1What: /sys/class/hwmon/hwmonX/name 2Description: 3 The chip name. 4 This should be a short, lowercase string, not containing 5 whitespace, dashes, or the wildcard character '*'. 6 This attribute represents the chip name. It is the only 7 mandatory attribute. 8 I2C devices get this attribute created automatically. 9 10 RO 11 12What: /sys/class/hwmon/hwmonX/label 13Description: 14 A descriptive label that allows to uniquely identify a 15 device within the system. 16 The contents of the label are free-form. 17 18 RO 19 20What: /sys/class/hwmon/hwmonX/update_interval 21Description: 22 The interval at which the chip will update readings. 23 Unit: millisecond 24 25 RW 26 27 Some devices have a variable update rate or interval. 28 This attribute can be used to change it to the desired value. 29 30What: /sys/class/hwmon/hwmonX/update_interval_us 31Description: 32 The interval at which the chip will update readings, 33 expressed in microseconds. 34 Unit: microsecond 35 36 RW 37 38 Some devices have a variable update rate or interval and 39 require finer-than-millisecond control. 40 This attribute can be used to change it to the desired value. 41 Drivers implementing this attribute should also implement 42 update_interval for millisecond-based userspace interfaces. 43 44What: /sys/class/hwmon/hwmonX/inY_min 45Description: 46 Voltage min value. 47 48 Unit: millivolt 49 50 RW 51 52What: /sys/class/hwmon/hwmonX/inY_lcrit 53Description: 54 Voltage critical min value. 55 56 Unit: millivolt 57 58 RW 59 60 If voltage drops to or below this limit, the system may 61 take drastic action such as power down or reset. At the very 62 least, it should report a fault. 63 64What: /sys/class/hwmon/hwmonX/inY_lemergency 65Description: 66 Voltage emergency min value. 67 68 Unit: millivolt 69 70 RW 71 72 If voltage drops to or below this limit, the system is 73 expected to take drastic action such as immediate power 74 down or reset. At the very least, it should report a fault. 75 76What: /sys/class/hwmon/hwmonX/inY_max 77Description: 78 Voltage max value. 79 80 Unit: millivolt 81 82 RW 83 84What: /sys/class/hwmon/hwmonX/inY_crit 85Description: 86 Voltage critical max value. 87 88 Unit: millivolt 89 90 RW 91 92 If voltage reaches or exceeds this limit, the system may 93 take drastic action such as power down or reset. At the very 94 least, it should report a fault. 95 96What: /sys/class/hwmon/hwmonX/inY_emergency 97Description: 98 Voltage emergency max value. 99 100 Unit: millivolt 101 102 RW 103 104 If voltage reaches or exceeds this limit, the system is expected 105 to take drastic action such as immediate power down or reset. 106 At the very least, it should report a fault. 107 108What: /sys/class/hwmon/hwmonX/inY_input 109Description: 110 Voltage input value. 111 112 Unit: millivolt 113 114 RO 115 116 Voltage measured on the chip pin. 117 118 Actual voltage depends on the scaling resistors on the 119 motherboard, as recommended in the chip datasheet. 120 121 This varies by chip and by motherboard. 122 Because of this variation, values are generally NOT scaled 123 by the chip driver, and must be done by the application. 