/linux/Documentation/devicetree/bindings/memory-controllers/ |
H A D | rockchip,rk3399-dmc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Brian Norris <briannorris@chromium.org> 15 - rockchip,rk3399-dmc 17 devfreq-events: 18 $ref: /schemas/types.yaml#/definitions/phandle 26 clock-names: 28 - const: dmc_clk [all …]
|
H A D | st,stm32-fmc2-ebi-props.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Christophe Kerello <christophe.kerello@foss.st.com> 11 - Marek Vasut <marex@denx.de> 14 st,fmc2-ebi-cs-transaction-type: 29 $ref: /schemas/types.yaml#/definitions/uint32 33 st,fmc2-ebi-cs-cclk-enable: 34 description: Continuous clock enable (first bank must be configured [all …]
|
H A D | ti,gpmc-child.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Tony Lindgren <tony@atomide.com> 11 - Roger Quadros <rogerq@kernel.org> 24 gpmc,sync-clk-ps: 25 description: Minimum clock period for synchronous mode 28 # Chip-select signal timings corresponding to GPMC_CONFIG2: 29 gpmc,cs-on-ns: [all …]
|
/linux/Documentation/devicetree/bindings/i2c/ |
H A D | snps,designware-i2c.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only 3 --- 4 $id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Jarkko Nikula <jarkko.nikula@linux.intel.com> 13 - $ref: /schemas/i2c/i2c-controller.yaml# 14 - if: 19 const: mscc,ocelot-i2c 28 - description: Generic Synopsys DesignWare I2C controller 29 const: snps,designware-i2c [all …]
|
/linux/Documentation/devicetree/bindings/mmc/ |
H A D | cdns,sdhci.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Masahiro Yamada <yamada.masahiro@socionext.com> 15 - enum: 16 - amd,pensando-elba-sd4hc 17 - microchip,mpfs-sd4hc 18 - microchip,pic64gx-sd4hc 19 - mobileye,eyeq-sd4hc 20 - socionext,uniphier-sd4hc [all …]
|
/linux/Documentation/devicetree/bindings/usb/ |
H A D | snps,dwc3-common.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/usb/snps,dwc3-common.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Felipe Balbi <balbi@kernel.org> 14 vendor-specific implementation or as a standalone component. 17 - $ref: usb-drd.yaml# 18 - if: 24 - dr_mode 26 $ref: usb.yaml# [all …]
|
/linux/kernel/time/ |
H A D | namespace.c | 1 // SPDX-License-Identifier: GPL-2.0 31 offset = timespec64_to_ktime(ns_offsets->monotonic); in do_timens_ktime_to_host() 35 offset = timespec64_to_ktime(ns_offsets->boottime); in do_timens_ktime_to_host() 47 * User can specify @tim *absolute* value - if it's lesser than in do_timens_ktime_to_host() 48 * the time namespace's offset - it's already expired. in do_timens_ktime_to_host() 60 static struct ucounts *inc_time_namespaces(struct user_namespace *ns) in inc_time_namespaces() argument 62 return inc_ucount(ns, current_euid(), UCOUNT_TIME_NAMESPACES); in inc_time_namespaces() 71 * clone_time_ns - Clone a time namespace 82 struct time_namespace *ns; in clone_time_ns() local 86 err = -ENOSPC; in clone_time_ns() [all …]
|
/linux/include/uapi/linux/ |
H A D | comedi.h | 1 /* SPDX-License-Identifier: LGPL-2.0+ WITH Linux-syscall-note */ 6 * COMEDI - Linux Control and Measurement Device Interface 7 * Copyright (C) 1998-2001 David A. Schleef <ds@schleef.org> 32 * NOTE: 'comedi_config --init-data' is deprecated 40 /* length of nth chunk of firmware data -*/ 73 #define AREF_GROUND 0x00 /* analog ref = analog ground */ 74 #define AREF_COMMON 0x01 /* analog ref = analog common */ 75 #define AREF_DIFF 0x02 /* analog ref = differential */ 76 #define AREF_OTHER 0x03 /* analog ref = other (undefined) */ 78 /* counters -- these are arbitrary values */ [all …]
|
/linux/drivers/comedi/drivers/ |
