xref: /linux/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml (revision 2f2c7254931f41b5736e3ba12aaa9ac1bbeeeb92)

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/st,stm32-pcie-host.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: STMicroelectronics STM32MP25 PCIe Root Complex

maintainers:
  - Christian Bruel <christian.bruel@foss.st.com>

description:
  PCIe root complex controller based on the Synopsys DesignWare PCIe core.

allOf:
  - $ref: /schemas/pci/snps,dw-pcie.yaml#
  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#

properties:
  compatible:
    const: st,stm32mp25-pcie-rc

  reg:
    items:
      - description: Data Bus Interface (DBI) registers.
      - description: PCIe configuration registers.

  reg-names:
    items:
      - const: dbi
      - const: config

  msi-parent:
    maxItems: 1

patternProperties:
  '^pcie@[0-2],0$':
    type: object
    $ref: /schemas/pci/pci-pci-bridge.yaml#

    properties:
      reg:
        maxItems: 1

      phys:
        maxItems: 1

      reset-gpios:
        description: GPIO controlled connection to PERST# signal
        maxItems: 1

      wake-gpios:
        description: GPIO used as WAKE# input signal
        maxItems: 1

    required:
      - phys
      - ranges

    unevaluatedProperties: false

required:
  - interrupt-map
  - interrupt-map-mask
  - ranges
  - dma-ranges

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/phy/phy.h>
    #include <dt-bindings/reset/st,stm32mp25-rcc.h>

    pcie@48400000 {
        compatible = "st,stm32mp25-pcie-rc";
        device_type = "pci";
        reg = <0x48400000 0x400000>,
              <0x10000000 0x10000>;
        reg-names = "dbi", "config";
        #interrupt-cells = <1>;
        interrupt-map-mask = <0 0 0 7>;
        interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
                        <0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
                        <0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
                        <0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
        #address-cells = <3>;
        #size-cells = <2>;
        ranges = <0x01000000 0x0 0x00000000 0x10010000 0x0 0x10000>,
                 <0x02000000 0x0 0x10020000 0x10020000 0x0 0x7fe0000>,
                 <0x42000000 0x0 0x18000000 0x18000000 0x0 0x8000000>;
        dma-ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x80000000>;
        clocks = <&rcc CK_BUS_PCIE>;
        resets = <&rcc PCIE_R>;
        msi-parent = <&v2m0>;
        access-controllers = <&rifsc 68>;
        power-domains = <&CLUSTER_PD>;

        pcie@0,0 {
            device_type = "pci";
            reg = <0x0 0x0 0x0 0x0 0x0>;
            phys = <&combophy PHY_TYPE_PCIE>;
            wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
            reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
            #address-cells = <3>;
            #size-cells = <2>;
            ranges;
        };
    };