xref: /linux/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/sound/samsung,midas-audio.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung Midas audio complex with WM1811 codec
8
9maintainers:
10  - Sylwester Nawrocki <s.nawrocki@samsung.com>
11
12allOf:
13  - $ref: sound-card-common.yaml#
14
15properties:
16  compatible:
17    const: samsung,midas-audio
18
19  cpu:
20    type: object
21    additionalProperties: false
22    properties:
23      sound-dai:
24        maxItems: 1
25        description: phandle to the I2S controller
26    required:
27      - sound-dai
28
29  codec:
30    type: object
31    additionalProperties: false
32    properties:
33      sound-dai:
34        maxItems: 1
35        description: phandle to the WM1811 CODEC
36    required:
37      - sound-dai
38
39  samsung,audio-routing:
40    deprecated: true
41    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
42    description: |
43      List of the connections between audio components; each entry is
44      a pair of strings, the first being the connection's sink, the second
45      being the connection's source; valid names for sources and sinks are
46      the WM1811's pins (as documented in its binding), and the jacks
47      on the board: HP, SPK, Main Mic, Sub Mic, Headset Mic.
48      Deprecated, use audio-routing.
49
50  mic-bias-supply:
51    description: Supply for the micbias on the Main microphone
52
53  submic-bias-supply:
54    description: Supply for the micbias on the Sub microphone
55
56  headset-mic-bias-supply:
57    description: Supply for the micbias on the Headset microphone
58
59  fm-sel-gpios:
60    maxItems: 1
61    description: GPIO pin for FM selection
62
63  lineout-sel-gpios:
64    maxItems: 1
65    description: GPIO pin for line out selection
66
67  headset-detect-gpios:
68    maxItems: 1
69    description: GPIO for detection of headset insertion
70
71  headset-key-gpios:
72    maxItems: 1
73    description: GPIO for detection of headset key press
74
75  io-channels:
76    maxItems: 1
77    description: IO channel to read micbias voltage for headset detection
78
79  io-channel-names:
80    const: headset-detect
81
82  samsung,headset-4pole-threshold-microvolt:
83    minItems: 2
84    maxItems: 2
85    description:
86      Array containing minimum and maximum IO channel value for 4-pole
87      (with microphone/button) headsets. If the IO channel value is
88      outside of this range, a 3-pole headset is assumed.
89
90  samsung,headset-button-threshold-microvolt:
91    minItems: 3
92    maxItems: 3
93    description: |
94      Array of minimum (inclusive) IO channel values for headset button
95      detection, in order: "Media", "Volume Up" and "Volume Down".
96
97required:
98  - compatible
99  - cpu
100  - codec
101  - audio-routing
102  - mic-bias-supply
103  - submic-bias-supply
104
105unevaluatedProperties: false
106
107examples:
108  - |
109    #include <dt-bindings/gpio/gpio.h>
110
111    sound {
112        compatible = "samsung,midas-audio";
113        model = "Midas";
114
115        fm-sel-gpios = <&gpaa0 3 GPIO_ACTIVE_HIGH>;
116
117        mic-bias-supply = <&mic_bias_reg>;
118        submic-bias-supply = <&submic_bias_reg>;
119
120        audio-routing =
121                "HP", "HPOUT1L",
122                "HP", "HPOUT1R",
123
124                "SPK", "SPKOUTLN",
125                "SPK", "SPKOUTLP",
126                "SPK", "SPKOUTRN",
127                "SPK", "SPKOUTRP",
128
129                "RCV", "HPOUT2N",
130                "RCV", "HPOUT2P",
131
132                "IN1LP", "Main Mic",
133                "IN1LN", "Main Mic",
134                "IN1RP", "Sub Mic",
135                "IN1LP", "Sub Mic";
136
137        cpu {
138            sound-dai = <&i2s0>;
139        };
140
141        codec {
142            sound-dai = <&wm1811>;
143        };
144
145    };
146