| /linux/Documentation/admin-guide/media/ |
| H A D | imx7.rst | 1 .. SPDX-License-Identifier: GPL-2.0
7 ------------
14 - CMOS Sensor Interface (CSI)
15 - Video Multiplexer
16 - MIPI CSI-2 Receiver
18 .. code-block:: none
20 MIPI Camera Input ---> MIPI CSI-2 --- > |\
24 | U | ------> CSI ---> Capture
27 Parallel Camera Input ----------------> | /
34 --------
[all …]
|
| H A D | imx.rst | 1 .. SPDX-License-Identifier: GPL-2.0
7 ------------
15 - Image DMA Controller (IDMAC)
16 - Camera Serial Interface (CSI)
17 - Image Converter (IC)
18 - Sensor Multi-FIFO Controller (SMFC)
19 - Image Rotator (IRT)
20 - Video De-Interlacing or Combining Block (VDIC)
26 re-ordering (for example UYVY to YUYV) within the same colorspace, and
27 packed <--> planar conversion. The IDMAC can also perform a simple
[all …]
|
| H A D | starfive_camss.rst | 1 .. SPDX-License-Identifier: GPL-2.0
10 ------------
24 ----------------------------------
28 |\ +---------------+ +-----------+
29 +----------+ | \ | | | |
31 | MIPI |----->| |----->| ISP |----->| |
33 +----------+ | | | | | Memory |
34 |MUX| +---------------+ | Interface |
35 +----------+ | | | |
36 | | | |---------------------------->| |
[all …]
|
| /linux/drivers/staging/media/tegra-video/ |
| H A D | csi.c | 1 // SPDX-License-Identifier: GPL-2.0-only
16 #include <media/v4l2-fwnode.h>
18 #include "csi.h"
35 * CSI is a separate subdevice which has 6 source pads to generate
36 * test pattern. CSI subdevice pad ops are used only for TPG and
70 return -ENOIOCTLCMD; in csi_enum_bus_code()
72 if (code->index >= ARRAY_SIZE(tegra_csi_tpg_fmts)) in csi_enum_bus_code()
73 return -EINVAL; in csi_enum_bus_code()
75 code->code = tegra_csi_tpg_fmts[code->index].code; in csi_enum_bus_code()
87 return -ENOIOCTLCMD; in csi_get_format()
[all …]
|
| H A D | csi.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */
9 #include <media/media-entity.h>
10 #include <media/v4l2-async.h>
11 #include <media/v4l2-subdev.h>
14 * Each CSI brick supports max of 4 lanes that can be used as either
15 * one x4 port using both CILA and CILB partitions of a CSI brick or can
22 /* Maximum 2 CSI x4 ports can be ganged up for streaming */
25 /* each CSI channel can have one sink and one source pads */
42 * struct tegra_csi_channel - Tegra CSI channel
48 * @csi: Tegra CSI device structure
[all …]
|
| /linux/Documentation/devicetree/bindings/media/xilinx/ |
| H A D | xlnx,csi2rxss.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Xilinx MIPI CSI-2 Receiver Subsystem
