $(board-dirs), \ 1971 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \ 1972 printf " %-16s - Show all of the above\\n" help-boards; \ 1973 echo '') 1974 1975 @echo ' make V=n [targets] 1: verbose build' 1976 @echo ' 2: give reason for rebuild of target' 1977 @echo ' V=1 and V=2 can be combined with V=12' 1978 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1979 @echo ' make C=1 [targets] Check re-compiled c source with $$CHECK' 1980 @echo ' (sparse by default)' 1981 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1982 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1983 @echo ' make W=n [targets] Enable extra build checks, n=1,2,3,c,e where' 1984 @echo ' 1: warnings which may be relevant and do not occur too often' 1985 @echo ' 2: warnings which occur quite often but may still be relevant' 1986 @echo ' 3: more obscure warnings, can most likely be ignored' 1987 @echo ' c: extra checks in the configuration stage (Kconfig)' 1988 @echo ' e: warnings are being treated as errors' 1989 @echo ' Multiple levels can be combined with W=12 or W=123' 1990 @echo ' make UT=1 [targets] Warn if a tracepoint is defined but not used.' 1991 @echo ' [ This will be removed when all current unused tracepoints are eliminated. ]' 1992 @$(if $(dtstree), \ 1993 echo ' make CHECK_DTBS=1 [targets] Check all generated dtb files against schema'; \ 1994 echo ' This can be applied both to "dtbs" and to individual "foo.dtb" targets' ; \ 1995 ) 1996 @echo '' 1997 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1998 @echo 'For further info see the ./README file' 1999 2000 2001help-board-dirs := $(addprefix help-,$(board-dirs)) 2002 2003help-boards: $(help-board-dirs) 2004 2005boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))) 2006 2007$(help-board-dirs): help-%: 2008 @echo 'Architecture-specific targets ($(SRCARCH) $*):' 2009 @$(if $(boards-per-dir), \ 2010 $(foreach b, $(boards-per-dir), \ 2011 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \ 2012 echo '') 2013 2014 2015# Documentation targets 2016# --------------------------------------------------------------------------- 2017DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ 2018 linkcheckdocs dochelp refcheckdocs texinfodocs infodocs mandocs \ 2019 htmldocs-redirects testdocs 2020 2021PHONY += $(DOC_TARGETS) 2022$(DOC_TARGETS): 2023 $(Q)$(MAKE) $(build)=Documentation $@ 2024 2025 2026# Rust targets 2027# --------------------------------------------------------------------------- 2028 2029# "Is Rust available?" target 2030PHONY += rustavailable 2031rustavailable: 2032 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh && echo "Rust is available!" 2033 2034# Documentation target 2035# 2036# Using the singular to avoid running afoul of `no-dot-config-targets`. 2037PHONY += rustdoc 2038rustdoc: prepare 2039 $(Q)$(MAKE) $(build)=rust $@ 2040 2041# Testing target 2042PHONY += rusttest 2043rusttest: prepare 2044 $(Q)$(MAKE) $(build)=rust $@ 2045 2046# Formatting targets 2047# 2048# Generated files as well as vendored crates are skipped. 2049PHONY += rustfmt rustfmtcheck 2050 2051rustfmt: 2052 $(Q)find $(srctree) $(RCS_FIND_IGNORE) \ 2053 \( \ 2054 -path $(srctree)/rust/proc-macro2 \ 2055 -o -path $(srctree)/rust/quote \ 2056 -o -path $(srctree)/rust/syn \ 2057 -o -path $(srctree)/rust/zerocopy \ 2058 -o -path $(srctree)/rust/zerocopy-derive \ 2059 \) -prune -o \ 2060 -type f -a -name '*.rs' -a ! -name '*generated*' -print \ 2061 | xargs $(RUSTFMT) $(rustfmt_flags) 2062 2063rustfmtcheck: rustfmt_flags = --check 2064rustfmtcheck: rustfmt 2065 2066# Misc 2067# --------------------------------------------------------------------------- 2068 2069PHONY += misc-check 2070misc-check: 2071 $(Q)$(srctree)/scripts/misc-check 2072 2073all: misc-check 2074 2075PHONY += scripts_gdb 2076scripts_gdb: prepare0 2077 $(Q)$(MAKE) $(build)=scripts/gdb 2078 $(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py) 2079 2080ifdef CONFIG_GDB_SCRIPTS 2081all: scripts_gdb 2082endif 2083 2084else # KBUILD_EXTMOD 2085 2086filechk_kernel.release = echo $(KERNELRELEASE) 2087 2088### 2089# External module support. 