xref: /linux/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/phy/marvell,armada-cp110-utmi-phy.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: Marvell Armada CP110/CP115 UTMI PHY
9
10maintainers:
11  - Konstantin Porotchkin <kostap@marvell.com>
12
13description:
14  On Armada 7k/8k and CN913x, there are two host and one device USB controllers.
15  Each of two exiting UTMI PHYs could be connected to either USB host or USB device
16  controller.
17  The USB device controller can only be connected to a single UTMI PHY port
18                      0.H----- USB HOST0
19  UTMI PHY0  --------/
20                      0.D-----0
21                               \------ USB DEVICE
22                      1.D-----1
23  UTMI PHY1  --------\
24                      1.H----- USB HOST1
25
26properties:
27  compatible:
28    const: marvell,cp110-utmi-phy
29
30  reg:
31    maxItems: 1
32
33  "#address-cells":
34    const: 1
35
36  "#size-cells":
37    const: 0
38
39  marvell,system-controller:
40    description:
41      Phandle to the system controller node
42    $ref: /schemas/types.yaml#/definitions/phandle
43
44  swap-dx-lanes:
45    $ref: /schemas/types.yaml#/definitions/uint32-array
46    description: |
47      Specifies the ports which will swap the differential-pair (D+/D-),
48      default is not-swapped.
49
50# Required child nodes:
51
52patternProperties:
53  "^usb-phy@[0|1]$":
54    type: object
55    description:
56      Each UTMI PHY port must be represented as a sub-node.
57
58    properties:
59      reg:
60        description: phy port index.
61        maxItems: 1
62
63      "#phy-cells":
64        const: 0
65
66    required:
67      - reg
68      - "#phy-cells"
69
70    additionalProperties: false
71
72required:
73  - compatible
74  - reg
75  - "#address-cells"
76  - "#size-cells"
77  - marvell,system-controller
78
79additionalProperties: false
80
81examples:
82  - |
83    cp0_utmi: utmi@580000 {
84      compatible = "marvell,cp110-utmi-phy";
85      reg = <0x580000 0x2000>;
86      marvell,system-controller = <&cp0_syscon0>;
87      #address-cells = <1>;
88      #size-cells = <0>;
89
90      cp0_utmi0: usb-phy@0 {
91        reg = <0>;
92        #phy-cells = <0>;
93      };
94
95      cp0_utmi1: usb-phy@1 {
96        reg = <1>;
97        #phy-cells = <0>;
98      };
99    };
100
101    cp0_usb3_0 {
102      usb-phy = <&cp0_usb3_0_phy0>;
103      phys = <&cp0_utmi0>;
104      phy-names = "utmi";
105      /* UTMI0 is connected to USB host controller (default mode) */
106      dr_mode = "host";
107    };
108
109    cp0_usb3_1 {
110      usb-phy = <&cp0_usb3_0_phy1>;
111      phys = <&cp0_utmi1>;
112      phy-names = "utmi";
113      /* UTMI1 is connected to USB device controller */
114      dr_mode = "peripheral";
115    };
116