| /linux/arch/microblaze/boot/dts/ |
| H A D | system.dts | 20 compatible = "xlnx,microblaze";
40 compatible = "xlnx,microblaze-7.10.d";
53 xlnx,addr-tag-bits = <0xf>;
54 xlnx,allow-dcache-wr = <0x1>;
55 xlnx,allow-icache-wr = <0x1>;
56 xlnx,area-optimized = <0x0>;
57 xlnx,cache-byte-size = <0x2000>;
58 xlnx,d-lmb = <0x1>;
59 xlnx,d-opb = <0x0>;
60 xlnx,d-plb = <0x1>;
[all …]
|
| /linux/Documentation/devicetree/bindings/soc/xilinx/ |
| H A D | xilinx.yaml | 28 - xlnx,zynq-cc108
29 - xlnx,zynq-zc702
30 - xlnx,zynq-zc706
31 - xlnx,zynq-zc770-xm010
32 - xlnx,zynq-zc770-xm011
33 - xlnx,zynq-zc770-xm012
34 - xlnx,zynq-zc770-xm013
35 - const: xlnx,zynq-7000
39 - const: xlnx,zynq-microzed
40 - const: xlnx,zynq-7000
[all …]
|
| /linux/drivers/staging/axis-fifo/ |
| H A D | axis-fifo.txt | 17 - compatible: Should be "xlnx,axi-fifo-mm-s-4.1"
22 - xlnx,axi-str-rxd-protocol: Should be "XIL_AXI_STREAM_ETH_DATA"
23 - xlnx,axi-str-rxd-tdata-width: Should be <0x20>
24 - xlnx,axi-str-txc-protocol: Should be "XIL_AXI_STREAM_ETH_CTRL"
25 - xlnx,axi-str-txc-tdata-width: Should be <0x20>
26 - xlnx,axi-str-txd-protocol: Should be "XIL_AXI_STREAM_ETH_DATA"
27 - xlnx,axi-str-txd-tdata-width: Should be <0x20>
28 - xlnx,axis-tdest-width: AXI-Stream TDEST width (ignored by the driver)
29 - xlnx,axis-tid-width: AXI-Stream TID width (ignored by the driver)
30 - xlnx,axis-tuser-width: AXI-Stream TUSER width (ignored by the driver)
[all …]
|
| /linux/arch/mips/boot/dts/xilfpga/ |
| H A D | nexys4ddr.dts | 31 compatible = "xlnx,xps-intc-1.00.a";
34 xlnx,kind-of-intr = <0x0>;
35 xlnx,num-intr-inputs = <0x6>;
43 compatible = "xlnx,xps-gpio-1.00.a";
46 xlnx,all-inputs = <0x0>;
47 xlnx,dout-default = <0x0>;
48 xlnx,gpio-width = <0x16>;
49 xlnx,interrupt-present = <0x0>;
50 xlnx,is-dual = <0x0>;
51 xlnx,tri-default = <0xffffffff>;
[all …]
|
| /linux/Documentation/devicetree/bindings/gpio/ |
| H A D | xlnx,gpio-xilinx.yaml | 4 $id: http://devicetree.org/schemas/gpio/xlnx,gpio-xilinx.yaml#
22 - xlnx,xps-gpio-1.00.a
50 xlnx,all-inputs:
54 xlnx,all-inputs-2:
58 xlnx,all-outputs:
62 xlnx,all-outputs-2:
66 xlnx,dout-default:
72 xlnx,dout-default-2:
78 xlnx,gpio-width:
85 xlnx,gpio2-width:
[all …]
|
| H A D | gpio-zynq.yaml | 15 - xlnx,zynq-gpio-1.0
16 - xlnx,zynqmp-gpio-1.0
17 - xlnx,versal-gpio-1.0
18 - xlnx,pmc-gpio-1.0
52 - xlnx,zynqmp-gpio-1.0
63 - xlnx,zynq-gpio-1.0
74 - xlnx,versal-gpio-1.0
85 - xlnx,pmc-gpio-1.0
108 compatible = "xlnx,zynq-gpio-1.0";
|
| /linux/Documentation/devicetree/bindings/dma/xilinx/ |
| H A D | xilinx_dma.txt | 20 "xlnx,axi-vdma-1.00.a"
21 "xlnx,axi-dma-1.00.a"
22 "xlnx,axi-cdma-1.00.a"
23 "xlnx,axi-mcdma-1.00.a"
26 - xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
45 - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
48 - xlnx,sg-length-width: Should be set to the width in bits of the length
54 - xlnx,axistream-connected: Tells whether DMA is connected to AXI stream IP.
