| /linux/drivers/gpio/ |
| H A D | gpio-xtensa.c | 6 * Driver for the Xtensa LX4 GPIO32 Option
10 * GPIO32 is a standard optional extension to the Xtensa architecture core that
12 * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
16 * Access to GPIO32 specific instructions is controlled by the CPENABLE
19 * corresponding to GPIO32 before any GPIO32 specific instruction, and restores
22 * This driver is currently incompatible with SMP. The GPIO32 extension is not
37 #error GPIO32 option is not enabled for your xtensa core variant
168 MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
|
| /linux/drivers/pinctrl/qcom/ |
| H A D | pinctrl-ipq5018.c | 424 "gpio22", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
445 "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", "gpio36",
502 "gpio31", "gpio32", "gpio33", "gpio34",
506 "gpio31", "gpio32", "gpio33", "gpio34",
586 "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
|
| /linux/drivers/pinctrl/airoha/ |
| H A D | pinctrl-an7563.c | 13 * pins 32-35 -> SPI_CLK/SPI_CS/SPI_MOSI/SPI_MISO pads (GPIO32-GPIO35)
65 #define SPI_CLK_GPIO_MODE_MASK BIT(17) /* GPIO32 */
172 * (GPIO32-35) have no flash mode configuration bit.
354 PINCTRL_PIN(32, "spi_clk"), /* GPIO32 */
468 PINCTRL_PIN_GROUP("gpio32", gpio32),
490 "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
699 AIROHA_PINCTRL_GPIO("gpio32", SPI_CLK_GPIO_MODE_MASK),
|
| /linux/arch/arm/mach-pxa/ |
| H A D | mfp-pxa300.h | 305 #define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT)
312 #define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT)
513 #define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3)
537 #define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1)
559 #define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3)
|
| H A D | mfp-pxa25x.h | 100 #define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1)
108 #define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
|
| /linux/arch/arm/boot/dts/qcom/ |
| H A D | qcom-msm8926-samsung-matisselte.dts | 37 pins = "gpio32";
|
| /linux/drivers/pinctrl/bcm/ |
| H A D | pinctrl-bcm6362.c | 87 PINCTRL_PIN(32, "gpio32"),
192 BCM_PIN_GROUP(gpio32),
351 "gpio32",
|
| H A D | pinctrl-bcm63268.c | 96 PINCTRL_PIN(32, "gpio32"),
215 BCM_PIN_GROUP(gpio32),
351 "gpio32",
|
| H A D | pinctrl-bcm6318.c | 72 PINCTRL_PIN(32, "gpio32"),
176 BCM_PIN_GROUP(gpio32),
|
| /linux/arch/arm/boot/dts/broadcom/ |
| H A D | bcm2835-rpi-cm1-io1.dts | 51 "GPIO32",
|
| H A D | bcm2837-rpi-cm3-io3.dts | 51 "GPIO32",
|
| H A D | bcm2835-rpi-zero.dts | 64 "CAM_GPIO1", /* GPIO32 */
|
| H A D | bcm2835-rpi-b.dts | 62 "", /* GPIO32 */
|
| H A D | bcm2835-rpi-a.dts | 62 "", /* GPIO32 */
|
| H A D | bcm2835-rpi-b-plus.dts | 62 "CAM_GPIO1", /* GPIO32 */
|
| H A D | bcm2835-rpi-a-plus.dts | 60 "CAM_GPIO1", /* GPIO32 */
|
| H A D | bcm2835-rpi-b-rev2.dts | 62 "", /* GPIO32 */
|
| H A D | bcm2837-rpi-zero-2-w.dts | 74 "NC", /* GPIO32 */
|
| /linux/drivers/pinctrl/ |
| H A D | pinctrl-mlxbf3.c | 80 PINCTRL_PIN(32, "gpio32"),
118 "gpio32", "gpio33", "gpio34", "gpio35", "gpio36", "gpio37", "gpio38", "gpio39",
|
| H A D | pinctrl-lantiq.h | 139 GPIO32, enumerator
|
| /linux/arch/arm64/boot/dts/qcom/ |
| H A D | sc7180-trogdor-parade-ps8640.dtsi | 114 pins = "gpio32";
|
| H A D | apq8016-schneider-hmibsc.dts | 363 pins = "gpio32";
370 pins = "gpio32";
|
| /linux/arch/arm/boot/dts/nuvoton/ |
| H A D | nuvoton-npcm750-pincfg-evb.dtsi | 42 pins = "GPIO32/nSPI0CS1";
|
| /linux/Documentation/devicetree/bindings/pinctrl/ |
| H A D | cirrus,madera.yaml | 55 gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
|
| H A D | bitmain,bm1880-pinctrl.yaml | 84 gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
|