2090# When building external modules the kernel used as basis is considered 2091# read-only, and no consistency checks are made and the make 2092# system is not used on the basis kernel. If updates are required 2093# in the basis kernel ordinary make commands (without M=...) must be used. 2094 2095# We are always building only modules. 2096KBUILD_BUILTIN := 2097KBUILD_MODULES := y 2098 2099build-dir := . 2100 2101clean-dirs := . 2102clean: private rm-files := Module.symvers modules.nsdeps compile_commands.json 2103 2104PHONY += prepare 2105# now expand this into a simple variable to reduce the cost of shell evaluations 2106prepare: CC_VERSION_TEXT := $(CC_VERSION_TEXT) 2107prepare: PAHOLE_VERSION := $(PAHOLE_VERSION) 2108prepare: 2109 @if [ "$(CC_VERSION_TEXT)" != "$(CONFIG_CC_VERSION_TEXT)" ]; then \ 2110 echo >&2 "warning: the compiler differs from the one used to build the kernel"; \ 2111 echo >&2 " The kernel was built by: $(CONFIG_CC_VERSION_TEXT)"; \ 2112 echo >&2 " You are using: $(CC_VERSION_TEXT)"; \ 2113 fi 2114 @if [ "$(PAHOLE_VERSION)" != "$(CONFIG_PAHOLE_VERSION)" ]; then \ 2115 echo >&2 "warning: pahole version differs from the one used to build the kernel"; \ 2116 echo >&2 " The kernel was built with: $(CONFIG_PAHOLE_VERSION)"; \ 2117 echo >&2 " You are using: $(PAHOLE_VERSION)"; \ 2118 fi 2119 2120PHONY += help 2121help: 2122 @echo ' Building external modules.' 2123 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' 2124 @echo '' 2125 @echo ' modules - default target, build the module(s)' 2126 @echo ' modules_install - install the module' 2127 @echo ' clean - remove generated files in module directory only' 2128 @echo ' rust-analyzer - generate rust-project.json rust-analyzer support file' 2129 @echo '' 2130 2131ifndef CONFIG_MODULES 2132modules modules_install: __external_modules_error 2133__external_modules_error: 2134 @echo >&2 '***' 2135 @echo >&2 '*** The present kernel disabled CONFIG_MODULES.' 2136 @echo >&2 '*** You cannot build or install external modules.' 2137 @echo >&2 '***' 2138 @false 2139endif 2140 2141endif # KBUILD_EXTMOD 2142 2143# --------------------------------------------------------------------------- 2144# Modules 2145 2146PHONY += modules modules_install modules_sign modules_prepare 2147 2148modules_install: 2149 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst \ 2150 sign-only=$(if $(filter modules_install,$(MAKECMDGOALS)),,y) 2151 2152ifeq ($(CONFIG_MODULE_SIG),y) 2153# modules_sign is a subset of modules_install. 2154# 'make modules_install modules_sign' is equivalent to 'make modules_install'. 2155modules_sign: modules_install 2156 @: 2157else 2158modules_sign: 2159 @echo >&2 '***' 2160 @echo >&2 '*** CONFIG_MODULE_SIG is disabled. You cannot sign modules.' 2161 @echo >&2 '***' 2162 @false 2163endif 2164 2165ifdef CONFIG_MODULES 2166 2167modules.order: $(build-dir) 2168 @: 2169 2170# KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. 2171# This is solely useful to speed up test compiles. 2172modules: modpost 2173ifneq ($(KBUILD_MODPOST_NOFINAL),1) 2174 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal 2175endif 2176 2177PHONY += modules_check 2178modules_check: modules.order 2179 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $< 2180 2181else # CONFIG_MODULES 2182 2183modules: 2184 @: 2185 2186KBUILD_MODULES := 2187 2188endif # CONFIG_MODULES 2189 2190PHONY += modpost 2191modpost: $(if $(single-build),, $(if $(KBUILD_BUILTIN), vmlinux.o)) \ 2192 $(if $(KBUILD_MODULES), modules_check) 2193 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 2194 2195# Single targets 2196# --------------------------------------------------------------------------- 2197# To build individual files in subdirectories, you can do like this: 2198# 2199# make foo/bar/baz.s 2200# 2201# The supported suffixes for single-target are listed in 'single-targets' 2202# 2203# To build only under specific subdirectories, you can do like this: 2204# 2205# make foo/bar/baz/ 2206 2207ifdef single-build 2208 2209# .ko is special because modpost is needed 2210single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS))) 2211single-no-ko := $(filter-out $(single-ko), $(MAKECMDGOALS)) \ 2212 $(foreach x, o mod, $(patsubst %.ko, %.