1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/reset/socionext,uniphier-glue-reset.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Socionext UniPhier peripheral core reset in glue layer 8 9description: | 10 Some peripheral core reset belongs to its own glue layer. Before using 11 this core reset, it is necessary to control the clocks and resets to 12 enable this layer. These clocks and resets should be described in each 13 property. 14 15maintainers: 16 - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> 17 18properties: 19 compatible: 20 enum: 21 - socionext,uniphier-pro4-usb3-reset 22 - socionext,uniphier-pro5-usb3-reset 23 - socionext,uniphier-pxs2-usb3-reset 24 - socionext,uniphier-ld20-usb3-reset 25 - socionext,uniphier-pxs3-usb3-reset 26 - socionext,uniphier-nx1-usb3-reset 27 - socionext,uniphier-pro4-ahci-reset 28 - socionext,uniphier-pxs2-ahci-reset 29 - socionext,uniphier-pxs3-ahci-reset 30 31 reg: 32 maxItems: 1 33 34 "#reset-cells": 35 const: 1 36 37 clocks: 38 minItems: 1 39 maxItems: 2 40 41 clock-names: 42 minItems: 1 43 maxItems: 2 44 45 resets: 46 minItems: 1 47 maxItems: 2 48 49 reset-names: 50 minItems: 1 51 maxItems: 2 52 53allOf: 54 - if: 55 properties: 56 compatible: 57 contains: 58 enum: 59 - socionext,uniphier-pro4-usb3-reset 60 - socionext,uniphier-pro5-usb3-reset 61 - socionext,uniphier-pro4-ahci-reset 62 then: 63 properties: 64 clocks: 65 minItems: 2 66 maxItems: 2 67 clock-names: 68 items: 69 - const: gio 70 - const: link 71 resets: 72 minItems: 2 73 maxItems: 2 74 reset-names: 75 items: 76 - const: gio 77 - const: link 78 else: 79 properties: 80 clocks: 81 maxItems: 1 82 clock-names: 83 const: link 84 resets: 85 maxItems: 1 86 reset-names: 87 const: link 88 89additionalProperties: false 90 91required: 92 - compatible 93 - reg 94 - "#reset-cells" 95 - clocks 96 - clock-names 97 - resets 98 - reset-names 99 100examples: 101 - | 102 usb_rst: reset-controller@0 { 103 compatible = "socionext,uniphier-ld20-usb3-reset"; 104 reg = <0x0 0x4>; 105 #reset-cells = <1>; 106 clock-names = "link"; 107 clocks = <&sys_clk 14>; 108 reset-names = "link"; 109 resets = <&sys_rst 14>; 110 }; 111