124 However, some drivers (notably lm87 and via686a) 125 do scale, because of internal resistors built into a chip. 126 These drivers will output the actual voltage. Rule of 127 thumb: drivers should report the voltage values at the 128 "pins" of the chip. 129 130What: /sys/class/hwmon/hwmonX/inY_average 131Description: 132 Average voltage 133 134 Unit: millivolt 135 136 RO 137 138What: /sys/class/hwmon/hwmonX/inY_lowest 139Description: 140 Historical minimum voltage 141 142 Unit: millivolt 143 144 RO 145 146What: /sys/class/hwmon/hwmonX/inY_highest 147Description: 148 Historical maximum voltage 149 150 Unit: millivolt 151 152 RO 153 154What: /sys/class/hwmon/hwmonX/inY_reset_history 155Description: 156 Reset inX_lowest and inX_highest 157 158 WO 159 160What: /sys/class/hwmon/hwmonX/in_reset_history 161Description: 162 Reset inX_lowest and inX_highest for all sensors 163 164 WO 165 166What: /sys/class/hwmon/hwmonX/inY_label 167Description: 168 Suggested voltage channel label. 169 170 Text string 171 172 Should only be created if the driver has hints about what 173 this voltage channel is being used for, and user-space 174 doesn't. In all other cases, the label is provided by 175 user-space. 176 177 RO 178 179What: /sys/class/hwmon/hwmonX/inY_enable 180Description: 181 Enable or disable the sensors. 182 183 When disabled the sensor read will return -ENODATA. 184 185 - 1: Enable 186 - 0: Disable 187 188 RW 189 190What: /sys/class/hwmon/hwmonX/inY_fault 191Description: 192 Reports a voltage hard failure (eg: shorted component) 193 194 - 1: Failed 195 - 0: Ok 196 197 RO 198 199What: /sys/class/hwmon/hwmonX/cpuY_vid 200Description: 201 CPU core reference voltage. 202 203 Unit: millivolt 204 205 RO 206 207 Not always correct. 208 209What: /sys/class/hwmon/hwmonX/vrm 210Description: 211 Voltage Regulator Module version number. 212 213 RW (but changing it should no more be necessary) 214 215 Originally the VRM standard version multiplied by 10, but now 216 an arbitrary number, as not all standards have a version 217 number. 218 219 Affects the way the driver calculates the CPU core reference 220 voltage from the vid pins. 221 222What: /sys/class/hwmon/hwmonX/inY_rated_min 223Description: 224 Minimum rated voltage. 225 226 Unit: millivolt 227 228 RO 229 230What: /sys/class/hwmon/hwmonX/inY_rated_max 231Description: 232 Maximum rated voltage. 233 234 Unit: millivolt 235 236 RO 237 238What: /sys/class/hwmon/hwmonX/fanY_min 239Description: 240 Fan minimum value 241 242 Unit: revolution/min (RPM) 243 244 RW 245 246What: /sys/class/hwmon/hwmonX/fanY_max 247Description: 248 Fan maximum value 249 250 Unit: revolution/min (RPM) 251 252 Only rarely supported by the hardware. 253 RW 254 255What: /sys/class/hwmon/hwmonX/fanY_input 256Description: 257 Fan input value. 258 259 Unit: revolution/min (RPM) 260 261 RO 262 263What: /sys/class/hwmon/hwmonX/fanY_div 264Description: 265 Fan divisor. 266 267 Integer value in powers of two (1, 2, 4, 8, 16, 32, 64, 128). 268 269 RW 270 271 Some chips only support values 1, 2, 4 and 8. 272 Note that this is actually an internal clock divisor, which 273 affects the measurable speed range, not the read value. 274 275What: /sys/class/hwmon/hwmonX/fanY_pulses 276Description: 277 Number of tachometer pulses per fan revolution. 278 279 Integer value, typically between 1 and 4. 280 281 RW 282 283 This value is a characteristic of the fan connected to the 284 device's input, so it has to be set in accordance with the fan 285 model. 286 287 Should only be created if the chip has a register to configure 288 the number of pulses. In the absence of such a register (and 289 thus attribute) the value assumed by all devices is 2 pulses 290 per fan revolution. 