55 - xlnx,irq-delay: Tells the interrupt delay timeout value. Valid range is from
59 - xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
[all …]
|
| /linux/Documentation/devicetree/bindings/firmware/xilinx/ |
| H A D | xlnx,zynqmp-firmware.yaml | 4 $id: http://devicetree.org/schemas/firmware/xilinx/xlnx,zynqmp-firmware.yaml#
24 const: xlnx,zynqmp-firmware
27 const: xlnx,versal-firmware
32 - xlnx,versal-net-firmware
33 - const: xlnx,versal-firmware
51 $ref: /schemas/clock/xlnx,versal-clk.yaml#
60 $ref: /schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
66 $ref: /schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
72 $ref: /schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml
79 $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
[all …]
|
| /linux/Documentation/devicetree/bindings/clock/ |
| H A D | xlnx,clocking-wizard.yaml | 4 $id: http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#
20 - xlnx,clocking-wizard
21 - xlnx,clocking-wizard-v5.2
22 - xlnx,clocking-wizard-v6.0
23 - xlnx,versal-clk-wizard
42 xlnx,static-config:
48 xlnx,speed-grade:
54 xlnx,nr-outputs:
67 - xlnx,speed-grade
68 - xlnx,nr-outputs
[all …]
|
| H A D | xlnx,versal-clk.yaml | 4 $id: http://devicetree.org/schemas/clock/xlnx,versal-clk.yaml#
21 - xlnx,versal-clk
22 - xlnx,zynqmp-clk
25 - xlnx,versal-net-clk
26 - const: xlnx,versal-clk
55 - xlnx,versal-clk
74 - xlnx,versal-net-clk
95 - xlnx,zynqmp-clk
127 compatible = "xlnx,zynqmp-firmware";
131 compatible = "xlnx,versal-clk";
[all …]
|
| /linux/Documentation/devicetree/bindings/remoteproc/ |
| H A D | xlnx,zynqmp-r5fss.yaml | 4 $id: http://devicetree.org/schemas/remoteproc/xlnx,zynqmp-r5fss.yaml#
22 - xlnx,zynqmp-r5fss
23 - xlnx,versal-r5fss
24 - xlnx,versal-net-r52fss
37 xlnx,cluster-mode:
54 xlnx,tcm-mode:
80 - xlnx,zynqmp-r5f
81 - xlnx,versal-r5f
82 - xlnx,versal-net-r52f
156 - xlnx,versal-net-r52fss
[all …]
|
| /linux/Documentation/devicetree/bindings/misc/ |
| H A D | xlnx,sd-fec.yaml | 4 $id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml#
23 const: xlnx,sd-fec-1.1
64 xlnx,sdfec-code:
75 xlnx,sdfec-din-width:
83 xlnx,sdfec-din-words:
92 xlnx,sdfec-dout-width:
99 xlnx,sdfec-dout-words:
113 - xlnx,sdfec-code
114 - xlnx,sdfec-din-width
115 - xlnx,sdfec-din-words
[all …]
|
| /linux/Documentation/devicetree/bindings/serial/ |
| H A D | xlnx,opb-uartlite.yaml | 4 $id: http://devicetree.org/schemas/serial/xlnx,opb-uartlite.yaml#
16 - xlnx,xps-uartlite-1.00.a
17 - xlnx,opb-uartlite-1.00.b
40 xlnx,data-bits:
45 xlnx,use-parity:
51 xlnx,odd-parity:
62 - xlnx,data-bits
63 - xlnx,use-parity
69 xlnx,use-parity:
73 - xlnx,odd-parity
[all …]
|
| /linux/Documentation/devicetree/bindings/sound/ |
| H A D | xlnx,i2s.txt | 6 - compatible: "xlnx,i2s-transmitter-1.0" for playback and
7 "xlnx,i2s-receiver-1.0" for capture
11 - xlnx,dwidth: sample data width. Can be any of 16, 24.
