xref: /linux/Documentation/devicetree/bindings/power/supply/qcom,pm8916-lbc.yaml (revision 0ea5c948cb64bab5bc7a5516774eb8536f05aa0d) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/power/supply/qcom,pm8916-lbc.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Linear Battery Charger
8
9maintainers:
10  - Nikita Travkin <nikita@trvn.ru>
11
12description:
13  Linear Battery Charger hardware block, found in some Qualcomm PMICs
14  such as pm8916. Implements a simple, autonomous CC/CV charger.
15
16allOf:
17  - $ref: power-supply.yaml#
18
19properties:
20  compatible:
21    const: qcom,pm8916-lbc
22
23  reg:
24    items:
25      - description: Charger
26      - description: Battery
27      - description: USB
28      - description: MISC
29
30  reg-names:
31    items:
32      - const: chgr
33      - const: bat_if
34      - const: usb
35      - const: misc
36
37  interrupts:
38    items:
39      - description: Battery detection
40      - description: Fast charging
41      - description: Charging failed
42      - description: Charging done
43      - description: Battery present
44      - description: Battery temperature OK
45      - description: USB coarse detection
46      - description: USB IN valid
47      - description: Charger gone
48      - description: Overtemperature
49
50  interrupt-names:
51    items:
52      - const: vbat_det
53      - const: fast_chg
54      - const: chg_fail
55      - const: chg_done
56      - const: bat_pres
57      - const: temp_ok
58      - const: coarse_det
59      - const: usb_vbus
60      - const: chg_gone
61      - const: overtemp
62
63  qcom,fast-charge-safe-voltage:
64    $ref: /schemas/types.yaml#/definitions/uint32
65    minimum: 4000000
66    maximum: 4775000
67    description:
68      Maximum safe battery voltage in uV; May be pre-set by bootloader,
69      in which case, setting this will harmlessly fail.
70
71  qcom,fast-charge-safe-current:
72    $ref: /schemas/types.yaml#/definitions/uint32
73    minimum: 90000
74    maximum: 1440000
75    description:
76      Maximum safe battery charge current in uA; May be pre-set by
77      bootloader, in which case setting this will harmlessly fail.
78
79  monitored-battery: true
80
81required:
82  - compatible
83  - reg
84  - interrupts
85  - interrupt-names
86  - qcom,fast-charge-safe-voltage
87  - qcom,fast-charge-safe-current
88
89additionalProperties: false
90
91examples:
92  - |
93    #include <dt-bindings/interrupt-controller/irq.h>
94    pmic {
95      #address-cells = <1>;
96      #size-cells = <0>;
97
98      charger@1000 {
99        compatible = "qcom,pm8916-lbc";
100        reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
101        reg-names = "chgr", "bat_if", "usb", "misc";
102
103        interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
104                     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
105                     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
106                     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
107                     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
108                     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
109                     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
110                     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
111                     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
112                     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
113        interrupt-names = "vbat_det",
114                          "fast_chg",
115                          "chg_fail",
116                          "chg_done",
117                          "bat_pres",
118                          "temp_ok",
119                          "coarse_det",
120                          "usb_vbus",
121                          "chg_gone",
122                          "overtemp";
123        monitored-battery = <&battery>;
124
125        qcom,fast-charge-safe-current = <900000>;
126        qcom,fast-charge-safe-voltage = <4300000>;
127      };
128    };
129