Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'for-6.11/trivial' into for-linus

Couple of trivial fixes:
- extra semicolon (Chen Ni)
- typo (Thorsten Blum)

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc an

Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:

- big IIO driver updates with more devices and drivers added

- fpga driver updates

- hyper-v driver updates

- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now

- binder minor updates

- mhi driver updates

- excon driver updates

- counter driver updates

- accessability driver updates

- coresight driver updates

- other hwtracing driver updates

- nvmem driver updates

- slimbus driver updates

- spmi driver updates

- other smaller misc and char driver updates

All of these have been in linux-next for a while with no reported
issues"

* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...

show more ...

Merge tag 'iio-for-6.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of new device support, features and cleanup for 6.10 (

Merge tag 'iio-for-6.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of new device support, features and cleanup for 6.10 (take 2)

The usual mixed bag from towards the end of the cycle.
Changes since take 1. Fixed the fixes tag and indeed fixed a rebase I
messed up on the same fix.

New devices support
===================

invensense,icm42600
- Support the ICM-42686-P a high range device going up to 32g and 4000 dps

New features
============

adi,ad7944
- Add support for chain mode in which many ADCs may be daisy chained and
read out via a single long read.
adi,ad9467/backend library
- Add bus tuning related interfaces.
adi,axi-adc
- Add control for the AXI clock - seems always enabled early in boot for other
reasons, but the driver should not rely on that..

Cleanups and minor or late breaking fixes
=========================================

Micrsoft/ACPI mount matrix handling.
- Replace several implementations of the Microsoft defined ROTM ACPI
method with a single one.
multiple drivers
- Don't call the result of wait_for_completion() timeout as it's
more accurate as time_left.
adi,ad7266
- Stop setting the iio_dev->masklength as it's done by the IIO core and
should not be set from drivers.
adi,ad799x
- Some checkpatch type fixes.
adi,ad9839
- Ensure compelte MU_CNT1 is written during lock phase.
adi,axi-dac
- Fix inverted parameter.
adi,adis16475
- Drop documentation of non existent sysfs files.
avago,apds9306
- Fix an off by one error that overly restricts the range of persistence
and adaptive thresholds that the driver accepts.
freescale,mxs-lradc
- Stop setting the iio_dev->masklength as it's done by the IIO core and
should not be set from drivers.
invensense,timestamp library
- Fix timestamp vs interupt alignment and aovid soms glitches that
occured when switching sampling frequency.
microchip,mcp3564
- Make use of device_for_each_child_node_scoped() to allow early release
without manual fwnode_handle_put().
microchip,mcp9600
- Allow for negative temperatures.
microchip,pac1934
- Avoid an out of bounds array index.
richtek,rtq6056
- Use iio_device_claim_direct_scoped() to automate lock release and simplify
the code.
sensortek,stk3110
- Drop a likely incorrect ACPI ID. No known users of this ID and it's
not a valid ACPI ID.
ti,ads1015
- Make use of device_for_each_child_node_scoped() to allow early release
without manual fwnode_handle_put().

* tag 'iio-for-6.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits)
iio: temperature: mcp9600: Fix temperature reading for negative values
iio: adc: PAC1934: fix accessing out of bounds array index
iio: invensense: fix timestamp glitches when switching frequency
iio: invensense: fix interrupt timestamp alignment
iio: dac: ad9739a: write complete MU_CNT1 register during lock
iio: pressure: zpa2326: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: twl6030-gpadc: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: stm32-dfsdm-adc: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: stm32-adc: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: intel_mrfld_adc: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: fsl-imx25-gcq: use 'time_left' variable with wait_for_completion_interruptible_timeout()
iio: adc: exynos_adc: use 'time_left' variable with wait_for_completion_timeout()
iio: adc: ad_sigma_delta: use 'time_left' variable with wait_for_completion_timeout()
iio: adc: ti-ads1015: use device_for_each_child_node_scoped()
iio: adc: ad799x: Prefer to use octal permission
iio: adc: ad799x: add blank line to avoid warning messages
iio: adc: ad799x: change 'unsigned' to 'unsigned int' declaration
iio: adc: mcp3564: Use device_for_each_child_node_scoped()
iio: adc: ad9467: support digital interface calibration
iio: adc: adi-axi-adc: support digital interface calibration
...