12 - xlnx,num-channels: Number of I2S streams. Can be any of 1, 2, 3, 4.
13 supported channels = 2 * xlnx,num-channels
18 compatible = "xlnx,i2s-receiver-1.0";
20 xlnx,dwidth = <0x18>;
21 xlnx,num-channels = <1>;
24 compatible = "xlnx,i2s-transmitter-1.0";
26 xlnx,dwidth = <0x18>;
[all …]
|
| /linux/Documentation/devicetree/bindings/media/xilinx/ |
| H A D | xlnx,v-tpg.txt | 8 "xlnx,v-tpg-5.0" (TPG version 5.0)
9 "xlnx,v-tpg-6.0" (TPG version 6.0)
18 - xlnx,video-format, xlnx,video-width: Video format and width, as defined in
26 - xlnx,vtc: A phandle referencing the Video Timing Controller that generates
33 The xlnx,vtc and timing-gpios properties are mandatory when the TPG is
39 compatible = "xlnx,v-tpg-6.0", "xlnx,v-tpg-5.0";
43 xlnx,vtc = <&vtc_3>;
53 xlnx,video-format = <XVIP_VF_YUV_422>;
54 xlnx,video-width = <8>;
63 xlnx,video-format = <XVIP_VF_YUV_422>;
[all …]
|
| H A D | xlnx,csi2rxss.yaml | 4 $id: http://devicetree.org/schemas/media/xilinx/xlnx,csi2rxss.yaml#
28 - xlnx,mipi-csi2-rx-subsystem-5.0
47 xlnx,csi-pxl-format:
75 xlnx,vfb:
79 xlnx,en-csi-v2-0:
83 xlnx,en-vcx:
88 xlnx,en-active-lanes:
152 - xlnx,vfb
155 - xlnx,csi-pxl-format
158 xlnx,csi-pxl-format: false
[all …]
|
| H A D | xlnx,v-tc.txt | 9 - compatible: Must be "xlnx,v-tc-6.1".
18 - xlnx,detector: The VTC has a timing detector
19 - xlnx,generator: The VTC has a timing generator
21 At least one of the xlnx,detector and xlnx,generator properties must be
28 compatible = "xlnx,v-tc-6.1";
32 xlnx,generator;
|
| /linux/Documentation/devicetree/bindings/mailbox/ |
| H A D | xlnx,zynqmp-ipi-mailbox.yaml | 4 $id: http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#
41 - xlnx,zynqmp-ipi-mailbox
42 - xlnx,versal-ipi-mailbox
69 xlnx,ipi-id:
88 - xlnx,zynqmp-ipi-dest-mailbox
89 - xlnx,versal-ipi-dest-mailbox
99 xlnx,ipi-id:
115 - xlnx,zynqmp-ipi-dest-mailbox
146 - xlnx,ipi-id
153 - xlnx,ipi-id
[all …]
|
| /linux/arch/arm64/boot/dts/xilinx/ |
| H A D | zynqmp.dtsi | 15 #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
19 #include <dt-bindings/power/xlnx-zynqmp-power.h>
20 #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
24 compatible = "xlnx,zynqmp";
146 compatible = "xlnx,zynqmp-ipi-mailbox";
149 xlnx,ipi-id = <0>;
156 compatible = "xlnx,zynqmp-ipi-dest-mailbox";
166 xlnx,ipi-id = <4>;
201 compatible = "xlnx,zynqmp-firmware";
208 compatible = "xlnx,zynqmp-power";
