xref: /linux/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml (revision 8be98d2f2a0a262f8bf8a0bc1fdf522b3c7aab17) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iio/light/upisemi,us5182.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: UPISEMI us5182d I2C ALS and Proximity sensor
8
9maintainers:
10  - Jonathan Cameron <jic23@kernel.org>
11
12properties:
13  compatible:
14    const: upisemi,usd5182
15
16  reg:
17    maxItems: 1
18
19  upisemi,glass-coef:
20    $ref: /schemas/types.yaml#/definitions/uint32
21    description: |
22      glass attenuation factor - compensation factor of resolution 1000
23      for material transmittance.
24    default: 1000
25
26  upisemi,dark-ths:
27    $ref: /schemas/types.yaml#/definitions/uint16-array
28    minItems: 8
29    maxItems: 8
30    description:
31      16-bit thresholds (adc counts) corresponding to every scale.
32
33  upisemi,upper-dark-gain:
34    $ref: /schemas/types.yaml#/definitions/uint8
35    description: |
36      8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4)
37      applied when light > threshold.
38    default: 0
39
40  upisemi,lower-dark-gain:
41    $ref: /schemas/types.yaml#/definitions/uint8
42    description: |
43      8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4)
44      applied when light < threshold.
45    default: 0x16
46
47  upisemi,continuous:
48    $ref: /schemas/types.yaml#/definitions/flag
49    description: |
50      This chip has two power modes: one-shot (chip takes one measurement and
51      then shuts itself down) and continuous (chip takes continuous
52      measurements). The one-shot mode is more power-friendly but the
53      continuous mode may be more reliable. If this property is specified
54      the continuous mode will be used instead of the default one-shot one for
55      raw reads.
56
57additionalProperties: false
58
59required:
60  - compatible
61  - reg
62
63examples:
64  - |
65    i2c {
66        #address-cells = <1>;
67        #size-cells = <0>;
68
69        light-sensor@39 {
70            compatible = "upisemi,usd5182";
71            reg = <0x39>;
72            upisemi,glass-coef = < 1000 >;
73            upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
74            upisemi,upper-dark-gain = /bits/ 8 <0x00>;
75            upisemi,lower-dark-gain = /bits/ 8 <0x16>;
76        };
77    };
78...
79