H A D | rtd520.c | 1 // SPDX-License-Identifier: GPL-2.0+ 6 * COMEDI - Linux Control and Measurement Device Interface 13 * Devices: [Real Time Devices] DM7520HR-1 (DM7520), DM7520HR-8, 14 * PCI4520 (PCI4520), PCI4520-8 16 * Status: Works. Only tested on DM7520-8. Not SMP safe. 24 * The PCI4520 is a PCI card. The DM7520 is a PC/104-plus card. 40 * These boards can support external multiplexors and multi-board 71 * Analog-In supports instruction and command mode. 73 * With DMA, you can sample at 1.15Mhz with 70% idle on a 400Mhz K6-2 75 * using DMA with ALI-15xx based systems. I haven't been able to test [all …]
|
/linux/tools/perf/Documentation/ |
H A D | perf-report.txt | 1 perf-report(1) 5 ---- 6 perf-report - Read perf.data (created by perf record) and display the profile 9 -------- 11 'perf report' [-i <file> | --input=file] 14 ----------- 19 ------- 20 -i:: 21 --input=:: 24 -v:: [all …]
|
/linux/drivers/net/ethernet/stmicro/stmmac/ |
H A D | dwmac-qcom-ethqos.c | 1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (c) 2018-19, Linaro Limited 126 return readl(ethqos->rgmii_base + offset); in rgmii_readl() 132 writel(value, ethqos->rgmii_base + offset); in rgmii_writel() 148 struct device *dev = ðqos->pdev->dev; in rgmii_dump() 176 if (!phy_interface_mode_is_rgmii(ethqos->phy_mode)) in ethqos_update_link_clk() 181 ethqos->link_clk_rate = rate * 2; in ethqos_update_link_clk() 183 clk_set_rate(ethqos->link_clk, ethqos->link_clk_rate); in ethqos_update_link_clk() 189 if (!ethqos->needs_sgmii_loopback || in qcom_ethqos_set_sgmii_loopback() 190 ethqos->phy_mode != PHY_INTERFACE_MODE_2500BASEX) in qcom_ethqos_set_sgmii_loopback() [all …]
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mp-data-modul-edm-sbc.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include <dt-bindings/net/qca-ar803x.h> 9 #include <dt-bindings/phy/phy-imx8-pcie.h> 14 compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp"; 22 stdout-path = &uart3; 32 compatible = "pwm-backlight"; 33 pinctrl-names = "default"; 34 pinctrl-0 = <&pinctrl_panel_backlight>; 35 brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>; [all …]
|
/linux/Documentation/networking/ |
H A D | can.rst | 2 SocketCAN - Controller Area Network 20 .. _socketcan-motivation: 29 functionality. Usually, there is only a hardware-specific device 32 Queueing of frames and higher-level transport protocols like ISO-TP 34 character-device implementations support only one single process to 47 protocol family module and also vice-versa. Also, the protocol family 57 communicate using a specific transport protocol, e.g. ISO-TP, just 60 CAN-IDs, frames, etc. 62 Similar functionality visible from user-space could be provided by a 74 * **Abstraction:** In most existing character-device implementations, the [all …]
|
/linux/drivers/gpu/drm/i915/ |
H A D | i915_perf.c | 2 * Copyright © 2015-2016 Intel Corporation 44 * without special privileges. Access to system-wide metrics requires root 58 * might sample sets of tightly-coupled counters, depending on the 70 * interleaved with event-type specific members. 76 * would be acceptable to expose them to unprivileged applications - to hide 96 * side-band OA data captured via MI_REPORT_PERF_COUNT commands; we're 102 * For posterity, in case we might re-visit trying to adapt core perf to be 106 * - The perf based OA PMU driver broke some significant design assumptions: 110 * implications, the need to fake cpu-related data (such as user/kernel 112 * as a way to forward device-specific status records. [all …]
|
/linux/drivers/gpu/drm/ |
H A D | drm_vblank.c | 57 * For historical reference, the vertical blanking period was designed to 91 * "Physical top of display" is the reference point for the high-precision/ 95 * vertical blanking period so that settings like gamma, the image buffer 109 * tear-free display, users must synchronize page flips and/or rendering to 114 * involves filtering out spurious interrupts, keeping race-free blanking 115 * counters, coping with counter wrap-around and resets and keeping use counts. 133 * On many hardware disabling the vblank interrupt cannot be done in a race-free 139 * Drivers for hardware without support for vertical-blanking interrupts 166 MODULE_PARM_DESC(vblankoffdelay, "Delay until vblank irq auto-disable [msecs] (0: never disable, <0… 172 return &dev->vblank[pipe]; in drm_vblank_crtc() [all …]
