| /freebsd/sys/contrib/device-tree/Bindings/dma/ |
| H A D | snps,dw-axi-dmac.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Synopsys DesignWare AXI DMA Controller
10 - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
13 Synopsys DesignWare AXI DMA Controller DT Binding
16 - $ref: dma-controller.yaml#
21 - snps,axi-dma-1.01a
22 - intel,kmb-axi-dma
[all …]
|
| H A D | snps,dw-axi-dmac.txt | 1 Synopsys DesignWare AXI DMA Controller
4 - compatible: "snps,axi-dma-1.01a"
5 - reg: Address range of the DMAC registers. This should include
6 all of the per-channel registers.
7 - interrupt: Should contain the DMAC interrupt number.
8 - dma-channels: Number of channels supported by hardware.
9 - snps,dma-masters: Number of AXI masters supported by the hardware.
10 - snps,data-width: Maximum AXI data width supported by hardware.
11 (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
12 - snps,priority: Priority of channel. Array size is equal to the number of
[all …]
|
| H A D | adi,axi-dmac.txt | 1 Analog Devices AXI-DMAC DMA controller
4 - compatible: Must be "adi,axi-dmac-1.00.a".
5 - reg: Specification for the controllers memory mapped register map.
6 - interrupts: Specification for the controllers interrupt.
7 - clocks: Phandle and specifier to the controllers AXI interface clock
8 - #dma-cells: Must be 1.
10 Required sub-nodes:
11 - adi,channels: This sub-node must contain a sub-node for each DMA channel. For
12 the channel sub-nodes the following bindings apply. They must match the
15 Required properties for adi,channels sub-node:
[all …]
|
| H A D | milbeaut-m10v-xdmac.txt | 1 * Milbeaut AXI DMA Controller
3 Milbeaut AXI DMA controller has only memory to memory transfer capability.
5 * DMA controller
8 - compatible: Should be "socionext,milbeaut-m10v-xdmac"
9 - reg: Should contain DMA registers location and length.
10 - interrupts: Should contain all of the per-channel DMA interrupts.
11 Number of channels is configurable - 2, 4 or 8, so
13 - #dma-cells: Should be 1.
16 xdmac0: dma-controller@1c250000 {
17 compatible = "socionext,milbeaut-m10v-xdmac";
[all …]
|
| H A D | renesas,nbpfaxi.txt | 1 * Renesas "Type-AXI" NBPFAXI* DMA controllers
3 * DMA controller
7 - compatible: must be one of
17 - #dma-cells: must be 2: the first integer is a terminal number, to which this
21 #define NBPF_SLAVE_RQ_HIGH 1
26 - max-burst-mem-read: limit burst size for memory reads
29 - max-burst-mem-write: limit burst size for memory writes
32 If both max-burst-mem-read and max-burst-mem-write are set, DMA_MEM_TO_MEM
35 You can use dma-channels and dma-requests as described in dma.txt, although they
40 dma: dma-controller@48000000 {
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/dma/xilinx/ |
| H A D | xilinx_dma.txt | 1 Xilinx AXI VDMA engine, it does transfers between memory and video devices.
6 Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
11 Xilinx AXI CDMA engine, it does transfers between memory-mapped source
12 address and a memory-mapped destination address.
14 Xilinx AXI MCDMA engine, it does transfer between memory and AXI4 stream
19 - compatible: Should be one of-
20 "xlnx,axi
[all...] |
| H A D | xlnx,zynqmp-dpdma.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Xilinx ZynqMP DisplayPort DMA Controller
10 These bindings describe the DMA engine included in the Xilinx ZynqMP
11 DisplayPort Subsystem. The DMA engine supports up to 6 DMA channels (3
12 channels for a video stream, 1 channel for a graphics stream, and 2 channels
16 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
19 - $ref: ../dma-controller.yaml#
[all …]
|
| H A D | xlnx,zynqmp-dma-1.0.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/dma/xilin
[all...] |
| /freebsd/sys/contrib/device-tree/Bindings/net/ |
| H A D | xlnx,axi-ethernet.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/net/xlnx,axi
[all...] |
| H A D | xilinx_axienet.txt | 1 XILINX AXI ETHERNET Device Tree Bindings
2 --------------------------------------------------------
4 Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
10 Management configuration is done through the AXI interface, while payload is
11 sent and received through means of an AXI DMA controller. This driver
12 includes the DMA driver code, so this driver is incompatible with AXI DMA
18 - compatible : Must be one of "xlnx,axi-ethernet-1.00.a",
19 "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a"
20 - reg : Address and length of the IO space, as well as the address
21 and length of the AXI DMA controller IO space, unless
[all …]
|
| H A D | snps,dwc-qos-ethernet.txt | 13 - compatible: One of:
14 - "axis,artpec6-eqos", "snps,dwc-qos-ethernet-4.10"
15 Represents the IP core when integrated into the Axis ARTPEC-6 SoC.
16 - "nvidia,tegra186-eqos", "snps,dwc-qo
[all...] |
| H A D | snps,dwmac.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Alexandre Torgue <alexandre.torgue@foss.st.com>
11 - Giuseppe Cavallaro <peppe.cavallaro@st.com>
12 - Jos
[all...] |
| /freebsd/sys/contrib/device-tree/Bindings/sound/ |
| H A D | adi,axi-i2s.txt | 1 ADI AXI-I2S controller
7 - compatible : Must be "adi,axi-i2s-1.00.a"
8 - reg : Must contain I2S core's registers location and length
9 - clocks : Pairs of phandle and specifier referencing the controller's clocks.