291 292What: /sys/class/hwmon/hwmonX/fanY_target 293Description: 294 Desired fan speed 295 296 Unit: revolution/min (RPM) 297 298 RW 299 300 Only makes sense if the chip supports closed-loop fan speed 301 control based on the measured fan speed. 302 303What: /sys/class/hwmon/hwmonX/fanY_label 304Description: 305 Suggested fan channel label. 306 307 Text string 308 309 Should only be created if the driver has hints about what 310 this fan channel is being used for, and user-space doesn't. 311 In all other cases, the label is provided by user-space. 312 313 RO 314 315What: /sys/class/hwmon/hwmonX/fanY_enable 316Description: 317 Enable or disable the sensors. 318 319 When disabled the sensor read will return -ENODATA. 320 321 - 1: Enable 322 - 0: Disable 323 324 RW 325 326What: /sys/class/hwmon/hwmonX/fanY_fault 327Description: 328 Reports if a fan has reported failure. 329 330 - 1: Failed 331 - 0: Ok 332 333 RO 334 335What: /sys/class/hwmon/hwmonX/pwmY 336Description: 337 Pulse width modulation fan control. 338 339 Integer value in the range 0 to 255 340 341 RW 342 343 255 is max or 100%. 344 345What: /sys/class/hwmon/hwmonX/pwmY_enable 346Description: 347 Fan speed control method: 348 349 - 0: no fan speed control (i.e. fan at full speed) 350 - 1: manual fan speed control enabled (using `pwmY`) 351 - 2+: automatic fan speed control enabled 352 353 Check individual chip documentation files for automatic mode 354 details. 355 356 RW 357 358What: /sys/class/hwmon/hwmonX/pwmY_mode 359Description: 360 - 0: DC mode (direct current) 361 - 1: PWM mode (pulse-width modulation) 362 363 RW 364 365What: /sys/class/hwmon/hwmonX/pwmY_freq 366Description: 367 Base PWM frequency in Hz. 368 369 Only possibly available when pwmN_mode is PWM, but not always 370 present even then. 371 372 RW 373 374What: /sys/class/hwmon/hwmonX/pwmY_auto_channels_temp 375Description: 376 Select which temperature channels affect this PWM output in 377 auto mode. 378 379 Bitfield, 1 is temp1, 2 is temp2, 4 is temp3 etc... 380 Which values are possible depend on the chip used. 381 382 RW 383 384What: /sys/class/hwmon/hwmonX/pwmY_auto_pointZ_pwm 385What: /sys/class/hwmon/hwmonX/pwmY_auto_pointZ_temp 386What: /sys/class/hwmon/hwmonX/pwmY_auto_pointZ_temp_hyst 387Description: 388 Define the PWM vs temperature curve. 389 390 Number of trip points is chip-dependent. Use this for chips 391 which associate trip points to PWM output channels. 392 393 RW 394 395What: /sys/class/hwmon/hwmonX/tempY_auto_pointZ_pwm 396What: /sys/class/hwmon/hwmonX/tempY_auto_pointZ_temp 397What: /sys/class/hwmon/hwmonX/tempY_auto_pointZ_temp_hyst 398Description: 399 Define the PWM vs temperature curve. 400 401 Number of trip points is chip-dependent. Use this for chips 402 which associate trip points to temperature channels. 403 404 RW 405 406What: /sys/class/hwmon/hwmonX/tempY_type 407Description: 408 Sensor type selection. 409 410 Integers 1 to 6 411 412 RW 413 414 - 1: CPU embedded diode 415 - 2: 3904 transistor 416 - 3: thermal diode 417 - 4: thermistor 418 - 5: AMD AMDSI 419 - 6: Intel PECI 420 421 Not all types are supported by all chips 422 423What: /sys/class/hwmon/hwmonX/tempY_max 424Description: 425 Temperature max value. 426 427 Unit: millidegree Celsius (or millivolt, see below) 428 429 RW 430 431What: /sys/class/hwmon/hwmonX/tempY_max_alarm 432Description: 433 Maximum temperature alarm flag. 434 435 - 0: OK 436 - 1: temperature has reached tempY_max 437 438 RO 439 440What: /sys/class/hwmon/hwmonX/tempY_min 441Description: 442 Temperature min value. 