xref: /linux/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml (revision 69bfec7548f4c1595bac0e3ddfc0458a5af31f4c) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: InvenSense ICM-426xx Inertial Measurement Unit
8
9maintainers:
10  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
11
12description: |
13  6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
14  accelerometer.
15
16  It has a configurable host interface that supports I3C, I2C and SPI serial
17  communication, features a 2kB FIFO and 2 programmable interrupts with
18  ultra-low-power wake-on-motion support to minimize system power consumption.
19
20  Other industry-leading features include InvenSense on-chip APEX Motion
21  Processing engine for gesture recognition, activity classification, and
22  pedometer, along with programmable digital filters, and an embedded
23  temperature sensor.
24
25  https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
26
27properties:
28  compatible:
29    enum:
30      - invensense,icm42600
31      - invensense,icm42602
32      - invensense,icm42605
33      - invensense,icm42622
34      - invensense,icm42631
35
36  reg:
37    maxItems: 1
38
39  interrupts:
40    maxItems: 1
41
42  drive-open-drain:
43    type: boolean
44
45  vdd-supply:
46    description: Regulator that provides power to the sensor
47
48  vddio-supply:
49    description: Regulator that provides power to the bus
50
51  spi-cpha: true
52  spi-cpol: true
53
54required:
55  - compatible
56  - reg
57  - interrupts
58
59allOf:
60  - $ref: /schemas/spi/spi-peripheral-props.yaml#
61
62unevaluatedProperties: false
63
64examples:
65  - |
66    #include <dt-bindings/gpio/gpio.h>
67    #include <dt-bindings/interrupt-controller/irq.h>
68    i2c {
69        #address-cells = <1>;
70        #size-cells = <0>;
71
72        icm42605@68 {
73            compatible = "invensense,icm42605";
74            reg = <0x68>;
75            interrupt-parent = <&gpio2>;
76            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
77            vdd-supply = <&vdd>;
78            vddio-supply = <&vddio>;
79        };
80    };
81  - |
82    #include <dt-bindings/gpio/gpio.h>
83    #include <dt-bindings/interrupt-controller/irq.h>
84    spi {
85        #address-cells = <1>;
86        #size-cells = <0>;
87
88        icm42602@0 {
89            compatible = "invensense,icm42602";
90            reg = <0>;
91            spi-max-frequency = <24000000>;
92            spi-cpha;
93            spi-cpol;
94            interrupt-parent = <&gpio1>;
95            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
96            vdd-supply = <&vdd>;
97            vddio-supply = <&vddio>;
98        };
99    };
100