10 - Vishal Sagar <vishal.sagar@amd.com>
13 The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2
16 The subsystem consists of a MIPI D-PHY in slave mode which captures the
17 data packets. This is passed along the MIPI CSI-2 Rx IP which extracts the
20 For more details, please refer to PG232 Xilinx MIPI CSI-2 Receiver Subsystem.
21 Please note that this bindings includes only the MIPI CSI-2 Rx controller
[all …]
|
| /linux/Documentation/devicetree/bindings/soc/imx/ |
| H A D | fsl,imx8mm-disp-blk-ctrl.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX8MM DISP blk-ctrl
10 - Lucas Stach <l.stach@pengutronix.de>
13 The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to
14 the NoC and ensuring proper power sequencing of the display and MIPI CSI
20 - const: fsl,imx8mm-disp-blk-ctrl
21 - const: syscon
[all …]
|
| H A D | fsl,imx8mn-disp-blk-ctrl.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX8MN DISP blk-ctrl
10 - Lucas Stach <l.stach@pengutronix.de>
13 The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
14 the NoC and ensuring proper power sequencing of the display and MIPI CSI
20 - const: fsl,imx8mn-disp-blk-ctrl
21 - const: syscon
[all …]
|
| /linux/drivers/media/platform/rockchip/rkisp1/ |
| H A D | rkisp1-csi.c | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Rockchip ISP1 Driver - CSI-2 Receiver
16 #include <linux/phy/phy-mipi-dphy.h>
18 #include <media/v4l2-ctrls.h>
19 #include <media/v4l2-fwnode.h>
21 #include "rkisp1-common.h"
22 #include "rkisp1-csi.h"
37 struct rkisp1_csi *csi = &rkisp1->csi; in rkisp1_csi_link_sensor() local
40 s_asd->pixel_rate_ctrl = v4l2_ctrl_find(sd->ctrl_handler, in rkisp1_csi_link_sensor()
42 if (!s_asd->pixel_rate_ctrl) { in rkisp1_csi_link_sensor()
[all …]
|
| /linux/Documentation/devicetree/bindings/media/ |
| H A D | nxp,imx-mipi-csi2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
10 - Rui Miguel Silva <rmfrfs@gmail.com>
11 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
13 description: |-
14 The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
19 While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
[all …]
|
| H A D | allwinner,sun8i-a83t-mipi-csi2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-mipi-csi2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A83T MIPI CSI-2
10 - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
14 const: allwinner,sun8i-a83t-mipi-csi2
24 - description: Bus Clock
25 - description: Module Clock
26 - description: MIPI-specific Clock
[all …]
|
| H A D | imx.txt | 5 ---------------------------
12 - compatible : "fsl,imx-capture-subsystem";
13 - ports : Should contain a list of phandles pointing to camera
18 capture-subsystem {
19 compatible = "fsl,imx-capture-subsystem";
25 --------------
27 This is the device node for the MIPI CSI-2 Receiver core in the i.MX
28 SoC. This is a Synopsys Designware MIPI CSI-2 host controller core
29 combined with a D-PHY core mixed into the same register block. In
30 addition this device consists of an i.MX-specific "CSI2IPU gasket"
[all …]
|
| H A D | allwinner,sun6i-a31-mipi-csi2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A31 MIPI CSI-2
10 - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
15 - const: allwinner,sun6i-a31-mipi-csi2
16 - items:
17 - const: allwinner,sun8i-v3s-mipi-csi2
18 - const: allwinner,sun6i-a31-mipi-csi2
[all …]
|
| H A D | video-interfaces.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/video-interfaces.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sakari Ailus <sakari.ailus@linux.intel.com>
11 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
29 #address-cells = <1>;
30 #size-cells = <0>;
45 a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
49 specify #address-cells, #size-cells properties independently for the 'port'
[all …]
|
| H A D | renesas,rzg2l-csi2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
11 - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
14 The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
15 (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
21 - enum:
22 - renesas,r9a07g043-csi2 # RZ/G2UL
[all …]
|
| H A D | nxp,imx8mq-mipi-csi2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX8MQ MIPI CSI-2 receiver
10 - Martin Kepplinger <martin.kepplinger@puri.sm>
12 description: |-
13 This binding covers the CSI-2 RX PHY and host controller included in the
20 - fsl,imx8mq-mipi-csi2
27 - description: core is the RX Controller Core Clock input. This clock
[all …]
|
| /linux/drivers/acpi/ |
| H A D | mipi-disco-img.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * MIPI DisCo for Imaging support.
7 * Support MIPI DisCo for Imaging by parsing ACPI _CRS CSI-2 records defined in
8 * Section 6.4.3.8.2.4 "Camera Serial Interface (CSI-2) Connection Resource
9 * Descriptor" of ACPI 6.5 and using device properties defined by the MIPI DisCo
12 * The implementation looks for the information in the ACPI namespace (CSI-2
14 * Documentation/firmware-guide/acpi/dsd/graph.rst to represent the CSI-2
16 * extracted from the _CRS CSI-2 resource descriptors and the MIPI DisCo
18 * with CSI-2 connections.
31 #include <media/v4l2-fwnode.h>
[all …]
|
| /linux/Documentation/userspace-api/media/v4l/ |
| H A D | metafmt-generic.rst | 1 .. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
8 Generic line-based metadata formats
14 These generic line-based metadata formats define the memory layout of the data
17 .. _v4l2-meta-fmt-generic-8:
20 -----------------------
22 The V4L2_META_FMT_GENERIC_8 format is a plain 8-bit metadata format. This format
23 is used on CSI-2 for 8 bits per :term:`Data Unit`.
26 packed into one 16-bit Data Unit. Otherwise the 16 bits per pixel dataformat is
27 :ref:`V4L2_META_FMT_GENERIC_CSI2_16 <v4l2-meta-fmt-generic-csi2-16>`.