443 444 Unit: millidegree Celsius 445 446 RW 447 448What: /sys/class/hwmon/hwmonX/tempY_min_alarm 449Description: 450 Minimum temperature alarm flag. 451 452 - 0: OK 453 - 1: temperature has reached tempY_min 454 455 RO 456 457What: /sys/class/hwmon/hwmonX/tempY_max_hyst 458Description: 459 Temperature hysteresis value for max limit. 460 461 Unit: millidegree Celsius 462 463 Must be reported as an absolute temperature, NOT a delta 464 from the max value. 465 466 RW 467 468What: /sys/class/hwmon/hwmonX/tempY_min_hyst 469Description: 470 Temperature hysteresis value for min limit. 471 Unit: millidegree Celsius 472 473 Must be reported as an absolute temperature, NOT a delta 474 from the min value. 475 476 RW 477 478What: /sys/class/hwmon/hwmonX/tempY_input 479Description: 480 Temperature input value. 481 482 Unit: millidegree Celsius 483 484 RO 485 486What: /sys/class/hwmon/hwmonX/tempY_crit 487Description: 488 Temperature critical max value, typically greater than 489 corresponding temp_max values. 490 491 Unit: millidegree Celsius 492 493 RW 494 495What: /sys/class/hwmon/hwmonX/tempY_crit_alarm 496Description: 497 Critical high temperature alarm flag. 498 499 - 0: OK 500 - 1: temperature has reached tempY_crit 501 502 RO 503 504What: /sys/class/hwmon/hwmonX/tempY_crit_hyst 505Description: 506 Temperature hysteresis value for critical limit. 507 508 Unit: millidegree Celsius 509 510 Must be reported as an absolute temperature, NOT a delta 511 from the critical value. 512 513 RW 514 515What: /sys/class/hwmon/hwmonX/tempY_emergency 516Description: 517 Temperature emergency max value, for chips supporting more than 518 two upper temperature limits. Must be equal or greater than 519 corresponding temp_crit values. 520 521 Unit: millidegree Celsius 522 523 RW 524 525What: /sys/class/hwmon/hwmonX/tempY_emergency_alarm 526Description: 527 Emergency high temperature alarm flag. 528 529 - 0: OK 530 - 1: temperature has reached tempY_emergency 531 532 RO 533 534What: /sys/class/hwmon/hwmonX/tempY_emergency_hyst 535Description: 536 Temperature hysteresis value for emergency limit. 537 538 Unit: millidegree Celsius 539 540 Must be reported as an absolute temperature, NOT a delta 541 from the emergency value. 542 543 RW 544 545What: /sys/class/hwmon/hwmonX/tempY_lcrit 546Description: 547 Temperature critical min value, typically lower than 548 corresponding temp_min values. 549 550 Unit: millidegree Celsius 551 552 RW 553 554What: /sys/class/hwmon/hwmonX/tempY_lcrit_hyst 555Description: 556 Temperature hysteresis value for critical min limit. 557 558 Unit: millidegree Celsius 559 560 Must be reported as an absolute temperature, NOT a delta 561 from the critical min value. 562 563 RW 564 565What: /sys/class/hwmon/hwmonX/tempY_offset 566Description: 567 Temperature offset which is added to the temperature reading 568 by the chip. 569 570 Unit: millidegree Celsius 571 572 Read/Write value. 573 574What: /sys/class/hwmon/hwmonX/tempY_label 575Description: 576 Suggested temperature channel label. 577 578 Text string 579 580 Should only be created if the driver has hints about what 581 this temperature channel is being used for, and user-space 582 doesn't. In all other cases, the label is provided by 583 user-space. 