|
/linux/kernel/events/ |
H A D | core.c | 1 // SPDX-License-Identifier: GPL-2.0 6 * Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar 7 * Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra 49 #include <linux/sched/clock.h> 58 #include <linux/percpu-rwsem.h> 76 struct task_struct *p = tfc->p; in remote_function() 79 /* -EAGAIN */ in remote_function() 88 tfc->ret = -ESRCH; /* No such (running) process */ in remote_function() 93 tfc->ret = tfc->func(tfc->info); in remote_function() 97 * task_function_call - call a function on the cpu on which a task runs [all …]
|
/linux/drivers/gpu/drm/imagination/ |
H A D | pvr_rogue_fwif.h | 1 /* SPDX-License-Identifier: GPL-2.0-only OR MIT */ 42 /* String used in pvrdebug -h output */ 140 /* Firmware per-DM HWR states */ 155 /* DM was identified as over-running and causing HWR */ 157 /* DM was innocently affected by another DM over-running which caused HWR */ 270 /* Identify whether MC config is P-P or P-S */ 274 /* per-os firmware shared data */ 297 /* Firmware trace time-stamp field breakup */ 303 /* Extra debug-info (16 bits) */ 307 /* Debug-info sub-fields */ [all …]
|
/linux/kernel/bpf/ |
H A D | helpers.c | 1 // SPDX-License-Identifier: GPL-2.0-only 2 /* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com 6 #include <linux/bpf-cgroup.h> 35 * inside its own verifier_ops->get_func_proto() callback it should return 47 return (unsigned long) map->ops->map_lookup_elem(map, key); in BPF_CALL_2() 64 return map->ops->map_update_elem(map, key, value, flags); in BPF_CALL_4() 82 return map->ops->map_delete_elem(map, key); in BPF_CALL_2() 96 return map->ops->map_push_elem(map, value, flags); in BPF_CALL_3() 111 return map->ops->map_pop_elem(map, value); in BPF_CALL_2() 124 return map->ops->map_peek_elem(map, value); in BPF_CALL_2() [all …]
|
/linux/drivers/net/wireless/ralink/rt2x00/ |
H A D | rt2800.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 3 Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> 283 * AUX_CTRL: Aux/PCI-E related configuration 529 * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. 557 * CLOCK CYCLE: Clock cycle count in 1us. 573 * HOST-MCU shared memory 773 * 0: 1-BSSID mode (BSS index = 0) 774 * 1: 2-BSSID mode (BSS index: Byte5, bit 0) 775 * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) 776 * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) [all …]
|
/linux/drivers/net/ethernet/sfc/siena/ |
H A D | mcdi_pcol.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */ 4 * Copyright 2009-2018 Solarflare Communications Inc. 5 * Copyright 2019-2020 Xilinx Inc. 13 /* Power-on reset state */ 35 /* The 'doorbell' addresses are hard-wired to alert the MC when written */ 38 /* The rest of these are firmware-defined */ 46 /* Values to be written to the per-port status dword in shared 71 * | | \--- Response 72 * | \------- Error 73 * \------------------------------ Resync (always set) [all …]
|
/linux/include/net/ |
H A D | sock.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 13 * Corey Minyard <wf-rch!minyard@relay.EU.net> 14 * Florian La Roche <flla@stud.uni-sb.de> 57 #include <linux/cgroup-defs.h> 79 /* This is the per-socket lock. The spinlock provides a synchronization 81 * mini-semaphore synchronizes multiple users amongst themselves. 88 * We express the mutex-alike socket_lock semantics 106 * struct sock_common - minimal network layer representation of sockets 109 * @skc_addrpair: 8-byte-aligned __u64 union of @skc_daddr & @skc_rcv_saddr 120 * @skc_net_refcnt: socket is using net ref counting [all …]
|