show more ...

dt-bindings: iio: imu: add icm42686 inside inv_icm42600

Add bindings for ICM-42686-P chip supporting high FSRs.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Acked-by: Rob

dt-bindings: iio: imu: add icm42686 inside inv_icm42600

Add bindings for ICM-42686-P chip supporting high FSRs.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240422152240.85974-2-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge tag 'iio-for-6.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.10

The An

Merge tag 'iio-for-6.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.10

The Analog Device team (Paul Cercueil and Nuno Sa) have been working on
improving high speed device handling. They have had some support in their
own tree for many years, so it is great to see them bring it to upstream.
Some of that is seen here, with the first output device using the
IIO dmaengine infrastructure and a new DAC backend FPGA IP driver.
This makes use of a new set of interfaces to allow backend and
front end driver communication in a fashion that in theory at least
allows for a single driver for a given ADC / DAC independent of
the IP to which is being used to deal with the data bus and DMA aspects
of working with these devices. It is early days for this new
generic way of handling split devices, but as it's kernel internals only
we can merrily change anything about it as a wider diversity of devices
show up and we get a better feel for what works.

Alongside the usual set of new drivers and features we have
the automatic cleanup of fwnode_handle_put() which didn't quite make
it in last cycle. The equivalent DT version was merged by Rob Herring
via the DT binding tree and one patch using that in IIO can also be
found in this pull request. Rob has been making extensive use of that
infrastructure in the DT core which is good to see and provides more
evidence this basic approach is useful.

In some cases, the IIO driver was converted over from DT only to
using the generic firmware description handling of property.h
including using the new macros. The general preference for IIO
is to use this more generic handling where possible - a bunch of other
drivers have been converted this cycle as well.

New device support
==================

adi,ad7173
- New driver supporting AD7172-2, AD7172-4 AD7173-9, AD7175-2, AD7175-8,
AD7176-2 and AD7177-2 ADCs.
- Follow up fix for an accidental use of logic not instead of bitwise.

adi,ad7944
- New driver supporting AD7944, AD7985 and AD7986 pin compatible ADCs.
- Later patch added use of new spi_optimize_message() to reduce overheads
of setting up a reused message.
- Additional changes later in series reduced code duplication.

adi,ad9739a RF DAC
- New driver for this 14-bit 2.5 GSPS DAC via an LVDS interface.

adi,axi-dac
- Support for this FPGA IP used to send data to high performance DACs over
an interface such as JESD204B/C or parallel interfaces. Used in
conjunction with a DAC driver. The initial user is the ad9739a.
The dmaengine-buffer needed various changes to make it bidirectional.

avago,apds9306
- New driver for this ambient light sensor.
- Fix much later in this pull for an off by 1 error.

New device IDs
==============

For these at most an ID and a instance of chip specific data was needed.
Always nice to see manufacturers sticking to an existing software interface
for new parts.

allwinner,sun20i
- Add support for h616.
invensense,mpu6050
- Add support for ICM42688
maxim,max30102
- Add compatible for MAX30101
ti,dac5571
- Add compatible for DAC081C081

General
=======

fwnode_handle
- Support for cleanup.h based __free(fwnode_handle)
- Loop macro using this for looping over child nodes without needing to
call fwnode_handle_put() in ever early exit from the loop.
- Used in:
* adi,ad3552r
* adi,ad4130
* adi,ad5770r
* adi,ad74413r
* adi,ad7173
* adi,adfm2000
* linear,ltc2688
* linear,ltc2983
* maxim,max11410
* microchip,pac1934
* qcom,spmi-adc
* renesas,rz2gl
* st,ab8500
* st,stm32 (Fix for failure to set return value precedes this patch,
providing an example of why enabling direct returns makes bugs
less likely)
- Conversions to fwnode also using the cleanup logic
* adi,ad7124
* adi,ad7292
* freescale,fsl-imx25-gcq