[all …]
|
| /linux/Documentation/devicetree/bindings/timer/ |
| H A D | xlnx,xps-timer.yaml | 4 $id: http://devicetree.org/schemas/timer/xlnx,xps-timer.yaml#
15 const: xlnx,xps-timer-1.00.a
31 xlnx,count-width:
38 xlnx,one-timer-only:
47 - xlnx,one-timer-only
58 xlnx,one-timer-only:
77 compatible = "xlnx,xps-timer-1.00.a";
80 xlnx,count-width = <16>;
81 xlnx,one-timer-only = <0x0>;
88 compatible = "xlnx,xps-timer-1.00.a";
[all …]
|
| /linux/Documentation/devicetree/bindings/net/ |
| H A D | xlnx,axi-ethernet.yaml | 4 $id: http://devicetree.org/schemas/net/xlnx,axi-ethernet.yaml#
27 - xlnx,axi-ethernet-1.00.a
28 - xlnx,axi-ethernet-1.01.a
29 - xlnx,axi-ethernet-2.01.a
53 xlnx,rxmem:
66 xlnx,phy-type:
72 xlnx,txcsum:
80 xlnx,rxcsum:
88 xlnx,switch-x-sgmii:
144 - xlnx,rxmem
[all …]
|
| /linux/Documentation/devicetree/bindings/net/can/ |
| H A D | xilinx,can.yaml | 16 - xlnx,zynq-can-1.0
17 - xlnx,axi-can-1.00.a
18 - xlnx,canfd-1.0
19 - xlnx,canfd-2.0
52 xlnx,has-ecc:
72 - xlnx,zynq-can-1.0
89 - xlnx,axi-can-1.00.a
106 - xlnx,canfd-1.0
107 - xlnx,canfd-2.0
124 compatible = "xlnx,zynq-can-1.0";
[all …]
|
| /linux/Documentation/devicetree/bindings/iio/adc/ |
| H A D | xilinx-xadc.txt | 23 * "xlnx,zynq-xadc-1.00.a": When using the ZYNQ device
25 * "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to
27 * "xlnx,system-management-wiz-1.3": When using the
37 - xlnx,external-mux:
44 - xlnx,external-mux-channel: Configures which pair of pins is used to
82 * xlnx,bipolar: If set the channel is used in bipolar
88 compatible = "xlnx,zynq-xadc-1.00.a";
94 xlnx,channels {
110 compatible = "xlnx,axi-xadc-1.00.a";
116 xlnx,channels {
[all …]
|
| /linux/Documentation/devicetree/bindings/spi/ |
| H A D | spi-xilinx.yaml | 18 - xlnx,xps-spi-2.00.a
19 - xlnx,xps-spi-2.00.b
20 - xlnx,axi-quad-spi-1.00.a
28 xlnx,num-ss-bits:
33 xlnx,num-transfer-bits:
48 compatible = "xlnx,xps-spi-2.00.a";
52 xlnx,num-ss-bits = <0x1>;
53 xlnx,num-transfer-bits = <32>;
|
| /linux/Documentation/devicetree/bindings/watchdog/ |
| H A D | xlnx,xps-timebase-wdt.yaml | 4 $id: http://devicetree.org/schemas/watchdog/xlnx,xps-timebase-wdt.yaml#
27 - xlnx,xps-timebase-wdt-1.01.a
28 - xlnx,xps-timebase-wdt-1.00.a
39 xlnx,wdt-interval:
45 xlnx,wdt-enable-once:
61 compatible = "xlnx,xps-timebase-wdt-1.00.a";
65 xlnx,wdt-enable-once = <0x0>;
66 xlnx,wdt-interval = <0x1b>;
|