584 585 RO 586 587What: /sys/class/hwmon/hwmonX/tempY_lowest 588Description: 589 Historical minimum temperature 590 591 Unit: millidegree Celsius 592 593 RO 594 595What: /sys/class/hwmon/hwmonX/tempY_highest 596Description: 597 Historical maximum temperature 598 599 Unit: millidegree Celsius 600 601 RO 602 603What: /sys/class/hwmon/hwmonX/tempY_reset_history 604Description: 605 Reset temp_lowest and temp_highest 606 607 WO 608 609What: /sys/class/hwmon/hwmonX/temp_reset_history 610Description: 611 Reset temp_lowest and temp_highest for all sensors 612 613 WO 614 615What: /sys/class/hwmon/hwmonX/tempY_enable 616Description: 617 Enable or disable the sensors. 618 619 When disabled the sensor read will return -ENODATA. 620 621 - 1: Enable 622 - 0: Disable 623 624 RW 625 626What: /sys/class/hwmon/hwmonX/tempY_rated_min 627Description: 628 Minimum rated temperature. 629 630 Unit: millidegree Celsius 631 632 RO 633 634What: /sys/class/hwmon/hwmonX/tempY_rated_max 635Description: 636 Maximum rated temperature. 637 638 Unit: millidegree Celsius 639 640 RO 641 642What: /sys/class/hwmon/hwmonX/currY_max 643Description: 644 Current max value 645 646 Unit: milliampere 647 648 RW 649 650What: /sys/class/hwmon/hwmonX/currY_min 651Description: 652 Current min value. 653 654 Unit: milliampere 655 656 RW 657 658What: /sys/class/hwmon/hwmonX/currY_lcrit 659Description: 660 Current critical low value 661 662 Unit: milliampere 663 664 RW 665 666What: /sys/class/hwmon/hwmonX/currY_crit 667Description: 668 Current critical high value. 669 670 Unit: milliampere 671 672 RW 673 674What: /sys/class/hwmon/hwmonX/currY_emergency 675Description: 676 Current emergency high value. 677 678 Unit: milliampere 679 680 RW 681 682 If a current reaches or exceeds this limit, the system is 683 expected to take drastic action such as immediate power down 684 or reset. At the very least, it should report a fault. 685 686What: /sys/class/hwmon/hwmonX/currY_input 687Description: 688 Current input value 689 690 Unit: milliampere 691 692 RO 693 694What: /sys/class/hwmon/hwmonX/currY_average 695Description: 696 Average current use 697 698 Unit: milliampere 699 700 RO 701 702What: /sys/class/hwmon/hwmonX/currY_lowest 703Description: 704 Historical minimum current 705 706 Unit: milliampere 707 708 RO 709 710What: /sys/class/hwmon/hwmonX/currY_highest 711Description: 712 Historical maximum current 713 Unit: milliampere 714 RO 715 716What: /sys/class/hwmon/hwmonX/currY_reset_history 717Description: 718 Reset currX_lowest and currX_highest 719 720 WO 721 722What: /sys/class/hwmon/hwmonX/curr_reset_history 723Description: 724 Reset currX_lowest and currX_highest for all sensors 725 726 WO 727 728What: /sys/class/hwmon/hwmonX/currY_enable 729Description: 730 Enable or disable the sensors. 731 732 When disabled the sensor read will return -ENODATA. 733 734 - 1: Enable 735 - 0: Disable 736 737 RW 738 739What: /sys/class/hwmon/hwmonX/currY_rated_min 740Description: 741 Minimum rated current. 742 743 Unit: milliampere 744 745 RO 746 747What: /sys/class/hwmon/hwmonX/currY_rated_max 748Description: 749 Maximum rated current. 750 751 Unit: milliampere 752 753 RO 754 755What: /sys/class/hwmon/hwmonX/powerY_average 756Description: 757 Average power use 758 759 Unit: microWatt 760 761 RO 762 763What: /sys/class/hwmon/hwmonX/powerY_average_interval 764Description: 765 Power use averaging interval. A poll 766 notification is sent to this file if the 767 hardware changes the averaging interval. 