$x, $(single-ko))) 2213 2214$(single-ko): single_modules 2215 @: 2216$(single-no-ko): $(build-dir) 2217 @: 2218 2219# Remove modules.order when done because it is not the real one. 2220PHONY += single_modules 2221single_modules: $(single-no-ko) modules_prepare 2222 $(Q){ $(foreach m, $(single-ko), echo $(m:%.ko=%.o);) } > modules.order 2223 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 2224ifneq ($(KBUILD_MODPOST_NOFINAL),1) 2225 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal 2226endif 2227 $(Q)rm -f modules.order 2228 2229single-goals := $(addprefix $(build-dir)/, $(single-no-ko)) 2230 2231KBUILD_MODULES := y 2232 2233endif 2234 2235prepare: outputmakefile 2236 2237# Preset locale variables to speed up the build process. Limit locale 2238# tweaks to this spot to avoid wrong language settings when running 2239# make menuconfig etc. 2240# Error messages still appears in the original language 2241PHONY += $(build-dir) 2242$(build-dir): prepare 2243 $(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1 $(single-goals) 2244 2245clean-dirs := $(addprefix _clean_, $(clean-dirs)) 2246PHONY += $(clean-dirs) clean 2247$(clean-dirs): 2248 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 2249 2250clean: $(clean-dirs) 2251 $(call cmd,rmfiles) 2252 @find . $(RCS_FIND_IGNORE) \ 2253 \( -name '*.[aios]' -o -name '*.rsi' -o -name '*.ko' -o -name '.*.cmd' \ 2254 -o -name '*.ko.*' -o -name '*.o.thinlto.bc' \ 2255 -o -name '*.dtb' -o -name '*.dtbo' \ 2256 -o -name '*.dtb.S' -o -name '*.dtbo.S' \ 2257 -o -name '*.dt.yaml' -o -name 'dtbs-list' \ 2258 -o -name '*.dwo' -o -name '*.lst' \ 2259 -o -name '*.su' -o -name '*.mod' \ 2260 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 2261 -o -name '*.lex.c' -o -name '*.tab.[ch]' \ 2262 -o -name '*.asn1.[ch]' \ 2263 -o -name '*.symtypes' -o -name 'modules.order' \ 2264 -o -name '*.c.[012]*.*' \ 2265 -o -name '*.ll' \ 2266 -o -name '*.gcno' \ 2267 -o -name '*.long-type-*.txt' \ 2268 -o -name '*.header-check' \ 2269 \) -type f -print \ 2270 -o -name '.tmp_*' -print \ 2271 | xargs rm -rf 2272 2273# Generate tags for editors 2274# --------------------------------------------------------------------------- 2275quiet_cmd_tags = GEN $@ 2276 cmd_tags = $(BASH) $(srctree)/scripts/tags.sh $@ 2277 2278tags TAGS cscope gtags: FORCE 2279 $(call cmd,tags) 2280 2281# Generate rust-project.json (a file that describes the structure of non-Cargo 2282# Rust projects) for rust-analyzer (an implementation of the Language Server 2283# Protocol). 2284PHONY += rust-analyzer 2285rust-analyzer: 2286 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh 2287ifdef KBUILD_EXTMOD 2288# FIXME: external modules must not descend into a sub-directory of the kernel 2289 $(Q)$(MAKE) $(build)=$(objtree)/rust src=$(srctree)/rust $@ 2290else 2291 $(Q)$(MAKE) $(build)=rust $@ 2292endif 2293 2294# Script to generate missing namespace dependencies 2295# --------------------------------------------------------------------------- 2296 2297PHONY += nsdeps 2298nsdeps: export KBUILD_NSDEPS=1 2299nsdeps: modules 2300 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/nsdeps 2301 2302# Script to generate .spdx.json SBOM documents describing the build 2303# --------------------------------------------------------------------------- 2304 2305ifdef building_out_of_srctree 2306sbom_targets := sbom-source.spdx.json 