34 .. flat-table:: Sample 4x2 Metadata Frame
[all …]
|
| /linux/drivers/media/platform/nxp/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
8 tristate "NXP CSI Bridge driver"
17 Driver for the NXP Camera Sensor Interface (CSI) Bridge. This device
21 tristate "NXP i.MX8MQ MIPI CSI-2 receiver"
28 Video4Linux2 driver for the MIPI CSI-2 receiver found on the i.MX8MQ
32 tristate "NXP MIPI CSI-2 CSIS receiver found on i.MX7 and i.MX8 models"
39 Video4Linux2 sub-device driver for the MIPI CSI-2 CSIS receiver
42 source "drivers/media/platform/nxp/imx8-isi/Kconfig"
53 The i.MX Pixel Pipeline is a memory-to-memory engine for scaling,
57 tristate "NXP MX2 eMMa-PrP support"
[all …]
|
| /linux/Documentation/devicetree/bindings/media/i2c/ |
| H A D | tc358743.txt | 1 * Toshiba TC358743 HDMI-RX to MIPI CSI2-TX Bridge
3 The Toshiba TC358743 HDMI-RX to MIPI CSI2-TX (H2C) is a bridge that converts
4 a HDMI stream to MIPI CSI-2 TX. It is programmable through I2C.
8 - compatible: value should be "toshiba,tc358743"
9 - clocks, clock-names: should contain a phandle link to the reference clock
14 - reset-gpios: gpio phandle GPIO connected to the reset pin
15 - interrupts: GPIO connected to the interrupt pin
16 - data-lanes: should be <1 2 3 4> for four-lane operation,
17 or <1 2> for two-lane operation
18 - clock-lanes: should be <0>
[all …]
|
| H A D | toshiba,tc358746.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Toshiba TC358746 Parallel to MIPI CSI2 Bridge
10 - Marco Felsch <kernel@pengutronix.de>
12 description: |-
13 The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2
14 stream. The direction can be either parallel-in -> csi-out or csi-in ->
15 parallel-out The chip is programmable through I2C and SPI but the SPI
16 interface is only supported in parallel-in -> csi-out mode.
[all …]
|
| /linux/Documentation/driver-api/media/ |
| H A D | tx-rx.rst | 1 .. SPDX-License-Identifier: GPL-2.0
3 .. _transmitter-receiver:
10 CSI-2 receiver in an SoC.
13 ---------
17 MIPI CSI-2
20 CSI-2 is a data bus intended for transferring images from cameras to
21 the host SoC. It is defined by the `MIPI alliance`_.
23 .. _`MIPI alliance`: https://www.mipi.org/
32 .. _`BT.656`: https://en.wikipedia.org/wiki/ITU-R_BT.656
35 -------------------
[all …]
|
| /linux/Documentation/devicetree/bindings/phy/ |
| H A D | rockchip-inno-csi-dphy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Rockchip SoC MIPI RX0 D-PHY
10 - Heiko Stuebner <heiko@sntech.de>
13 The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP which
14 connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras.
19 - rockchip,px30-csi-dphy
20 - rockchip,rk1808-csi-dphy
[all …]
|
| /linux/include/media/ |
| H A D | v4l2-mediabus.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */
11 #include <linux/v4l2-mediabus.h>
60 /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
62 /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
64 /* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */
71 /* Clock non-continuous mode support. */
77 * struct v4l2_mbus_config_mipi_csi2 - MIPI CSI-2 data bus configuration
94 * struct v4l2_mbus_config_parallel - parallel data bus configuration
106 * struct v4l2_mbus_config_mipi_csi1 - CSI-1/CCP2 data bus configuration
108 * false - not inverted, true - inverted
[all …]
|
| /linux/drivers/pmdomain/imx/ |
| H A D | imx8m-blk-ctrl.c | 1 // SPDX-License-Identifier: GPL-2.0+
19 #include <dt-bindings/power/imx8mm-power.h>
20 #include <dt-bindings/power/imx8mn-power.h>
21 #include <dt-bindings/power/imx8mp-power.h>
22 #include <dt-bindings/power/imx8mq-power.h>
51 * which is used to control the reset for the MIPI Phy.
53 * an if-statement should be used before setting and clearing this
88 const struct imx8m_blk_ctrl_domain_data *data = domain->data; in imx8m_blk_ctrl_power_on()
89 struct imx8m_blk_ctrl *bc = domain->bc; in imx8m_blk_ctrl_power_on()
93 ret = pm_runtime_get_sync(bc->bus_power_dev); in imx8m_blk_ctrl_power_on()
[all …]
|