768 769 Unit: milliseconds 770 771 RW 772 773What: /sys/class/hwmon/hwmonX/powerY_average_interval_max 774Description: 775 Maximum power use averaging interval 776 777 Unit: milliseconds 778 779 RO 780 781What: /sys/class/hwmon/hwmonX/powerY_average_interval_min 782Description: 783 Minimum power use averaging interval 784 785 Unit: milliseconds 786 787 RO 788 789What: /sys/class/hwmon/hwmonX/powerY_average_highest 790Description: 791 Historical average maximum power use 792 793 Unit: microWatt 794 795 RO 796 797What: /sys/class/hwmon/hwmonX/powerY_average_lowest 798Description: 799 Historical average minimum power use 800 801 Unit: microWatt 802 803 RO 804 805What: /sys/class/hwmon/hwmonX/powerY_average_max 806Description: 807 A poll notification is sent to 808 `powerY_average` when power use 809 rises above this value. 810 811 Unit: microWatt 812 813 RW 814 815What: /sys/class/hwmon/hwmonX/powerY_average_min 816Description: 817 A poll notification is sent to 818 `powerY_average` when power use 819 sinks below this value. 820 821 Unit: microWatt 822 823 RW 824 825What: /sys/class/hwmon/hwmonX/powerY_input 826Description: 827 Instantaneous power use 828 829 Unit: microWatt 830 831 RO 832 833What: /sys/class/hwmon/hwmonX/powerY_input_highest 834Description: 835 Historical maximum power use 836 837 Unit: microWatt 838 839 RO 840 841What: /sys/class/hwmon/hwmonX/powerY_input_lowest 842Description: 843 Historical minimum power use 844 845 Unit: microWatt 846 847 RO 848 849What: /sys/class/hwmon/hwmonX/powerY_reset_history 850Description: 851 Reset input_highest, input_lowest, 852 average_highest and average_lowest. 853 854 WO 855 856What: /sys/class/hwmon/hwmonX/powerY_accuracy 857Description: 858 Accuracy of the power meter. 859 860 Unit: Percent 861 862 RO 863 864What: /sys/class/hwmon/hwmonX/powerY_cap 865Description: 866 If power use rises above this limit, the 867 system should take action to reduce power use. 868 A poll notification is sent to this file if the 869 cap is changed by the hardware. The `*_cap` 870 files only appear if the cap is known to be 871 enforced by hardware. 872 873 Unit: microWatt 874 875 RW 876 877What: /sys/class/hwmon/hwmonX/powerY_cap_hyst 878Description: 879 Margin of hysteresis built around capping and 880 notification. 881 882 Unit: microWatt 883 884 RW 885 886What: /sys/class/hwmon/hwmonX/powerY_cap_max 887Description: 888 Maximum cap that can be set. 889 890 Unit: microWatt 891 892 RO 893 894What: /sys/class/hwmon/hwmonX/powerY_cap_min 895Description: 896 Minimum cap that can be set. 897 898 Unit: microWatt 899 900 RO 901 902What: /sys/class/hwmon/hwmonX/powerY_max 903Description: 904 Maximum power. 905 906 Unit: microWatt 907 908 RW 909 910What: /sys/class/hwmon/hwmonX/powerY_crit 911Description: 912 Critical maximum power. 913 914 If power rises to or above this limit, the 915 system is expected take drastic action to reduce 916 power consumption, such as a system shutdown or 917 a forced powerdown of some devices. 918 919 Unit: microWatt 920 921 RW 922 923What: /sys/class/hwmon/hwmonX/powerY_enable 924Description: 925 Enable or disable the sensors. 926 927 When disabled the sensor read will return 928 -ENODATA. 929 930 - 1: Enable 931 - 0: Disable 932 933 RW 934 935What: /sys/class/hwmon/hwmonX/powerY_rated_min 936Description: 937 Minimum rated power. 938 939 Unit: microWatt 940 941 RO 942 943What: /sys/class/hwmon/hwmonX/powerY_rated_max 944Description: 945 Maximum rated power. 946 947 Unit: microWatt 948 949 RO 950 951What: /sys/class/hwmon/hwmonX/energyY_input 952Description: 953 Cumulative energy use 954 955 Unit: microJoule 956 957 RO 958 959What: /sys/class/hwmon/hwmonX/energyY_enable 960Description: 961 Enable or disable the sensors. 