xref: /linux/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml (revision 06d07429858317ded2db7986113a9e0129cd599b)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sdm630-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SDM630 and SDM660 TLMM pin controller
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
12
13description:
14  Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC.
15
16allOf:
17  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
18
19properties:
20  compatible:
21    enum:
22      - qcom,sdm630-pinctrl
23      - qcom,sdm660-pinctrl
24
25  reg:
26    maxItems: 3
27
28  reg-names:
29    items:
30      - const: south
31      - const: center
32      - const: north
33
34  interrupts:
35    maxItems: 1
36
37  gpio-reserved-ranges:
38    minItems: 1
39    maxItems: 57
40
41  gpio-line-names:
42    maxItems: 114
43
44patternProperties:
45  "-state$":
46    oneOf:
47      - $ref: "#/$defs/qcom-sdm630-tlmm-state"
48      - patternProperties:
49          "-pins$":
50            $ref: "#/$defs/qcom-sdm630-tlmm-state"
51        additionalProperties: false
52
53$defs:
54  qcom-sdm630-tlmm-state:
55    type: object
56    description:
57      Pinctrl node's client devices use subnodes for desired pin configuration.
58      Client device subnodes use below standard properties.
59    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
60    unevaluatedProperties: false
61
62    properties:
63      pins:
64        description:
65          List of gpio pins affected by the properties specified in this
66          subnode.
67        items:
68          oneOf:
69            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$"
70            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
71                      sdc2_cmd, sdc2_data ]
72        minItems: 1
73        maxItems: 36
74
75      function:
76        description:
77          Specify the alternative function to be configured for the specified
78          pins.
79        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
80                atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1,
81                atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
82                atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20,
83                atest_usb21, atest_usb22, atest_usb23, audio_ref, bimc_dte0,
84                bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
85                blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8_a, blsp_i2c8_b,
86                blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
87                blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8_a,
88                blsp_spi8_b, blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1,
89                blsp_uart2, blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1,
90                blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, cci_i2c,
91                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, gcc_gp1,
92                gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c,
93                isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync,
94                mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte,
95                nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0,
96                phase_flag1, phase_flag10, phase_flag11, phase_flag12,
97                phase_flag13, phase_flag14, phase_flag15, phase_flag16,
98                phase_flag17, phase_flag18, phase_flag19, phase_flag2,
99                phase_flag20, phase_flag21, phase_flag22, phase_flag23,
100                phase_flag24, phase_flag25, phase_flag26, phase_flag27,
101                phase_flag28, phase_flag29, phase_flag3, phase_flag30,
102                phase_flag31, phase_flag4, phase_flag5, phase_flag6,
103                phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, pll_reset,
104                pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, pwr_modem,
105                pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, qdss_cti1_b,
106                qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
107                qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2,
108                qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
109                qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, qspi_clk,
110                qspi_cs, qspi_data0, qspi_data1, qspi_data2, qspi_data3,
111                qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, sp_cmu,
112                ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, uim1_clk,
113                uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
114                uim2_present, uim2_reset, uim_batt, vfr_1, vsense_clkout,
115                vsense_data0, vsense_data1, vsense_mode, wlan1_adc0,
116                wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
117
118    required:
119      - pins
120
121required:
122  - compatible
123  - reg
124
125unevaluatedProperties: false
126
127examples:
128  - |
129    #include <dt-bindings/interrupt-controller/arm-gic.h>
130
131    tlmm: pinctrl@3100000 {
132        compatible = "qcom,sdm630-pinctrl";
133        reg = <0x03100000 0x400000>,
134              <0x03500000 0x400000>,
135              <0x03900000 0x400000>;
136        reg-names = "south", "center", "north";
137        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
138        gpio-controller;
139        gpio-ranges = <&tlmm 0 0 114>;
140        #gpio-cells = <2>;
141        interrupt-controller;
142        #interrupt-cells = <2>;
143
144        blsp1-uart1-default-state {
145            pins = "gpio0", "gpio1", "gpio2", "gpio3";
146            function = "gpio";
147            drive-strength = <2>;
148            bias-disable;
149        };
150
151        blsp2_uart1_default: blsp2-uart1-active-state {
152            tx-rts-pins {
153                pins = "gpio16", "gpio19";
154                function = "blsp_uart5";
155                drive-strength = <2>;
156                bias-disable;
157            };
158
159            rx-pins {
160                pins = "gpio17";
161                function = "blsp_uart5";
162                drive-strength = <2>;
163                bias-pull-up;
164            };
165
166            cts-pins {
167                pins = "gpio18";
168                function = "blsp_uart5";
169                drive-strength = <2>;
170                bias-pull-down;
171            };
172        };
173    };
174