- Other conversions to fwnode where the new cleanup handling isn't useful
* adi,ad7192
* avia,hx711
* freescale,mma8452
* nxp,fxls8962af
* st,spear
* ti,twl4030

Features
========

adi,adxl345
- Support SPI_3WIRE mode.

adi,ad9944
- Support 3-wire mode, note this isn't normal 3-wire SPI (unlike the
adxl345 change above), but rather a wiring scheme where the SPI
chip select is used to trigger conversions rather than using a
separate pin.
- Add some device specific documentation, mostly around the various wiring
schemes.

invensense,mpu6050
- Add Wake on Motion support as an IIO event and as a wake-up source.

linear,ltc2983
- Add vdd-supply.

ti,hdc3020
- Add power management using trigger on demand mode and adding suspend and
resume handling.
- Use reset GPIO if available.

Cleanup and fixes
================

iio core
- Use the various autocleanup and lock guards from cleanup.h to simplify
the IIO core.
- Don't set the pointer used for iio_priv() if it is zero sized as that
points beyond the end of the allocation. No driver actually uses it
in that case but good to clean this up.

various drivers
- Drop unnecessary casts of other pointer types to void *

docs
- Add missing ABI entry for in_temp_input.

adi,adx345
- General cleanup prior to adding spi-3wire mode.

adi,axi-adc
- Be more flexible and allow minor version changes as these are expected
to be backwards compatible.

avago,apds9300/9600
- Merge near identical bindings. The drivers are quite different, but
the bindings can be shared. The apds9306 binding introduced in this
series uses this shared binding doc as well.
- Add missing vdd-supply
- Update binding to use IRQ_TYPE_LEVEL_LOW instead of 8.

bosch,bmp280
- Organize headers

freescale,fxl-imx25-gcq
- Use devm_ for remaining probe() time setup allowing dropping
of specific error handling and remove() functions.

infineon,dps310
- Fix handling of negative temperatures
- Bring style of other similar calls inline with the form needed
for temperatures
- Ensure error handling of regmap calls is consistent within the driver.
- Simplify scale reading logic.

invensense,mpu6050
- Flip logic in binding to exclude devices without i2c-gate instead
of opting in. The list is expected to be much shorter as all recent
devices support this feature.

honeywell,hsc030pa
- Use spi_read() instead of opening coding.

renesas,rcar
- Use device_for_each_child_of_node_scoped() to remove need to manually
release. Left over from series the rest of which went in during 6.9.

st,ab8500
- Fix naming of function parameters in kernel-doc

* tag 'iio-for-6.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (108 commits)
iio: adc: ti-ads131e08: Use device_for_each_child_node_scoped() to simplify error paths.
iio: adc: adi-axi-adc: only error out in major version mismatch
iio: dac: support the ad9739a RF DAC
iio: dac: add support for AXI DAC IP core
iio: backend: add new functionality
dt-bindings: iio: dac: add docs for AD9739A
dt-bindings: iio: dac: add docs for AXI DAC IP
iio: buffer-dmaengine: Enable write support
iio: buffer-dmaengine: Support specifying buffer direction
iio: buffer-dma: Enable buffer write support
iio: buffer-dma: Rename iio_dma_buffer_data_available()
iio: buffer-dma: add iio_dmaengine_buffer_setup()
iio: pressure: dps310: simplify scale factor reading
iio: pressure: dps310: consistently check return value of `regmap_read`
iio: pressure: dps310: introduce consistent error handling
iio: pressure: dps310: support negative temperature values
dt-bindings: iio: adc: Add GPADC for Allwinner H616
iio: dac: ad5755: make use of of_device_id table
iio: imu: inv_icm42600: add support of ICM-42688-P
dt-bindings: iio: imu: add icm42688 inside inv_icm42600
...

show more ...

dt-bindings: iio: imu: add icm42688 inside inv_icm42600

Add bindings for ICM-42688-P chip.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Acked-by: Krzysztof Kozlowski <krzy

dt-bindings: iio: imu: add icm42688 inside inv_icm42600

Add bindings for ICM-42688-P chip.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240408090720.847107-2-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get latest upstream.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.3-rc1 and sync with the other DRM trees.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next

To pick up perf-tools fixes just merged upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>