2307endif 2308sbom_targets += sbom-build.spdx.json sbom-output.spdx.json 2309quiet_cmd_sbom = GEN $(sbom_targets) 2310 cmd_sbom = printf "%s\n" "$(KBUILD_IMAGE)" >"$(tmp-target)"; \ 2311 $(if $(CONFIG_MODULES),sed 's/\.o$$/.ko/' $(objtree)/modules.order >> "$(tmp-target)";) \ 2312 $(PYTHON3) $(srctree)/scripts/sbom/sbom.py \ 2313 --src-tree $(abspath $(srctree)) \ 2314 --obj-tree $(abspath $(objtree)) \ 2315 --roots-file "$(tmp-target)" \ 2316 --output-directory $(abspath $(objtree)) \ 2317 --generate-spdx \ 2318 --package-license "GPL-2.0 WITH Linux-syscall-note" \ 2319 --package-version "$(KERNELVERSION)" \ 2320 --write-output-on-error; 2321PHONY += sbom 2322sbom: $(notdir $(KBUILD_IMAGE)) include/generated/autoconf.h $(if $(CONFIG_MODULES),modules modules.order) 2323 $(call cmd,sbom) 2324 2325# Clang Tooling 2326# --------------------------------------------------------------------------- 2327 2328quiet_cmd_gen_compile_commands = GEN $@ 2329 cmd_gen_compile_commands = $(PYTHON3) $< -a $(AR) -o $@ $(filter-out $<, $(real-prereqs)) 2330 2331compile_commands.json: $(srctree)/scripts/clang-tools/gen_compile_commands.py \ 2332 $(if $(KBUILD_EXTMOD),, vmlinux.a $(KBUILD_VMLINUX_LIBS)) \ 2333 $(if $(CONFIG_MODULES), modules.order) FORCE 2334 $(call if_changed,gen_compile_commands) 2335 2336targets += compile_commands.json 2337 2338PHONY += clang-tidy clang-analyzer 2339 2340ifdef CONFIG_CC_IS_CLANG 2341quiet_cmd_clang_tools = CHECK $< 2342 cmd_clang_tools = $(PYTHON3) $(srctree)/scripts/clang-tools/run-clang-tools.py $@ $< 2343 2344clang-tidy clang-analyzer: compile_commands.json 2345 $(call cmd,clang_tools) 2346else 2347clang-tidy clang-analyzer: 2348 @echo "$@ requires CC=clang" >&2 2349 @false 2350endif 2351 2352# Scripts to check various things for consistency 2353# --------------------------------------------------------------------------- 2354 2355PHONY += includecheck versioncheck coccicheck kconfig-sym-check 2356 2357includecheck: 2358 find $(srctree)/* $(RCS_FIND_IGNORE) \ 2359 -name '*.[hcS]' -type f -print | sort \ 2360 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl 2361 2362versioncheck: 2363 find $(srctree)/* $(RCS_FIND_IGNORE) \ 2364 -name '*.[hcS]' -type f -print | sort \ 2365 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl 2366 2367coccicheck: 2368 $(Q)$(BASH) $(srctree)/scripts/$@ 2369 2370kconfig-sym-check: 2371 $(Q)$(PERL) $(srctree)/scripts/kconfig/kconfig-sym-check.pl $(srctree) $(KCONFIG_SYM_CHECK_EXCLUDES) 2372 2373PHONY += checkstack kernelrelease kernelversion image_name 2374 2375# UML needs a little special treatment here. It wants to use the host 2376# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone 2377# else wants $(ARCH), including people doing cross-builds, which means 2378# that $(SUBARCH) doesn't work here. 2379ifeq ($(ARCH), um) 2380CHECKSTACK_ARCH := $(SUBARCH) 2381else 2382CHECKSTACK_ARCH := $(ARCH) 2383endif 2384MINSTACKSIZE ?= 100 2385checkstack: 2386 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ 2387 $(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) $(MINSTACKSIZE) 2388 2389kernelrelease: 2390 @$(filechk_kernel.release) 2391 2392kernelversion: 2393 @echo $(KERNELVERSION) 2394 2395image_name: 2396 @echo $(KBUILD_IMAGE) 2397 2398PHONY += run-command 2399run-command: 2400 $(Q)$(KBUILD_RUN_COMMAND) 2401 2402quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 2403 cmd_rmfiles = rm -rf $(rm-files) 2404 2405# read saved command lines for existing targets 2406existing-targets := $(wildcard $(sort $(targets))) 2407 2408-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) 2409 2410endif # config-build 2411endif # mixed-build 2412endif # need-sub-make 2413 2414PHONY += FORCE 2415FORCE: 2416 2417# Declare the contents of the PHONY variable as phony. We keep that 2418# information in a variable so we can use it in if_changed and friends. 2419.PHONY: $(PHONY) 2420