| /linux/arch/arm64/boot/dts/ti/ |
| H A D | k3-am65-iot2050-arduino-connector.dtsi | 112 /* (P5) MCU_UART0_TXD */
119 /* (P5) WKUP_GPIO0_30 */
126 /* (P5) WKUP_GPIO0_30 */
133 /* (P5) WKUP_GPIO0_30 */
147 /* (P5) WKUP_GPIO0_31 */
154 /* (P5) WKUP_GPIO0_31 */
161 /* (P5) WKUP_GPIO0_31 */
|
| H A D | k3-am64-phycore-som.dtsi | 84 AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
|
| H A D | k3-am654-base-board.dts | 192 AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */
|
| H A D | k3-am642-sk.dts | 259 AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
|
| H A D | k3-am642-evm.dts | 315 AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
|
| H A D | k3-am642-tqma64xxl-mbax4xxl.dts | 594 /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
|
| /linux/drivers/iio/pressure/ |
| H A D | bmp280.h | 383 s16 P5; member
405 u16 P5; member
|
| H A D | bmp280-core.c | 127 enum { T1, T2, T3, P1, P2, P3, P4, P5, P6, P7, P8, P9 }; enumerator
342 calib->P5 = le16_to_cpu(data->bmp280_cal_buf[P5]); in bmp280_read_calib()
545 var2 += (var1 * (s64)calib->P5) << 17; in bmp280_compensate_press()
1548 offset = ((s64)calib->P5 << 47) + var4 + var5 + var6; in bmp380_compensate_press()
1635 calib->P5 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P5]); in bmp380_read_calib()
|
| /linux/arch/arm/boot/dts/marvell/ |
| H A D | armada-388-clearfog.dts | 72 * 10-JP4 P5
|
| H A D | armada-388-clearfog.dtsi | 126 * 10-JP4 P5
|
| /linux/drivers/pinctrl/aspeed/ |
| H A D | pinctrl-aspeed-g4.c | 1555 #define P5 191 macro
1556 SIG_EXPR_LIST_DECL_SINGLE(P5, GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
1557 SIG_EXPR_LIST_DECL_SINGLE(P5, ADC15, ADC15);
1558 PIN_DECL_(P5, SIG_EXPR_LIST_PTR(P5, GPIOX7), SIG_EXPR_LIST_PTR(P5, ADC15));
1559 FUNC_GROUP_DECL(ADC15, P5);
2082 ASPEED_PINCTRL_PIN(P5),
2522 ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_PULL_DOWN, P5, P5, SCUA8, 19),
2523 ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_DISABLE, P5, P5, SCUA8, 19),
|
| H A D | pinctrl-aspeed-g5.c | 784 #define P5 101 macro
786 SIG_EXPR_LIST_DECL_SINGLE(P5, VPIB7, VPI24, VPI_24_RSVD_DESC, P5_DESC, COND2);
787 SIG_EXPR_LIST_DECL_SINGLE(P5, NRTS2, NRTS2, P5_DESC, COND2);
788 PIN_DECL_2(P5, GPIOM5, VPIB7, NRTS2);
789 FUNC_GROUP_DECL(NRTS2, P5);
929 FUNC_GROUP_DECL(VPI24, T1, U2, P4, P3, Y1, AB2, AA1, Y2, AA2, P5, R5, T5, V3,
2075 ASPEED_PINCTRL_PIN(P5),
|
| /linux/arch/arm/boot/dts/intel/ixp/ |
| H A D | intel-ixp42x-linksys-wrv54g.dts | 228 * EthC connects to MII-P5 on the KS8995 bypassing
|
| /linux/arch/arm/boot/dts/samsung/ |
| H A D | exynos5420-peach-pit.dts | 106 regulator-name = "P5.0V_USB3CON0";
117 regulator-name = "P5.0V_USB3CON1";
|
| H A D | exynos5800-peach-pi.dts | 106 regulator-name = "P5.0V_USB3CON0";
117 regulator-name = "P5.0V_USB3CON1";
|
| H A D | exynos5250-snow-common.dtsi | 180 regulator-name = "P5.0V_USB3CON";
|
| /linux/arch/arm/boot/dts/ti/omap/ |
| H A D | dra72-evm-common.dtsi | 124 <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
|
| /linux/arch/arm/crypto/ |
| H A D | ghash-ce-core.S | 142 veor t2l, t2l, t2h @ t2 = (N) (P4 + P5) << 24
|
| /linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx95-toradex-smarc.dtsi | 834 fsl,pins = <IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2 0x51e>; /* SMARC P5 - GBE1_SDP */
|
| H A D | imx8mp-toradex-smarc.dtsi | 893 fsl,pins = <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x4>; /* SMARC P5 - GBE1_SDP */
|