10 The controller expects two clocks, the clock used for the AXI interface and
12 - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample
14 - dmas: Pairs of phandle and specifier for the DMA channels that are used by
15 the core. The core expects two dma channels if both transmit and receive are
17 - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
19 For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/iio/adc/ |
| H A D | adi,axi-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Analog Devices AXI ADC IP core
10 - Michael Hennerich <michael.hennerich@analog.com>
13 Analog Devices Generic AXI ADC IP core for interfacing an ADC device
18 to the data-lines of the ADC and handle the streaming of data into
19 memory via DMA.
26 - adi,axi-adc-10.0.a
[all …]
|
| /freebsd/sys/contrib/alpine-hal/ |
| H A D | al_hal_udma_regs_s2m.h | 1 /*-
10 found at http://www.gnu.org/licenses/gpl-2.0.html
77 /* [0x24] AXI outstanding read configuration */
79 /* [0x28] AXI outstanding write configuration */
85 * [0x0] DMA state
86 * 00 - No pending tasks
92 /* [0x4] CPU request to change DMA state */
96 * [0xc] S2M DMA error log mask.
98 * This register determines if these errors cause the S2M DMA to log the
100 * 0 - Log is enable
[all …]
|
| H A D | al_hal_udma_regs_m2s.h | 1 /*-
10 found at http://www.gnu.org/licenses/gpl-2.0.html
77 /* [0x24] AXI outstanding configuration */
83 * [0x0] DMA state.
84 * 00 - No pending tasks
90 /* [0x4] CPU request to change DMA state */
94 * [0xc] M2S DMA error log mask.
96 * This register determines if these errors cause the M2S DMA to log the
98 * 0 - Log is enabled.
99 * 1 - Log is masked.
[all …]
|
| /freebsd/sys/riscv/conf/ |
| H A D | NOTES | 2 # NOTES -- Lines that can be cut/pasted into kernel and hints configs.
11 makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
12 makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support
23 # RISC-V SBI console
41 # NOTE: dtrace introduces CDDL-licensed components into the kernel
47 device uart_ns8250 # ns8250-type UART driver
55 device xae # Xilinx AXI Etherne
[all...] |
| /freebsd/sys/contrib/device-tree/Bindings/pci/ |
| H A D | snps,dw-pcie-common.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/snps,dw-pci
[all...] |
| H A D | brcm,iproc-pcie.txt | 4 - compatible:
5 "brcm,iproc-pcie" for the first generation of PAXB based controller,
7 "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
9 "brcm,iproc-pcie-paxc" for the first generation of PAXC based
11 "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
13 PAXB-based root complex is used for external endpoint devices. PAXC-based
15 - reg: base address and length of the PCIe controller I/O register space
16 - #interrupt-cells: set to <1>
17 - interrupt-map-mask and interrupt-map, standard PCI properties to define the
19 - linux,pci-domain: PCI domain ID. Should be unique for each host controller
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/bus/ |
| H A D | baikal,bt1-axi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/bus/baikal,bt1-axi.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Baikal-T1 AXI-bus
11 - Serge Semin <fancer.lancer@gmail.com>
14 AXI3-bus is the main communication bus of Baikal-T1 SoC connecting all
15 high-speed peripheral IP-cores with RAM controller and with MIPS P5600
16 cores. Traffic arbitration is done by means of DW AXI Interconnect (so
17 called AXI Main Interconnect) routing IO requests from one block to
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/ata/ |
| H A D | snps,dwc-ahci-common.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Serge Semin <fancer.lancer@gmail.com>
19 - $ref: ahci-common.yaml#
23 maxItems: 1
26 maxItems: 1
30 Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock,
31 PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
[all …]
|
| H A D | baikal,bt1-ahci.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Baikal-T1 SoC AHCI SATA controller
10 - Serge Semin <fancer.lancer@gmail.com>
13 AHCI SATA controller embedded into the Baikal-T1 SoC is based on the
14 DWC AHCI SATA v4.10a IP-core.
17 - $ref: snps,dwc-ahci-common.yaml#
21 const: baikal,bt1-ahci
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arm/marvell/ |
| H A D | mmp2.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only
7 #include <dt-bindings/clock/marvell,mmp2.h>
8 #include <dt-bindings/power/marvell,mmp2.h>
9 #include <dt-bindings/clock/marvell,mmp2-audio.h>
12 #address-cells = <1>;
13 #size-cells = <1>;
25 #address-cells = <1>;
26 #size-cells = <1>;
27 compatible = "simple-bus";
28 interrupt-parent = <&intc>;
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arm/axis/ |
| H A D | artpec6.dtsi | 2 * Device Tree Source for the Axis ARTPEC-6 SoC
4 * This file is dual-licensed: you can use it either under the terms
43 #include <dt-bindings/interrupt-controller/arm-gic.h>
44 #include <dt-bindings/dma/nbpfaxi.h>
45 #include <dt-bindings/clock/axis,artpec6-clkctrl.h>
48 #address-cells = <1>;
49 #size-cells = <1>;
51 interrupt-parent = <&intc>;
54 #address-cells = <1>;
55 #size-cells = <0>;
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arm64/marvell/ |
| H A D | armada-cp11x.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/interrupt-controller/mvebu-icu.h>
9 #include <dt-bindings/thermal/thermal.h>
11 #include "armada-common.dtsi"
27 thermal-zones {
28 CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) {
29 polling-delay-passive = <0>; /* Interrupt driven */
30 polling-delay = <0>; /* Interrupt driven */
32 thermal-sensors = <&CP11X_LABEL(thermal) 0>;
42 cooling-maps { };
[all …]
|