962 963 When disabled the sensor read will return 964 -ENODATA. 965 966 - 1: Enable 967 - 0: Disable 968 969 RW 970 971What: /sys/class/hwmon/hwmonX/humidityY_alarm 972Description: 973 Humidity limit detection 974 975 - 0: OK 976 - 1: Humidity limit has been reached 977 978 RO 979 980What: /sys/class/hwmon/hwmonX/humidityY_enable 981Description: 982 Enable or disable the sensors 983 984 When disabled the sensor read will return 985 -ENODATA. 986 987 - 1: Enable 988 - 0: Disable 989 990 RW 991 992What: /sys/class/hwmon/hwmonX/humidityY_fault 993Description: 994 Reports a humidity sensor failure. 995 996 - 1: Failed 997 - 0: Ok 998 999 RO 1000 1001What: /sys/class/hwmon/hwmonX/humidityY_input 1002Description: 1003 Humidity 1004 1005 Unit: milli-percent (per cent mille, pcm) 1006 1007 RO 1008 1009What: /sys/class/hwmon/hwmonX/humidityY_label 1010Description: 1011 Suggested humidity channel label. 1012 1013 Text string 1014 1015 Should only be created if the driver has hints about what 1016 this humidity channel is being used for, and user-space 1017 doesn't. In all other cases, the label is provided by 1018 user-space. 1019 1020 RO 1021 1022What: /sys/class/hwmon/hwmonX/humidityY_max 1023Description: 1024 Humidity max value. 1025 1026 Unit: milli-percent (per cent mille, pcm) 1027 1028 RW 1029 1030What: /sys/class/hwmon/hwmonX/humidityY_max_alarm 1031Description: 1032 Maximum humidity detection 1033 1034 - 0: OK 1035 - 1: Maximum humidity detected 1036 1037 RO 1038 1039What: /sys/class/hwmon/hwmonX/humidityY_max_hyst 1040Description: 1041 Humidity hysteresis value for max limit. 1042 1043 Unit: milli-percent (per cent mille, pcm) 1044 1045 Must be reported as an absolute humidity, NOT a delta 1046 from the max value. 1047 1048 RW 1049 1050What: /sys/class/hwmon/hwmonX/humidityY_min 1051Description: 1052 Humidity min value. 1053 1054 Unit: milli-percent (per cent mille, pcm) 1055 1056 RW 1057 1058What: /sys/class/hwmon/hwmonX/humidityY_min_alarm 1059Description: 1060 Minimum humidity detection 1061 1062 - 0: OK 1063 - 1: Minimum humidity detected 1064 1065 RO 1066 1067What: /sys/class/hwmon/hwmonX/humidityY_min_hyst 1068Description: 1069 Humidity hysteresis value for min limit. 1070 1071 Unit: milli-percent (per cent mille, pcm) 1072 1073 Must be reported as an absolute humidity, NOT a delta 1074 from the min value. 1075 1076 RW 1077 1078What: /sys/class/hwmon/hwmonX/humidityY_rated_min 1079Description: 1080 Minimum rated humidity. 1081 1082 Unit: milli-percent (per cent mille, pcm) 1083 1084 RO 1085 1086What: /sys/class/hwmon/hwmonX/humidityY_rated_max 1087Description: 1088 Maximum rated humidity. 1089 1090 Unit: milli-percent (per cent mille, pcm) 1091 1092 RO 1093 1094 1095What: /sys/class/hwmon/hwmonX/intrusionY_alarm 1096Description: 1097 Chassis intrusion detection 1098 1099 - 0: OK 1100 - 1: intrusion detected 1101 1102 RW 1103 1104 Contrary to regular alarm flags which clear themselves 1105 automatically when read, this one sticks until cleared by 1106 the user. This is done by writing 0 to the file. Writing 1107 other values is unsupported. 1108 1109What: /sys/class/hwmon/hwmonX/intrusionY_beep 1110Description: 1111 Chassis intrusion beep 1112 1113 - 0: disable 1114 - 1: enable 1115 1116 RW 1117 1118What: /sys/class/hwmon/hwmonX/device/pec 1119Description: 1120 PEC support on I2C devices 1121 1122 - 0, off, n: disable 1123 - 1, on, y: enable 1124 1125 RW 1126